Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.1 LAccepted-AOC GC ROAD ABDUL LATIF ROAD PO TITAGARH KOLKATA 700119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.7 L+₹2.9 L (6.61%)Rejected-Finance G C ROAD ABDUL LATIF ROAD PO TITAGARH P S RAHARA KOLKATA 700 119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L2 | Rejected-Finance Being higher bid value | |
| 3 | L3₹50.6 L+₹6.8 L (15.5%)Rejected-Finance 1622 KASTA DANGA ROAD KOLKATA 700061 WB | KOLKATA | WEST BENGAL | 700061 | L3 | Rejected-Finance Being higher bid value | |
| 4 | L4₹54.1 L+₹10.3 L (23.5%)Rejected-Finance 15 1 1F MAYUR BHANJ ROAD POLICE STATION EKBALPORE KOLKATA 700023 | KOLKATA | KOLKATA | WEST BENGAL | 700023 | L4 | Rejected-Finance Being higher bid value | |
| 5 | L5₹54.2 L+₹10.3 L (23.5%)Rejected-Finance | L5 | Rejected-Finance Being higher bid value |
Tender Value
₹42.3 L
EMD Value
₹84,500
Closing Date
9 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ALIPORE KOLKATA
NO 1 NATIONAL LIBRARY AVENUE, ALIPORE, KOLKATA 700027
ADDN/ALTERATION OF ROOM NO-103, 105, 107 AND ATTACHED TOILET OF ADMIN BLOCK, PROVN OF CHEQUERED TILES AROUND BLDG NO P-08, PROVN OF CHILDREN PLAY ZONE WITH 07 FEET HIGH RAILING AND COVERED PATHWAY FROM PEADEATRIC WARD TO GAZIBO AND PROVN OF PEX PIPE
2023_MES_609720_1
GE/ALP (8229B) KOLKATA OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE ALIPORE KOLKATA
Class D and category a (i)
9 documents required · 9 mandatory
₹500
GARRSION ENGINEER ALIPORE
₹84,500
Yes
GE ALIPORE KOLKATA
10 Oct 2023
19 Jul 2023
16 Aug 2023
19 Jul 2023
9 Aug 2023
2 Aug 2023
19 Jul 2023 - 26 Jul 2023
27 Jul 2023
Amount
Taking down cement plaster on brick or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
M&L for 15mm thick cement plaster with CM (1:6) on other than fare face of brick wall finsh even and smooth without using extra cement complete all as directed.
M&L for 20mm thick (in two layer) plastering on fair face of Brick surface with CM (1:4) mixed with WPC finish surface even and smooth with out using extra cement complete all as specified and directed.
Supply only Intregal water proofing compound.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L for coloured, glazed ceramic tiles size 450x300x 6-7mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid completed all as specified and directed.
M&L for 10mm thick rendering of brick wall and concrete surfaces in CM (1:4) surface finished even and fair complete all as specified and directed.
M&L non-skid joint free ceramic (coloured) tiles 7-8mm thick area of each tiles exeeding 0.06sqm but n.exceeding 0.11 sqm in toilet/bath floor etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified & as directed.Note: Screed bed shall be measured and paid separately
M&L 15mm thick cement slurry bedding layer on floor finishes in CM 1:4 complete all as spd and directed.
M&L for Granite (of any type) tiles 18 mm to 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete
M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes
Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walling built in cement mortar 1:4 complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
S & F in repairs Aluminium body door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851-1000 mm in width & weight between 61 to 80 Kg.
Demolation of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed
M&L for RCC(Nominal Mix) in type-B1 1:2:4 (20mm graded aggregate) pre cast slabs supported on walls for cup board and Kitchen slabs,manhole covers,drains.
M&L for mild steel TMT bars 10MM dia and over, cut to length, bent to shape required including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming complete and all as specified and directed.
