PROVN FOR GUARD ROOM WITH ELEVATED SENTRY POST ZONE C, KOTA FLOORING FOR TECH BLOCK (BLDG NO P-221) AND PROVN OF ONE GUARD ROOM NEAR P-38 AGE BR-II UNDER GE N BIKANER

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil

Excavation in trenches , n exc 1.5m wide and n exc 1.5m in depth for wall foundation etc or for shaft, well, cesspits, manholes, pier holes etc n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil

M&L PCC 1:4:8 Type D2 using 40 mm thick greded stone aggregate as in foundations,filling and mass concrete.

M&L brick work with fly ash bricks (old size) straight or curved on plan exc 6m mean radius built in CM 1:6.

M&L for brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil

Removing excavated material n.exc 50 mtr & depositing where directed at a level n.exc 1.5 mtr above/below the starting point.

M & L 40mm thick Damp proof course to horizontal or vertical surfaces incl necessary formwork with PCC 1:2:4 type B-0 & mixing of water proofing compound as per manufacturer's instructions.

Earth filling under floors or in foundation incl watering, ramming and consolidation complete as directed.

M & L roughly squared stone lintels, beams, hammer dressed on face and soffits, hoisted, set and pointed in CM 1:4 complete n exc 3m in length.

M & L stone for chajja,hammer dressed on face and soffits,hoisted,set and pointed in CM 1:4

M & L Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4. complete all as specified and directed.

M & L for design mix RCC M-25 (20 mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified.

M & L for design mix RCC M-25 (20 mm graded aggregates) as in columns, pillars, piers, posts and struts complete all as specified.

M & L for design mix RCC M-25 (20 mm graded stone aggregate) in slab supported on walls, beams and coloums in roofs, floors, balconies, canopies desk slabs and in selves etc complete as specified.

M & L for design mix RCC M-25 (20 mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter for rough finished surfaces of concrete flat complete all as specified.

Formwork to sides of pillars, posts, struts, piers,columns, and stanchions for rough finished surfaces of concrete square,rectangular,polygonal complete all as specified.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, rough finished surfaces of concrete flat complete all as specified.

M & L for Formwork in soffits of suspended slabs such as roof slabs, landing ,and similar work not exc 200mm thick rough finished surfaces of concrete flat complete all as specified.

M & L for form work to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.

M & L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to cmplete as specified.

M&L for Mild steel TMT bars 8 to10mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete.

Ditto but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified.

M & L for 5 mm thick cement plaster in CM 1:3 on concrete surface finished even nd smooth complete all as specified and as directed.

M & L for three coats of white wash on roof ceiling including preparation of newly plastered surfaces complete all as specified.

M & L 75mm thick PCC 1:4:8 type D2 using 40 mm thick greded stone aggregate as sub base in floors all as specified.

M & L 25mm thick PCC 1:2:4 Type-B0 using 20 mm thgick greded stone aggregate as in flooring complete all as specified.

Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0

M&L for 20-25 mm thick single piece machine cut kota stone slab as in flooring/steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified.

M&L for machine cut kota stone slab 20-25 mm thick as in riser / steps, skirting, dado and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L Non skid coloured Ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors on 15mm thick screeding in CM 1:6. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

Glazed ceremic tiles coloured 450X300mmX7mm/350x250x7 mm thick coloured,set and jointed in neat cement slurry and pointed in white cement or coloured to match colour matching with floor tiles as on vertical surfaces laid over 10mm thick cement screed in 1:4.

M & L cement plastering 15mm thick in CM 1:6 on other than fair face of brick work surface finished even & smooth w/o using extra cement complete all as sepcified.

M & L for two coats of distemper oil emulsion on walls on newly plaster surfaces of walls incl preparation of surfaces.

M&L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement using integral liquid water proofing compound and complete. Note : WPC shall be measured and paid seperately.

M & L for two coats of Synthetic enemal paint/camouflage paint over a coat of priming coats including preparation of new plastered surfaces complete all as specified and as directed.

M & L preparation of steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exec 0.5 sqm in each pane.

S & F 4mm thick sheet glass pin headed type and glazing with oil putty in square n exec 0.5 sqm in each pane.

M & L PCC 1:3:6 type C-1 using 20mm graded aggregate as in bed blocks etc for fixing windows, doors frames or other structural section as directed.

