REPAIR MAINT OF WOODEN AND STEEL FURNITURE OF SAILORS MD ACCN AT NAVY NAGAR UNDER GE NW NOFRA

Amount

Following nature of work to be executed at various locations at Navy Nagar, Nofra and area including BSO furniture yard under jurisdiction of GE(NW) NOFRA as directed by Engr-in-Charge / GE. Treatment to furniture shall be done carefully without disturbing the adjoining parts including tightening, screwing, welding, glueing, nailing wherever applicable.

Material and Labour for removal of old unsv wooden part of following furniture articles and supply and fix New seasoned teak wood part with exact dimensions complete all as specified and shown on drgs and directed by Engr-in-Charge.

CHAIR WRITING (FD-20(M),250,280)

Ditto as per Item Sl No. 2.00 here-in-before but for Front Legs of Chair writing

Ditto as per Item Sl No. 2.00 here-in-before but for rear Legs of Chair writing

Ditto as per Item Sl No. 2.00 here-in-before but for side rails of Chair writing

Ditto as per Item Sl No. 2.00 here-in-before but for front rails of Chair writing

Ditto as per Item Sl No. 2.00 here-in-before but for back rails of Chair writing

Ditto as per Item Sl No. 2.00 here-in-before but for back rest of Chair writing

Ditto as per Item Sl No. 2.00 here-in-before but for stiffeners of Chair writing

Ditto as per Item Sl No. 2.00 here-in-before but for arms of Chair writing

Material and Labour for Remove old unsv PVC shoes and supply and fix New PVC shoes of best quality with 1/2" screw to the bottom of legs of Chair writing.

Material and Labour for Removing Old unserviceable Cane from Chair writing and Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work ; in white colour complete all as specified and directed by Engr-in Charge.

Chair Dinning (FD/MAP-II/05)

Material and Labour for removal of old broken /unsv rear leg of chair dining, supply and fix new rear leg of size 890mmx30mmx55mm made of well seasoned hard wood (teak wood) all as shown on drg, complete all as specified and directed by Engr-in Charge.

Ditto as Sl No. 2.00 here-in-before but new front leg of size 460mmx55mm x 30mm.

Ditto as Sl No. 2.00 here-in-before but new side rail of size 430x30x65mm.

Ditto as Sl No. 2.00 here-in-before but new front rail of size 440mmx30mm x65mm.

Ditto as Sl No. 2.00 here-in-before but new back rail of size 405mmx30mm x65mm.

Ditto as Sl No. 2.00 here-in-before but new stiffeners of size 440mmx20mm x25mm

Material and Labour for Removal of old broken / unsv existing PVC seat and supply and fix new one having 4x10mm thick ribs moulded along with seat in single piece with 4mm seat thick with holes & screwed complete all as specified and directed by Engr-in Charge.

Material and Labour for preparation of old surfaces by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of melamine polishing using spray machine to obtain glossy finish complete all as specified and as directed by Engr-in-charge.

CHAIR EASY (FD-17(M),229)

Ditto as per Item Sl No. 2.00 here-in-before but for Front Legs of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for rear Legs of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for side rails of seat frame Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for front rail of seat frame of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for back rail of seat frame of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for side rails of back frame of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for top rail of back frame of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for bottom rail of back frame of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for stiffeners of Chair Easy

Ditto as per Item Sl No. 2.00 here-in-before but for arms of Chair Easy

Material and Labour for Remove old UNSV PVC shoes and supply and fix New PVC shoes of best quality with 1/2" screw to the bottom of legs of Chair easy complete all as specified and directed by Engr-in Charge.

Material and Labour for Removing Old unserviceable Cane From Chair easy seat and back and Re-canning seat and back with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work in white colour complete all as specified and directed by Engr-in Charge.

Chair Dining (FD-16(M),279,228)

Ditto as per item Sl No. 2.00 here-in-before but for Front Legs of Chair Dining

Ditto as per item Sl No. 2.00 here-in-before but for rear Legs of Chair Dining

Ditto as per Item Sl No. 2.00 here-in-before but for side rails of Chair Dining

Ditto as per Item Sl No. 2.00 here-in-before but for front rails of Chair Dining

Material and Labour for Removing Old unserviceable Cane from Chair dining and Re-canning with 2mm to 2.5mm wide plastic cane in Godrej pattern and 3.5mm to 4 mm plastic cane for Parameter work; in white colour complete all as Specified and directed by Engr-in Charge.

Chair Verandah (FD/MAP-II/06)

Material and Labour for removal old unsv PVC seat and back and Supply and Fix new PVC seat and back 4 mm thick having weight not less than 1.85 kg and having 90 x10 mm grooves (10 Nos) complete all as specified and directed by Engr-in Charge.

Supply and Fix new hard PVC shoe of superior quality with suitable screws to chair complete all as shown on drg and as directed by Engr-in-charge.

Material and Labour after necessary workmanship/repair as above; chairs shall be painted entirely with two coats of synthetic enamel paint( White in colour) after rusting/scraping to steel surfaces. Steel primer will be applied wherever necessary during workmanship.

CHAIR VERANDAH (FD-19(M),256,259)

Material and Labour for Re-canning seat & back of chair verandah with 1st class plastic cane 4mm wide, white colour in matt pattern and applying two coat of synthetic enamel paint white to complete chair before re-canning complete all as specified and directed by Engr-in Charge.

Material and labour for preparation of old painted surface of Chair Verandah by scraping, denting, derusting etc and applying two coat of synthetic enamel paint (White in colour) by spray painting to Chair Verandah complete all as specified and directed by Engr-in Charge.

Sofa Set 5 seater (1+3+1)with cushion, Ref FD-281/373

Material and Labour for removing unserviceable/old broken front legs of sofa single and three seater and supply and fix new Front legs of size 530mmx70mmx35mm complete all as shown on drg. and as directed .

Material and Labour for removing unserviceable/old broken rear legs of sofa single and three seater and supply and fix new rear legs of size 530mmx70mmx35mm complete all as shown on drg. and as directed .

Material and Labour for removing old broken / unserviceable arms of sofa single and three seater and supply and fix new arms of size 725mmx35mmx70mm complete all as shown on drg. and as directed .

Material and Labour for removing old broken / unserviceable ply of sofa single seater and supply and fix new plywood 8mm thick of size 560mmx530mm all as shown on drg. and as directed .

Material and Labour for removing old broken / unserviceable ply of sofa three seater and supply and fix new plywood 8mm thick of size 560mmx1590mm complete all as shown on drg. and as directed .

Material and Labour for Removal of old existing unsv foam cusion with tapestry cover of seat & back of sofa set 5 seater and S/F 100mm thick and 40 density PU foam cushion of size 530mmx560mm covered with best quality cora cloth and tapestry cloth Collection of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided.

Material and Labour for application of two coats of French polish to the whole furniture surface complete all as directed. Ref FD-258 as per drg

Sofa set 4 seater (Set of 4 single seats) with cushion, Ref FD-281/373

Material and Labour for removing old broken / unserviceable ply of sofa single seat and supply and fix new plywood 8mm thick of size 560mmx530mm complete all as shown on drg. and as directed .

Material and Labour for application of two coats of French polish to the whole furniture surface complete all as directed. Ref FD-281/373 as per drg

Material and Labour for Removal of old existing unsv foam cusion with tapestry cover of seat & back of sofa set 4 seater(set of 4 single seats each) and supply and fix 100mm thick and 40 density PU foam cushion of size 530mmx560mm covered with best quality cora cloth and tapestry cloth of Collection of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided.

Sofa Single Seater FD-258

Material and Labour for removing old broken / unserviceable front legs of sofa single seat and supply and fix new Front legs of size 480mmx66mmx25mm complete all as shown on drg and as directed.

Material and Labour for removing old broken / unserviceable rear legs of sofa single seat and supply and fix new rear legs of size 775mmx66mmx25mm all as shown on drg. and as directed .

Material and Labour for removing old broken / unserviceable ply of sofa single seat and supply and fix new plywood 12mm thick of size 560mmx535mm all as shown on drg. and as directed .

Material and Labour for removing old broken / unserviceable PVC shoe of sofa single seat and supply and fix new PVC buffer of 25mm dia all as shown on drg. and as directed .

Material and Labour for application of two coats of French polish to the entire wooden surface complete all as directed and specified in drg.

Material and Labour for Removal of old existing unsv foam cusion with tapestry cover of seat and back of sofa single seater and supply and fix 100mm thick and 40 density PU foam cushion of size 535mmx560mm covered with best quality cora cloth and tapestry cloth of Collection of approved shade by Engg-in-Charge/GE duly stitched with nylon zip on one side all as directed shall be provided.

Chair Dining (FD/E6/MAP/10)

Material and Labour for removing old broken / unserviceable front legs of chair dining and supply and fix new Front legs of size 325mmx40mmx30mm all as shown on drg. and as directed .

Material and Labour for removing old broken / unserviceable rear legs of chair dining and supply and fix new rear legs of size 325mmx40mmx30mm all as shown on drg. and as directed .

Material and Labour for removing old broken / unserviceable teak wood stopper of chair dining and supply and fix new teak wood stopper of size 20x50 all as shown on drg. and as directed .

Material and Labour for two coats french polish to the entire wooden surface of chair dinning complete all as directed.

Material and Labour for Removal of seat cushion with tapestry cloth from chair dining cushion & providing new seat of size 450mmx450mm PU foam cushion of 75 mm thick of 32 density covered with cora cloth covered with fabric of Collection of approved shade shall be fixed over 12 mm thick plywood BWR Gd complete all as specified and directed by Engr-in Charge.

Material and Labour for application of two coats of french polish (ready made) for the undermentined furnitures items F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and directed by Engineer-in-Charge. Note: Work will be executed at various Md Accn at Navy Nagar as directed.

Chair easy FD-17(M),FD-233

Chair dining FD-16,FD-203,FD-228,FD-279

Chair writing FD-20,FD-250,FD-280

Side board FD-26(M),FD241,FD-371

Bed Plywood Top FD-246,FD-21,FD-247

Book case FD-45,FD-237

Table Peg FD-384

Sofa single seater FD-258,FD-281,FD-373

Sofa 5 seater FD-258,FD-281,FD-373

Sofa 4 seater FD-258,FD-281,FD-373

Teapoy FD-232,FD-278,FD-34,FD-382

Table dining 6 pers FD-30,FD-239,FD-273

Table bed side FD-28,FD-248

Table Centre FD-235,FD-274,FD-29

Bed Hard Wooden with Plytop (FD-246,247)

Material and Labour for removing old broken / unserviceable Plywood top of Bed Hard and supply and fix new ply top of 12 mm thick of size 1860mmx860mm BWR Grade as per IS-303 approved specification of with fixing in position all as shown on drg with suitable size screws & cup washers complete all as specified and shown on drg and directed by Engr-in-Charge.

Material and Labour for removing old broken / unserviceable complete Head board of Bed Hard and supply and fix new Head board of size 900mmx660mm complete of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. All wood incarporated in Head board shall be well seasoned hard wood (Teak).Colour/ Shade of Vineer sheet to be incarporated in Head board shall be as directed by Engg-in-Charge /GE. All wood surfaces exposed to view shall be two coat of french polish of approved shade by Engr-in-Charge/GE.

Material and Labour for removing old broken / unserviceable complete foot board of Bed Hard and supply and fix new foot board of size 900mmx500mm complete of existing size, shape complete all as specified and shown on drg and directed by Engineer-in-Charge. All wood incarporated in foot board shall be well seasoned hard wood (Teak).Colour/ Shade of Vineer sheet to be incarporated in foot board shall be as directed by Engg-in-Charge /GE. All wood surfaces exposed to view shall be two coats of melamine polished of approved shade by Engr-in-Charge/GE.

Material and Labour for removing old broken / unserviceable Long rail of Bed Hard and supply and fix new Long rail of size 1980mmx35mmx90mm made of teak wood of existing size, shape complete all as specified and shown on drg . All wood surfaces exposed to view shall be two coats of melamine polished of approved shade by Engr-in-Charge/GE.

Material and Labour for removing old broken / unserviceable Support stiffners of Bed Hard and supply and fix new Supporting stiffeners of size 900mmx40mmx 60mm made of hard wood teak of existing size, shape complete all as specified and shown on drg and directed by Engr-in-Charge.

Material and Labour for removing old broken / unserviceable veneer and teak wood beading of head board and supply and fix 6mm thick new veneer sheet of size 780mmx540mm of approved shade and 4 mm teak wood beading alround the head board of the bed plywood top complete all as specified and directed by Engr-in- Charge.

Material and Labour for removing old broken / unserviceable veneer and teak wood beading of foot board and supply and fix 6mm thick new veneer sheet of size 780mmx180mm of approved shade of and 4 mm teak wood beading alround the foot board of the bed plywood top complete all as specified and directed by Engr-in- Charge.

Material and Labour for removing old broken / unserviceable MS bracket of Bed Hard and supply and fix new MS bracket of size150mmx35mmx5mm thick "L"shaped duly treated with black paint complete all as specified and shown on drg and directed by Engr-in-Charge.

Material and Labour for preparation of wood surfaces of Bed Hard by complete removal of existing treatment using grinding machine including filling of cavities by putty,filler,sealer and applying two coats of french polish to obtain glossy finish complete all as specified and as directed by Engr-in-charge.

Table Centre FD-29/235/274

Removing old unserviceable Top of Table Centre and supply and fix new top of size 900mmx450mm made of 18mm thick plywood BWR Gde covered with laminated sheet of approved shade with 4mm thick teakwood bidding of semi round shape all round the top of table complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of Table Centre and supply and fix well seasoned teak wood new long rail of size 20mmx50mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of Table Centre and supply and fix well seasoned teak wood new short rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable legs of Table Centre and supply and fix well seasoned teak wood new leg of size 60mmx30mmx400mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable bottom rail of Table centre and supply and fix well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable stiffner of Table centre and supply and fix well seasoned teak wood new stiffener of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Supply and Fix new teak wood Bracket of size 75mm x 75mm x 25mm for Table dining complete all as show on drg and as directed be Engr-in- charge.

Removing old unserviceable PVC rings of Table Centre and supply and fix new PVC rings of size 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

Material and Labour for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Centre complete all as specified and directed by Engineer-in-Charge .

Table Peg FD 25/230/277/384/248

Removing old unserviceable Top of Table Peg and supply and fix new top complete of size 300mmx450mm made of 18mm thick plywood covered with laminate sheet of approved shade with 4mm thick teakwood bidding of semi round shape all round the top of table complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of Table Peg and supply and fix well seasoned teak wood new long rail of size 20mmx40mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of Table Peg and supply and fix well seasoned teak wood new short rail of size 20mmx40mmx300mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable leg of Table Peg and supply and fix well seasoned teak wood new leg of size 30mmx50mmx380mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable bottom rail of Table centre and supply and fix well seasoned teak wood new bottom rail of size 20mmx40mmx300mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Supply and Fix new teak wood Bracket of size 75mm x 75mm x 25mm for Table peg complete all as shown on drg and as directed by Engr-in- charge.

Removing old unserviceable PVC rings of Table Peg and supply and fix new PVC rings of 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

Material and Labour for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Peg complete all as specified and directed by Engineer-in-Charge

Teapoy FD-34/232/278/382

Removing old unserviceable Top of Teapoy and supply and fix new top complete of size600mmx450mm made of 18mm thick plywood covered with laminate sheet of approved shade of with 4mm thick teakwood bidding of semi round shape all round the top of table complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of Teapoy and supply and fix well seasoned teak wood new long rail of size 20mmx50mmx600mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of Teapoy and supply and fix well seasoned teak wood new short rail of size 20mmx50mm450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable legs of Teapoy and supply and fix well seasoned teak wood new leg of size 60mmx30mm540mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable bottom rail of Teapoy and supply and fix well seasoned teak wood new bottom rail of size 20mmx50mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Supply and Fix new teak wood Bracket of size 75mm x 75mm x 25mm for Teapoy complete all as show on drg and as directed be Engr-in- charge.

