GE/PKT-70/2019-20

Amount

Demolition of concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and in any position complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Excavating in trenches,cleaning of drain filled with mud n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m area on plan and n exc 1.5 m in depth and getting out mud complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 in one brick thick wall complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ burnt bricks, except bricks straight or curved on plan exc 6m mean radius built in CM 1:4 in one brick thick wall complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out Joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces using CM 1:4 finished even and smooth without using extra cement complete all as specified and directed

M&L for PCC 1:3:6, type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in surface channels and drains finished the surface even and smooth with using extra cement complete all as specified and directed

M&L for PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for PCC 1:5:10, type E-2 using 40mm graded stone aggregate as in surface channels service lines and drains at service line of sewage finished the surface even and smooth with using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4, type B-2 using 40mm graded stone aggregate as in floor, paving and Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M&L for sub base of 50mm thick PCC 1:4:8, type B-1 using 20mm graded stone aggregate complete all as specified and directed

M&L for glossy rubber moulded and table vibrated & coloured (red & yellow) precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid complete all as specified and directed

M&L for providing precast cement concrete 1:2:4, type B-0 as in kerb of size 300mm x 300mmx 100mm (Rubber moulded table vibrated) using 12.5mm graded stone aggregate with smooth finish for mud stops, rounded or chamfered on edges water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Preparation of concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of plastic emulsion weather proofing paint over and including one coat of primer complete all as specified and directed.

Demolition of concrete reinforced any description and in any position not otherwise specifically provided for cover slabs etc. complete all as specified and directed

M&L for providing precast cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces cement concrete in copings including chamfers, weatherings, throating etc. and setting in mortar CM 1:4 to match the joints complete all as specified and directed

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

M & L for 75 mm thick PCC 1:4:8, type D-2, using 20 mm graded stone aggregates as in sub base complete all as specified and directed

M & L for chequred cement concrete tiles 30 cm x 30 cm x 25mm thick , set, jointed and pointed in neat cement slurry with grey cement and pigments in floors including 20mm thick secreed bed or bedding in CM 1:6 complete all as secified and as directed.

M & L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughjs and the like including weathering, sklughtly rounded or chamfered angles and throating, as in kerb/coping including necessary form work complete all as specified and directed

Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed

M & L for machine cut kota stone slab flooring 20-25mm thick over and including 20mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed

M & L for machine kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar over and including 10mm thick rendering in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth and getting out in any type of soil for foundation, shafts, wells, cesspits, manholes, pier holes, laying of cable, pole foundation laying of pipes etc complete all as specified and directed.

M & L for Cement Concrete 1:4:8 type D-2 using 40mm grded crushed stone aggregates as in foundation filling and mass concrete complete all as specified and directed

M & L for mild steel TMT bars 6 m to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No. 30.00 here-in-before but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders complete all as specified and directed.

M & L for RCC 1:2:4 (nominal mix), type B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed

M & L for RCC 1:2:4 (nominal mix) type B-1 using 20 mm graded stone aggregate as in chajjas and the like complete all as specified and directed

M & L for RCC 1:2:4 (nominal mix) type B-1 using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintel over 1.5 m clear span and the like complete all as specified and directed

M & L for RCC 1:2:4 (nominal mix) type B-1 using 20 mm graded stone aggregate as in column complete all as specified and directed

M & L for RCC 1:2:4 (nominal mix) type B1 using 20 mm graded stone aggregate as in slab supported on wall , beams and columns in floors, balconies, canopies, deck slabs and in shelves and like etc complete all as specified and directed.

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

M & L for formwork to chullah hoods, chajjas, troughs and similar items including edges with rough finished flat surfaces of concrete, complete all as specified and directed

M & L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished flat surfaces of concrete,complete all as specified and directed

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished flat surfaces of concrete, complete all as specified and directed

M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. ; with rough finished flat surfaces of concrete, complete all as specified and directed

M & L for formwork to sides of square or rectangular pillars, posts, struts, piers, columns and stanchions with rough finished flat surfaces of concrete, complete all as specified and directed

M & L for brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 in one brick thick wall complrte all as specified and as directed.

M & L for brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4 complete all as specified and directed.