S & F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved.

S & F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the steel frame at site as per specification.

S&F Factory made Double extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 65 x 150 mm comprising of virgin PVC polymer, calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F Factory made single extruded WPC (Wood Polymer Composite) skeleton door solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, ater/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.

Supply and fixing 100mm long stainless steel butt hinges heavy duty including steel screws for fixing complete all as specified and as directed by Engineer-in-charge.

S&F Aluminium cast handles cast type anodised, 150 mm size complete.

S&F Aluminium barrel tower bolts of extruded section 200 mm long complete.

S&F Aluminium sliding door bolt 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed and complete.

S&F Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete

S&F vitreous china wash hand basin flat back size 550X 400 mm including cutting for and pinning in ends of brackets or erecting stand etc complete.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)

S&F PVC low level flushing cistern.valve .less, syphonic action type 10 liters capacity with inlet, ball valve, float and handle with including brackets and PVC bend pipe 90cm long etc. supplied and fixed.

S&F Rotational moulded polyethylene water storage tanks of capacity 1000 litres, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and directed by Engineer-in-Charge.

S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated alum rod and high density plastic ball screwed for iron pipe and fixed.

S&F Bib taps cast copper alloy fancy type with crutch or butterfly handle screwed for iron pipe of 15mm bore and fixed.

S&F CP towel rail 450 mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified.

S & F pillar tap cast copper alloy fancy type screwed for iron pipe on both ends of 15mm bore and fixed.

S & F in repairs, 15 mm bore chromium plated concealed type stop valves cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes complete all as specified.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L Brass chromium plated shower rose 125 mm size including fixing to steel pipe or union fixed as directed by Engineer in charge .

S&F fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F PVC connections 15mm size with brass nuts of length 450mm complete all as specified.

Supplying and laying of CPVC pipes of 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches, wall((100mm away from wall using sutaible clamps) complete all as specified.

Supplying and laying of CPVC pipes of 25 mm dia SDR 11 & Plain CPVC SDR 11 fittings in trenches, walls(100mm away from wall using sutaible clamps) complete all as specified.

S&F male/female brass threaded adaptor(FTA/FBTA) complete all as specified

S & F PVC (SWR) pipe of 100mm bore fixed to wall or laid in trenches complete as specified and as directed.

S & F PVC (SWR) pipe of 75mm bore laid in floors or trenches complete all as specified.

S & F PVC (SWR) bend any radius of 75mm bore jointed with solvent cement

S & F PVC (SWR) junction double (Single tee) of size 75mm bore jointing with solvent cement.

S & F PVC (SWR) floor trap plain with grating including jointing with solvent cement of size 75mm outlet.

M&L for 10mm thick Rendering in cement mortar 1: 4 on concrete surfaces, finished Fair & even including mixing water proofing compound as per manufacturer's instruction. (Note :- Water proofing liquid shall be measured and paid separately)

M&L for roof treatment in as specified below and as directed: (a) cleaning, washing of surface and removing any debris, Surface should be free from any loose paint, dust or grease (b) Applying one coat of Elastomeric PU based liquid membrane diluted with portable water in the ratio of 1:1 and apply @ 0.40kg/sqm (c) laying polyster reinforced fiber Net/50 Gsm Geotextile mese, upto 300 mm on walls. (d) Applying two coats of undiluted PU based liquid membrane, having elongation more than 400 %, tensile strength more than 2 N/mm2 and alkali & fungal resistant maintaining thickness of 1.5mm, with brush/roller upto 300mm on walls. (e) That complete treatment to be carried out by authrised applicator of waterproofing manufacturer. Make : Asian/fosroc/Dr fixit etc. Note : (i) The treatment shall be carried out as per the manufacturers instructions, and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound ISI marked @ 200ml per 50Kg of cement content.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement laid in bags n.exc 2.50mm in length,joints filled with bitumen mastic complete all as specified and as directed

S&F 4mm dia Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured)

M & L for framed brackets of angles cut to shape,drilled and countersunk for screw.including bending and welding angles,as necessary conforming to Fe 410-0 or Fe310-0 all as specified.

M & L for PCC 1:3:6 type C-1 using 20 mm thick greded stone aggregate in chowkhats filling complete.

