SPECIAL REPAIR OF P/O/36 ORS MD ACCN AT TENGA LEDGE AND BLDG NO TE-288 AT MH UNDER GE TENGA

Amount

Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plinth protection finishing cement concrete surface even and smooth using extra cement complete all as specified and directed

M&L for Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigments complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified.

M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles complete all as specified and directed

M & L for Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed by Engr-in-Charge.

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed

M&L for Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed

Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc.

M & L 15 mm thick rendering in cement mortar 1:4 on brick or concrete surfaces using WPC @ 3% by weight of cement over 10mm thick backing coat in CM 1:4, finished even & smooth without using extra cement(WPC shall be measured seprately) complete all as specified and directed

M & L 15 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M & L 5 mm thick rendering on cement mortar 1:3 on brick or concrete surface in ceiling finished even & smooth without using extra cement complete all as specified and directed

Supply only intregal water proofing compound

Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD) , over a coat of alkali resistant primer by Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth all as specified

Material & Labour for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm complete all as specified and directed

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new plastered surfaces complete all as specified and directed

Material and labour for preparation of old distempered surface of wall incl washing down and stoping of distempered surface and appliying one coat of distemper oil emulsion by Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm

S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed

S & F Framed work as in doors or gates of angle or other sectionwith gusset plates, rails,braces, etc., complete, drilled forfixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

Material and labour for Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars,dovetailed or welded all as specified and directed.

M & L for applying two coat of synthetic enamel paint over a coat of red oxide primer to steel and iron surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new steel surfaces complete all as specified and directed.

Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

S&F 30mm Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as completed and specified as directed.

S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame to match all as completed and specified as directed.

S&F 30 mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats completed and specified as directed.

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.all as completed and specified as directed.

M&L for preparation of new wooden surfaces of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets

M&L for Plywood 12mm, grade BWR,type BB, fixed with screws to timber frame work fixed complete all as specified and directed

S&F MS window guard bars, window frames etc articles confirming to Fe 410-0 or Fe 310-0.

S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed.

S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed.

S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed

S& F Aluminium anodised barrel tower bolts 100mm long of extruded section and fixed

S & F 150mm size extruded aluminium alloy handles, fabricated type anodised

S & F 100mm size extruded aluminium alloy handles, fabricated type anodised

S & F aluminium alloy, anodised, sliding door bolts 300mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed

S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece complete all as specified and directed

S & F in repair GI steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm etc all as specified.

S&F PVC coated 25mm dia mild steel chromium plated curtain rod of medium weight and including fixing brackets, finals and decorative end supports etc complete all as directed”

Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for

M&L Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for formwork to chullah hoods,chajjas,troughs and similar items including edges with fair finished flat surface complete all as specified and directed

M&L for Reinforced cement concrete 1:2:4 type B-1(using 20mm graded agg) in chajjas complete all as specified and directed

M&L for Plates (plain or chequered) channels of type Fe-410W(Gde E-250) quality B, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc..

M&L for 19-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar.

M&L for Providing precast cement concrete solid building blocks 1:3:6 type C-1(using 20mm graded agg) or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete, in walls complete all as specified and directed

Hacking out old broken glass(any thickness, size quality or description)from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and directed

S&F sheet glass 3mm thick ordinary quality and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as specified and directed

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store

S&F for 15mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed

S&F for 20mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed

S & F PVC connection 15mm dia 450 mm long with brass check nuts and washers

S & F in repair 15mm dia CP bib tap, alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed.

S & F in repair 15mm dia CP pillar tap, fancy type , with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specifed.

S & F in repair CP 15mm dia stop cock cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified

S & F in repair 20mm bore gun metal globe or gate valve with iron wheel head, screwed down for iron pipe orcomplete all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Supply and fix for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed.

Supply and fix 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed.

Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement.

S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete as specified and directed

Dismantling of water tanks exc 250 ltrs & n. exc 500 ltrs capacity and removing to store.

S&F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S & F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified.

S & F in repair Wash basins, Vitreous China 400X400mm (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand with Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed ,Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests , including connecting to trap and to flushing pipe and complete.

S&F in repair PVC valveless, syphonic action type, flushing cistern,low level, white, with inlet, ball valve, float and handle including brackets complete.

M&L for Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms)

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for

M&L for Cement concrete Type C2 1:3:6 (40mm Graded Agg) in surface channels and drains complete all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.