S&F 20 mm bore (Outer dia) CPVC pipes of SDR 11and plain CPVC SDR 11 fitting fixed on wall or floor (concealed ), ceiling or laying in floors complete all as directed
S&F 50 mm bore (Outer dia) UPVC pipes of SCH-40 and plain UPVC SDR 11 fitting fixed on wall or floor, ceiling or laying in floors complete all as directed
S&F 20 mm bore brass elbow/Tee/MTa /Fta CPVC complete all as directed.
S&F in repairs 15mm bore CP angular valve fancy type,with crutch handle, screwed for iron pipe or for brass ferrule and fixed of following size complete all as specified and directed.
S & F in repairs 15 mm Dia CP Bib taps,fancy type with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed .
S&F in repairs 15 mm bore CP pillar taps, with capstan heads, chromium plated, Fancy type screwed down for pipe, high pressure ,complete all as specified and directed.
S&F in repair vitreous china counter wash hand basin(pedestal pattern), white, flat back, size 550mm x 400mm, exc chain and plug and porcelain stopper but including cutting for and pinning in ends of and including brackets, waste pipe & CP brass waste coupling of 32mm dia complete all as specified and directed.
S&F in repair CP Health faucet with all necessary fittings . Make : Prayag/Cera/Jaquar
S&F in repairs vitreous china squatting pan of “Orissa” pattern of size 580 mmx 440mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.
S&F in repairs vitreous China wash down water closet pan ( padestal pattern) incl PVC seat cover , (excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., complete complete all as specified.
S&F in repairs for Powder coated aluminium sliding windows for two track with powder coated aluminium standard beads/glazing clips ,locking arrangement etc and aluminium frame of size 64mmX25 mmX1.55mm and shutter of section 20mm X 20mm X1.55mm including (fixing of 4.8 mm thick glass) and taking down old steel windows with necessary all fittings complete all as per manufacturer's instructions and all as specified and as directed.
M&L for Two coat of synthetic enamelled paint on old decorated wooden surface exc 10cm width or girth including preparation complete all as specified and as directed upto 8 storey bldg.
M&L for L-shaped rubberised corner guard for sharp vertical edges of length 1000mm, width 100 x 100mm reflective type of thickness 10mm complete all as specified & as directed.
Complete removal of existing treatment by using electric sander machine or steel wire brushing to remove all dust and loose scale etc of wall surfaces & prepare to receive wall care putty complete all as specified & directed
M&L for 3mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. complete all as specified & as directed.
M&L for preparation old decorated walls & applying two coats of acrylic oil emulsion distemper complete all as specified and directed.
M&L for preparation of decorated Ceiling & applying two coats of acrylic oil emulsion distemper complete all as specified and directed.
M&L for preparation of newly plastered wall surface two coats of oil bound distemper over a coat of primer on complete all as specified and directed.
M&L for non skid, joint free, coloured ceramic tiles 6-7mm thick (Square/Rectunglar),Area of each tile exc 0.11 Sqm but not exc 0.18 Sqm. as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles laid with and including over 15mm thick screed bed in CM (1:4), area of each tiles shall be of following complete all as specified and directed.
M&L for coloured, glazed ceramic tiles size 450x300x 6-7mm thick, in dado/skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, laid with and including over10 mm thick rendering in CM (1:3) all as specified and directed.
M&L for 15mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and fair with out using extra cement including necessary scaffolding complete all as specified and directed.
Material & Labour for two coat acrylic distemper (white or coloured as per site reqmt) over one coat of priming chalk whiting on new or previously untreated plastered surfaces incl preparation of surface and incl necessary arrandement for working platform complete all as specified and directed. Note : No separate payment shall be made for colour of distemper where required or directed. Cost is included in unit rate.
M&L for one coat of acrylic distemper (white or coloured as per site reqmt) on old decorated surface of internal walls incl preparation and necessary arrandement for working platform complete all as specified and directed (upto 04 storey bldg). Note : No separate payment shall be made for colour of distemper where required or directed . Cost is included in unit rate.