M&L 60mm thick factory made coloured mixed with pigment precast concrete interlocking paver block of Grade M-35 confirming to IS 15658-2006 of any shape and size as directed with grey cement and pigment complete all as specified and as directed.

M&L for 25mm thick sand filling under floors, cushning under interlocking tiles or in foundations incl watering and consolidations complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in sub base,surface finished fair and even complete all as specified and as directed.

M & L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed

S&F Stainless steel drapery rod of 25 mm inner dia & 1.6mm dia wall thickness (in lengths as directed) with & including stainless steel sockets & decorative finial at both ends and pair of stainless complete all as specified.

Preparation of old plastered surfaces of walls and applying one coats of white washing complete all as specified and directed.

S&F factory made mild steel Window/ Ventilator box type with upper top hung shutters and bottom fixed type shutters including pintol hinges,steel peg stay and one shop coat of red oxide primer complete all specified. Note : i) The window shall be fabricated as per Drg No CEBTZ/TD/888R & 889 ii) Glazing, wire gauge shall be measured and paid separately

Applying primimg coat of cold bitumen primer at the rate of .40 ltr/sqm incl cleaning surface complete all as specified and directed.

S&F APP based polymeric membrance min weighing 3kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric land on primed surface by force application complete all as specified.

M & L Lime concrete terracing as in roof specified on roof complete all as specified and as directed

M&L 40mm thick brick tiles laid on mud mortar and joints / grounting flush and jointed in CM (1:3) mixed with crude oil @ 3% by weight of cement on mud phuska,complete all as specified and directed by Engr In Charge

S&F 1.25 mm thick Pressed steel frames of size 125 mm x 60mm for single doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as per IS provns.

S&F Second class hard wood factory made plain, framed, panelled shutters 35 mm thick, (any number of panels) with panels of timber flat on both sides (feather edged) or of12 mm thick veneered partcile board medium density wood particle board with commercial faces venners supplied and fixed to chowkats.

S&F Second class hard wood, glazed and skelleton shutters 30mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fixed to chowkats.

Preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of pink primer.

Excavation over area n exc 1.5m in depth for wall foundation etc or for shaft, well, etc n exc 10 sq m on plan and getting out in soft/loose soil

M&L Brickwork with burnt bricks straight or curved on plan exc 6 m mean radius for man-holes/ septictank/ soakwell etc. in sewer works

M&L Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid, including intercepting chamber, screen chamber Brick work in CM, Stone patti cover slab, filling with brick bats complete of size 3.00 M dia X 3.0 M deep complete all as specified and as directed.

M&L concrete bed to drain pipe in PCC 1:4:8 type D2 using 40mm graded stone aggregate incl packing under and hunching against sides of pipe after they are laid on slope and tested for 150mm dia bore sewer pipe line ( earth work excavation and sewer pipe line will be measured and paid separately)

M&L for DWCPE (SN8) confirming to IS-16098,150 mm Nominal bore (160 mm OD) complete laiding and jointed incl testing along with necessary jointing material tees /union /socket etc complete as per manufacture instructions and complete all as specified and directed.

M & L precast cement concrete but in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces Type B1 1:2:4 (20 mm graded aggregate Set in Cement Mortar 1:4 complete all as specified.

M & L for point wiring for one light/fan/bell/buzzer point controlled by one way switch with 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) including 1.5 sqmm single core PVC insulated and sheathed multi stranded copper conductor FRLSH cable 1100 volts grade (ISI Marked) as continues earth wire in green colour to coomon earth dolly laid/drawn into and including non metalic PVC concealed conduit (medium duty, ISI marked not less than 20 mm dia) with all fittings such as tee, bends etc all as per IS terminated in & including new modular metal flush boxes of requisite module concealed in wall for mounting fittings like modular Switches, sockets, regulators etc with and including modular cover plates with frame of requisite modules all as specified and as directed: Notes:- (i) Cost of cutting/leaving forming chases for conduit, sinking for metal flush boxes and making good in CM 1:4 shall deemed to be included in quoted rate of this item. (ii) The quoted rates of this item shall deemed for include for modular metal flush boxes of requisite module and modular cover plate with frame of requisite module of colour as approved by GE

(b) One pin 5 amps socket point on the same board with other switches complete

(c) One multi pin socket 5/6Amps, Independent.

