PROVN OF DEFICIENT MD ACCN 01 NO TYPE V QTRS ON EXISTING TERRACE OF P48 AND 02 NOS OF TYPE IV ON EXISTING TERRACE OF P23 AT CGRA COMPLEX PARADIP UNDER GE I CG BHUBANESWAR

Amount

SCH 'A' PART-I : BUILDING PORTION Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in lintel Beams,Roof beams,Floor beams cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-35.00 Cum+ Sch 'A' Part-IV-2.10 Cum=Total Qty =37.10 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts etc, etc complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-20.00 Cum+ Sch 'A' Part-IV-3.00 Cum=Total Qty =23.00 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs ,Loft slab,Kitchen slab and in shelves and the like etc complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-65.00 Cum+ Sch 'A' Part-IV-2.50 Cum=Total Qty =67.50 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Fins, fascias, louvres, parapets drop, Arch bacony, and railings exc. 60cm in height, newels, balustrade, and the likecomplete all as specified.etc fair finished complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-18.00 Cum+ Sch 'A' Part-IV-0.50 Cum=Total Qty =18.50 Cum)

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Chajjas complete all as specified.etc fair finished complete all as specified and directed.

Material and labour Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in stairways including steps (square or spandril), string pieces, etc., complete, any section straight or winding, but excluding landings; RCC water tanks upto 1500 litres complete all as specified.etc fair finished complete all as specified and directed.

M&L form work to sides of pillers, posts, struts, piers,columns and stanchions,square, rectangular,with rough finished surface complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-250.00 Sqm+ Sch 'A' Part-IV-30 Sqm=Total Qty =280.00 Sqm)

M & L form work to sides of lintel beam,roof beam,floor beam and soffit of roof beams, with rough finished flat surface complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-300.00 Sqm+ Sch 'A' Part-IV-16.00 Sqm=Total Qty =316.00 Sqm)

M & F form work to soffits of suspended slabs, floor slabs,roof slab and similar work; not exceeding 200 mm thick(Horizontal or sloping) with with rough finished & flat surface of concrete complete all as specified and directed.(Note : Qty of Sch 'A' Part-I-460.00 Sqm+ Sch 'A' Part-IV-25.00 Sqm=Total Qty =485.00 Sqm)

M & L formwork to fins, louvers, fascia ,parapet drop with rough finished surface complete all as specified and directed. (Note : Qty of Sch 'A' Part-I-380.00 Sqm+ Sch 'A' Part-IV-14.00 Sqm=Total Qty =394.00 Sqm)

M & L form work to chullah hoods, chajjas,troughs and similar items including edges, with fair finished flat surface complete all as specified and directed.

M & L formwork to staircase with rough finished surface complete all as specified and directed.

Material and labour for high strength corrosion resistant TMT (CRS FE500D)bars 10mm dia and over cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete, all as specified and as directed. Make- SAIL/TISCO/RINL/M/s Shyam Steel Indeustries Ltd/M/s SPS Steel Rolling Mills Ltd/M/s Jai Balaji Industries Ltd. (Note : Qty of Sch 'A' Part-I-12000.00 Kg+ Sch 'A' Part-IV-650.00 Kg=Total Qty =12650.00 Kg)

Material and labour for high strength corrosion resistant TMT bars (CRS FE500D))6 to 8mm dia and below cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete, all as specified and as directed. Make- SAIL/TISCO/RINL/M/s Shyam Steel Indeustries Ltd/M/s SPS Steel Rolling Mills Ltd/M/s Jai Balaji Industries Ltd. (Note : Qty of Sch 'A' Part-I-800.00 Kg+ Sch 'A' Part-IV-10.00 Kg=Total Qty =810.00 Kg)

Material and labour high strength corrosion resistant TMT bars(CRS FE500D), 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including complete, all as specified and as directed. Make- SAIL/TISCO/RINL/M/s Shyam Steel Indeustries Ltd/M/s SPS Steel Rolling Mills Ltd/M/s Jai Balaji Industries Ltd. (Note : Qty of Sch 'A' Part-I-1500.00 Kg+ Sch 'A' Part-IV-220.00 Kg=Total Qty =1720.00 Kg)

Material and labour for brickwork with modular flyash bricks , straight or curved on plan exc 6m mean radius, built in CM 1:6 complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-185.00 Cum+ Sch 'A' Part-III-1.00 Cum + Sch 'A' Part-IV-10.50 Cum+Sch 'A' Part-V-0.25 Cum =Total Qty =196.75Cum)

Material and labour brickwork with modular fly ash bricks ,straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete, all as specified and as directed.