M & L for rendering 15 mm thick on other than fair faces of brick surfaces/stone masonry in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified and directed

M & L for rendering 5 mm thick on chajjas, facias, ceiling and the like in cement mortar (1:3), finished even and smooth on new concrete surfaces, complete all as specified and directed

M & L for preparation of new plastered surfaces of wall and applying two coat of cement base paint over and including a coat of primer/chalk whiting of any colour complete all as specified and as directed

M & L for preparation of new undecorated plastered or un plastered surfaces of walls and applying three coat of white wash on walls complete all as specified and as directed

M & L for preparation of new undecorated plastered or un plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed

Returning filling including spreading levelling, watering and well ramming in layers nexc 25cm thick complete all as specified and directed

Earth filling spreading and levelling in layers n exc 25 cm thick and well ramming incl watering as required complete all as specified and directed

M & L for 25 mm thick, PCC (1:2:4) type B-1 using 12.5 mm graded stone aggregates as in levelling course complete all as specified and directed

M & L for coloured joint free Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n. Exc. 0.18 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed

M & L for coloured Glazed ceramic tiles in vertical surfaces 450 x 350 x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

M & L for hardcore of broken stone boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M & L for 75mm thick PCC 1:3:6 type C-2 as in plinth protection finished even and fair complete all as specified and directed

S & F steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills, glazing , guaging and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 all as specified and directed by Engr-in-Charge.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side as gap insert for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying & fixing in the frame at site as per specification & drawing.

S&F Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reiforced with MS square tube,supplying and fixing in opening as per specification and drawing.

S & F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and directed

S & F 125mm size,extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S & F 100 butt hinges extruded aluminium alloy with galvanised mild steel hinges complete all as specified and directed

S & F PVC 10 ltrs capacity valveless symphonic action type low level flushing cistern including flush pipe, cantilever brackets etc complete all as specified and directed

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F Wash basins, Vitreous China (flat back type) white of size 550 x 400mm, including brackets, cutting for and pinning in ends of brackets or erecting stand including waste pipe etc. complete all as specified and directed

S & F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including provision of lime concrete bedding, making good to floor and all fittings (excluding flushing cistern and flush pipe) complete all as specified and directed.

S & F Viterous China urinal, half stall type, white complete including fixing lugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back (excluding flushing cistern, flush pipe) complete all as specified and directed

S & F brass chromium plated tubular towel rail 20mm dia 'D' type 60cm long between flanges all as specified and directed by Engr-in-charge.

S & F rotational moulded polythene water storage tank (cylindrical vertical with closed top) ISI marked hoisted and fixed in position all as specified in SSR part I capacity of tank 500 ltrs complete all as specified and directed

S & F gun metal, globe or gate valves for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe all as specified and directed by Engr-in-charge.

S & F PVC ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20 mm bore iron pipe and fixed.(Minimum weight 15mm-142gms/20mm-210gms/25mm-455gms/40mm-690 gms) all as specified and directed by Engr-in-charge.

M & L for PVC (SWR) floor trap 75mm diameter of outlet, plain with grating incl jointing with solvent cement complete all as specified and directed

Supply and fixed Pillar taps fancy type cast copper alloy chromium plated with capstan head without letter Hot or Cold water screwed down high pressure for 15 mm dia iron pipe complete all as specified and directed.

S & F 15mm bore dia of pipe bib taps cast copper alloy, fancy type chromium plated, with capstan head screwed down high pressure, screwed for iron pipe or brass ferrule complete all as specified and directed

Supply and fixed stop valve/angle cock fancy type cast copper alloy, chromium plated with capstan head serewed down high pressure, screwed for 15 mm dia iron pipe complete all as specified and directed.

Supply and fixed stop valve fancy type cast copper alloy, chromium plated with long shank and cup (concealed type) capstan head serewed down high pressure, screwed for 15 mm dia iron pipe complete all as specified and directed.

S & F 15mm dia medium grade, ISI marked, GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc conclead complete all as specified and directed

S & F 20mm dia medium grade, ISI marked, GI tubing with all fitting and fixed to wall, ceiling or laid in floors etc. concealed complete all as specified and directed.

S & F PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F PVC (SWR) bends any radious 75 mm dia complete all as specified and directed

S & F PVC (SWR) 75mm bore 'T' equal or unequal complete all as specified and directed.

PVC (SWR) pipes 110 mm dia single socketed in any length with rubber ring joints, laid in trenches/floors or fixed to wall complete all as specified and directed

S & F PVC (SWR) 110mm bore 'T' equal or unequal with access door complete all as specified and directed.

S & F PVC (SWR)vent cowl of 110 mm bore complete all as specified and directed

S & F PVC (SWR) bends any radious 110 mm dia complete all as specified and directed

S & F urinal spreader of PTMT any colcour for fixing with 15 mm dia pipe etc complete all as specified and directed.

