PROVIDING C.C ROAD RENEWAL OF B.T ROAD ANSARI NAGAR 1ST CROSS LANE115061L00768,ANSARI NAGAR 2ND STREET LANE 115061L00769,ANSARI NAGAR 3RD CROSS LANE 115061L00771,ANSARI NAGAR 3RD CROSS LANE 115061L00772,B5 B5 BUS ROUTE

Dismandling the Existing Damagaed Concrete Road etc,complete.

Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc, complete as per standard specification

Advance Patch work 13.20mm Providing Advancve Patch work using 50mm consolidated Thickness by using 1 m3 of 13.20mm IRC Metal with 44kg of Bittumen per 1 m3 of Metal For Pre Mixing For existing surface advance Patch work including cost and conveyance of materials to the work site and stacking them to the departmental metric guage for the premeasurement, heating the bitumen in bitumen boiler, heating the aggregates and mixing them with bitumen in mini hot mix plant for premix carpet only rolling by 60-70KN power roller for premix carpet and seal coat seperately including labour charges for spreading the mix for premix carpet application of bitumen for seal coat over premix carpet, including labour charges for spreading seal coat seperately over premix carpet etc. including higher charges and fuel charges for , bitumen boiler and all other tools and plant employed etc. complete as per of MoRTH Rev - V Specifications

Providing and laying tack coat of 2 kgs/10 sqm over the B.T. surface treated with binder using 2 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications.

Providing and laying Bituminous concretete 30mm/40mm thick using 0.13 cum of 19.00-9.50mm grade dmetaland 0.17cum of 9.50-2.36mm grade dmetaland 0.26 cum of 2.36mm & below metal with 45.27kgs of 60/70 bitumen & 5.03Kg of Plastic waste (Total-50 . 30 kg) and for premixing per 10 sqm including cost and conveyance of all materials to CMP site, heating the bitumen and agregates to require dtemperature and mixing the min required temperature in central hot mix plant 20-30 tonnes capacity conveying themix by tipper trucks top a versite, spreading the mixin required temperature for uniform thickness of 40mm /30mm with mechanical paver to the specified grades and crosssections and compaction by Vibratory roller to the required density etc., including labour charges for loading bitumen into bitumen tank and metal to fee derunit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30t CMP with bitumen boiler, tipper trucks, paver finisher, Vibratory roller sand all ot her too lsand plants required, including all ot herincidental charges etc., complete using CMP clause 507 of MORTH Rev - 5

Supply of FRC Manhole 600mm size dia cover with frame including cost of conveyance loading fixing the same etc complete

Raising the existing circular man hole in heavy type including the removing the existing the man hole cover with frame and dismantling the existing the cement concrete wall and tar road surface around the manholes using 1:2:4 20mm jelly for raising the existing the manhole wall and using CC 1:2:4 with 20mm chips for finishing the top surface of manhole etc., complete

Providing and laying of hot applied thermoplastic compound 205mm thick including reflect rising glass beads @ 250gms.per sqm.area.thickness of 2.5mm is exclusive of surface applied glass beads as per IRC :35. The finished surface to be level uniform and free from streadks sdand holes etc complete.(as per MORT & H Specification no803)

Sub Total

Please Enable Macros to View BoQ information