Construction of 08 rooms double storey building at Govt. High School Roukhla Zone Malhar Newly Upgraded Under Capex Budget 2021-22 State Sector

Amount

Earthwork in bulk excavation by manual means over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth as directed by Engineer-in-charge, including all leads and lift. a) All Kind of soil.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables, etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m including getting out excavated earth as directed by Engineer-in-charge, including all leads and lift. a) All Kind of soil.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:5:10 (1 cement:5 coarse sand:10 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centring ,shuttering, finishing and reinforcement. All work upto plinth level with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutment, pillars, posts, struts, buttresses, strings or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillet etc. upto floor V level, including curing but excluding the cost of centring ,shuttering and finishing with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Brick work with common burnt clay F.P.S. (non modular) cement mortar 1:4 (1 cement:4 fine sand) bricks of class designation 75 in foundation and plinth in (including all leads and lifts carriages of material by MT/ HL)

Providing and laying damp proof course 50mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand:4 graded stone agg. 12.5mm nominal size and curing complete. (including all leads and lifts carriages of material by MT/ HL)

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 (1 cement:6 coarse sand) (including all leads and lifts carriages of material by MT/ HL)

Extra for brick work with common burnt clay bricks / cement concrete bricks in superstructure above plinth level upto floor five level (including all leads and lifts carriages of material by MT/ HL)

Half brick masonry with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement:4 coarse sand) (including all leads and lifts carriages of material by MT/ HL)

Extra for half brick masonry in superstructure above plinth level upto floor V level.

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15˚, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/ HL)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

Centring and shuttering including strutting, propping etc.and removal of form work for :

a) Foundation, footings, bases of columns etc. for mass concrete.

b) Suspended floors, roofs, landings, balconies and access platforms.

c) Lintel, beams, plinth beams, girders, bressumers and cantilevers.

d) Edges of slabs and breaks in floors and walls under 20cm wide.

e) Columns, Pillars, Piers, Abutments, Posts and struts.

f) Stairs (excluding landings) except spiral staircases.

g) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

h) Weather shade, Chajjas, corbels etc. including edges.

Filling available earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and lift upto 1.50 m.

Extra for additional height in centring, shuttering wherever required with adequate bracing, propping etc. including cost of de-shuttering and decentring at all levels, over a height of3.5m, for every additional height of 1 metre or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) (including all leads and lifts carriages of material by MT/ HL)

6mm cement plaster to ceiling of mix. 1:3 (1 cement:3 fine sand) (including all leads and lifts carriages of material by MT/ HL)

15mm cement plaster on the rough side of single or half brick wall of mix. 1:6 (1 cement: 6 fine sand) (including all leads and lifts carriages of material by MT/ HL)

12mm cement plaster of mix. 1:6 (1 cement:6 fine sand) (including all leads and lifts carriages of material by MT/ HL)

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer, (having brand logo with IS:3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS:13592 Type a including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. a) Single socketed pipes. 110mm diameter.

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticisd-Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5392w leaving 10mm gap for thermal expansion

a) Coupler 110mm

b) Single Tee with door 110x110x110mm

c) Bend 87.5* 110mm.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). a) 2nd class deodar wood.

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screw, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:Butt hinges and necessary screws shall be paid separately). a) Second class deodar wood.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete (including all leads and lifts carriages of material by MT/ HL)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. a) Second class teak wood.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4mm in both directions with wire of dia. 0.63mm for doors, windows, and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw as per direction of Engineer-in-charge. a) Second class deodar wood.

Providing and fixing paneling or panelling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for paneled or paneled and glazed shutters 25mm to 40mm thick. a) Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS:3087 marked.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. a) Fixed to openings/wooden frames with rawl plugs screws etc.

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screw etc. complete

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour and shade with necessary screws etc. complete

Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screw etc. complete.

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS:1868 transparent or dyed to required colour or shade with necessary screws etc. complete: a) Twin rubber stopper.

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. a) M.S.Tube.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. a) 2mm thick.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new steel work

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron / steel works.

Painting on G.S.sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on old work (one or more coats).

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Finishing wall premium acrylic smooth exterior paint with silicone additives of required shade on New work (two or more coats applied @ 1.43 liter/ 10 sqm over and including priming coat of water exterior paint applied @ 2.20 kg./ 10 sqm.).

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate) finished with a floating of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. a) 50mm thick with 20mm nominal size stone aggregate (including all leads and lifts carriages of material by MT/ HL)

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Ujh for an average lead of 5.00 Km. by M.T. & 5.00 km. by H.L. b) Stone aggregate 40mm nominal size & above from Ujh for an average lead of 5.00 Km. by M.T. & 6.00 km. by H.L. c) Stone aggregate (Crusher bajree) below 20mm nominal size from Ujh for an average lead of 5.00 Km. by M.T. & 5.00 km. by H.L. d) Bricks from Hiranagar for an av. lead of 55.00 km. by M.T. & 5.00 km. by H.L.

RAJ KUMAR

Rajeshwar singh

Raman Kuma

Tilak Raj Sharma

BRIJ MOHAN