S & F swivel shower of PTMT any colour for fixing with 15mm dia pipe. (minimum weight 40 gms) complete all as specified and directed

S & F shower arm 15mm size,195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified and directed

S & F shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as specified and directed

M & L for preparation new plastered surfaces of wall and applying two coat of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of ceiling and applying two coat of white wash complete all as specified and directed.

Excavating over areas, exc 1.5m deep and getting out in any type of soil (soft/hard) complete all as specified and directed.

M&L for 100mm thick concrete bed to drain pipes 150mm bore incl packing under and haunching against the sides of pipe after they are laid and tested in Cement concrete 1:3:6 Type C-2 for bore of pipe 150mm complete all as specified and directed

M & L for PCC 1:2:4, type B-1 using 20mm grded crushed stone aggregates as in foundation filling and mass concrete complete all as specified and directed

M & L for reinforced cement concrete pipes 150mm bore, class NP3, laid and jointed complete with collars complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregate as in benching of manholes and similar work incl form work and finishing all exposed surfaces even and smooth with extra cement complete all as specified and directed

M & L for rendering 20 mm thick on other than fair faces of brick surfaces/stone masonry in cement mortar (1:3) finished even and smooth without using extra cement, complete all as specified and directed

supply only Integral waterproofing compound as specified and directed

M & L for Hardcore of brick bats of gauge exe 63mm despite, spread and levelled in layers but n exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed

M&L for Screed bed or bedding layer in CM 1:6, 20 mm thick for laying floor finishes complete all as specified and directed.

M&L for cutting existing steel tubing for alteration or addition (Each cut measured) including threading of existing pipes placing new tee of required size tapping connection for new pipe line complete all as specified and directed by Engr-in-charge.

Supply, laying & testing GI water tubing 25 mm bore medium grade, ISI marked with screw and socket joints with all fittings, fixtures like bend, sockets, union, nipple etc laid in trenches or floors complete all as specified and directed.

S & F gun metal gate valves 25mm bore with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge.

M & L for point wiring for light/fan controlled by one switch with 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable with and including PVC concealed conduit having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2 mm with 3mm thick ISI marked bakalite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to common earth dolly including , cutting chiseling for concealed piping ,including insulation test of point wiring and making good disturbed surface area and white wash/colour wash to matching with the existing colour and all as specified. Note: colour coding is to be maintained. (Ph-Red, N-Black, Half -Yellow, Earth- Green)

All as per srl item No 105.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.

M & L for point wiring with 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodised pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.Note: (a) Insulation test of point wiring (b) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.

S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.

S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.

S & F ceiling rose 65 x 50mm three terminals complete all as specified and directed.

S & F in replacement of CFLs with LED smart Lamp, B22 type,14 watt, complete all as specified and directed.

S & F energy saving decorative LED box type with Led Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with and including 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. (Note power factor should not be less than 0.95) complete all as spd and directed.

S&F of exausht fan heavy duty 250mm sweep, 230 volts with louvers shutter and bracket and fixing in wall with nuts/bolts/screws complete all as specified and directed.

S&F of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4way, including suitable size copper bus bar and neutral link fixed flush in wall including chases in wall for fixing DB and making good distributed wall surfaces to match with existing specification .

M & L for MCB Single Pole 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M & L for MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 20 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and PCC chamber with PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. (Note:- Excavation and earth work is deemed to be included in the rates quoted).

S & F bldg secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of suitbale size and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable punned down upto 18 cm complete all as specified. (Note: Punned thickness 18cm shall be measured for payment.)

M&L for Brick covering as mechanical protection to cable with well burnt sub class 'B' bricks old size, laid with length perpendicular to length of cable complete all as specified and directed.

S&F of GI tubing medium grade of 40mm nominal bore of pipe in trenches/under road/under culvert/ under paths/ under floor or wall/pole in new position with screwed sockets joints together with all tube fittings (such as bends, elbow, tees, short piece connections, back nuts, dimnishing piece, caps, plugs and union etc) complete all as specified and directed.

M&L for XLPE insulated, armoured, heavy duty electric cable with aluminum conductor, 1100 volts grade, of cross-sectional area 10 Sqmm, 2 core complete all as specified.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 16,500.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder within 28 days from the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

VIKRAM SINGH MANHAS

Ambika Construction Co

OMKAR SHARMA AND CO

Ms Dalip Kumar and Co.

Abrol construction co

RD Engineers

M/S SALARIA BUILDERS