Ditto all as per item No 104 here -in- before but for one 3 pin 15/16 Amps socket outlet controlled by one 15/16 Amps switch on independent board with 2.5 sqmm single core PVC insulated and and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) including 2.5 Sqmm single core PVC insulated and sheathed multistranded copper conductor FRLSH cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour complete all as specified and directed .

S&F switch Modular type, 6 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

S&F switch Modular type, 16 Amp, 1 module single pole one way, 230 Volts, Modular type complete all as specified and as directed by Engr- in -charge.

M&L socket outlet 3 Pin 6 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

M&L socket outlet 3 Pin 6/16 Amps modular type, 2/3 pin combined 2 module 230 Volts complete all as specified and directed by Engr-in-Charge.

S&F ceiling rose, surface backelite , three terminal AC, 230 volt complete all as specified.

S&F LED tube light fitting, 1x 20-22 watts, 230 volt, basic all purpose surface and wall mounted led batten with polycarbonate housing & integrated electronic driver, pre-wired and fixed on walls with all fixing accessories such as screws, clips etc and connecting up with two core flexible copper conductor cable of size 24/0.20 sqmm complete all as specified and directed by Engr-in-charge.

M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed by Engr-in-Charge.

Supply and fixing LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-charge.

S&F GI bracket made out of 40 mm bore GI pipe light grade /medume grade, ISI marked, medium grade 1.2m long bent to shape suitable for fixing of street light fitting including with 2 Nos MS clamps made with 40x3mm flat iron, bolts, nuts, washers etc including two coats of synthetic enamel paint over one coat of zinc chrome primer and fixing on electric pole complete all as specified and as directed by Engr-in-Charge.

Supply and hanging/fixing ceiling fan 1200mm sweep AC supply (input voltage range 120 to 280v), BLDC type, 5 star rated BEE and ISI marked, super enameled copper winding of 'B' class insulation, single phase 20 watt (+ 10%), PF 0.90 (MIN), air delivery of 220 CUM per min (CMM), 350 RPM (+ 10%), TEMP RISE 40 DEGREE MAX, without remote, with electronic regulator, 3 blades, down rod length of 60/72 inch including accessories, total harmonic less than 10%, 5 speed, hanging in position, including making connection wih and including flexible cord twin core twisted copper conductor of size 23/0.0076 from cealing rose to fan complete all as specified and as directed. Note :- (i) Sl No of cealing fan and GE office name shall also be writing on fan with red colour permanant marker. Cost for the same shall deemed to be included in quoted unit rate. Nothing shall be paid extra on this account.

Supply and fixing fan step regulator modular type,120W -2 module electronic socket type five step controlled 230V AC 50 Hz for complete all as specified and directed by Engr-In-Charge.

S & F double door, sheet metal enclosure, powder coated for MCB DB SPN 8 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB SP, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

S & F MCB SPN, 5-32 Amps , 240 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size omplete all as specified and directed by Engr-in-charge.

Supply and fixing exhaust fan (heavy duty) steel body, AC single Phase 230V, 50 Cycle per second, size 300 mm sweep with blades and frame including new GI wire mesh heavy duty with wooden frame protection against birds etc including provision of cutting of existing wall for suitable opening as per fan, including electric connection with and including new 1 Sqmm, 2 core flexible copper conductor cable from ceiling rose to fan, fan hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note :- Serial Number of exhaust fan issued by Engr-In-Charge and GE Office name shall also be written on fan with red colour permanent marker.

Supply and fixing LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and as directed by Engr-in-charge.

S & F double door, sheet metal enclosure, powder coated for MCB DB TPN 4 way fitted with neutral link, earth bar , din rail and 200 amps rated bus bar 230 volt conforming to IS 13032-1991 complete all as specified and as directed by Engr-in-charge.

S & F MCB TPN, 40 to 100 Amps, 415 volts, breaking capacity 10KA complete all as specified and as dircted by Engr-in-charge.

S&F in of sheet metal enclosures with socket, plug top complete with one single pole MCB -240 Volt- 20 AMP complete all as specified and as dircted by Engr-in-charge.

