WC-007/2022-23 33 KV LINE Augmentation Ottanatham

Amount

Excavation of Stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit upto 9.14 mtr Pole by using JCB or manual

Excavation of RSJ pole pit above 42' by using JCB or manual

Erection of 9 mtr PSC poles by using JCB or maual

Erection of RSJ Rail, fabricated poles above 36'-0' by using JCB or maual

Erection of stay set complete

Fixing of 5" "V" cross arms (all types) / channel cross arms/ guarding Cross arms

Tapping X arm

Fixing of HT/LT TI Fittings

Fixing of pin Insulators with Pin 33 KV

Fixing of 11 KV strain disc.

Painting and numbering of poles (existing & new)

Earthing of pole with pin including burying looping and binding

Paving of Conductor, stringing, binding Jumpering etc., complete with Dog conductor for both HT lines with LC work.

Concreting of Poles as per Board standards (2*2*5). The material such as sand, jelly, etc., have to be supplied by contractor including Cement supplied by Contractor (Cement concrete mix 1:4:8 using 40mm hard broken stone including cost of labour Charges for placing Transporting of Sand, jally, from box and water curing etc,. complete as per field Engineer's instructions.

Transport of poles/Materials/ conductors and other materials from store to site ( for Hired Vehicle) beyond 20KM

Loading/Unloading of poles upto 9 mtr PSC poles & RCC Square Pole

Loading/Unloading of poles above 36'-0' RSJ pole

Dismantling of 7/3.35sq.mm ACSR with LC work

Dismantling of 9 mt Poles

Removing the HT TI fitting

Removing the HT pin Insulators with pin

Alteration of Stay clamp

Erection of D.P. structure with AB switch top channel, cross bracing, HG fuse set, earthing, painting, providing stay and pole concreting as per field Engineer's instructions.

Alteration of Back clamp

Aluminium painting including labour,materials,lead,lift etc., for all types of x arm/channel/clamps/Bolt & Nut Etc., for above works

Cutting of coconut leaves (per tree)

Drilling of hole in channel only 3/4" & 1" etc., per hole

E.P.F. @13 % should be Entered by the Bidder

E.S.I. @3.25 % should be Entered by the Bidder

G.S.T. @18% should be Entered by the Bidder