Removing old unserviceable PVC rings of Teapoy and supply and fix new PVC rings of 20mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

Material and Labour for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Teapoy complete all as specified and directed by Engineer-in-Charge

Table Dining 4 pers (FD/MAP-II/03)

Removing old unserviceable Top of Table Dining 4 pers and supply and fix new top complete of size 1200mmx900mm made of 18mm thick plywood BWR Gde covered with laminate sheet of approved shade with 4mm thick teakwood bidding of semi round shape all round the top of table. Complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable long rail ofTable Dining 4 pers and supply and fix well seasoned teak wood new long rail of size 45mmx90mmx1200mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable short rail ofTable Dining 4 pers and supply and fix well seasoned teak wood new short rail of size 45mmx90mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable legs of Table Dining 4 pers and supply and fix well seasoned teak wood new leg of size 90mmx45mmx750mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC rings ofTable Dining 4 pers' and supply and fix new PVC rings of size 25mm dia best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable wooden brackets of Table Dining 4 pers and supply and fix well seasoned teak wood new brackets of 100mmx100mmx35mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable wooden stiffner of Table Dining 4 pers and supply and fix well seasoned teak wood new stiffener of 90mmx25mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Material and Labour for 2 coats of French polish over a coat of wood primer to new part and 01 coat of french polish of approved shade to entire surface complete to Table Dining 3'x3' complete all as specified and directed by Engineer-in-Charge.

Table Dining 6 Pers FD/Map/II/03 FD-30/239/273

Removing old unserviceable Top of Table Dining 6 Pers and supply and fix new top complete of size 1500mm(L) x 900mm (W) suitable for table dinging 6 pers shall be made of 18mm thick plywood covered with laminate sheet of approved shade with 4mm thick teakwood bidding of semi round shape all round the top of table. Complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top long rail of Table Dining 6 Pers and supply and fix well seasoned teak wood new long rail of size 25mm x 100mm x 1500mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable top short rail of Table Dining 6 Pers and supply and fix well seasoned teak wood new short rail of size 25mmx100mmx900mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable legs of Table Dining 6 Pers and supply and fix well seasoned teak wood new leg of size 75mmx40mmx760mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable wooden brackets of Table Dining 6 Pers and supply and fix new well seasoned teak wood brackets of size 50mm x 50mm x 25mm complete all as specified and shown on drg and directed by Engineer-in-Charge.

Removing old unserviceable PVC rings of Table Dining 6 Pers and supply and fix new PVC rings of size 25mm dia of best quality fixed with screw complete all as specified and shown on drg and directed by Engineer-in-Charge.

Material and Labour for 2 coats of French polish over a coat of wood primer to new part and 01 coat of melamine polish of approved shade to entire wood surface complete to Table Dining 6/8 Pers complete all as specified and directed by Engineer-in-Charge.

Book Case Drg No FD- 237

Removing of old u/s top from book Case and supply and fix new top of size 1200 mmx 300mm made out of 18mm thick ply BWR Gde complete all as specified and shown in drg. Ref Drg No FD-237.

Taking down old & u/s shutters from book Case and supply and fix new shutters of size of 380mmx622mm made out of 18mm thick ply wood BWR Gde with fixing of flat teakwood beading all around the shutter complete all as specified & shown in drg and directed by Engg-in Charge.Ref Drg No FD-237.

Taking down old & u/s upper shelf from book Case and supply and fix new upper shelf of size 820mmx 205mm made out of 18mm thick plywood BWR Grde with teak wood beading alround the shelf ; top portion of shelf shall be covered with 1mm thick veneer sheet of approved shade complete all as specified & shown in drg and directed by Engg-in Charge.Ref Drg No FD-237.

Removing old unsv/ broken hinges from shutter and supply and fix new piano type pino continuous hinges of size 20-25mm both Door shutter complete all as specified & shown in drg and directed by Engg-in Charge.Ref Drg No FD-237.

Removing old unsv/ broken knobs from door shutter and supply and fix new knobs of make: Hettich (model 9197000, 45mm dia) or equvilant make available from list of manufacturer's as per sample approved by Engg-in-Charge/ GE complete all as specified & shown in drg and directed by Engg-in Charge.Ref Drg No FD-237

Remove old unsv plywood back from Book case & supply and fix new back of 6mm thick ply wood BWR Gde size 1200mmx 660mm. Rest all as specified and shown on drg.Ref Drg No FD-237.

Table dressing ladies Fd-251

Removing old unserviceable Looking mirror of Table Dressing Ladies and supply and fix new Looking mirror of size 1250mmx 366mm fixed with teak wood front of 25mmx19mm frame alround and back frame 45mmx40mm alround complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-251.

