Construction of Toilet with 4 pan (Deep boring, pipeline and motor pump) in UMS Kander Under block- Gomia. Bokaro.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches all complete as per approved design, building specification and direction of E/I.BCD 5.1.1

Extra for earth work in hard soil as per specification and direction of E/I.(vide classification of soil item B) BCD 5.1.2

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I.BCD 5.1.10

Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.BCD 5.6.3

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) BCD 5.3.1.2

Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth, curring, taxes and royalty all complete as per builiding specification and direction of E/I. BCD 5.2.6

Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). BCD 5.3.5

Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. BCD 5.2.14

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).BCD 5.3.11

Providing 12mm thick Cement Plaster in CM (1:3) with water proofing compound -do- -do- all complete job as per specification and direction of E/I.BCD 5.7.4

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.BCD 5.5.29

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.BCD 5.5.30

Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I.BCD 5.5.12

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.BCD 5.7.6

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing, scaffolding taxes and royalty all complete as per building specification and direction of E/I.BCD 5.7.3

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. DSR 11.39

Providing 12mm cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 1.5mm thick cement punning including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. BCD 5.7.1

Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.BCD 5.7.2

Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.BCD 5.7.11

Providing Tor steel reinforcement of 10 mm dia bars as per approved design and drawing cutting, bending and binding with annealed wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. BCD 5.5.5 (a)

Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding, curing and taxes all complete as per building specification and direction of E/I.BCD 5.8.24

Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I.BCD 5.8.45

Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I "p" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. (A) 580 mm long (c) with 10 lit. low level PVC cistern. DWSD 3.2.1

Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.DWSD 3.2.5

Providing and fixing male ended 15mm dia brass bib cock of approved quality (wt. not less than 350 gms.) with extra socket all complete as per specification and direction of E/I.DWSD 3.1.5.1

Providing and fixing brass / C.I. stop cock of approved quality all complete as per specification and direction of E/I.15mm dia Brass Stop Cock DWSD 3.1.6.1

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes. DSR 12.41.2

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door - 110mm DSR 12.42.3.2

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° - 110mm DSR 12.42.5.2

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) - 110mm DSR 12.42.6.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20mm dia DSR 18.8.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge 32mm dia DSR 18.9.4

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.Group-A ED 1.1.1

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire ED 1.7.1

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire ED 1.7.2

Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm PVC conduit ED 1.21.2

Supplying and fixing of following sizes PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 32mm PVC conduit ED 1.21.3

Supplying and fixing of following sizes of PVC/G.I box on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm x 75mm x 50mm ED 1.22.1

Supplying and fixing of following sizes of PVC/G.I box on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.121mm x 173mm x 48mm ED 1.22.6

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required 4-3 pin 5/6 amp socket outlet ED 1.23.4

Supplying and fixing brass batten/angle holder including connection etc. as required. ED 1.34

Supplying and fixing of holder type LED - 9/10 watt ED M-855

Cost of drilling 200 mm x 165 mm x 125 mm meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic DTH Rig machine all complete including supplying all materials,tools,drilling rig, air compressor and equipments, as well as fuel, lubricant and cost of transportation of Rig machine and other vehicles up to the site (Basic rate) From 0-50.00 mtr DWSD M1035

Cost of drilling 200 mm x 165 mm x 125 mm meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with hydraulic DTH Rig machine all complete including supplying all materials,tools,drilling rig, air compressor and equipments, as well as fuel, lubricant and cost of transportation of Rig machine and other vehicles up to the site (Basic rate) From 51 - 150 mtr DWSD M1035

Supply of 200 mm dia x 3.00 m long UPVC casing pipe confirming to IS : 12818 : 2016 (CML No. 5543459) latest revision including carriage ( Basic rate) DWSD M1048

Supplying all materials,labour & tools for fitting and fixing 200 mm MS cap over casing pipe complete job DWSD M1036

Supplying submerible pump set confirming to IS 8034 and motor confirming toIS 9283 Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/ noryl impeller. Motor suitable for working on 415 V +_ 10 % 3 PH %) Hz A.C. supply with cable guard thrust carbon / fibre bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling . pump shall have suitable outlet as per manufacturer design. Anti thrust streamed lined non return valve shall be provided with pump 3 meter submersible copper conductor cable in single/double run shall be provide with each pump Submersible pump set 100 mm dia ( with polypropylene/noryl impeller) upto 20 stages 2.0 HP DWSD M 1055

Supplying all tools, equipments and labour and doing washing Flushing and development of drilled tube well to give clean and clear water all complete as per direction of E/I.DWSD M 1042

Supplying complete pannel borard with all accessories (starter 1 no, vot meter 1 no, amp meter 1 no. 10 amp kit kat) ( male & female) all complete job. L.S

Cost of 4 mm 2 flate copper cable finolex make for lowering the pump & connection up to pannel bord with all complete job.L.S

Cost of 32 m dia G.I. pipe 3 mtrs Length ( medium) with Seamless Socket as per relevent B.I.S specification IS:1239 (Part-I) / 2004

Carriage of Materials :- (i) Cement

(ii) Sand

(iii) Stone Chips

(iii) Steel

(iii) Bricks

Labour Cess 1%

Please Enable Macros to View BoQ information