S&F 10mm thick toughened glass as in hinged doors,partitions, automatic doors and similar work including cutting to shape,drilling holes required .
S&F for stainless structural steel 48.30 mm outside diameter and 4 mm thick tubular section including necessary fittings and fixtures complete all as specified and directed.
S&F for stainless structural steel 38 mm diameter tubular section including necessary fittings and fixtures by using sanddle clip clamp etc. complete all as specified and directed.
S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specfied and as directed.
Dismantling posts or struts (wood, steel or R.C.C.) any section embeded in concrete, including taking out embedded portion and making good disturbed ground complete all as specfied and as directed.
Taking down chowkhats or frame with shutter (without taking off shutters from the frame) exc 1.5 sqm n.exe 4 sqm each.
M & L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre and incl Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
Providing and fixing Gypsum Board 12mm thick in ceiling flat or slopping fixed in jointless finish with jointing compound and jointing tape fixed with screw as per manufacturers instructions with provn of light/electric fixtures complete all as directed complete all as specified and directed.
M&L for preparing new gypsum board ceiling, pillasters, cornices etc and applying one coat of 3 mm thick wall care putty with two coat acrylic distemper complete all as specified and as directed.
Material & Labour for Texture paint (white or coloured as per site reqmt) over 3mm thick wall care putty on wall including rubbing with sand paper to achieve a smooth surface & sharp straight edges etc. incl necessary arrandement for working platform complete all as specified and directed. Note : No separate payment shall be made for colour of distemper where required or directed by Engineer-in-Charge. Cost is included in unit rate.
S&F 10mm thick toughened glass as in hinged doors, automatic doors and similar work including cutting to shape,drilling holes required and all necessary fittings and fixtures complete all as specfied and as directed. .
Excavating in post holes (or similar holes) each n exc 0.50cu.m gettingout returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in soft/loose soil complete all as specified.
S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe 410 -W (Gde-E- 250) quality complete all as specified.
S & F flat iron (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
M & L for PCC 1:3:6 Type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete.
Supply only chain link MS galvanisd fencing, any size or type complete all as specified and as directed.
Excavation in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and getting out Hard/Dense Soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material (Soil/Soft Rock) exc. 1.5 Km and n exc 5 Km and depositing out side the MD land complete all as specified and directed.
M&L for PCC ( 1:4:8 ) Type D -2 using 40 mm graded stone aggregate as in foundation complete all as specified.
M&L for fly ash bricks old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and as directed .
M&L for preparation on new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer upto four storey high bldg complete all as specified and directed.
M&L for Providing cement concrete type B-1(1:2:4) (using 20 mm graded stone aggregate) as in benching concrete,coping ,hold fast etc complete all as specified and directed.
S&F for Framed work such as grills, gratings, steel gates etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
S&F Anodised powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators or aluminium frame for partition works etc with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F for Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S & F Plywood for door grade BWR, type BB, fixed with screws to timber frame work 12 mm thick incl all necessary fittings complete in all respect as specified and directed.
S&F 4.8 mm thick glass ordinary quality, frosted on one side fixed to aluminium frame work exc 0.5 Sq. m in each pane complete all as specified & as directed.
S&F aluminium 4 levers Mortice lock, vertical type, size 100 mm complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified .
S&F Hinges 125 mm, cast brass, with mild steel hinge pin, bright polished and fixed medium wheight , complete all as specified and directed.
M&L for applying 1mm thick birla wall care putty or equivalent (each layer n.exc 1mm thick) on new plastered surfaces etc incl necessary arrandement for working platform complete all as specified and directed.
S&F for Steel work in MS tubes (round/square) including special shaped washer, necessary FI angle iron if required to complete the works as in truss,purlins, rafter etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 graded St-240 complete all as specified and directed.
S & F 11-15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and as directed.
Cutting holes in brick walls/RCC slab built in cement mortar or cement lime mortar and stone walls built in lime mortar complete all as specified and directed.
