ADDN/ALTN TO COOK HOUSES OF OFFICERS MESS, AIRMEN MESS NO. 1 AND 3, SNCOS MESS, DSC MESS AND OLD POLICE BILLET AT AFS UNDER GE (AF) JORHAT

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n. exc. 4 Sqm each complete all as specified and as directed.

All as per Serial item No. 1 here-in-before but n. exc. 1.5 Sqm each

M&L for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling and fixing in opening as per specifications and drawing shown in SSR Part-II as approved complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specifications and drawing as shown in SSR Part-II complete all as specified and as directed.

S&F pressed steel frames of size 125mmx60mm, made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges lock strike plate etc. complete all as specified and as directed.

All as per Serial item No. 5 here-in-before but of size 105mmx60mm.

S&F 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a); and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick factory made 2nd class hard wood, plain, framed, panelled shutter (2 panels) with lock rail and panel of commercial ply or 12mm thick veneered particle board with 9mm BWP commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30mm thick flush shutters, solid core construction with block boards core and plywood face panels, commercial type on both sides with application of decorative laminate of approved colour and pattern complete all as specified and as directed.

M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and as directed.

S&F 100mm stainless steel butt hinges, medium weight, cold rolled of type B-21 complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150mm extruded aluminium alloy handles, cast type, anodised including screws complete all as specified and as directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

S&F flat iron of size 25x6mm as in hold fast, confirming to Fe-410-0 or Fe 310-0 including tarring or coal tar black paint complete all as specified and as directed.

S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n. exc. 200 Cu.cm each complete all as specified and as directed.

S&F aluminium powder coated of any colour (Minimum thickness of powder coating shall be 50 micron) as in window, sliding type, 3-track with frame size 100x35x1.2mm and shutter 40x18x0.9mm with two glass shutters with plain float glass of 4.0mm thick and one gauge shutter provided with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including necessary joining cleats, glazing clips, EPDM rubber/neoprene gasket packing and anodised aluminium fittings viz. locking arrangements, etc. all as per requirement at site complete all as specified and as directed Note : Cost of glass, wire clothes, aluminium jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, anodised aluminium fittings, screws, etc. all as per requirment at site of work will deemed to be inclusive with the quoted rate.

S&F aluminium powder coated of any olour (Minimum thickness of powder coating shall be 50 micron) as in window, sliding type, 2-track with frame section 50.3x26x1.2mm and 3 No shutters section 40x18x0.90mm with one glass shutter with plain float glass of 4.0mm thick and one gauge shutter provided with stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm including necessary joining cleats, glazing clips, EPDM rubber/ neoprene gasket packing and anodised aluminium fittings viz. locking arrangements, etc. all as per requirement at site of work complete all as specified and as directed Note : Cost of glass, wire clothes, aluminium jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, anodised aluminium fittings, screws, etc. all as per requirment at site of work will deemed to be inclusive with the quoted rate.

S&F aluminium louvered ventilators of frame section 50.3x26x1.2mm and 1 No shutter section 40x18x0.9mm, half portion adjustable type louvers including frosted glass 3.0mm thick and another half portion provided with stainless steel wire cloth 0:36mm nominal dia of wire and average width of aperture 1.40mm, fixed type on outside frame including necessary joining cleats glazing clips. EPDM rubber/neoprene gasket packing and anodised aluminium fittings viz locking arrangements, etc. all as per requirement at site of work complete all as specified and as directed. Note : Cost of glass, wire clothes, aluminium jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading, anodised aluminium fittings, screws, etc all as per requirment at site of work will deemed to be inclusive with the quoted rate.

S&F anodised aluminium deco grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening as per site requirement complete all as specified and as directed

M&L for preparation of new steel surfaces of any description over exc. 10cm girth or width and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.

Cutting holes in brick walls in cement mortar for inserting holdfasts and making good to dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as required depth of embedded portion of holdfasts, exc. half brick thick and not exc. one brick thick complete all as specified and as directed

S&F 12mm thick plywood grade BWP, type BB fixed with screws to timber frame work with 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instruction, fixed with screws to timber frame work for shutters, kitchen shelves, etc. complete all as specified and as directed.

S&F 100mm long stainless steel butt hinges type C-21 complete all as specified and as directed.

S&F 75mm size extruded aluminium alloy handles, cast type, anodised including the screws complete all as specified and as directed.