S & F water heater storage type 25 Ltr capacity, BEE 5 star and 8 bar pressure rated stainless steel (minimum wall thickness 2 mm) tank with feroglass coated inner container energy saving high density PUF insulation vertical ABS shock proof plastic body grouting of studs in wall in cement motar (1:3) nuts, washers, provision of two Nos PVC braided connection 450mm long heavy duty with brass nuts and two Nos brass chromium plated angular valve,thermostate,NRV ,TOP PLUG 20AMP with valve flange suitable for 15mm bore pipe for water supply connection complete. Make : Havells (Model -Monza EC) Cat part No GHWAMFSWH025/Bajaj calenta storage/Cromton solarium Qube

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level connecting to the galvanised earth lead wire 4.0 mm dia by means of bolts, nuts check nuts and washers of galvanized iron and steel earth wire protected by provision of GI mediumgrade pipe 15mm bore including provision of concrete pit made with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4Kg/Sqm) and frame of angle iron 40x 40x6 mm and handle of 6mm dia MS bar made to shape, GI light grade 20mm bore pipe for watering perforated at bottom, 1.75meter long placed on top edge of earth plate, common salt & charcoal filling with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electrical plate No -5 of SSR 2009 Part-I and connecting to Lighting protection earth test points all as specifed and directed including testing on completion.

Supply & Laying & commissining of LT UG cable XLPE sheathed PVC insulated, screened PVC bedded, galvanised steel strip of wire armoured electric power cable heavy duty with stranded aluminium conductor 1100 volts grade, laid in tranches, in GI pipe, including brass cable glands, clamps etc of size 04 core x 10 Sqmm complete all as specifed and as directed. Note: Earthwork, sand cushioning, bricks, GI pipe, etc will be measured and pad under appropriate items.

Supply and fixing GI Pipe light grade of Size 40 mm bore with all fittings for passing of cables fixed to pole/wall/laid under floor or roads including all fixing accessories complete for protection of cable all as specified and directed. Make: Jindal/ Bansl/Tata

Supply and Laying Double wall corrugated pipe(DWC pipe, Specification-120 mm OD/103 mm ID) for laying XLPE LT UG cable by DWC pipe throughout the LT cable length in pieces of convenient lenth .(Note : in pieces for easy rectification during fault ).

Supply and fix desert cooler electric driven (single phase) having nominal air flow capacity of 4000 cum as per hour or nearest size.Steel Body complete all as specified & directed by Engr-in-charge. Specifications- Size-26''x26"x39" made out of 18 Gauge galvanised sheet , depth of tank shall be 10"-11" electric driven, 230 volt , single phase , 50 Hz Fan Motor- 145 watt, 1400 RPM single phase, 400-500 mm sweep , aluminium blades. Submersible water pump - 20 watt, 220/240 volt , single phase , 50 Hz having lifting height of 2 meter .

Steel water tubing medium grade galvanized including tube fittings viz tee, sockets bends, elbow, union, nipple etc with screwed and socketed joints laid in trenches/ under floor/ under road or laid in floors complete all as specified for 20 mm bore complete all as specified & directed by Engr-in-charge.

Supply, laying and jointing GI tubes, medium grade 25mm dia in lengths with screwed and socket joints together with all galvanised steel fittings such as bends, elbows, tees, union, short pieces, connectors, check nuts, caps, plugs etc fixed complete laid in trenches/wall complete all as specified and directed by Engr-in-charge

Supply and fix PVC Connection 15mm size with PTMT nuts of length 300mm (for Evaporative Air Cooler) complete all as specified & directed by Engr-in-charge.

Supply and fix ball brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed of size 15mm.(for Evaporative Air Cooler and water cooler) complete all as specified & directed by Engr-in-charge.

Cutting existing pipeline 80/100 mm dia and inserting the tee/ferrule connection for branch connection for 25 mm dia GI pipe complete all as specified and directed by Engr-in-charge.

S&F Gun metal gate valve 25mm bore with iron wheel head screwed both ends for iron pipes complete all as specified and directed for the following sizes-

SHREE JASWANT CONSTRUCTION COMPANY (BID ID -3381653)

SUBHAM ENTERPRISES (BID ID -3381182)

Durga Construction Company (BID ID -3381344)

M S GROUP (BID ID -3389983)

Beenu Co. Company (BID ID -3390253)