RENOVATION OF BUTTERFLY HOUSE IN BUTTERFLY PARK

Dismantling of Existing MS Square Tube in Horizontal & Vertical direction due to corrosion

Removal and replacing of Existing SS Handrail along with Finishes

Brick work in CM 1:5 (one cement & five sand) using II class ground moulded bricks of size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.

Paving Hydraulic pressed cement Mosaic Tiles of approved colour and size 20cmx20cmx20mm finished thickness with small verona or Indian marble ( other than salem magnesite ) with cement mortar 1:3,20mm thick and pointed with the same colour cement including polishing with power polisher to a high degree of polish so as to be perfectly smooth and glossy

Refill & Grouting along with Finishes of Internal Kerb Wall

Dismantling of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Flooring with plain Tiles of approved quality and colour size 305x305x6mm thick laid in cement mortar 1:3 20mm thick and painting with white cement including furnishing the joint and painting flush with the surface complete

Removal of Existing Polycarbonate Sheet Roofing

Bamboo reepers for the seggregation of the space

Wooden planks to support as intermediate for the bamboo

Painting two coats with ready mixed paint of approved quality and colour over old iron works including scrapping and removing old paint from structural steel by manual labourers

Supplying of 6 mm thick solid Polycarbonate sheet as per given technical specifications.

Fixing of 6 mm thick solid Polycarbonate sheet using nessesary MS support structure from the ground. as per given technical specifications. The sheet will be mounted on hot dip galvanized steel frame work with the help of specially designed aluminum pressure pad profile and zinc coated pinhead self-drilling screw with rubber gasket for proper griping & to prevent noise leakage

Removing paint from doors, windows & wood works by manual labour

Painting two coats with plastic Emulsion paint by (ACE) of approved quality and colour over a priming coat including clean removal of dirt, plaster of pairs, putty etc wherever required (SI 358).

Providing and Applying high perfomance solar reflective & Acrylate silicon based Waterproofing coating which is single component, cold applied, water based acrylic and UV resistant water proofing treatment to the Existing Roof screed surface applied @ 1.5 l/m2 in 3coats to achieve 1mm DFT, having tensile strength 2N/ mm2 confirming to ASTM D 412; Elongation at break ≥ 200%,Abrasion resistance 21mg confirming to ASTM D4060 and Crack bridging ability up to 2 mm, including surface preparation, priming the surface with 1 coat diluted with water in the ratio 2:1 spreading @ 0.125 L/m2 as self-priming coat in the SSD condition and spreading 45 gsm glass fibre mesh of 2.5 mm x 2.5 mm sandwiched between the first and second coat completely as per specification. The finished cost to include surface preparation, making coving at Junction, treatment of cracks completely as per specification.

Sloar Powe Plant: On Grid Solar PV Plant comprising of: i) Solar panels of type Mono Crystline, PERC, etc. ii) Power Conditioning Unit (PCU)with MPPT, Inverter, Controls, Protection Devices, Interconnecting D.C. cables, Connectors, Junction Boxes and accessories. iii) D.C. D.B iv) A.C. D.B v) A.C. cables and accessories vi) Lightning arrestor, earthing, etc. vii) Module Metallic Mounting Structures viii) Installation, Testing and Commissioning corresponds to BIS and IEC requirements

Supply and Installation of Air Conditioner with copper coil -2.0 TR Split Type AC Unit - 3 Star Rated

Shelving system in WPC

Supply and fixing of Anti Skid Rubber/PVC Padding for the existing SS Ramps

Repair works for the Existing Teak Door along with Frame at site D1-2400x1200 , D2-2400X950

Removal works for R.O Plant for Mist foggers & Other Necessary Pipeline equipments

Supply & Erection of SS mesh in the External Mesh Wall - Around the perimeter

Supply & Erection of SS mesh in the External Mesh Wall - Around the perimeter

Selfie Point - ACP Cladding or CNC Designed Steel Sheets

Electrical Work

Supply and Run of 4 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Supply and Run of 4 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Junction boxes : weatherproof junction boxes

Sockets for AC wiring

Aeration Pumping system

Floating aeration fountain unit

Submersible motor, spray nozzle head

electrical work

Custom fabricated decorative pipe structure for interpretation center:

Carpentry work as per design for interpretation center

Butterfly cut out zone with lighting for interpretation center

Artistic Painting work

Please Enable Macros to View BoQ information