S&F 75mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, fixed as on floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, fixed as on dado, skirting, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for non skid ceramic coloured tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, fixed as on floors, etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for 25mm thick plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in sub base of floors complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size 300x200x7mm/450x300x7mm thick, fixed as on vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick screed bed/bedding in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring, 20-25mm thick over cement screed base laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring, 20-25mm thick as on riser of steps, skirting, dado and pillar, etc. laid over and and jointed over and including 10mm thick screed bed/bedding in cement mortar (1:4) complete all as specified and as directed.

Demolition stone slabs and tiles of any description or thickness as on floors, aprons laid and bedded and jointed in cement mortar, etc. complete all as specified and as directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed or bedding layer 15mm thick in cement mortar (1:6) complete all as specified and as directed.

S&F as in repairs sinks with drainage board of overall size 915mmx460mm and bowl size 410mmx330mm x160mm, made of stainless steel 1mm thick for kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and as directed.

Demolition of reinforced cement concrete for roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed.

M&L for RCC (1:2:4) type B-1 (using 20mm graded stone agregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) and making flat rough finished surfaces of concrete complete all as specified and as directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per Serial item No. 41 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, etc.

Dismantling water tanks of capacity exc. 250 litre and not exc. 500 litre complete all as specified and as directed.

S&F rotational moulded polyethylene (HDPE) water storage tank of 500 litre capacity (cylindrical vertical with closed top), black in colour, three layered construction, hoisted and fixed in position all specified in MES Schedule Part-I complete all as specified and as directed.

Dismantling of galvalume sheet (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc. fixed with self tapping screw complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc., fixed with self tapping screw complete all as specified and as directed.

S&F 0.63mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-290, Gde E-165 complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern). including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to store measured (overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F as in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement with 75mm outlet dia complete all as specified and as directed.

S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as direcetd.

S&F 75mm bore PVC (SWR) bends, any radius and jointing with solvent cement complete all as specified and as directed.

S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointing with solvent cement complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches complete all as specified and as direcetd. Note : Necessary earth works shall be measured and paid for seperately.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls or laid on floors complete all as specified and as direcetd.

S&F 110mm bore PVC (SWR) bends, any radius and jointing with solvent cement complete all as specified and as directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal and jointing with solvent cement complete all as specified and as directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections complete all as specified and as directed.

S&F 20mm bore GI tubing, "medium grade", with all fitting and fixed to walls/ceiling or laid in floors complete all as specified and as directed.

Re-fixing only GI tubing of 20mm bore, any grade, to walls/ceiling or laying in floors complete all as specified and as directed. Note : Old serviceable pipes obtained from taking down shall re-used.

Taking up or down 15mm bore steel tubing and connections complete all as specified and as directed

S&F 15mm bore GI tubing "medium grade" galvanised, with all fitting and fixed to walls/ceiling or laid in floors complete all as specified and as directed.

Re-fixing only GI tubing of 15mm bore, any grade, to walls and ceiling or laying in floors complete all as specified and as directed. Note : Old serviceable pipes obtained from taking down shall re-used.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good of cutting not exc. 10cm girth complete all as specified and as directed.

S&F as in repair for 15mm bib taps, cast copper alloy, fancy type, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F as in repairs for 15mm stop valves, cast copper alloy, fancy type, chromium plated with with long shank and cup (concealed type) for iron pipe of 15mm bore of pipe complete all as specified and as directed.

S&F as in repairs angle cock/stop valve of size 15mm dia, fancy type, cast copper alloy, chromium plated, high pressure with crutch handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F as in repairs PVC valveless syphonic action type flushing cistern, (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32mm bore PVC flush pipe, etc. complete all as specified and as directed.

S&F for vitreous china squatting pan, ‘Orissa’ pattern, size 580x440mm white, as approved, with integral foot rests (excluding flushing cistern and flush pipe) including trap set and concrete including connection to trap and to flushing pipe, anti syphonage pipem, etc. complete including making ggod to floors with bedding in PCC (1:5:10) type E-2 (using 40mm graded nominal brick ballast) and connection to trap with cement mortar and making good to floor including demolition of PCC/lime concrete bedding as required for existing pan complete all as specified and as directed.

S&F as in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed.

S&F as in repairs PVC waste outlet pipe, 32/40mm dia for WHB/kitchen sink including waste coupling complete all as specified and as directed.

S&F as in repairs PVC connections pipe of size 15mm dia with PTMT nuts of length 600mm complete all as specified and as directed.

S&F as in repairs 32mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/ 40mm-60 gms) complete all as specified and as directed.

S&F 20mm ball valves, high pressure of PTMT with epoxy coated aluminium rod and highdensity plastic ball, screwed for iron pipe (Minimum weight 20-210 gms) complete all as specified and as directed.

S&F as in repairs soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.