Material and labour 25mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in floor and finishing cement concrete surface even and smooth without using extra cement complete all as specified

Material and labour Vitrified Ceramic tiles 10 mm thick dark shade double charged (square/ rectangular) polished, area of each tilesnot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

Material and labour Vitrified Ceramic tiles 10 mm thick dark shade double charged (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar (1:4) complete in skirting all as specified and as directed.

Material and labour Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over 15mm thick rendering in cement mortar (1:6) complete, all as specified and as directed.

Material and labour glazed ceramic coloured tiles of size (300x450mmx7mm) thick on vertical surfcaes such as skirtings,dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick rendering in cement mortar(1:4) complete, all as specified and as directed.

Material & labour for Granite (of any type) stone 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and match the shade of granite stone including 15 mm thick rendering in CM(1:6) complete all as specified and as directed.

Material and labour 20mm thick Granite (of any type) stone machine cut, in skirting, dado, riser, cooking platform etc laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10mm thick rendering in cement mortar(1:4) complete all as specified and as directed.

Material and labour marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms, flooring and landings of stair case, risers, treads and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of Makrana white over and including 10mm thick rendering in cement mortar(1:4) complete, all as specified and as directed.

Material and labour Chamfer, splays or arris in facework of Granite/ marble n. exc 15mm wide complete all as specified and as directed.

M & L for rendering 10mm thick cement plaster in cm (1:6) on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and as directed. (Note : Qty of Sch 'A' Part-I-1080.00 Sqm+ Sch 'A' Part-IV-43.00 Sqm=Total Qty =1123.00 Sqm)

M & L for rendering 15mm thick two coat of in cm (1:4) on fair faces brick or concrete surfaces using Liquid water proofing compound (3% of weight of cement on top coat I.e 5 mm of plaster )of wall including finished even and smooth without using extra cement complete all as specified and as directed.(Note: extra qty taken for plastering of brick work).(WPC Shall be paid and meassured separately) (Note : Qty of Sch 'A' Part-I-745.00 Sqm+ Sch 'A' Part-IV-50.00 Sqm=Total Qty =795.00 Sqm)

Supply only Liquid water proofing compound(Make:Pidillite/Fosroc)

M & L for rendering 5mm thick cement plaster in CM (1:3) on ceiling including finished even and smooth without using extra cement complete all as specified and as directed. (Note : Qty of Sch 'A' Part-I-330.00 Sqm+ Sch 'A' Part-IV-20.00 Sqm=Total Qty =350.00 Sqm)

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed. (Note : Qty of Sch 'A' Part-I-371.00 Sqm+ Sch 'A' Part-IV-43.00 Sqm=Total Qty =414.00 Sqm)

M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.(Note : Qty of Sch 'A' Part-I-330.00 Sqm+ Sch 'A' Part-IV-20.00 Sqm=Total Qty =350.00 Sqm)

Material and labour preparation of newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of chalk whitening priming paint & smooth surface over a coat of primer paint over a coat of 1mm thick plaster of paris wall care putty over new surfaces complete , all as specified and as directed.

Material & Labour for preparation of new surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of 1mm thick exterior wall putty over new surfaces complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-745.00 Sqm+ Sch 'A' Part-IV-50.00 Sqm=Total Qty =795.00 Sqm)

Material and labour preparation of new wooden surfaces of any description exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete, all as specified and as directed.

M&L for preparation of new or previously untreated surface of steel or steel based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified. (Note : Qty of Sch 'A' Part-I-70.00 Sqm+ Sch 'A' Part-IV-18.00 Sqm=Total Qty =88.00 Sqm)

Supply and fixing powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. (minimum thickness of powder coating 50 micron complete all as specified complete all as specified and directed. (Note- Glass shall be measured and paid separately)

Supply and fixing powder coated anodised aluminium window and ventilator shutters, fixed, openable/ sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete, all as specified and as directed. (Note- Glass shall be measured and paid separately)

Supply and fixing aluminum anodized grill DG 202 powder coated of 10 mm dia rod square , rectangular, circular or similar type of shape, aperture not exc 5 cm in length or width fixed with `H’ or `F’ channel 38 mm x 12 mm x 1.30 mm (Sec No 8778) Make Grill No 20 of DECOREL or equivalent complete, all as specified and as directed.