Demolition of PCC in ground floor and pavings not exc 15 cm thickness below or above ground level complete all as specified and directed.
M & L for 25 mm thick PCC 1:2:4 type B1 (Using 20 mm graded granite stone aggregate) as in floors finished even and fair surfaces complete all as specified and directed.
Surface dressing n exc 15 cm deep and getting out in loose/ soft soil complete all as specified and directed.
M & L for 100 mm thick cement concrete type C2,1:3:6 (using 40 mm graded aggregate) as in floors complete all as specified.
M&L for pre-polished cement concrete designed coloured pavement tiles glossy finish of size not less than 400 x 400 x 20mm thick or equivalent size as in floor set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of the tiles and laid over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 using 20mm graded aggregate as in surface channel and drains complete all as specified and directed
M&L 60 mm thick machine pressed precast interlocking paver block any shape and size with grey cement and no pigment confirming to IS 15658-2006 complete all as spd and directed.
M&L for Moorum/red balri filling in floors are paning laid in layer n exc 15cm thick, spread levelled and rammed including watering complete all as specified and directed
M&L sand filling under floor or in floor or paving, laid in including watering and consolidation true surface for laying paver block.
M&L for 75mm thick PCC (1:3:6), type C2, using 40mm graded stone aggte as in plinth protection / paving, surfae finished even & smooth with using extra cement as complete as specified and directed.
Providing and fixing of Pex pipe Outer dia 22 mm, Thickness 3mm complete all as specified and directed. Make : REHAU or equivalent make as approved by GE.
Providing and fixing of Push Pull Connector including fittings complete all as specified and directed. Make: OSMOTECH or equivalent make as approved by GE.
oviding and fixing of Tee including fittings complete all as specified and directed. Make: OSMOTECH or equivalent make as approved by GE.
S&F CPVC pipes 50 mm outer diameter of SDR 11 & plain CPVC SDR 11 fittings as in walls ceiling, floor. etc complete all as specified and directed.
S&F 50 mm bore CPVC Female Brass Threaded Adaptor (FTA/ FBTA) Comlete all as specified and directed.
M&L for hosting, assembly and fixing of double layer scaffolding to external perimeter of building duly cross braced and property aligned for functional aspect and safety of the building including dismantling, shifting & removal from site complete all as specified and directed.
M&L for Rendering 20 mm thick in two layers (Top 10mm thick rendering coat mixed with water proofing compound shall be laid over 10mm thcik plastered surface) with CM (1:4) on of brick work or concrete surfaces finished the surface even and smooth without using extra cement to match the existing surface complete in all respect as specified and directed. Note: WPC shall be measured and paid separately
M&L for applying fiishing walls in new surfaces with Acrylic smooth exterior paint of required shade New work (Two coat applied @ 1.67 Itr/10 Sqm over and including priming coat of exterior primer applied @2.20 kg/10 Sam ) complete all as specified and as directed.
M & L for point wiring (modular fittings) complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLSH) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked in and including 25mm PVC rigid conduit (thickness 1.6mm) MMS ISI marked with accessories concealed in wall / roof / ceiling etc and including all accessories like junken box, tee etc, suitable size of metal flush boxes for modular fitting in wall, modular white cover with frame of suitable size and 1.50 sq mm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for one light/fan/bell point controlled by one way switch.
All as per item No 97 here-in-before but for 3 pin 6 Amps socket outlet on the same board with 1.5 sqmm cable complete all as specified and as directed.
All as per item No 97 here-in-before but for 3 pin 6 Amps switch socket on the independent board with 1.5 sqmm cable complete as specified and directed.
All as per item No 97 here-in-before but for switch socket combination 2 in 1,3 pin 5/15 Amp on independent board with single core 2.5 Sqmm PVC unsheathed copper cable and single core 2.5 sqmm copper conductor cable as earth continuity conductor complete all as specified and as directed.
Supply and fixing of modular socket outlet 2 in 1, 5 pin 5 Amp,230 Volts complete all as specified and as directed.