S&F as in repairs wash basins, vitreous china (flat back or angle back type) of size 580x450mm, white, including waste coupling fixed with 2 No. cadmium plated rag bolts of 10mm dia complete all as specified and as directed.

S&F as in repairs 15mm dia pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S&F as in repairs 20mm gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

All as per Serial item No. 81 here-in-before but of size 15mm.

Demolition of brick work, built in cement mortar complete all as specified and as directed.

M&L for brickwork (old size) with sub class ‘B’ bricks, straight or curved on plan, exc. 6m mean radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and as directed.

M&L for brickwork (old size) with sub class ‘B’ bricks, straight or curved on plan, exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Taking down cement or cement lime plaster from brick walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:4), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 5mm thick rendering in cement mortar (1:3) on fair faces of concrete surfaces of ceiling, finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preperation of new surfaces with finishing the exterior rough plasters surface to a smooth finish and applying two coats of exterior emulsion paint by use of mechanical equipments/applicators as per manufacuterer's instructions over one coat of true care exterior wall primer complete all as specified and as directed.

M&L for preperation of new plastered surfaces of walls and applying two coats of acrylic distemper over and including one coat of primer complete all as specified and as directed.

M&L for preperation of new plastred surfaces of ceiling and applying two coats of acrylic distemper over and including one coat of primer complete all as specified and as directed.

M&L for 50mm thick plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and as directed.

S&F as in repairs for 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm, fixes to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm eah with clips of 10.5mm fixed to the intermediate channel with connecting clips across the intermidiate channel of 457mm centre to centre all as specified and as directed.

M&L for 6mm thick perforated particle board/tiles for insulation and accoustic purposes, 60x60cm in size, fixed with nails to timber frame work or with staples on snap grid complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and as directed.

M&L for providing cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in drain, roof kerbs or mud stops, rounded or chamfered on edge including necessary form work complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as per specified and as directed.

M&L for providing cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in cover slabs for manhole/kitchen platforms, etc. with set in cement mortar (1:6) of concrete including necessary formwork complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as per specified and as directed.

M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and as directed.

M&L for 75mm thick plain cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in flooring complete all as specified and as directed.

M&L for 25mm sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for machine pressed precast concrete interlocking paver block of any shape and size confirming to IS : 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed

S&F for grating round 140mm size of PTMT (Minimum weight 50gms) complete all as specified and as directed.

S&F as in repairs health faucet (ABS body) mild steel, chromium plated suitable for 15mm dia pipe with 1.25m long, flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F as in repairs 50mm dia high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2, fixed complete to walls, ceilings or in floors, etc. complete all as specified and as directed.

M&L for preparation of old steel and iron surfaces of any description exc. 10cm width or girth and applying one coat of synthetic enamel paint (1st quality/grade paint of approved tint) complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description exc.10cm width or girth and applying one coat of synthetic enamel paint (1st quality/grade paint of approved tint) complete all as specified and as directed.

M&L for preparation of complete removal of existing surface treatments of walls and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new/old surface including wall care putty 1.5mm thick to make good undulation surface as required complete all as specified and as directed.

M&L for complete removal of existing treatment over surfaces of wall and applying two coats of acrylic distemper over and including one coat of primer and including making good undulation surface with wall care putty as required complete all as specified and as directed.

M&L for complete removal of existing treatment over surfaces of ceiling and applying two coats of acrylic distemper over and including one coat of primer and including making good undulation surface with wall care putty as required complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in new door/window complete all as specified and as directed.

S&F as in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in window and door as in old door/window complete all as specified and as directed.

Dismantling timber scantling, 40sq.cm and over in section, in any position, in unframed work complete all as specified and as directed.

M&L for 2nd class hard wood timber scantlings, clean sawn complete all as specified and as directed.

Exavation in trenches not exc. 1.50m wide and not exc. 1.50m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 sqm on plan and not exc. 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft & loose soil each not exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

M&L for hardcore of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Removing excavated materials (soils) exc. 250m but not exc. 500m and depositing where directed at a level not exc. 1.50m above the starting point in soft/loose soil complete all as specified and as directed.

S&F structural steel work in hollow tubular section (RHS or SHS) including special shaped washer, etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed.

Taking down carefully point wiring (light, fan, socket, etc.) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, sockets, etc. and making good to disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for point wiring with 1.5 sq.mm of FR grade PVC insulated and unsheathed stranded copper conductor cable, 1100 volts grade as per IS-694 drawn through and including PVC cassing and capping (not less than 20mm wide)/conduit complete with all acessories including PVC board/box of suitable size for mounting of switches, sockets, regulators, etc. including 1.5 sq.mm stranded copper conductor cable FR grade PVC insulated and unsheathed as earth continuity conductor for one light point controlled by one, one way switch complete by maintaining the colour code complete all as specified and as directed.