Supply and fixing 5 mm thick Sheet glass, ordinary quality and glazing with oil putty/beads in square exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified as directed.

Supply and fixing 5 mm thick Sheet glass, ordinary quality and glazing with oil putty/beads in square not exc 0.5 sq. m in eachpane fixed to aluminum framing complete all as specified as directed.

Supply and fixing Figured glass 5mm thick, , pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete, all as specified and as directed.

Supply and fixing Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified and as directed.

Supply and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour sheet reinforced with M.S square tube supplying & fixing in opening as per specification & drawing complete, all as specified and as directed.

Supply and fixing of factory made solid panel PVC door shutter 30 mm thick(style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width struck inside with solvent cement for styles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted in the styles &rails with suitable PVC sheet beading and joined together with solvent cement.fixed in the frame at site complete, all as specified and as directed.

Plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied complete, all as specified and as directed.

Supply and fixing of 40 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete, all as specified and as directed.

Supply and fixing of 35 mm thick Skeleton 2nd class hardwood,open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and itred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I complete, all as specified and as directed.

Supply and fixing stainless steel Butt hinges 100mm size fixed to PVC framescomplete, all as specified and as directed.

Supply and fixing butt hinges 125mm size medium weight, cold rolled mild steel, and fixedfixed to wooden frames complete, all as specified and as directed.

Supply and fixing 150mm size aluminum handles, cast type anodised complete, all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 150 mm long complete, all as specified and as directed.

Supply and fixing Aluminum anodized barrel tower bolt of extruded section 200mm long complete, all as specified and as directed.

Supply and fixing aluminum alloy, anodized, sliding door bolt of length 300mm with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy.

Supply and fixing double action spring hinge from door shutter and supply and fixing of new MS double action spring hinge,125mm size with steel wire spring ,stove enamelled black fixed to metal door frame by welding complete, all as specified and as directed.

Supply and fixing door closer hydraulically regulated designation No 3 universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg complete, all as specified and as directed.

Supply and fixing 2nd class hardwood(Hollock) small fittings such as brackets of any type,latch and window stops & the like including all necessary labour,articles not exceeding 200 Cu cm each including 50mm long butt hinges,medium weight,cold rolled complete as specified and as directed.

Supply and fixing Aluminium power coated fancy type aluminium curtain rod 25mm dia incl PVC rungs @100mm C/C wutg globe type brackets matching to curtain rod complete, all as specified and as directed. MARVEL brand (legend series) manufactured by M/S Accumax interior products Pvt Ltd mumbai or equivalent as approved all as specified and as directed.

S & F for 2nd class hardwood plain fillets square, rectangular or triangular in section, clean sawn, secured with nails or brads Exc 6 & n exc 13 sq.cm complete, all as specified and as directed.

Supply and fixing 20 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete, all as specified and as directed.

Supply and fixing 20 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws to timber frame workcomplete, all as specified and as directed.

S & F Continuous (piano) hinges,of 30mm flap mild steel, bright finish or electro galvanised complete, all as specified and as directed.

Supply and fixing Hasp and staple, 75mm size safety type, aluminium with mild steel hinge pin including bolt to hinge plate and fixed with screws complete, all as specified and as directed.

Supply and fixing Floor door stopper 150mm long of brass body and with hard drawn steel spring and tongue, fixed in floor complete all as specified as directed

Cutting holes in brick walls built in cement mortar for inserting hold fasts & making good dismantled portion in CM 1:3 or cement concrete (1:2:4) type B-1, depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick complete all as specified and as directed. (Note : Qty of Sch 'A' Part-I-90.00 Sqm+ Sch 'A' Part-IV-6.00 Sqm=Total Qty =96.00 Each)

Material and labour MS flat iron small articles such as clamp, hold fast including bolts if required etc conforming to Fe.290. Gde-E-165 complete, all as specified and as directed.

S&F of brass 4 Levers Mortice lock, vertical type, size 100mm all as specified and as directed all as specified and as directed.

