Construction of Grampanchayat Office Building and CSC at village Gaur Taluka Kallamb and District Dharashiv (Under Rashtriya Gram Swaraj Abhiyan (RGSA for year 2025_26 )

Sub work No.1: G.P. Office Building Item No.1:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Additional Spec. No.Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.02 )

Item No.2:- Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means Additional Spec NO. Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.04 )

Item No.3:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.21.40 )

Item No.4:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Additional Spec.No. Bd.A. 11 Page One Number 263 (SSR 22-23 It.No.21.37 )

Item No.5:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd. E. 1 Page One Number 287 (SSR 22-23 It.No.24.01)

Item No.6:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Additional Spec.No.Bd.G. 1 Page One Number 313 (SSR 22-23 It.No.27.01)

Item No.7:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Additional Spec. No.Bd.G.5 Page One Number 315 (SSR 22-23 It.No.27.05 )

Item No.8:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. Additional Spec. No.Bd.G.7 Page One Number 316 (SSR 22-23 It.No.27.06 )

Item No.9:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Additional Spec. No.Bd.F.17, Page One Number 306 (SSR 22-23 It.No.26.33)

Item No.10:-Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No. Bd.F.3 Page One Number 298 and B.7, Page One Number38 (SSR 22-23 It.No.25.11 )

Item No.11:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No. Bd.F.5 Page One Number 300 and B.7, Page.One Number 38 (SSR 22-23 It.No.25.31)

Item No.12:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.6 Page One Number 300 and B.7, Page One Number38 (SSR 22-23 It.No.25.50 )

Item No.13:- Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. canopies and chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec No. Bd.F.9 Page One Number 303 and B.7, Page One Number38 (SSR 22-23 It.No.26.05)

Item No.14:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No. Bd.F.8 Page One Number 302 and B.7, Page One Number38 (SSR 22-23 It.No.25.70)

Item No.15:-Providing and applying Bitumen VG30/VG40 layer at 2 Kilogram. per One Square Meterr over the terrace, structural slab including cleaning the surface for waterproofing as directed complete Additional Spec. No.Bd.J.3 Page One Number 356 (SSR 22-23 It.No.31.02)

Item No.16:- Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No. Bd.F.11 Page One Number 304 and B.7, Page One Number 38 (SSR 22-23 It.No.26.17)

Item No.17:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Additional Spec. No.Bd. L.2 Page One Number 368 (SSR 22-23 It.No.32.03)

Item No.18:-Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. Additional Spec. No.Bd. L.10, Page One Number370 (SSR 22-23 It.No.32.15 )

Item No.19:-Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.32.34 )

Item No.20:-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Additional Spec. No.Bd.L.7 Page One Number 369 (SSR 22-23 It.No.32.11 )

Item No.21:-Providing and laying ceramic tiles having size 30 cm. x 60 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Additional Spec. No.Bd.M.13 Page One Number 386. (SSR 22-23 It.No.33.27)

Item No.22:-Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Additional Spec. No.Bd. M-12 page One Number 385 (SSR 22-23 It.No.33.67)

Item No.23:-Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.39.01 )

Item No.24:-Providing and fixing Country cut teak wood double or single leaf second class fully panelled door shutter with 35mm thick style and rail with 25 mm thick panels with openable fan light as per detailed drawings. Excluding the door frame 60mm x 100mm stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats. (Excluding the door frame) Additional Spec. No.BD-T-7 and 8 Page One Number 481-82 (SSR 22-23 It.No.39.04)

Item No.26:-Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing / moulding the sharp edges wherever necessary, curing, etc. complete. Additional Spec. No.Bd. M. 12 (SSR 22-23 It.No.33.48 )

Item No.26:-Providing and Fixing 32 mm thick One piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets made up of outer ABS sheet of 1.2 mm thick having puff insulation of 35 to 40 Kilogram/One Cubic Metredensity and 10 mm dia.for steel bars 2 Nos., wooden block to receive fixtures, having M.S. hinges 100 mm length, M.S. handles 150 mm length and 10 mm dia sliding door bolt etc. complete Additional Spec.No.As directed by Engineer in charge. (SSR 22-23 It.No.39.80)

Item No.27:-Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.39.68 )

Item No.28:-Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Additional Spec. No.Bd.U.1 Page One Number 537 (SSR 22-23 It.No.40.01)

Item No.29:-Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.42.33 )

Item No.31:-Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats. Additional Spec. No.Bd.V.46, Page One Number 576 (SSR 22-23 It.No.42.19)

Item No.32:-Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete Additional Spec. No.BDV 23 (SSR 22-23 It.No.43.25 )

Item No.33:-Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters Additional Spec. No.As directed by engineer-in- charge. (SSR 22-23 It.No.42.53 )

Item No.34:-Providing and fixing on walls/ceiling/ floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Additional Spec. No.BD.V 5 page 551 and as directed by Engineer in charge (SSR 22-23 It.No.42.56 )

