Providing House Hold connection by Ministry of Jal Shakti Har Ghar Nal se Jal under Jal Jeevan Mission under LWSS Nounghi Bhumpal, Lahar Kotlu, Niyati, Rangas and multi village under IPH Sub-Division Nadaun under Nadaun Consty. Sub Head Construction

Amount

Excavation in foundation , trecnches etc., in all kinds of soil such as pickwork, jumper work blasting work,kankar moorum,singles including decomposed soft and hard rock,including chiselling wedging clearance of bushes etc.including shoring, dewatering etc. in all leads and lifts stacking the excavated soil not more than 3 meters clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinth and sides of foundation etc. consolidating each deposited layers by remming and watering and then disposing of all surplus earth within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work.(PJ)

Providing and laying cement concrete 1:4:8(1cement:4sand:8 graded crushed stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth including carriage of materials in all leads and lifts.

Providing and laying cement concrete work 1:1½:3(1cement:1½sand: 3 crushed stone aggregate 20mm nominal size & curing complete excluding the cost of form work and reinforcement for reinforced concrete work in following items including carriage of material in all leads & lifts.

a) Foundation footing, bases of columns etc.

b) Column, pillars, posts and struts upto floor two level

c) Suspended floors, roofs, landing shelve and their supports balconies beams, girders bressumers and centilevers upto floor two level

d) Stair cases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level

e) Walls (any thickness but not less than 0.1m) including attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level)

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring blow supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in following item including carriage of material in all leads & lifts..

a) Foundation, footings basis of columns etc. and mass concrete.

b) flat surface such as soffits of suspended floors, roofs, landings and like floors etc. upto 200mm in thickness

c) Beams, cantilever, girders and lintels.

d) Columns, pillars, posts and struts Square, rectangular or polygonal in plan.

e) Edges of slabs and breaks in floors and walls: Under 20 cm. wide.

f) vertical surfaces such as wall any thickness.

Providing tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level including carriage of material in all leads & lifts

Providing and laying 20 cm.thick composit Ashlar stone masonrywith stone facing of chiseldressed stones one linedressed in cement mortar 1:6(1cement :6 sand) and concretebacking with cement concrete1:3:6 (1 cement: 3 sand: 6graded stone aggregate 20 mm.nominal size) on inner faceofwalls includingcentring,shuttering andpropping complete up to floor(EXTERIOR WALLS)

Ist class brick work using common burnt clay building bricks in supper structure above plinth upto floor two level in cement mortar 1:6(1cement:6sand) including carriage of materials in all leads & lifts.

1st class Half brick masonry in common burnt clay building bricks in :Cement Mortar 1:4 (1 Cement : 4 Sand) including carriage of materials in all leads & lifts.

Providing wood work of 1st class deodar wood in frames of doors,windows,clerestory,windows and other frames wrought, framed and fixed in position complete including carriage of materials in all leads & lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows i/c bright finished/black enamelled iron butt hings with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws 1st class deodar wood 40mm thick including carriage of material in all leads & lifts.

15mm cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level i/c arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 20mm in girth and finished even and smooth cement mortar 1:6 including carriage of material in all leads & lifts.

20mm Cement plaster in single coat on rough side of interior plastering upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:4 including carriage of material in all leads & lifts.

6mm Cement plaster in single coat on Ceiling upto floor two level ncluding arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:3 including carriage of material in all leads & lifts.

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete including carriage of material in all leads & lifts. (13540200) 30 mm thick.for Porch area.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 3 (1cement:3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete including carriage of material in all leads & lifts. 20mm.thick(for stairs and top of kitchen shelf)

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco/Kajaria/Johnson/AGL 600x600mm/600x1200mm/800mmx1200 manufactured size of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads & lifts. (13680000)(As per sample approved by Department)

Providing and laying ceremic tiles in flooring (20 x120mm.size) wooden textured and of required shade laid over 12 mm (1:3)

White glazed tiles 9 to 10 mm thick in dado of toilets,corridores etcflooring, treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1 cement :3sand) finished with flush pointing in white cement complete in all respect including carriage of material in all leads & lifts.(13210000).minimum size- 60 x 30cm

Providing and fixing Plaster of Paris( P.O.P.) false ceilings duly suspended from RCC slabs, using GI mains and cross sections, angle "L" runners with walls , frame grid size will be 45x60 cms, fastened to slab with 8mm dia fasteners, using wire mesh 5x5mm grid, 1mm dia wire fixed with screws on GI frame work, then applying 12 mm.finishing layer of POP, complete.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks complete in all respect including carriage of material in all leads & lifts (13710000). " NTC Make"

Polishing two coats with PU.(polyurethene) sirca/Asian make polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler complete in all respect including carriage of material in all leads & lifts (161060000).

Painting two coats(excluding primimg coat) on new wood and wood based surface with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matter,sand papering & stoping complete in all respect including carriage of material in all leads & lifts other than white enamel paint

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface complete in all respect including carriage of material in all leads & lifts (16105000).

Applying two coat for wood preservetive on previously treated wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter,sand papering and knotting complete in all respect including carriage of material in all leads & lifts (16036000)wood filler transparent)

item no. 16049000. Applying sprit and stains any colour on new wood and wood based surfaces for preparing shade for polish. Complete sirca/Asian make

Filling in plinth with sand under floors including watering ramming consolidating and dressing complete under flooring complete in all respect including carriage of material in all leads & lifts.

Providing and fixing 19mm thick water proof marrine ply shelves/box for cup board (Bhuttan make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.(1218000000).

Providing and fixing 19mm thick water proof commercial board in shutter of cup board (Bhuttan make)with butt joints & fixing with nails & screws etc complete in all respect including carriage of material in all leads & lifts.(1218000000).

Providing and fixing 6mm thick burl ply of standard quality and of approved shade & design wall lining i/c fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) complete in all respect including carriage of material in all leads & lifts.(1218400000).

Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on oards/ ply wood sheets with approved adhesive and nails etc complete in all respect including carriage of material in all leads & lifts.(1218200000). Mernno/equ.

Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting,fixing in position and applying a priming coat of red lead paint. In beams joists channels ,angles, tee ,flats MS Pipes- Hollow section with connecting plates or angle cleats as in main and cross beams,hip and jack rafters,purlins connected to common rafters and the like complete in all respect including carriage of material in all leads and lifts. (1504010000)

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees including carriage of material in all leads and lifts as required as per the direction of Engineer-in-charge (14550000).

Providing and fixing ridges or hips 60cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lifts as required as per the direction of Engineer in Charges (14560000).

Providing and fixing stair case/ balcony railing of stainless steel grade 304 in straight length with horizontal & vertical members of standard size/height with in all leads and lifts as per the direction of Engineer-In-Charge " Jindal section"

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete in all respect including carriage of material in all leads & lifts (16103000).

Providing under layer for plinth protection of 75mm thick (uncolsolidated) bed dry brick/stone aggregated 40mm nominal size will rammed and consolidated and grouted with fine sand including preparation of ground.

APainting two coasts (excluding priming coat) on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters complete including carriage of material in all leads & lifts Enamel white paint

Boulder filling dry hand packed under floors

Provision for structural design & drawing ( after ascertaining the safe bearing capacity of the soil ) , structural design and drawing of to be retted from PEC/NIIT

Providing & fixing 500 mm dia. SFRC man hole cover with frame and the weight of frame & cover should not be less than 100kg complete in all respect within all leads & lifts.

Providing and laying cement concrete 1:5:10 (1cement:5sand: 10graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in retaining wall/breast wall, HPWD/IPH specification in all leads and lifts.

P/F PVC Pipe 80 mm dia for weep holes 2.00 m c/c horizontally & 1.00 m c/c vertically.

Jungle clearance including uprooting of rank vegetation,grass,brush wood.trees and saplings of girth 30 cms.measured at a height of 1.00 mtr.above ground and removal of rubbish upto a distance of 20 mtr.outside the pherphery of area of the area cleared.

Hiring of earth cutting/excavating machineries ton be deployedfor earth cutting/excavating or filling making divertion bandh and channel wherver required including cost of fule oil lubricants and wages of operational staff any repair breakage duringoperation will be carried out by the owner at his own risk and cost including shifting of machinery one place to another place at required loction Actual working hours will beaccounted for thge payment and six hours per day working will requiered average minimum Cum(twenty cum) excavation in all kind of soil including loaing in tippers truck and diposal of excavated earth in all leads and lifts will have to be ensured one hour working.

Over Head Tank Construction of RCC in M-25 design mix over head sector storage tank of 40000 Ltrs. Capacity with 10.00 mtrs. Staging height from ground level to bottom of dome slab comprising of inlet, scour & over flow pipes as per details given below from ground level to tank including bends of required degrees,valves of required size conforming to relevant codes RCC Sprial 1.0 wide stair case/ MS stair case including MS pipe railing as per IS specification, steel ladder 45 cms. wide of usual height as per site requirement , SFRC manhole cover ( medium duty) of 500mm dia and weight of frame and cover should not be less than 110 kg. ventilator at top dome with minimum opening of 90x90cms. water level indicator including floats and measuring gauge, lightening conductor with earthing arrangement etc.The RCC over head reservoir shall include randering/plastering of the uneven expose surface, two coats of snowcem paint and any other component requuired for the completion of the job to the entire satisfaction of Engineer-in-Charge. The offers shall also include detail structural drawing/ design calcualtions to be approved by the competent authority based on the raft foundation by taking seismic forces in the design calculation expension joints as required at site. The offer shall also inclcude the cost of providing and fixing of Gms / MS pipes, and valves/ fittings complete including duck foot bends, puddle collars, expansion joints etc. connecting with rising main & distribution main with required length from the edge of foundation and any other components required for the completion of job upto the entire satisfaction of the Engineer-in-Charge. Dia of piping arrangement :- Inlet pipe = 80mm dia G.I. pipe Medium class Outlet pipe = 80mm dia G.I. pipe Medium class Scour pipe = Not less than 100mm dia G.I. pipe.

SANITARY/WATER SUPPLY ITEMS

Providing and fixing high pressure PVC.spigot and socket waste ventilating pipe of following daimeter i/c entire carriage of material within all leads and lifts.minimum 6 kg pressure

75mm dia

100mm dia

Providing and fixing PVC plain bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC door bend of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC collar/ socket of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Single equal brach of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

Providing and fixing PVC Single equal brach with eval access of following diameter i/c entire carriage of material within all leads and lifts.

75mm dia

100mm dia

1Providing and fixing PVC Floor traps 110x75mm i/c entire carriage of material within all leads and lifts.

Providing and fixing viterous China wash down water closet (European Type WC pan) with intergral “P”or”S” trap including jointing the trap with PVC soil pipe ,including cistern and seat cover) including entire carriage of material within all leads and lifts.

Single piece WC .300 mm wall distance Jaquar/Cera make.

Providing and fixing vitreous china wash basin with single hole mixture with CI or MS brackets painted white i/c cutting holes & making good the same but excluding fitting i/c entire carriage of material within all leads and lifts. Cera /Jaquar make Concord, 630x450mm size.

Providing and fixing vitreous china pedestal for wash basin complete recessed at the back for the reception of pipes and fitting i/c entire carriage of material within all leads and lifts.

Providing and fixing of MI union for wash basin 32mm dia i/c carriage of material within all leads and lifts.

Providing and fixing 32mm dia PVC waste pipes for wash basin i/c brass check nut i/c entire carriage of material within all leads and lifts.

Providing and fixing 900x600 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer including carriage of materials within all leads and lifts.

Providing and fixing C.P. brass towel rail complete with C.P.brass brackets fixed to wooden plugs with C.P. brass screws including carriage of materials within all leads and lifts 600 x 20mm. Jaquar make

Providing and fixing 600x120mm glass shelf i/c entire carriage of material within all leads and lifts.Jaquar make

Providing and fixing CP toilet paper holder common and VIP toilet i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass soap dish i/c entire carriage of material within all leads and lifts.

Providing and fixing Tooth brush and tumbler holder i/c entire carriage of material within all leads and lifts.

Providing and fixing CP brass shower 300mm dia and 60 cms long rod i/c entire carriage of material within all leads and lifts.

Providing and fixing brass bib tap long nose 15 mm dia (Heavy duty) i/c entire carriage of material within all leads and lifts.(Kitchen sink)

Providing and fixing CP brass wall mixture for bathing area.

Providing and fixing CP brass angle valve 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing CP concealed stop cock 15 mm dia without nut and pipe i/c entire carriage of material within all leads and lifts.

Providing and fixing single hole single lever wash basin mixture i/c entire carriage of material within all leads and lifts.Jaquar make

Providing and fixing PVC connection 15mm dia i/c entire carriage of material within all leads and lifts.

Providing and fixing 100mm dia, C.P. brass grating including carriage of material within all leads and lifts.

Providing and fixing Health facut (hand shower) fixed for WC seat i/c entire carriage of material within all leads and lifts.

Providing and fixing CP towel rack 600x250mm for VIP toilet i/c entire carriage of material within all leads and lifts.for vip rooms

Providing and fixing wall to ceiling and floor galvanised mild steel tubes light grade), tube fittings and clamps i/c making good wall ceiling & floor of following diameter i/c entire carriage of material within all leads and lifts

a) 15mm dia

b) 20mm dia (all toilets internal pipes and fittings)

c) 25mm (from tank to toilets etc)

Providing & fixing Brass full way ball/handel type wheel valve i/c entire carriage of material within all leads & lifts

a) 15mm dia

b) 20mm dia

c) 25mm dia

Providing and fixing 115x50x25cms size double bowl of approved make stainless steel kitchen sink i/c entire carriage of material within all leads and lifts

Providing and fixing 1000 ltrs. Double layer sintex make water storage reservoir with top lid and making connection complete in all respect including all leads and lefts.

Constructing manhole with RCC top slab in 1:2:4 mix ( 1 cement :2 sand:4 graded stone aggregate 20 mm nominal size) foundation concrete 1:4:8 ( 1cement:4sand :8graded stone aggregate 20 mm nominal size),inside plastering 15 mm thick with cement mortor 1:3 (1cement:3sand),finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size) finished smooth complete i/c curing &testing. (i) inside size 1200 x 900 x 1000 mm deep i/c c.i. cover with frame (m. duty) with single pattern 455 x 610 mm internal dimensions (total wt.of cover & frame to be not less than 38 kg) 23 cms. thick brick masonry walls using 2nd class brick in cm 1:3 (icement : 3 sand)

Providing & fixing stone ware gully trap grade 'A' complete with CI grating,B/Masonry chamber in cement mortor 1:5 & water tight CI cover with frame of 300 mm x 300 mm size (inside) .The wt.of cover to be not less than 4.53 Kg & frame to be not less 2.72 Kg. (Square mouth traps 100 x 100 mm size)

ELECTRICAL ITEMS

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required of Schneider /Havells/Anchor make Group-C

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. Schneider /Havells/Anchor make

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:-Schneider /Havells/Anchor make

4 modules(140mmx78mmx50mm)

6 modules(205mmx78mmx50mm)

8 modules (120mmx135mmx60mm)

12 modules (205mmx135mmx60mm)

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. Schneider /Havells/Anchor make

2x1.5 Sq. mm.

2x2.5 Sq. mm.

2x4.0 Sq. mm.

Wiring for circuit / sub-main with 4x6 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.6 Sq.mm. (4x6+2x6) HRFRLS/PVC insulated single core copper conductor cable. Schneider /Havells/Anchor make for earthing wire from MCB box to main pannel board.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulatedheat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing three phase wiring in main pannel board for busbar. Schneider /Havells/Anchor make

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Schneider /Havells/Anchor make

S.P. 5/ 6 Amps one way Modular switch.

5 pin, 5/ 6 Amps Modular socket outlet.

Bell push, Modular.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required. Schneider /Havells/Anchor make

S.P. 15/ 16 Amps one way Modular switch

6 pin,15/16 Amps Modular socket outlet.

Supplying and fixing TV. Socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required. Schneider /Havells/Anchor make

Supplying and fixing Telephone socket outlet, modular rating switch /socket in the existing switch box / cover plate including connections etc. as required. Schneider /Havells/Anchor make

Supplying and fixing ceiling rose on the existing junction box /wooden block including connections etc. as required. Schneider /Havells/Anchor make

Supplying and fixing of Double door-12 way single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnec- tions, phosphatized and powder painted, including earthing etc. as required. Schneider /Havells/Anchor make

Supplying and fixing 63 Amps. Cat-A rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required.Schneider /Havells/Anchor make

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 450mm & cross-sectional area(25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (530mmx450mmx 150mm) nominal with all accessories including connections, earthing the body etc. as required. Schneider /Havells/Anchor make

Providing and fixing TP&N switch disconnector fuse unit cubical type, 415/500 volts with 3 No. HBC/HRC fuses, in sheet steel enclosure including drilling holes on the board, connections, earthing the body etc. as required. 100 Amp. Category-A Schneider /Havells/Anchor make

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Single pole & neutral. Cat-B in the existing MCB DB complete with connections etc. as required:- Schneider /Havells/Anchor make

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35 mm x 35 mm x 6 mm thick duly welded complete with 2.80mm thick M.S. sheet fixed with hinges as open able front, complete with locking arrangement including painting and bonding to the existing earth as required:- Schneider /Havells/Anchor make

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of Double pole. Cat-B in the existing MCB DB complete with connections etc. as required:- Schneider /Havells/Anchor make

Supplying and fixing 40 Amps. Cat-B rating, four pole (three phase & neutral) 415 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. Schneider /Havells/Anchor make

Supplying and fixing 20 Amps, 240 volts, SPN industrial socket outlet, 2-pole & earth, metal enclosed plug top, sheet steel enclosure, suitable to accommodate a 20 Amp SPN-MCB/DP, on surface or in recess, with chained metal cover for the socket outlet, complete with connections, testing and commissioning etc. as required. Schneider /Havells/Anchor make

Providing and fixing TP&N switch disconnector fuse unit panel mounting, 415/500 volts with 3 No. HBC/HRC fuses, open execution, including drilling holes in the cubical, making connections, etc. as required. 200 Amp. Category-A Schneider /Havells/Anchor make

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for G.I. or copper plate earth electrode complete as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia. 300 mm long copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required.

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for vertical run) Schneider /Havells/Anchor make

Supplying and fixing copper tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as required ( for horizontal run) Schneider /Havells/Anchor make

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, rmoured/ XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the Armoured cable 4 sq. mm (twin core) for Yard lights. Schneider /Havells/Anchor make

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. 25 Liter capacity water heater (Cat-A) Havells/Bajaj make

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. Ceiling Fan 1400 mm sweep, Category-A Usha /Crompton make

Providing and installation of Exhaust Fan, Light duty, (Domestic) 225 mm sweep in the existing opening, including taking the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. Usha /Crompton make

Providing and fixing 1x36 watt-LED (Category-A) surface mounting fixture Syska/Havells make

Providing and fixing 6 watt. Recessed down lights round shape for falce ceilings complete. Syska/Havells make

Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required. Fixed type wall bracket 150 dia, single lamp.(Category-A) Havells/Schneider

Providing, Installation, testing and commissioning of prewired flourecent tube fitting 1x20W LED coplete in all respect. Schneider /Havells/Anchor make

Providing and fixing Mirror light 60 cms long 6 watt LED fixture. Schneider /Havells/Anchor make

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required. Schneider /Havells/Anchor make

Supplying and fixing 9 watt.LED bulbs. Schneider /Havells/Anchor make

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required.

Supplying and fixing of integral LED Post Top Lantern of following capacity, cast aluminium spigot, spun aluminium canopy, opal acrylic diffuser, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required. Gate post top lantern - CLED 26 watt. Schneider /Havells make

Supplying and fixing of integral LED BOUNDARY WALL lights fixed over GI pipe polls 1.20mtr ht. 50 mm dia,9 watt LED lamp with 200 mm dia globe made of acrylic sheet complete. Schneider /Havells make

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.Schneider /Havells make

Supplying and fixing 12 unit intercome exchange with phone sets and wiring complete. Schneider /Havells make

Supplying and fixing of split type air conditioner Voltas/LG/ Onida Whirlpool/Lloyd/ Samsang make having two stars features auto clean filter four wayu swing all copper pipes including making provision of draining of back moisture water through GI pipe 20mm dia electronic voltage stabilizer, cutting holes for conduits in wall, unit bracket set fixed on outer wall complete as required.

1.50 Tonne Capacity

2.00 Tonne Capacity

Supplying LED 32" Sony/Samsung make

Supplying Inverter With Dual Batteries Make Luminous

Supplying Water purifier with container 25 Ltr capacity (Aquaguard Model MAGNA HD RO+UV)

Supplying washing machine semi automatic doule container 8.5 Kg Capacity Make Lioyd

Supplying Microwave Oven 17 ltr Make IFB

Supplying Refrigerator 320 ltr capacity Make Haier

PARVEEN KATNA