Material and labour 40mm thick providing cement concrete of type B-1, 1:2:4 (20mm graded aggregate) with water proofing compound @3% by weight of cement even and smooth without using extra cement complete, all as specified and as directed. (Note : Qty of Sch 'A' Part-I-316.00 Sqm+ Sch 'A' Part-IV-24.00 Sqm=Total Qty =340.00 Sqm)

Material and labour providing 10mm thick cement plaster in CM( 1:4 )with water proofing compound 3% by weight of cement complete , all as specified and as directed. (Note :water proofing compound cost will be measured separately) (Note : Qty of Sch 'A' Part-I-316.00 Sqm+ Sch 'A' Part-IV-24.00 Sqm=Total Qty =340.00 Sqm)

Applying a coat of hot blown grade bitumen 85/25 @ 1.20 Kg / Sqm over plastered surface of roof slab after thoroughly cleaning and removing all loose particle, dust / dirt particles etc (Note :water proofing compound cost will be measured separately) (Note : Qty of Sch 'A' Part-I-400.00 Sqm+ Sch 'A' Part-IV-30.00 Sqm=Total Qty =430.00 Sqm)

Supply &laying 3mm thick APP based polymeric membrane weighing not less than 3.00 Kg/Sqm reinforced with polyester non woven fabric (weighing not less than150 Gms/Sqm) with minimum 100mm transverse lap 75mm longitudinal lap over RCC slab. Application of polymeric membarane shall be by torching etc as per manufacturers's instruction and complete all as directed. (Note : Qty of Sch 'A' Part-I-400.00 Sqm+ Sch 'A' Part-IV-30.00 Sqm=Total Qty =430.00 Sqm)

Material and labour hydraulically pressed burnt clay tile plain of size (200×200×19/20)mm machine made laid over and including 15mm thick screed plaster in cement mortar(1:4) complete and compound and jointed pointed in CM (1:3 )mixed with 5% crude oil by weight of cement complete, all as specified and as directed.

Material and labour Providing, cement concrete Type B0 1:2:4 (12.5mm graded graded graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting he same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete, all as specified and as directed.

Supply and fixing 3-layer PP-R Polypropylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors etc of size:-

(a) 32 mm bore

(b) 25 mm bore

(c) 20 mm bore

Cutting chases in brick wall,girth not exceeding 10 cm for concealing water tubing and making good in cement mortar (1:3).

Supply and fixing PP-R Gate valves 32mm bore (brass insert) as per requirement of the site complete, all as specified and as directed.

Supply and fixing Stop valves 20mm bore, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete, all as specified and as directed.

Supply and fixing wall mixer and provision for overhead shower with 115mm Long Bend Pipe on upper side, connecting legs & wall flanges complete, all as specified and as directed. .Make : Jaquar (FUS-29273UPR) or equilavent as approved.

Supply and fixing, bib taps,cast copper alloy,,chromium plated,fancy type with crutch or butterfly handle screwed down,screwed for iron pipe or for brass ferrule and fixed ,concealed of size 15 mm bore complete, all as specified and as directed.

Supply and fixing PVC connections 15mm size with PTMT nuts of length 450mm complete, all as specified and as directed.

Supply and fixing 15mm bore Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete, all as specified and as directed.

Supply and fixing Rimless Single Piece WC with UF soft close slim seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern Fittings, Size: 385x720x715 mm, complete all as specified and directed. Make : Jaquar (ONS-WHT-10853S300UFSM)

S & F Vitreous china wash down water closet pan (pedestal pattern white) with integral foot rest with P or S trap excluding flushing cistern and flush pipe complete all as specified and as directed.(Make: Parryware)

S & F PVC valveless, syphonic action type flushing cistern 9 to 10 ltr capacity low level white with inlet ballvalve float and handle including brackets complete all as specified and as directed.(Make:Prayag)

Supply and fixing Hand shower health faucet with wall 8mm dia, 1.2 mtr long flexible tube & wall hook for EWC including hinges with complete fitting. Make : Jaquar (ALD-573) or equivalent as approved.

Supply and fixing 15mm bore fancy type chromium plated, bib taps, cast copper alloy, with 2 Way bib taps with wall flange ,screwed for iron pipe or for brass ferrule and fixed complete, all as specified and as directed. Make : Jaquar Alive 2 Way (VGP-81041) or equilavent as approved

Supply and fixing shower rose of continental series, Make : Jaquar ( CAT No. OHS – 1709 with sower arm CAT No. SHA-477) or equivalent as approved

Supply and fixing 32mm PVC waste pipe for wash hand basin., 900mm long complete, all as specified and as directed.

