SPECIAL REPAIR TO CERTAIN MARRIED ACCN AT KV AREA AT AF STN HASIMARA

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc. 1.5 Sqm each., complete all as specified and directed.

Taking down chowkat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc. 1 Sqm but n.exc 2 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc 1 & n.exc 2 Sqm each and refixing in same opening, complete all as specified and directed.

S&F 105X60mm size factory made pressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F 125X60mm size factory madepressed steel frames for doors, made out of 1.25mm thick PBI sheet with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F of 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type, on both sides, complete all as specified and directed.

S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, wire mesh etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc., complete all as specified and directed. (Note: Wiremesh to be measured and paid seperately)

S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification & drawings, complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

S&F 2nd class hardwood plain,solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed.

S&F mild steel flat as in hold fast, wall ties, plain angle, clean for securing purline to wood trusses, conforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F 18mm thick wooden grain PVC celluka ply fixed in shelves, partitions, of book cases, racks, cupboard and similar work fixed with screws/self tapping screws etc including all required accessory and builder hardware, as per direction, complete all as specified and directed.

S&F 25mm thick wooden grain PVC celluka ply fixed in shelves, partitions, of book cases, racks, cupboard and similar work fixed with screws/self tapping screws etc including all required accessory and builder hardware, as per direction, complete all as specified and directed.

S&F 300mm ordinary rat tail rod pattern springs including roller and roller plate of mild steel, complete all as specified and directed.

S&F of 150mm size mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

S&F 100mm long, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S&F 75mm long, butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S&F 300mm mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple, and fixed, complete all as specified and directed.

S&F aluminium handles, cast type, anodised, 150mm size, complete all as specified and directed.

S&F 75mm aluminium anodised hasp and staple, safety type and fixed with screws, complete all as specified and directed.

S&F ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.

M&L for preparing old wooden surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparing new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed.

S&F mild steel window with side hung shutter factory made including box type hinges with steel handle and steel peg stay, confirming to IS, complete with glazing bars, dovetailed or welded, complete all as specified and directed.

All as per item No. 26.00 here-in above but without glazing bars, complete all as specified and directed.

S&F steel ventilator with top hung shutter, factory made confirming to IS, including hinges, steel peg stay, complete all as specified and as directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fixed with tinned tracks including wooden beads, complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc framed guard for fixing arrangement for wire cloth and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F 3.00mm thick sheet glass, ordinary quality, and glazing with oil putty/wooden beads in square n exc 0.5 sqm in each pane, complete all as specified and directed.

S&F in repair of 3.00mm thick sheet glass, ordinary quality, and glazing with oil putty/wooden beads in square n exc 0.5 sqm in each pane, complete all as specified and directed.

S&F steel windows for industrial buildings, factory made confirming to IS, fixed type, with glazing bars, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed.

M&L for preparation of old decorated steel surfaces of width or girth exc 10cm and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed..

Demolition of brick, work built in cement mortar, including all quoins arches, pillars etc., complete all as specified and directed.

M & L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan exc 6m mean radius built in CM(1:6), complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size bricks, straight or curved on plan to any radius, built in CM (1:4) as in half brick thick wall including provision of 02 Nos 8mm dia TMT bars at every fourth course, complete all as specified and as directed.

M&L 15mm thick rendering in CM (1:6) on other than fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M & L for rendering 15mm thick in two coats (10mm+5mm each) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with integral water proofing compound top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item as supply only.)

M&L 5mm thick rendering in CM (1:3) on fair faces of brick work or concrete surfaces, finished even and smooth (without using cement), as on ceiling, complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of primer over 1.5mm thick wall care putty, complete all as specified and directed.

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and directed.

M&L for preparation of newly plastered ceiling surfaces and applying three coat of white washing, complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall including scrapping down existing finishes and applying two coats of distemper oil emulsion over a coat of primer over 2mm wall care putty on old plastered wall surfaces including prepation of surfaces, complete all as specified and directed.

M&L for preparation of old plastered wall surfaces of ceiling and applying two coats of white washing, complete all as specified and directed.

Dismantling of floor, hearth or wall tiles including cement mortar bedding ( but not backing) and remvoing rubbish off the premishes, complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x7mm/450x350 x7mm thick each as in skirting or dado on vertical surfaces of wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4), complete all as specified and directed.

M&L for 40mm thick, PCC (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) in alternate bays and finished the surface even and smooth using extra cement, complete all as specified and directed. Note- Glass strips shall be measured and paid separately.

M&L for 3mm thick glass dividing strips, width of strip 38mm, inserted in position, conform to design, complete all as specified and directed.