Removing of unserviceable plywood back of mirror frame of table dressing ladies and supply and fix and new back made up of 6mm thick plywood BWR Gde of to table dressing ladies all directed and specified and shown on drawing. FD-251

Supply and Fix 4mm vineer sheet of existing shape, size to Top, sides, front of drawer of table writing all as directed by Engg-in- Charge. FD-251.

Material and Labour for 02 coats of French polishing of approved shade to to entire surface of Table Dressing Ladies complete all as specified and directed by Engineer-in-Charge. Ref FD-251

Table Dressing Ladies FD/MAP-II/07

Removing old unserviceable SIDES of base unit of Table dressing ladies and supply and fix new side of size 500mmx380mm made out of 18mm thick prelaminated MDF board of approved shade ISI marked complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD/MAP-II/07

Ditto as per item Sl No 22.01 here in before but for TOP of size 380mmx350mm to table dressing ladies .Ref Drg No.FD/MAP-II/07.

Ditto as per item Sl No 22.01 here in before but for BACK of size 550mmx1150mm to table dressing ladies .Ref Drg No.FD/MAP-II/07.

Removing old unserviceable BOTTOM of base unit of Table dressing ladies and supply and fix new bottom of size 350mmx380mm made out of 12mm thick plywood BWR Gde ISI marked of complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable telescopic channel of drawers of base unit of Table dressing ladies and supply and fix new one of size 12" wide complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable handles of drawers of base unit of Table dressing ladies and supply and fix new knobs Hettich(model 9197000, 45mm dia) or equvilant make available from list of manufacturer's complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable/broken Looking mirror of Table Dressing Ladies and supply and fix new Looking mirror of 5mm thickness of size 1250mmx450mm complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07.

Removing old unserviceable foam cusion of stool of Table dressing ladies and supply and fix new one of size 350mmx440mm made out of 75mm thick foam ISI marked covered with tapestry cloth approved shade /colour by Engg-in/Charge/GE over cora cloth of best quality duly stitched complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Removing old unserviceable Nylon castor wheel of stool of Table dressing ladies and supply and fix new 50mm dia pvc twin castor wheel complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref FD-FD/MAP-II/07

Table dressing Gents Fd/E6/MAP/16

Removing old unserviceable Looking mirror of Table Dressing Gents and supply and fix new 5.5mm thick Looking mirror of size 1200mmx600mm complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable wooden brackets of Table Dressing Gents and supply and fix new teak wood brackets of size 38mmx112mmx112mm complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable legs of Table Dressing Gents and supply and fix new teak wood legs of size 450mmx38mmx38mm complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Removing old unserviceable hinges of Table Dressing Gents and supply and fix new piano type continuous hinges of size 25mm wide complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16.

Almirah Large Steel FD-1031, FD/E6MAP/18,

Dismantling the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing item as per Drg:

3 way locking assembly system for almirah large steel suitable for almirah all as shown in drawing as approved by Engg-in-charge. Ref Drg No FD- 1031, FD/E6/MAP/18

Lock : New Lock should be of 65mm, 6 lever. Ref Drg No FD- 1031, FD/E6/MAP/18

CP handle 100mm long : Complete all as shown in drawing as approved by Engg-in-charge Ref Drg No FD- 1031, FD/E6/MAP/18

Legs : New legs must be made of 1mm thick MS sheet of size 485mm long x 100mm highx 100mm wide and to be joined with continuous gas welding as specified and shown in drg complete. Ref Drg No FD- 1031

Material and Labour for Preparation of old painted steel surface of the Almirah Large Steel including shelves by removing all dents filling with putty and spray painting with 2 coat synthetic enamel paint in grey colour approved shade/Colour by GE over external & internal surfaces of Almirah large steel complete, all as specified and directed by Engr-in-Charge. Ref Drg No FD- 1031, FD/E6MAP/18

Almirah Medium Steel FD-1032, FD-67/243,

Dismantling the following old unserviceable/damaged part and replace/fix the same with new part to match with the existing one:

3 way locking assembly system for almirah med steel suitable for almirah all as shown in drawing as approved by Engg-in-charge. Ref Drg No FD- 1032

Lock : New Lock should be of brass, 65mm, 6 lever as approved by GE.