Supply and fixing under counter square type wash hand basin of size 425x425x145 mm complete, all as specified and as directed. Make : Jaquar (ONS-WHT-10901) or equilavent as approved

S & F vitreous China wash basin , white, flat back, size (550 x 400)mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or erecting stand etc. all as specified and directed.(Make:Parryware)

Supply and fixing CP brass liquid soap dispenser with glass bottle fixed with CP brass screws complete, all as specified and as directed. Make : Jaquar (AKP-35735P) or equilavent as approved

Supply and fixing CP brass toilet paper roller with flap fixed with CP brass screws ccomplete, all as specified and as directed. Make : Jaquar (AQN-7753) or equilavent as approved

Supply and fixing 15mm bore Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses,with or without lettered'Hot' or 'Cold' ,screwed for 15mm iron pipe and fixed complete, all as specified and as directed. Make : Jaquar (COP-167BPM) or equilavent as approved

Supply and fixing Brass square towel ring with and including CP brass screw complete, all as specified and as directed. Make: Jaquar (AKP-35721P) or equilavent as approved

Supply and fixing Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel complete, all as specified and as directed. .Make: Jaquar (ACN-1181FHS) or equilavent as approved.

Supply and fixing Corner Glass Shelf with Bracket complete, all as specified and as directed. .Make: Jaquar (ACN-1173) or equilavent as approved

Supply and fixing Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete, all as specified and as directed. .Make: Jaquar (ALD-769L) or equilavent as approved

S & F PVC Cabinet mirror of size (54 x 34 x 12.7) cm with cabinet and mirror all as specified and as directed.(Prayag)

Supply and fixing 32mm dia CPVC Pipes & fittings on walls/ ceiling or laying in floors complete, all as specified and as directed.

Supply and fixing 75 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete, all as specified and as directed.

Supply and fixing 100 mm PVC (SWR) floor trap plain with grating including jonting with solvent cement complete, all as specified and as directed.

Supply and fixing 75 mm CI Nahani trap with PTMT gratings(minimum weight 250 gm) including jointing to waste pipe fixed in cement concrete(1:2:4) type B1 complete, all as specified and as directed.

Supply and fixing 1000 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part I complete, all as specified and as directed.

M & L for Rotational moulded polythylene water storage tanks 500 litre capacity (cyclindrical vertical with closed tops) hoisted and fixed in position all as specified in SSR part -I complete all as specified and as directed..

Supply and fixing 25 mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete, all as specified and as directed. (Make :Prayag)

S & F in repairs 75 mm bore PVC (SWR ) pipe single socketed in any length with rubbering joints fixed to walls including all fittings complete all as specified and as directed.(Make:Supreme/Oriplast)

S & F in repairs 110mm bore PVC (SWR ) pipe single socketed in any length with rubbering joints fixed to walls including all fittings complete all as specified and as directed.(Make:Supreme/Oriplast)

S & F PVC (SWR) bend 110mm bore any radius including door system complete all as specified and as directed.

S & F PVC (SWR) bend 75 mm bore any radius without door system complete all as specified and as directed.

PVC (SWR) vent cowl of bore 75 mm complete all as specified and as directed.

PVC (SWR) vent cowl of bore 110 mm complete all as specified and as directed.

S & F PVC (SWR) 110mm bore bends any radius all as specified and as directed

S & F shoes suitable for 110 dia PVC (SWR) pipe complete all as specified and as directed.

S & F PVC (SWR) junction single 110 mm dia with access door (single T) equal or unequal all as specified and as directed.

S & F branch pieces 110 mm dia with access door single (single Y) equal or unequal all as specified and as directed.

S & F PVC (SWR) 75 mm bore bends with acess door all as specified and as directed.

S & F PVC (SWR) junction single 75 mm dia with access door (single T) equal or unequal all as specified and as directed.

M&L for providing and fixing stainless steel ladder (grade 304) made of hollow tubes, channels, plates etc, including welding, grinding, butting, polishing and making curvature (wherever required0 and fitting the same with necessary stainless steel nuts and olts complete including fixing the railing with necessary accessories and stainless steel dash fasterners, stainless steel bolts etc of rquired size on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

SCH 'A' PART-II :DEMOLITION/DISMANTLING Demolition of RCC roofs, floors (other tan ground floors), beams, stair case, landing, chajjas ,Column and similar suspended works etc all as specified.