M&Lfor 14 - 16mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in repair, complete all as specified and directed.

S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or fixed with tinned tracks including wooden beads, complete all as specified and directed.

Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

Re-fixing old steel tubing and connection 15mm bore in new or old position complete on wall/ceiling, complete all as specified and directed. (Note: Serviceable steel tubing obtained from taking down shall be re-used.)

S&F 15mm bore galvanised steel water tubing and connection, medium grade, with all fitting, fixed concealed to wall or in ceiling complete, including cutting chases not exceeding 10cm girth and making good surfaces with CM (1:3), complete all as specified and directed.

Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed.

S&F 20mm bore galvanised steel water tubing and connection, medium grade, with all fitting, fixed to wall or ceiling, complete all as specified and directed.

Re-fixing old steel tubing and connection 20mm bore in new or old position complete on wall/ceiling, complete all as specified and directed. (Note: Serviceable steel tubing obtained from taking down shall be re-used.)

S&F in repair vitreous china squatting pan ,"Orissa pattern" white, size 580x 440mm with integral foot rest, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti -syphonage pipe etc., complete all as specified and directed.

S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with inlet ball valve, float and handle and connection to pipes, complete all as specified and directed.

S & F in repair stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 550x 400 mm including PVC waste pipe 32mm bore, waste coupling including cutting for and pinning in ends of brackets etc, complete all as specified and directed.

S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed.

S&F in repairs 15mm bore, fancy type, chromium plated, stop valves,concealed type, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed.

S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure, screwed for iron pipe & fixed (minimum weight 90gms), complete all as specified and directed.

S&F in repair 15mm bore angular stop cock, chromium plated, complete all as specified and directed.

S&F in repair swivel shower rose 125mm size, brass, chromium plated, with long head arm for fixing with 15mm pipe, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F stainless steel plate rack of size 0.75m x 0.78m, standard quality, weight not less than 6 Kg, fixed with brass screw, complete all as specified and directed.

S&F in repairs 20mm dia brass chromium plated towel rail D type. 60cm long between flanges, fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 170gms), complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks, triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1989, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding dismantling of old water tank, complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm incl 32mm dia waste pipe of polyethylene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM (1:3) if required, complete all as specified and directed.

Demolition and breaking up drain pipes 100mm bore / 75mm bore (salt glazed stone ware, AC or reinforced concrete) set in cement mortar, complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) rain water pipes,single sockets, in any length with sealant rubber ring joints fixed to wall incl necessary MS flat iron clamps of size (40x4mm), complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) rain water pipes,single sockets, in any length with sealant rubber ring joints fixed to wall incl necessary MS flat iron clamps of size (40x4mm), complete all as specified and directed.

S&F in repair of 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.

S&F in repair 75mm bore, PVC (SWR) bends provided with access door, of any radius, complete all as specified and directed.

S&F in repair 75mm bore PVC (SWR) junction, single, (single T) equal or unequal, complete all as specified and directed.

M&L 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solven cement as in repairs, complete all as specified and directed.

S&F in repair CP grating 100mm dia with or without waste hole, fixed to floor trap, complete all as specified and directed.

S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipes, complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed. (Note:-Reinforcement cut as required to facilitate demolition.)

Cleaning the plastered surfaces by using wire brush , brooming down and washing down with water to remove dust etc. and brushing with neat cement slurry @0.5 kg/sqm with acrylic based polymer modified cementitous composite @ 0.50 kg/sqm, complete all as specified and directed.

M&L 10mm thick rendering on fair faces of brick work or concrete surfaces of sunken floors including in CM (1:3) with using water proofing compound @ 3% by weight of cement in sunken portion, complete all as specified and directed.

Supply only Integral water proofing compound, complete all as specified and directed.

M&L for PCC (1:5:10) type E-2 (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified including dismantling of old CGI sheets, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws as specified including dismantling of old PGI sheets, complete all as specified and directed.

S&F mild steel work in tubular trusses, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including applying one shop coat of zinc chromate primer paint after preparation of surfaces, complete all as specified and directed.

M&L for 6mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605x605 mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary demolition/dismentaling of existing unserviceable ceiling boards of any thickness incl cover fillets, complete all as specified and directed.

Roughening surface of old concrete roof by picking, sweeping clean and washing down with water using wire brush brooming down and applying the following treatment all as directed in order of precedence as stated : (i) Rendering 15mm thick in CM (1:4) on existing roof surface true to level. (ii) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (iii) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric/matt weighing not less than 160gms per Sqm having softening point not less than 150° C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (ii) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. (iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017. (iv) Applying one coat of aluminium paint @0.11 Kg/Sgm over APP membrane surface (v) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (vi) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work. (vii) The work shall be executed through authorised applicators of original manufacturer only.