CP handle 100mm long : Complete as shown in drg as approved by Engg-in-charge. Ref Drg No FD- 1032

Legs : New legs must be made of 1mm thick MS sheet of size 440mm long x 100mm highx 100mm wide and to be joined with continuous gas welding as specified and shown in drg complete. Ref Drg No FD- 1031

Material and Labour for Preparation of old painted steel surface of the Almirah Medium Steel including shelves by removing all dents filling with putty and spray painting with 2 coat synthetic enamel paint in grey colour approved shade/Colour by GE over external & internal surfaces of Almirah med steel complete, all as specified and directed by Engr-in-Charge

Chair Computer FD/E6/MAP/01

Material and Labour for removal of old unsv seat of Chair Computer in any position and supply and fix new seat of size 510mmx 470mmx 60mm made up of 12 mm thick ply wood BWR Grd, 60 mm thick, 32 density PU cushion covered with tapestry cloth approved shade by GE. Rest all as shown on drg and directed by Engineer-in-Charge. Ref Drg No. FD/E6/MAP/01

Ditto as per item No 26.01 here-in-before but back of Chair computer.

Material and Labour for removing old unserv Gas lifting assembly (fitted with bottom of the seat) and supply and fix new gas lift having chrome free cylinder tube shall be fixed in MS black powder coated outer central coloumn tube 38 mm dia and 2 mm thick.It shall have 100mm strock length and gas pressure of 300n force.

Material and Labour for removing old unserv castor wheel and supply and fix new PVC twin wheel castor 50 mm (Load Capacity of 80 Kg to 100 Kg)

Material and Labour for removal of old unserv pedestal assembly and supply & fixing of new pedestal assembly of injection moulded in black 30% glass filled nylon, 10.5mm dia forged bright zink plated MS castor pin is of press fitted into each prong for holding the castor (600mm pitch centre dia)as shown on drawing.

Material and Labour for removal of Handles and supply & fixing of new scrach proof and wheather resistant handle as shown in drawing and directed by Engg-in-charge.

Material and Labour for Painting of all steel surfaces by coating black paint of after rusting/ grinding the steel surfaces of computer chair amd laminited part of polishing of chair computer.

Shoe Rack Steel (FD/E6/MAD/02 ( R )

Material and Labour for Spot welding to broken joints/parts.

Removal of old broken Jali with frame and supply and fix new one made up of size 700mmx300mm of 20mm dia MS pipe with 03 mm dia rod of 700mm long and 300mm long duly welded complete as shown in drg and directed.

Removing existing unserviceble Hard rubber shoes and supply and fix with new one of size 25 to 30 mm dia all as shown in drg.

Material and Labour for Preparation of old painted steel surface of the Shoe rack by removing all dents filling with putty and spray painting with 2 coats of Black synthetic enamel paint complete, all as specified in drg and directed by Engr-in-Charge

TABLE BED SIDE FD/E6/MAP/15®

Removing of old u/s top from Table bed side and supply and fix new top of of size 450mm x 450mm made out of 18mm thick Prelaminated Particle Board of with teak wood beading alround the top complete all as specified and shown in drg. Ref Drg No Fd-FD/E6/MAP/15®.

Removing of old u/s sides from table bed side and supply and fix new sidesof size 450mm x 450mm made out of 18mm thick Prelaminated Particle Board of complete all as specified and shown in drg. Ref Drg No Fd-FD/E6/MAP/15®.

Removing old unsv/ broken handle from drawers and S/F new 50-60mm long stainless steel handle of Make: Hettich (Hettich 1161167) or equvilant make available from list of manufacturer's and as per sample approved by Engg-in-Charge/ GE complete all as specified & shown in drg. Ref Drg No Fd-FD/E6/MAP/15®.

Removing old & u/s bottom of drawers from Table bed side and S/F new bottom of drawers of 450mm x414mmsize made out of 6mm thick plywood BWR Gde ISI marked. All as specified & shown in drg and directed by Engg-in Charge.Ref Drg No Fd-FD/E6/MAP/15®.

Removing old & u/s front door Particle board of upper drawers from Table bed side and S/F new front door of upper drawer of size 414mmx 100mm made out of 18mm thick Prelaminated Particle Board with teak wood beading alround the board duly screwed with 02 L shaped stainless steel flat angle strip of size 25mmx25mmx 2mm ; 50mm long . All as specified & shown in drg and directed by Engg-in Charge.Ref Drg No FD/E6/MAP/15®.

