Supply and Construction of LMG/ PD

Constr Material:- Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja/Ultratech/ ACC/JK/ Dalmia) (For Tawang Circle)

Stone boulder 9" to 12" (For Tawang Circle)

Coarse Aggregate 40 to 63mm (For Tawang Circle)

Coarse sand free from vegetation (For Tawang Circle)

Coarse Aggregate 20mm graded (For Tawang Circle)

Coarse Aggregate 40mm graded (For Tawang Circle)

Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW (For Tawang Circle)

PBS Roll (20m Long , Width of 0.9Mtr ) (ISI Marked) with Min weight of 34 Kgs/Roll (For Tawang Circle)

GI biding wire (TATA/Sail/JSW) (For Tawang Circle)

Water proofing compund conforming to IS 2645-2003 (Make:- Pidilite/Dr Fixit/Fevicol) (For Tawang Circle)

Cement based paint (Snowcem) Make : Berger/Asian/Nerolac (For Tawang Circle)

Slack Lime (For Tawang Circle) (For Tawang Circle)

Painting Brush 4" (ISI Marked) (For Tawang Circle) (For Tawang Circle)

HDPE sand bags Khaki colour of size 15" x 30" inside laminated interlocking stiched, weight of the each bag should not be less than 42-45 gms/Bag (For Tawang Circle) (For Tawang Circle)

Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 (Make: Asian/Berger/Neroloc) (For Tawang Circle)

Synthetic paint enamelled OG conforming to IS 5-2004 (Make : Asian/Berger/Nerolac (For Tawang Circle)

Thinner. Make Nerolac/Berger/Asian (For Tawang Circle)

Steel Items:- SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA / SAIL /JSW) (For Tawang Circle)

SRT 1840 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA / SAIL /JSW) (For Tawang Circle)

ISMB hot rolled MS 200 x 100 and 4 mtr long. (Make : Tata/Sail/JSW) (For Tawang Circle)

Prefab mild steel door of size 750 x 1800 mm double shutter, outer frame made out of ISA 40 x 40 x 6mm and door shutter frame of ISA 35x35x5mm and all stiffner ISA 30x30x3mm as per drg. Steel shall conform to IS-800 (Make : TATA/SAIL/JSW (For Tawang Circle)

Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW) (For Tawang Circle)

Loop Holes 780 x 300 mm (Make:-TATA / SAIL /JSW) (For Tawang Circle) (For Tawang Circle)

Loop Holes 1000 x 300 mm (Make:-TATA / SAIL /JSW) (For Tawang Circle) (For Tawang Circle)

Loop Holes 1250 x 300 mm (Make:-TATA / SAIL /JSW) (For Tawang Circle)

Ventilator steel 600 x 450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with balce sheet of 1.00mm thich hold fast ISA 35x35x6mm and tower bolt 8mm dia 75mm long (Make : TATA/SAIL/JSW (For Tawang Circle)

Shuttering & Nails:- Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m (For Tawang Circle)

Wooden Scantling various sizes (For Tawang Circle)

Nails various size (For Tawang Circle)

Lightning Conductor:-- Air terminal single pointed aluminium rod 12mm dia and 300mm long (For Tawang Circle)

Testing point terminal block make of Gun metal & phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw (For Tawang Circle)

Aluminium strips 25x3mm (For Tawang Circle)

Galvanised iron strip 32x6mm (For Tawang Circle)

Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal/ Tata/ Kalinga) (For Tawang Circle)

Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side (For Tawang Circle)

CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame (For Tawang Circle)

Insulating PVC block 75x75x30mm with insulating clamp nut & bolt (Make-Presto/Polycab/ Finolex) (For Tawang Circle)

Charcoal (For Tawang Circle)

Salt (For Tawang Circle)

Constr Material:-Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 - 1989 (Make:-Birla Gold/Ambuja/Ultratech/ ACC/JK/ Dalmia) (For Gorsam Circle)

Stone boulder 9" to 12" (For Gorsam Circle)

Coarse Aggregate 40 to 63mm (For Gorsam Circle)

Coarse sand free from vegetation (For Gorsam Circle)

Coarse Aggregate 20mm graded (For Gorsam Circle)

Coarse Aggregate 40mm graded (For Gorsam Circle)

Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW (For Gorsam Circle)

PBS Roll (20m Long , Width of 0.9Mtr ) (ISI Marked) with Min weight of 34 Kgs/Roll (For Gorsam Circle)

GI biding wire (TATA/Sail/JSW) (For Gorsam Circle)

Water proofing compund conforming to IS 2645-2003 (Make:- Pidilite/Dr Fixit/Fevicol) (For Gorsam Circle)

Cement based paint (Snowcem) Make : Berger/Asian/Nerolac (For Gorsam Circle)

Slack Lime (For Tawang Circle) (For Gorsam Circle)

Painting Brush 4" (ISI Marked) (For Gorsam Circle) (For Gorsam Circle)

HDPE sand bags Khaki colour of size 15" x 30" inside laminated interlocking stiched, weight of the each bag should not be less than 42-45 gms/Bag (For Tawang Circle) (For Gorsam Circle)

Anti corrosive Red Oxide zinc chromate primer conforming to IS-5-2004 (Make: Asian/Berger/Neroloc) (For Gorsam Circle)

Synthetic paint enamelled OG conforming to IS 5-2004 (Make : Asian/Berger/Nerolac (For Gorsam Circle)

Thinner. Make Nerolac/Berger/Asian (For Gorsam Circle)

Steel Items:- SRT 2440 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA / SAIL /JSW) (For Gorsam Circle)

SRT 1840 x 613 x 180 , 2 mm thick MS Sheet Hot Rolled Steel with nuts & bolts incl One coat of Red Oxide (Make:-TATA / SAIL /JSW) (For Gorsam Circle)

ISMB hot rolled MS 200 x 100 and 4 mtr long. (Make : Tata/Sail/JSW) (For Gorsam Circle)

Prefab mild steel door of size 750 x 1800 mm double shutter, outer frame made out of ISA 40 x 40 x 6mm and door shutter frame of ISA 35x35x5mm and all stiffner ISA 30x30x3mm as per drg. Steel shall conform to IS-800 (Make : TATA/SAIL/JSW (For Gorsam Circle)

Mild steel Bar of size 6 to 8 mm dia conforming to IS 432 (Part I)1982 (Make : Tata/Sail/JSW) (For Gorsam Circle)

Loop Holes 780 x 300 mm (Make:-TATA / SAIL /JSW) (For Tawang Circle) (For Gorsam Circle)

Loop Holes 1000 x 300 mm (Make:-TATA / SAIL /JSW) (For Tawang Circle) (For Gorsam Circle)

Loop Holes 1250 x 300 mm (Make:-TATA / SAIL /JSW) (For Gorsam Circle)

Ventilator steel 600 x 450 mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm for shutter frame with balce sheet of 1.00mm thich hold fast ISA 35x35x6mm and tower bolt 8mm dia 75mm long (Make : TATA/SAIL/JSW (For Gorsam Circle)

Shuttering & Nails:- Wooden planks for shuttering IInd class wood of size 3.0 x 0.30 x 0.026m (For Gorsam Circle)

Wooden Scantling various sizes (For Gorsam Circle)

Nails various size (For Gorsam Circle)

Lightning Conductor:- Air terminal single pointed aluminium rod 12mm dia and 300mm long (For Gorsam Circle)

Testing point terminal block make of Gun metal & phosphorus bronze size 75x75x25mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screw (For Gorsam Circle)

Aluminium strips 25x3mm (For Gorsam Circle)

Galvanised iron strip 32x6mm (For Gorsam Circle)

Funnel fitted with 20mm dia GI Pipe 1.5m long Make Jindal/ Tata/ Kalinga) (For Gorsam Circle)

Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings, drilled with two nos holes for 6 mm dia near one side (For Gorsam Circle)

CI earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with MS frame (For Gorsam Circle)

Insulating PVC block 75x75x30mm with insulating clamp nut & bolt (Make-Presto/Polycab/ Finolex) (For Gorsam Circle)

Charcoal (For Gorsam Circle)

Salt (For Gorsam Circle)

NORBU ENTERPRISES (BID ID -3277526)

PARBIN SIDDIKI (BID ID -3277536)