All as per Serial item No. 127 here-in-before but for one ceiling/exhaust fan point controlled by one, one way switch.

All as per Serial item No. 127 here-in-before but 5 amps socket point on independent board.

All as per Serial item No. 127 here-in-before but with 2.5 sq.mm cable for 15 amps socket outlet on independent board, using 2.5 sq.mm earth continuity conductor.

S&F ceiling rose surface backelite three terminals, PVC / polycarbonate insulated body complete all as specified and as directed.

S&F as in repairs switch piano, flush type, 6 amps, 240 volts, single pole one way complete all as specified and as directed.

S&F as in repairs socket outlet, 5 pin 6 Amps, flush type complete all as specified and as directed.

S&F as in repairs socket outlet 15/16 Amps, 6 in 1, flush type complete all as specified and as directed.

S&F as in repairs switch piano, flush type,15/16 Amps, 240 volts, single pole one way complete all as specified and as directed.

S&F as in repairs in repair fan regulator electronic type, rotary step, socket type 240 volts complete all as specified and as directed.

S&F as in repairs 20 watt integrated LED tube light fitting 4 feet, suitable for single phase 230 volts, 50 Hz AC supply and mounted on wall or ceiling, complete with all accessories internally prewired and including electrical connection with copper conductor cable of size 0.5 Sq.mm (nominal area) complete all as specified and as directed.

S&F 1200mm sweep ceiling fan, double ball bearing, AC motor, 230 volt, 50 Hz, 3 blades with upto 210mm long down rod, 02 numbers of canopies, power input 52 watt, 350 RPM, 100% copper winding, air delivery minimum 215cm, BEE star ratings with 2 years warranty, ISI rated including regulator and connecting up of cable from ceiling rose or connector to fan after and including taking down old existing unserviceable fan complete all as specified and as directed. Make : Usha, Model No. APOLLO LX 1 STAR ISI or equivalent model make as specified in Particular Specifications.

S&F exhaust fan of size 300mm sweep, heavy duty, steel body, AC single phase, 230 volts with blades, frame and louvers having not less than 1400 RPM providing connection with and including 3 core flexible copper conductor cable of suitable size and length including taking down and depositing the same into MES store yard complete all as specified and as directed. Make : Usha, Model No. 300mm S.PH TURBO HDEF 1400 RPM ISI or equivalent model make as specified in Particular Specifications.

S&F exhaust fan of size 450mm sweep, heavy duty, steel body, AC single phase, 230 volts with blades, frame and louvers having not less than 1400 RPM providing connection with and including 3 core flexible copper conductor cable of suitable size and length including taking down and depositing the same into MES store yard complete all as specified and as directed. Make : Usha, Model No. 450mm S.PH TURBO HDEF 1400 RPM ISI or equivalent model make as specified in Particular Specifications.

S&F wall mounted fan of size 400mm sweep, heavy duty, steel body, AC single phase, 230 volts with blades, frame and providing connection with and including 3 core flexible copper conductor cable of suitable size and length including taking down and depositing the same into MES store yard complete all as specified and as directed.

M&L cutting holes in brick wall for inserting of exhaust fan and making good to dismantled portion with cement concrete (1:2:4) (using 20mm stone aggregate) or in cement mortar (1:3) as required and adjoining surfaces in cement mortar (1:4) complete all as specified and as directed.

S&F Geyser 50 litrers capacity suitable to operate in single phase AC supply 230 volts, 50 Hz, BEE 5 star rating, and heating element of 2 KW including provision of grouting of suitable size nut bolts with supports of MS/wooden frame to support Geyser including PVC pipe for hot and cold water complete all as specified and as directed.

S&F sheet metal enclosures with plug top and MCBs single pole and natural enclosures with two pin and earth plug and socket complete with one single pole MCB, 32 Amps capacity complete all as specified and as directed.

S&F 15mm angular stop cock with cast flange, chromium plated complete all as specified and as directed.

S&F 15mm bore long body bib cock with cast flange chromium plated complete all as specified and as directed.

M&L for submain wiring with two runs of single core 6 sq.mm FRLS PVC insulated copper cable, 1100 volts grade multistrand, unsheathed conductor, drawn into PVC casing and capping and all necessary fittings including 1x6 sq.mm multi strand FRLS PVC insulated copper wire for earth continuty conductor connected to common earth dolly complete icomplete all as specified and as directed.

All as per Serial item No. 148 here-in-before but two runs of single core 4 Sq.mm for phase and neutral and 01 run of single core 4 Sq.mm for earth wire.

Taking down/out unserviceable or serviceable UG cables of any cross sectional area and connections including bricks, GI pipe, etc. of any descriptions, laid in trenches and/or fixing with walls/poles including segregating of serviceable materials viz bricks, cables, GI pipes, etc. and keep in safe custody for re-use complete all as specified and as directed. Note : Necessary excavation and earth work shall be measured and paid for separately.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 250mm thick in soft/loose soil complete all as specified and as directed.

Removing excavated materials not exceeding 50 mtr and depositing where directed at a level not exceeding 1.50 mtr above the starting point complete all as specified and as directed.

M&L for cable laying in trenches/passing through pipe/on wall of XLPE insulated, heavy duty, galvanished steel strip or wire armoured electric LT cable with stranded aluminium conductor for 1100 volts grade, cross sectional area 16 sqmm, 4 core complete all as specified and as directed. Note :- Rate of the saddle and clamp for fixing of cable on wall is to be deemed included with the quoting rate.

M&L for sand cushioning (dry) in trenches for protection of UG cable (below, above and around the UG cable laid in trenches) of 230mm spread thickness and consilidated (punned) upto 180mm thickness complete all as specified and as directed. Note : For the purpose of payment, punned thickness of sand cushioning only shall be measured and paid for.

S&F for sub-class 'B' bricks, well burnt, laid breadth-wise along the length of cable laid in trenches over sand cushion laid for UG cable protection complete all as specified and as directed.

Taking down MCB DB / Main switch of any size and type including making good to disturbed surface of wall/floor, etc. complete all as specified and as directed.

S&F as in repairs VTPN DB, 415 volt, 4 ways, 100 Amps bus bar with metal door having facility for MCCB incomming upto 250 Amps and MCB out going complete all as specified and as directed.

S&F as in repairs SP&N DBs, double door, 240 volt, 8 ways complete all as specified and as directed.

S&F as in repairs MCCB 160 Amps current carrying capacity 415 volts, 25 KA, 4 pole thermal magnetic type along with spreader terminals complete all as specified and as directed.

S&F as in repairs MCB single pole, 240 volts, 6-32 amps, 10 KA, 'C' curve complete all as specified and as directed.

S&F as in repairs MCB single pole and neutral, 240 volts, 32 Amps, 'C' curve in the MCB, DB with connection including testing complete all as specified and as directed.

M&L for earthing with galvanised steel earth plate electrode of size 600x600x6mm thick buried directly in ground vertically to a depth of not less than 2.25m below ground level, connected to GI strip of size 32x6mm as earthing lead means of nut, bolts and washers, made out of copper/brass and 40mm dia GI pipe 'light grade' for protection of earth lead and connected to test point or as directed including PCC pit in cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) and RCC cover of size 450x450x50mm in RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) reinforced with and including 8mm dia TMT bars @100mm centre to centre both ways, galvanised iron wiremesh, funnel, galvanised iron watering pipe 20mm bore 'medium grade', including necessary excavation and earth work in soft/loose soil complete, returning, filling in and removal of surplus soil upto a distance of 50m all as shown in Electrical Plate No. 5 of MES Schedule Part-I and testing on completion including taking down old existing unserviceable earthing complete all as specified and as directed. Note : GI strip upto 7.5m including testing is deemed included in the item.

M&L for 4mm dia galvanised iron or steel wire as earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing, etc. complete all as specified and as directed.

S&F LED luminaire 600mmx600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. NOTE : The contract sum shall be derieved by deducting the amount shown in Schedule of Credit attached to this tender from total amount of Schedule 'A'/BOQ.

Chief Builders &Consultants (BID ID -3496352)

RAJIB AND CO (BID ID -3495877)

M/S AT DHAR AND CO (BID ID -3495763)

4S ASSOCIATES (BID ID -3496310)

M/S Praduman Kumar Sharma (BID ID -3496395)

NIHAR ENTERPRISE (BID ID -3495872)

THE SUPPLY AGENCY (BID ID -3495874)

SUBHAS CONSTRUCTIONS (BID ID -3496474)

SHRI RAJEN PASWAN (BID ID -3495795)

Bidder Name

NIHAR ENTERPRISE

THE SUPPLY AGENCY

M/S Praduman Kumar Sharma

SHRI RAJEN PASWAN

RAJIB AND CO

Chief Builders &Consultants

M/S M R CONSTRUCTION & CO

M/S AT DHAR AND CO

4S ASSOCIATES

SUBHAS CONSTRUCTIONS