M&L for Sunken Treatment of Toilet Bathroom(including Demolition as in following steps: i)Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick in CM 1:3 using approved water proofing compound @ 3% by weight of cement finished even & smooth using extra cement ,curved at the junctions. ii)Apply two coat of epoxy resin/polymer modified cementations coating like a brush bond of FOSROK/SIKA/Pedilite or equivalent, both on floor & beams. iii)Sunken slabs to be given 1:20 slope outword 25mm GI pipe spout with 300mm projection beyond outer surface of wall shall be provided. iv)Water tightness of sunken portion to be tested by ponding with water for 72 hours.In case of even a slight mark of seepage,the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. v)The sunken portion will be filled with lean concrete 1:4:8 type D-2 using brick agg to req depth. Note:No cutting in roof slab/beam shall be allowed for passing of CI pipes & fittings.The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE.

M&L for taking down of existing tarfelt and bituminous compounds in roof of any discription from roof or terracing,roughening surfaces of old concrete surface by picking u,sweeping clean and washing down with water to remove dust etc providing 15 mm thick screed bed or bedding layer of CM(1:4) for laying water proofing membrane and finishing surface even and smooth w/o using extra cement and providing water proofing treatment over smooth finished surface after applying hot bitumen 85/25 @ 1.2 kgs/Sqm providing laying APP polymer, modified,non-woven polyster mat,reinforced membrane,3mm thick(min)weighing 3.50 kg/Sqm with surface finish of white mineral,by torch application method,with minimum 75mm overlap on longitudinal direction and 100 mm overlap on the transverse direction and finally applying one coat of bituminus based solar reflective aluminium paint @ 100Gms/Sqm over PP modified membrane all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

M & L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete, cpmplete all specified and directed.

Dismantling plain or corrugated steel sheeting of any thickness as in roof coverings complete all as specified and directed.

Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.

Supply and Fix 0.80 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings ( length and girth as fixed) with grade of zinc coating 120 gsm complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Gde-Fe 410-W (Gde E- 250) quality A.complete as specified.

M & L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and using PCC type C-1, 1:3:6 (20mm graded agg) and setting in cement mortar 1:6 complete.

M & L 10 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

M & L for 15 mm thick plaster in cement mortar 1:4 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of chalk whitening primer.

Material and labour Preparing newly plastered wall surfaces and applying Two coats of cement base paint on wall surfaces over one coat of alkali resistance primer complete all as specified and directed

S&F for providing 4 mm thick "E" Board in ceiling with galvanised iron snap frame of 'T' section 24 x 38 x0.70 mm wall/ceiling angle 25 x 25 x 0.35mm thick and hanging with 4 mm GI wire all fixed arrangement will be done as per manufacturer instruction complete all as specified and directed.

Demolition of cement concrete (reinforced) in any description not exc 15cm thickness (below or aabove ground level)

M&L for re-inforced cement concrete 1:2:4 type B-1 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), rough finished flat surface complete all as specified and directed.

Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

All as per item No. 105 here in before One 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5sq. mm size

All as per item No. 105 here in before but for one 3 pin socket outlet 5 Amps three pin controlled by one switch on independent board complete all as specified directed.

All as per item No. 105 here in before but for one 5 pin socket outlet 15 Amp and 5 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified.

S&F Socket outlet 2 in 1, 3 pin, 5 amp flush type

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type

Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed.

Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm , two to three terminals complete all as specified & directed.

Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed.

S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as specified and directed.

Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers

Supply and fix sheet metal enclosures Double door for DBs when MCBs to be used 230 volts 8 way 32 Amp rated busbar single pole and neutral fixed on wall duly grouted in solid block wall or on wooden board.

S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 V complete all as specified and directed.

S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 V complete all as specified and directed.

S&F in replacement of 1100 Volts grade heavy duty ISI marked cable PVC insulated stranded aluminium conductor one twin core cable flat or circular of size 10 sqmm served with inner sheathing of PVC tape & overall PVC sheathed in service connections etc

Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc)

Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC.

M/S RAM AWADH SINGH (BID ID -3488082)

M/S R P M CONSTRUCTION (BID ID -3488172)

M/S N D ENTERPRISES (BID ID -3488199)

M/S SM ANSARI (BID ID -3488928)

M/S ASHOK CONSTRUCTION (BID ID -3488966)

M/S R N ENTERPRISES (BID ID -3489031)