Demolition of brick and stone wall built in cement mortor all as specified.

Dismantling brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for all as specified.

Dismantling plain or corrugated steel sheeting any gauge/thickness including Nainital or similar pattern roof covering.

Taking up/down steel tubing 25-32mm dia of pipe and connections including cleaning for refixing or removal to store

Taking up/down steel tubing 40-50 mm dia of pipe and connections including cleaning for refixing or removal to store

Dismantling of Water tanks, open or closed, hoisted and re fixed in any position including cleaning/ removing any scale and dirt of capacity exc 500 lit but not exc 1000 lit.

Dismantling wrought iron and mild steel work of any descreption not other wise provided for

SCH 'A' PART-III :SEWAGE DISPOSAL Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth getting out in soft/loose soil all as specified and directed. (Note : Qty of Sch 'A' Part-III-11.00 Cum+ Sch 'A' Part-V-60.00 Cum + Sch 'a' Part-VI-16.20 Cum+Sch 'a' Part-VII-18.00 Cum =Total Qty =105.20 Cum)

M & L rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and fair all as specified

M & L for PCC type C-2 in 1:3:6 as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in in for 150 mm dia (internal dia) SWG pipes complete all as specified and as directed by Engr-in-Charge.

M & L 150 mm dia (Internal dia) salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete all and as directed.

M & L for PCC ( 1:2:4 )type C1 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, benching of man holes etc complete all as specified and as directed.

M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in precast cement concrete (reinforced) man holes cover slabs and set in cement mortar (1:6) complete all as specified and as directed.

M & L for 10 mm and above dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr in charge.

M & L for cement concrete in (1:4:8) type D2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete as in man holes all as specified and as directed.(Note : Qty of Sch 'A' Part-IV-0.20 Cum+ Sch 'A' Part-V-2.00 Cum=Total Qty =2.20 Sqm)

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and as directed. (Note : Qty of Sch 'A' Part-III-4.00 Cum+ Sch 'A' Part-V-48.00 Cum + Sch 'A' Part-VI-8.8 Cum + Sch 'A' Part-VII-16.16 Cum=Total Qty =76.96 Cumm)

Removing excavated/surplus material exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed. (Note : Qty of Sch 'A' Part-III-7.00 Cum+ Sch 'A' Part-VI-7.40 Cum+Sch 'A' Part-VII-1.84 Cum=Total Qty =16.24 Cum)

Cutting into existing manholes for 150 mm dia of pipes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required all as specified and as directed.

SCH 'A' PART-IV : GARAGE M & L Hardcore of guage exc 63mm but n exc. 100 mm, deposited,spread and levelled in layers n exc. 15 cm thick, watered and rolled /rammed to a true surface all as specified and as directed.

M&L Sand filling under floors or in foundations including watering and consolidation all as specified and as directed.

Material and labour 40mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded aggregate) as in floor and finishing cement concrete surface even and smooth without using extra cement complete all as specified

Material and labour 100mm thick plain cement concrete type D-2(1:4:8) (using 20 mm graded aggregate) as in floor and finishing cement concrete surface even and smooth without using extra cement complete all as specified

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete, all as specified and as directed.

Material and labour preparation of roof surface and applying two coats of aluminium paint complete, all as specified and as directed.

Supply only integral Water Proofing compound complete, all as specified and as directed.

SCH 'A' PART-V :FOUNDATION INCLUDING EARTH WORK Excavation in trenches n.exc 1.5m wide and exc 1.5m deep for foundation ,etc and getting out in hard/soft/dense soil complete all as specified and as directed.

Hand packing broken stone or boulders (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and as directed.

Removing of excavated material 500m but not exec 1500 m and depositing where directed.

M&L for Controlled concrete of grade M-30 design mix (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified.etc fair finished complete all as specified

M&L for high strength corrosion resistant (Grade Fe-500D) TMT bars 10mm dia and over cut to length bent to shape required including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

All as per item No-155.00 hereinbefore but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

Use and waste of form work to sides of concrete foundations , footing rafts, pile caps etc fair finished surfaces complete all as specified

SCH 'A' PART-VI : (EXTERNAL ELECTRIFICATION) Supply and laying Sand coarse dry as in cushioning of under ground electric cable in trenches, laid to a uniform thickness of 23 cm (15 cm under the cable & 8 cm over the cable) and gently punned down to 18 cm thickness all complete as specified and as directed.

S&L well burnt sub class ‘B’ bricks (using old size brick) laid in trenches above sand cushioning for cable protection complete.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to galvanised iron strip 25×4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 40 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

M & L for cutting the existing concrete/bituminious road surface width n.exe 30 cm and making good the surface with 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate finished even and fair complete over 100mm thick PCC 1:4:8 type D2 using 40mm stone sggregate over consolidated/rammed earth surface all as specified and directed

M&L GI pipe light grade with all fitting laid in trenches and under road/floor/culverts along with pole etc 50mm bore. Make : Tata/Jindal/Surya

Supply and Fix MCCB 415 Volt 16 KA 4 Pole, 100 Amps in existing panel as outgoing complete all as specified and directed.

Supply, installation, testing and commissioning factory made LT feeder pillar box Outdoor type platform mounted of size 1000X800X450mm suitable for 415 Volts 3 phase 4 wire system 50 Hz supply having 04 Nos aluminum bus bar 150 Amps for phases and neutral, installed on porcelain / epoxy insulator. The panel shall be dust proof, vermin proof (IP54) and applying spray painting with two coats of syntheitc enameled paint over a coat of red oxide primer on sheet and made out of 3.15 mm thick CRCA sheet self moulded type and 50x50x6 mm angle iron frame front and rear opening with double shutter and locking arrangement with 50 mm lock and including grouting of panel with necessary PCC 1:2:4 type B-1 work complete all as specified. The scope of work includes provision of housing the following accessories

Outgoing ways :- (i) MCCB 4 pole, 100`Amp 25 KA with adjustable magnetic release @ 01No For out going (ii) MCCB 4 pole, 63 Amp 25 KA with adjustable magnetic release @ (01 Nos Stand by)

Taking Down Old Unserviceable LT Feeder Panel of any Sizes including MCCB.

Taking Down Old Unserviceable LT cable of any Sizes

SCH 'A' PART-VII : (EXTERNAL WATER SUPPLY) Supply and laying of GI pipe medium grade with fittings laid in trench of the 25 mm bore of pipe complete all as specified and directed.

Supply and Fix Gun-metal, gate valves, of size 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixed

M & L drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 25 mm complete all as specified and directed

SCH 'A' PART-VIII : HOT WATER SUPPLY Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed.

S&F Modular Metal Flush Box 3 module complete all as specified and as directed.

Supply, installation, commissioning and testing of 25 Litres capacity water heating system, storage type (GEYSER) ISI maked, electrical single phase, 230 volts, 50 Hz, BEE 5 star energy saving rated having stainless steel tank, metallic body and including making electric connection and grouting of bolts Pipe connections etc. as required at site complete all as specified and directed. Make: Havells Cat Part No GHWAICTWH025/Usha/ Racold

SCH 'A' PART-IX : INTERNAL ELECTRIFICATION Material and Labour for point wiring complete with multi-stranded copper conductor 1.5 sqmm size PVC insulated unsheathed cable 1100 Volt grade, conforming IS 694 & colour code in conduit system of wiring, drawn in including medium grade PVC conduit not less than 20 mm dia concealed, including cutting chases and making good disturbed surface complete, including single core solid conductor copper 1.5 sqmm size solid PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified.

(a) One light point & Fan point controlled by one way switch.

(b) One 3 pin socket outlet, 5/6 amps, on independent board.

All as per item No. 180 above but for call bell point.

All as per here and before item No-180 above but for one light point controlled by one two way switch

All as per item No 181 (a) here-in-before but with copper conductor 2.5 sqmm for One 3 pin socket outlet, 15 amps on independent board all as specified and directed.

S&F Modular switch 1 way 6A, 1 module complete all as specified and as directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and as directed.

Supply and fix ceiling rose, surface bakelite,65 x 50mm, three terminals all as specified and directed.

S&F Modular White Cover Plate with Frame, 2 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 3 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 4 Module complete all as specified and as directed.

S&F Modular White Cover Plate with Frame, 6 Module complete all as specified and as directed.

S&F Modular Metal Flush Box 2 module complete all as specified and as directed.

S&F Modular Metal Flush Box 3 module complete all as specified and as directed.

S&F Modular Metal Flush Box 4 module complete all as specified and as directed.

S&F Modular Metal Flush Box 6 module complete all as specified and as directed.

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 6 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 6 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 4 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Philips Cat Part No BN021LED40S-6500PSU GR (4 ft) Eqv Crompton/ Havells

Supply & fix LED tube light Fitting SmartBright extruded aluminium batten available in 2 ft run length with multiple lumen packages and suitable for surface, wall & conduit mounting with accessories complete all as specified and directed. Make Philips Cat Part No BN021C LED22S PSU CW GR Eqv Crompton/ Havells

S&F flush mounting factory made Ekinoxe SPN DBs Double door IP-43 protection, IK-09 with Metal door with neutral bar,Earth Bar and cables ties for cable menagement fully insulated bus bar 12 way, all as specified and directed cat No 607711 make -Legrand or Equivallent Make of Siemens/Schneider.

Supply and fix MCB single pole and neutral, 240 volts, 32 to 40 amps breaking capacity 10KA, ‘C’ Series. etc , complete all as specified and directed. Make : Legrand /Siemens/Schneider

Supply and fix MCB single pole 240 volts, 6 to 32 amps, 50HZ, 10 KA. , ‘C’ series all as specified and directed. Make : Legrand or eqvt in Siemens/Scheinder

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 Mtr deep below normal ground level) with top edge of plate not less than 1.5 Mtr below normal ground level connected to earth lead wire of GI wire 4mm dia by means of nuts/bolts and washers, check nuts and washer of galvanized iron or steel including 15 mm dia GI pipe light grade upto 1.5 mtr below ground level for protection pipe ,excavation and earth work charcole dust, common salt PCC 1:3:6 type C-I using 20 mm stone aggregate for chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type BI using 20 mm graded stone aggregate reinforced with 8 mm dia TMT bars @ 75 mm c/c both ways with MS handle 12 mm dia, round ,PGI funnel and wire mesh, 20 mm dia GI pipe light grade for watering all as shown in Plate no 3 of SSR Part I of 2009 and connected to earth test point incl testing complete all as specified and directed . Note :- Cost of earthing strip & GI pipe 25mm up to 7.5 m shall be included in cost of above item.

Supply and fix heavy duty exhaust fan of 300 MM sweep,Turbo Force SP (Heavy duty ) single phase 230/240 Volts,, AC supply, 1400 RPM complete and making holes with louvered shutters including mounting frame and connecting the fan to celing rose including provision of three core flexible copper conductor cable of size 1.5 Sqmm copper including to inside out surface & white wash etc with not less than 0.5m long to connection complete all as specified and directed. Make-Havells/Usha/Khaitan/Orient

.Supply and fix MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with and including one MCB single pole 20 amps, 240 volts.

Supply and fix factory made V TPN DBs for MCCB Incomer, IP-43 protection with metal double door with suitable Size copper busbar with 2 neutral busbar, earth bar cables ties for cable management fully insulated busbar with set of wires and door earthing for provision of 100 Amps MCCB as incomer and included with SP/TP MCB's as outgoing 4 way 100 A MCCB+12 etc complete all as specified and directed Make-Schneider Cat part No A9HVD04L suitable for 100 Amps MCCB as incomer & 12 Nos SP Out going /Siemens/Schneider.

Supply and fixing MCCBs 100 Amps capacity, 415 volts, 4 pole, 25 KA, thermal magnetic complete all as specified and directed Make Legrand/Siemens/Schneider

Material and Labour for sub main wiring complete with 2 single core multi stranded copper conductor 4 sqmm (Nominal area) PVC insulated unsheathed cable drawn in and including medium grade PVC conduit ISI Marked not less than 25 mm dia concealed, including making good distrubed surface, of wall, including single core multi stranded copper conductor 4 sqmm size as earth wire drawn in same conduit complete all as specified and directed .

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, BLDC motor. Complete all as specified and directed Make: Havells/ Usha/Crompton

Supply and fixing of Modular Fan regulator,120 watts (Make : .Crabtree/Cona/Havells)

S&F Bell push Switch, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells.

S&F Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells.

S & F temper proof single phase energy meter (KWH) upto 30 Amps, 230 volts, digital display complete all as specified and directed

S & F 4 mm dia GI wire to connected building earthing to MCB DB Box complete all as specified and directed

NARESH KUMAR BEHERA

RANA ENTERPRISES