Supply and fixing of modular switch socket 2 in 1, 5/15 Amps, 230 Volts, including boxes , cover plate etc universal complete all as specified and as directed.
Supply and fixing of switch modular type 5/6 Amps 230 Volt single pole, one way etc complete all as specified and as directed.
Supply & Fixing of Modular White cover plate with frame, 3/4 module complete all as specified and as directed.
Supply & Fixing of Modular White cover plate with frame, 12 module complete all as specified and as directed.
Supply & Fixing of Modular Metal flush box 3/4 module complete all as specified and as directed.
Supply & Fixing of Modular Metal flush box 12 module complete all as specified and as directed.
Supply and fixing ceiling rose surface bakelite three terminal 65 x 50mm, PVC/Polycarbonate,isolated body complete all as specified and as directed.
Supply and Fixing LED Square Light 36 W sensor type of size 2 feet x 2 feet lP54, lumen output 100lm/w, 50 Hz, color temp 5700-6500K, CRI>80, THD<10%, PF>0.9, operating voltage 120-300V, surge protection >3KV, lumen 1800, dust free & zero maintenance LED clean room bottom opening luminaire with CRCA powder coating housing, anti glare diffuser with potentiometric integrated energy electronic driver, with all accessories prewired and connecting electrically, after dismenteling of existing light, complete all as specified and directed. (Make: Havells Cat Part No VENUSNEOHE2X2R36WLED830PIRSENSOR or equivalent make in Crompton/Panasonic/Bajaj.)
S&F Wall Mounted fan of size 400 mm sweep, . single phase heavy duty with their all accessories including including connecting/testing complete as directed. (Make : Havells Cat Part No 400MM Striker HI-Speed or equivalent make in Crompton/Bajaj).
Supply and fixing sub-main wiring (concealed type) for main DB's to sub DB's with PVC (FR-LSH) insulated & unsheathed two runs of 6 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 6 sq mm PVC FR-LSH insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through and including PVC rigid conduit with all accesseries carefully complete all as directed. Make :- Anchor/Havells/Polycab. Note : Three runs of 6 sqmm cable and one run PVC Conduit shall constitute one unit.
Supply and fixing sub-main wiring (concealed) for main DB's to sub DB's with PVC (FR-LSH) insulated & unsheathed two runs of 4 sq mm single core multi stranded copper conductor cable, 1100 Volt grade alongwith one run of 4 sq mm PVC FR-LSH insulated & unsheathed copper conductor cable, 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through and including PVC rigid conduit with all accesseries carefully complete all as directed. Make :- Anchor/Havells/Polycab. Note : Three runs of 4 sqmm cable and one run PVC Conduit shall constitute one unit.
Supply and fixing of MCB DB SPN (double door) 6 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and as directed. Make :- Havells/Legrand/L&T.
Material and labour for power supply unit consisting of starter with 20 Amps over load protection, MCB-20 Amps, 2 Pin & Earth plug socket including MS/PVC box & top cover for AC. Make : Legrand/Crabtree/Cona.
Supply and Fixing of MCB, single pole, 240 Volts, of capacity (6-32 Amps) 'C' series breaking capacity 10 KA. complete all as specified and as directed. Make :- Havells/Legrand/L&T.
Supply and fixing of MCB SPN, 40 to 63 Amps, 240 Volts, 'C' series, breaking capacity 10KA complete all as specified and as directed. Make :- Havells/Legrand/L&T.
Supply and installation, commissioning of air cooled split unit air conditioner electric driven, single phase of capacity 1.5 TR, BEE 5 star rated complete with all accessories.
M/S L.R.ENTERPRISES
NICE INFOTECH
DIPAK ENTERPRISE
CHOWDHURY SMALL INDUSTRIES
KT CONSTRUCTIONS
GAYATRI ENTERPRISE
SK CONSTRUCTION SYNDICATE & ENGG CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .