Strengthening of COE for I.O.T Based Control Room Under (CAPEX / NABARD) at Main Campus Shalimar, SKUAST-K

Design, Supply, Installation, Testing and Commissioning of integrated 5-in-1 environmental sensor for polyhouse, complete in all respects, for simultaneous measurement of Air Temperature, Relative Humidity, CO₂ concentration, Light Intensity (LUX) and Atmospheric Pressure, with suitable measuring ranges and accuracy, industrial/agricultural-grade sensor assembly suitable for continuous operation under polyhouse environmental conditions, digital communication interface (RS485/Modbus RTU or equivalent), including mounting accessories, connectors, glands, termination accessories, complete cabling up to 15 metres from sensor to data logger/controller, installation, configuration, testing and commissioning, complete as required and as per OEM specifications.

Providing and supplying 40 mm dia rigid PVC pipe of approved make and quality, complete with all necessary PVC couplers, bends, elbows, joints, junctions, jointing materials, solvent cement and other required accessories/fittings, suitable for underground protection/routing of cables, complete in all respects as directed by the Engineer-in-Charge.

Earth work in excavation by manual means in trenches (6 pipes in one trench 600 mm wide & 450 mm Deep) for foundations, drains, pipes, cables etc. (not exceeding L'5 m in width) and for shafts, wells, cesspits and the like not exceeding IO sqm on plan, including dressing Of sides and ramming Of botton1S lift upto 1.5 m, including getting Out excavated earth and disposal Of surplus excavated earth as directed

Providing, supplying, installing, testing and commissioning of heavy-duty rain gun FC (19.5-34.5M WRD) 1.37-7.17LPS @2-6BAR OP including irrigation assembly, of approved/imported make, complete with heavy-duty service saddle suitable for the main irrigation pipeline, GI threaded outlet, GI riser pipe of upto 1 metre height, GI nipple, threaded adapters, reducer/coupler, union, bends, clamps, washers, gaskets and all other necessary pipe fittings and accessories required for connection to the mainline, including all jointing materials, supports and fixtures, complete in all respects to make the rain-gun irrigation system fully functional and ready for operation, as directed by the Engineer-in-Charge.

Providing, developing, configuring, integrating, testing and commissioning of customised software for complete integration of existing Netafim irrigation/fertigation systems/controllers along with all associated field sensors and connected devices into a common central monitoring and control platform, including communication/interface/API/protocol integration as supported by OEM, configuration and mapping of all Netafim controllers, irrigation and fertigation equipment, valves, pumps, filters, dosing/fertilizer units and all connected sensors; acquisition, processing and display of all available real-time parameters including soil, environmental, irrigation, flow, pressure, level, temperature, humidity, EC, pH and other available sensor data; device-wise and sensor-wise dashboards, equipment status, operating parameters, alarms and fault indications, historical data logging, trend graphs, reports, data storage, user authentication and access control, remote monitoring/control wherever supported, complete configuration, testing, commissioning, documentation and training, including all software, /API integration charges and incidental services necessary for seamless operation, complete in all respects as per OEM specifications and directions of Engineer-in-Charge.

Providing, supplying, laying and installation of inline drip irrigation laterals 16MM 2/4 LPH 30/40CM CL2-PC, manufactured from high-quality UV-stabilized LDPE material, with factory-fitted pressure-compensating/non-pressure-compensating inline emitters at specified spacing, suitable for agricultural/polyhouse irrigation, complete with all other accessories required for proper connection and operation, including laying, alignment, fixing, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.

Providing, supplying and installing 16 mm dia mini lateral valve/cock, made of high-strength UV-stabilized engineering plastic, suitable for drip irrigation laterals, with barbed ends for secure connection to 16 mm lateral pipe, providing positive ON/OFF flow control, complete with necessary grommet/take-off, connectors, sealing components and other accessories, including fixing, connection, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge

Providing, supplying, installing, testing and commissioning of industrial-grade EC (Electrical Conductivity) and pH sensors/probes suitable for installation in polyhouse fertigation/nutrient solution tanks, comprising corrosion-resistant and waterproof sensor probes, suitable sensor holders/immersion fittings, connecting cables, connectors, calibration accessories and necessary mounting hardware, compatible with the fertigation/automation controller for continuous monitoring of nutrient solution EC and pH values, including installation, calibration, wiring, connection, testing and commissioning, complete in all respects as directed by the Engineer-in-Charge.

100 mm nominal Outer dia pipes.