S&F disconnecting existing tanks, capacity exc 250 ltr & n. exc 500 ltr, setting aside (or lowering, if required) for repair of roof, cleaning and removing all scale and dirt etc. and from mouths of circulating pipes etc, hoisting, if required, re-fixing in position and reconnecting, complete all as specified and directed.

M&L for RCC (nominal mix) (1:2:4) type B1 (using 20mm graded crushed stone aggregrate) for repairing chajjas etc. including necessary form work, complete all as specified and directed.

S&F in repairs 25mm dia harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 30cm wide chromium plated bracket guard and railing, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring complete (light,fan, plug point & power complete alongwith fittings (switches, ceiling roses, tube light fittings, bulk head fitting regulator, sockets main switches, DB removing materials to store & making good of disturb surfaces of wall/floors etc, complete all as specified and directed.

M&L for point wiring complete as specified with 1100 V grade with 1.5 Sqmm single core PVC insulated unsheathed FRLSH cable, copper conductor multistranded passing through including concealed PVC conduit not less than 20mm dia with concealed modular box suitable for logic modular switches, sockets, etc and logic modular cover plates, sorroundings of suitable size as required at site with PVC insulated FRLSH unsheathed stranded copper conductor of size 1.5 sqmm as earth wire connected to common earth dully for one light point/one fan point controlled by one, one way swtiches, complete all as specified and directed. Note: - (i) Rate quoted shall include for cost of flush metal box and concealed in wall, including cutting and sinking of boxes and making good to the walls. (ii) Provision of cover plates/sorroundings of any module/blank plates as per site requirement shall deemed to be included in the quoted unit rate.

All as per item No 104.00 here-in before but for 5 Amp switch socket on the same board, complete all as specified and directed.

All as per item No 104.00 here-in before but for 5 Amp switch socket on independent board, complete all as specified and directed.

All as per item No 104.00 here-in before but size of cable 4.0 sqmm with earth wire of 4.0 sqmm but with independent circuit from the DB, complete all as specified and directed.

Al as per item No 104.00 here-in before but for 2 way point wiring with cable of size1.5 sq mm with 1.5 sqmm earth wire suitable for light points at stair case, complete all as specified and directed.

All as per ser item No. 104.00 here-in before but one bell/buzzer point controlled by one push button on the same board with other switches, complete all as specified and directed.

S&F switch, modular type, single pole, one way, 5/6 Amp, one module, complete all as specified and directed.

S&F switch, modular type, single pole, one way, 15/16 Amps, one module, complete all as specified and directed.

S&F socket outlet modular type, multipurpose, having provision for 3 pin, 5/6 Amp and 2 pin, two module, complete all as specified and directed.

S&F socket outlet modular type, multipurpose having provision for 3 pin, 15/16 Amp and 3 pin 5/6 Amp two module, complete all as specified and directed.

S&F bell push, modular type, single pole, 5/6 Amp, one module, complete all as specified and directed.

S&F switch modular type, single pole, 2 way, 5/6 Amp, one module, complete all as specified and directed

S&F fan step regulator modular type, two module, complete all as specified and directed.

S&F in replacement of bell ding dong type AC, 230 volts, single phase complete all as specified and directed.

S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old ceiling fan, any type and deposited to AGE E/M store yard, completes all as specified and directed.

S&F 40mm bore GI pipe 'heavy grade' with complete fittings such as bends, tees, elbows, reducers, flanges, fixed for hanging the ceiling fan and fixed with the necessary fan hooks/accessories for fitment of ceiling fan etc, completes all as specified and directed.

S&F exhaust fan, steel body AC, single phase, 230V of size 300mm sweep with, blades, and frame and louvers including cutting wall for fixing exahaust fan of size 300mm sweep and making good the opening in CM (1:3) or PCC (1:2:4) type B1 as required at site, completes all as specified and directed.

S&F in replacment of ceiling rose of size 65 x 50mm, surface bakelite, three terminal, completes all as specified and directed.

S&F in replacement decorative, wall mounting, Opal Glass with Nickel Finishing Wall Lamp brushed nickel finish fixture with acrylic diffuser suitable with 9 W LED lamp B22 base fittings, completes all as specified and directed. (Make: Havell's Cap Part No. JNL-CHR-WLRB0480SE27 or equivalent model in Philips/ Wipro/Bajaj.)

S&F LED lights fitting 1x 20 W, 220V,AC , box type with driver, LED lighting fixture with extruded aluminium channel, including LED tube light of 20watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, completes all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V, AC, decorative type with driver, LED tube light of 10watt connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, completes all as specified and directed.

S&F electric water heater, storage type, vertical mounted, rust proof ABS outer body, with high quality steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 star rated, complete with all accessories such as safety valve, thermostate, NRV, connection piece etc Including PVC connection pipe for hot/ cold water to existing water lines,necessary fixing arrangement by using 50 X 5mm ( Max) MS flat/Inbuilt fixing arrangement as per OEM and writing MES No. by synthetic enamel paint, completes all as specified and directed. Make: V- Gaurd Model Pebble 25 (Metalic Blue/Olive Green Series) Havell's model Bianca (White Blue /Ivory Champagne gold) / Equivalent model in Racold /Bajaj/Crompton.

S&F MCB DB, TPN, 4 way IP 43 protection ,double door , concealed on wall, completes all as specified and directed.

S&F MCB DB, SPN, double door 12 way, IP 43 protection concealed on wall, completes all as specified and directed.

S&F MCB SP 6 to 32 Amps, 240V, 10 KA, 'B' curve, including connection of testing, completes all as specified and directed.

S&F MCB SPN 6 to 32 Amps, 10 KA, 'C' curve, complete all as specified and as directed.

S&F MCB 4 pole, 63 Amps, 10 KA, 'C' curve, complete all as specified and as directed.

S&F power unit up to 16/25 Amps including 02 module metal box for mounting of power unit, complete all as specified and directed.

M&L for submain wiring wiring with two single core PVC insulated unsheathed, multistranded flexible copper conductor 1100Volts grade, FRLSH type, cables 6 Sqmm drawn in and including heavy duty PVC casing-caping/PVC conduit not less than 20mm size including 6 Sqmm 1100 Volts grade, FRLSH type, PVC insulated unsheathed multistranded flexible copper conductor cable as continuous earth wire and connecting to common earth dolly, complete all as specified and directed. Note:-(a) Three runs of cable shall be measured as one length of sub main. (b) PVC casing-caping/PVC conduit and its accessories is deemed to be included in the unit quoted rate.

All as per ser item No. 132.00 here-in before but 4 Sqmm, complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3cm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 20mm bore and watering pipe GI medium grade of 20mm bore and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC (1:3:6) type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion, complete all as specified and directed. Note: (a) In case of satisfactory results not achieved or results degrade during one year of recharging of the earthing, the same shall be made good/recharged again in order to have required test results within contract/defect liability period without any extra cost to the department. (b) Necessary compound required for recharging shall be measured and paid separately.

S&F LED Flood light 50/60 W IP 65 (For building security light) along with fixing accessories on wall/pole, complete all as specified and as directed.

Taking down single phase electric energy meter any type and refixing, complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core including taking down old unserviceable UG cable, complete all as specified and directed.

Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole/stay, or cable trenches and getting out in soft/loose soil, complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25cm in soft/loose soil, complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point in any type of soil, complete all as specified and directed.

Supply and laying double walled corrugated (DWC) HDPE duct pipe of 40mm dia conforming to IS, approved colour complete with fittings for cable protection, complete all as specified and directed.

M & L for boring of holes under road, pavement, hard standing by using trenchless technology, using ultra sounding technique and necessary machine including providing HDPE/DWC pipe of 50mm bore suitable for 0.4 mpa working pressure, complete all as specified and directed.

Supply and laying CPVC pipe of size 25mm bore high pressure CPVC pipes SDR-13.5 & plain CPVC, SDR 11, fittings complete laying in trenches/wall/floor/roof terece with necessary saddle /clamps including laying on wall up to service tank of G+1 Bldg including all necessay fittings, like Elbow, Tee, Socket, Reducer, bushings, step over bends, end caps, End plugs, etc and with CPVC solvents cement including taking down old unserviceble pipes, complete all as specified and directed.

S&Fg CPVC ball valve of size 25mm bore, complete all as specified and directed.

Cutting existing GI pipe line of size upto 80mm dia / taking branch connection from CI/DI pipe line and making connection with CPVC pipe line with suitable fitting, complete all as specified and directed.

Note: An amount of Rs.49962.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S JAGDISH PRASAD AGARWALA

M/S. VINITA CONSTRUCTION

M/S ASHOK ENTERPRISE

M/S I P GROUP

M/S SANMILAN NANDI

M/S ANNI ENTERPRISE

SHRI SURAJIT SIKDER

M/S ANIL KUMAR BAUL