Provn of interlocking tiles of 422 Fd Hosp and Provn of certain sanctioned minor works in the area of AGE E/M under GE (West) Delhi Cantt-10

Surface excavation n exc 30cm deep and averaging 15cm deep including getting out in hard/dense soil and removing debrish beyond MOD land complete all as specified and directed.

M & L for hard core of broken stone of gauge not exc. 63 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken stone or boulders complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified and as directed.

M&L for Pre-polished 80mm thick precast PCC glossy interlocking blocks of grade M-35 single layer monolithic high density manufactured by electro vibro hydraulically operated block making machine confirming to IS-15658 : 2006 coloured tile to make a pattern as directed, laid over and including 30mm thick sand cushion complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates, leveling course of floor, kerbs/gola/haumching including weathering slightly rounded or chamfered and throating and complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as spd & directed.

Demolition of cement concrete (reinforced/unreinforced) any type n. exc. 15cm thickness (below or above ground level) all as spd & directed.

M&L for concealed point wiring with PVC FRLSH insulared multi stranded unsheathed cable 2.5 sqmm size with stranded copper conductor, 1100 volts grade conforming to IS:- 694 drawn in and including concealed PVC rigid conduits 20 mm dia incl cutting of chases for laying conduit making good the surfaces as per existing surfaces or as directed with concealed sunk in pressed steel terminal boxes of 1.6mm thick factory made and painted with stove enameled black paint covered with 3 mm thick plastic laminated sheet of required colour fixed with brass screws and cup washers incl with 2x2.5 Sqmm & 1x2.5 Sqmm cable for earth connection for 3 pin socket outlet 15 amps independent board complete all as specified and directed: - (Note:- Cost of chiseling cutting of existing surface and making goods to match with existing shall be deemed to be included in quoted rates colour code to be followed).complete all as specified and directed.

S & F water heater storage type Geyser vertical type with suitable size of fastner and inner tank material of superior glass lined tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braided pipe of size 15mmx600mm long with adopter for inlet and outlet water connection suitable for hot and cold water having adjustable knob for temperature control and inner tank should be glass lined coated, capacity 25 Ltrs, having heating element 2 KW and BEE 5 star rated, suitable for 230 volt, 50 Hz electric supply complete all as specified and directed .

S&F bib taps 15 mm fency type with crutch or butterfly handle, screwed down screwed for GI pipe.complete all as specified and directed.