Removing old unsv/ broken hard rubber toe from Table bed side and S/F new hard rubber toe 18 mm square shoes as per sample approved by Engg-in-Charge/ GE complete all as specified & shown in drg and directed by Engg-in Charge.Ref Drg No Fd-FD/E6/MAP/15®.

Material and Labour for Preparation of old painted steel surface of the Table Bed Side by removing all dents filling with putty and spray painting with 2 coats of Black synthetic enamel paint complete, all as specified in drg and directed by Engr-in-Charge

Table Computer FD/E6/MAP/03

Removing of unserviceable top and supply and fixing new top of size 560mm x 900mm shall be made up of 18mm thick ply wood BWR Gde with both side laminated with laminate sheet of approved colour /Shade as directed by GE/Engg-in-Charge with polished 4 mm thick teak wood beading all round the top.

Material and Labour for removal of old broken Telescopic channels of drawer and supply and fix new one of 14-18 inch shall be provided.Rest all as shown in drg.

Removing unserviceable lock of drawer and supply and fixing new lock suitable for drawer with duplicate key all as shown on drawing and directed by Engg-in-Charge.

Material and Labour for Painting of all steel surfaces by coating black paint of after rusting/ grinding the steel surfaces of computer table.

Table 900mmx600mm x 760mm steel FD-1007, FD 1008

Removal of unsv / broken Top of the table and supply and fix New top of size 900mmx 600mm made up of 18mm thick plywood BWR Gde and laminate sheet of approved shade with 4mm with teak wood bidding with semi round shape all round the top of table.

Material and Labour for Spot welding to broken steel parts of Table 3x2.

Removing existing unserviceble rubber shoes and replace with new 25mm dia hard rubber shoe for legs of as approved by Engg-in-Charge.

Material and Labour for Preparation of old painted steel surface of the Teapoy Verandah by removing all dents filling with putty and spray painting with 2 coats of white synthetic enamel paint complete, all as specified and directed by Engr-in-Charge

Table 900mmx 900mm steel FD-1009

Removal of unsv / broken Top of the table and supply and fix New top of size 900mmx 900mm made up of 18mm thick plywood BWR Gde and laminate sheet of approved shade with 4mm with teak wood bidding with semi round shape all round the top of table.

Material and Labour for Spot welding to broken steel parts of Table 3x3.

Removing existing unserviceble rubber shoes and replace with new 25mm dia hard rubber shoe for legs as approved by Engg-in-Charge.

Material and Labour for Preparation of old painted steel surface of the table 3x3 by removing all dents filling with putty and spray painting with 2 coats of white synthetic enamel paint complete, all as specified and directed by Engr-in-Charge

Bed Hard Steel (MAP) (FD/E6/MAP/08(R))

Material and Labour for removing old broken / unserviceable Prelaminated particle board of head board of Bed Hard and supply and fix new 18mm thick plywood of size 634mm x196mm BWR Grade as per IS-303 approved specification covered both side with laminate sheet of approved shade by Engg-in-Charge with 18mmx4mm thick teak wood beading all round the edges of ply complete. Rest all as specified and shown on drg and directed by Engr-in-Charge.

Material and Labour for removing old broken / unserviceable Prelaminated particle board of foot board of Bed Hard and supply and fix new 18mm thick plywood of size 638mm x314mm BWR Grade as per IS-303 approved specification covered both side with laminate sheet approved shade by Engg-in-Charge with18mmx 4mm thick teakwood beading all round the edges of ply complete. Rest all as specified and shown on drg and directed by Engr-in-Charge.

Material and Labour for removing old broken / unserviceable Ply top of Bed Hard steel and supply and fix new ply top of 12 mm thick of size 1974mmx850mm BWR Grade as per IS-303 approved specification of with fixing in position all as shown on drg with suitable size screws & cup washers complete all as specified and shown on drg and directed by Engr-in-Charge.

Material and Labour for preparation of old steel surface of bed hard by scraping /rusting /denting and applying 2 coats of synthetic enamel paint of colour black in shade of with spary Gun machine complete as directed by Engr-in-charge.

VARAROHA BUILDERS

B P ENTERPRISES

GAJANAN SALES CORPORATION

Mahesh Traders

Unitech Enterprises