Item No.35:-Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Additional Spec. No.BD.V 5 page 551 and as directed by Engineer in charge (SSR 22-23 It.No.42.55)

Item No.36:-Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. Additional Spec. No.Bd.V.8 Page One Number 554 (SSR 22-23 It.No.41.40 )

Item No.37:-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. Additional Spec.No.Bd.P.5 Page One Number 413 (SSR 22-23 It.No.36.11 )

Item No.38:-Providing and applying two coats of exterior weather shield paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete. NOTE: For Item One Number 15 to 18 prior approval of Superintending Engineer will be necessary Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.35.26 )

Item No.39:-Fixing in position Road Junction/ Informatory Sign Board in ground with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leads complete. Additional Spec. No.MORTH 801 (SSR 22-23 It.No.6.20 )

Sub work No.2: Constn of Common Service Centre at Gaur Item No.40:- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Additional Spec. No.Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.02 )

Item No.41:-Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means Additional Spec.No.Bd.A.1 Page One Number 259 (SSR 22-23 It.No.21.04 )

Item No.42:-Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.21.40 )

Item No.43:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd. E. 1 Page One Number 287 (SSR 22-23 It.No.24.01)

Item No.44:-Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Additional Spec. No.Bd.A.11 Page One Number 263 (SSR 22-23 It.No.21.37 )

Item No.45:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. Additional Spec. No.Bd.G. 1 Page One Number 313 (SSR 22-23 It.No. 27.01 )

Item No.46:-Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Additional Spec. No.Bd.U.1 Page One Number 537 (SSR 22-23 It.No.40.01 )

Item No.47:-Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Additional Spec. No.Bd.G.5 Page One Number 315 (SSR 22-23 It.No.27.05 )

Item No.48:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Additional Spec. No.Bd.F.17, Page One Number 306 (SSR 22-23 It.No.26.33)

Item No.49:-Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.3 Page One Number 298 and B.7, Page One Number38 (SSR 22-23 It.No.25.11)

Item No.50:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec.No.Bd.F.5 Page One Number 300 and B.7, Page.One Number 38 (SSR 22-23 It.No.25.31 )

Item No.51:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec.No.Bd.F.6 Page One Number 300 and B.7, Page One Number38 (SSR 22-23 It.No.25.50 )

Item No.52:-Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec. No.Bd.F.9 Page One Number 303 and B.7, Page One Number38 (SSR 22-23 It.No. 26.05 )

Item No.53:-Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec.No.Bd.F.8 Page One Number 302 and B.7, Page One Number38 (SSR 22-23 It.No. 25.70)

Item No.54:-Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Additional Spec.No.Bd.F.11 Page One Number 304 and B.7, Page One Number 38 (SSR 22-23 It.No.26.17 )

Item No.55:-Providing and applying Bitumen VG30/VG40 layer at 2 Kilogram. per One Square Meterr over the terrace, structural slab including cleaning the surface for waterproofing as directed complete Additional Spec. No.Bd.J.3 Page One Number 356 (SSR 22-23 It.No.31.02)

Item No.56:-Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Additional Spec. No.Bd. L.2 Page One Number 368 (SSR 22-23 It.No.32.03)

Item No.57:-Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. Additional Spec. No.Bd. L.10, Page One Number370 (SSR 22-23 It.No.32.15 )

Item No.58:-Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.32.34 )

Item No.59:-Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Additional Spec. No.Bd.L.7 Page One Number 369 (SSR 22-23 It.No.32.11 )

Item No.60:-Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Additional Spec. No.Bd.M. 12 Page One Number385 (SSR 22-23 It.No.33.40 )

Item No.61:-Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete b) Skirting Additional Spec. No.Bd.M. 12 Page One Number385 (SSR 22-23 It.No.33.41)

Item No.62:-Providing and laying chequered tiles of approved quality of size 30 cm x 30 cm, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Additional Spec.No.Bd. M-12 page One Number 385 (SSR 22-23 It. No.33.66 )

Item No.63: Providing and fixing MS Angle iron Door with frame and shutter, with 3 mm. thick plate, including red oxide and oil paint 2 coats both side as per Rate analysis enclosed herwith

Item No.64:-Providing and fixing in position factory made box type fully glazed window consisting of cold rolled section of 105mm x 60mm x 1.25mm thick frame section filled with cement concrete (1:2:4) and steel section F4B as per detailed drawing and design including mild steel 12mm square bars at 10cm center to center, required F7B section, section T6, section for shutter frame (Louvered clips in case of Louvered window portion) and 3mm thick glass of approved quality of necessaryfixtures and fastening, finishing with one coat of anticorrosive paint etc. complete . Additional Spec. No.As directed by Engineer in charge. (SSR 22-23 It.No.39.23 )

Item No.65:-Providing and applying two coats of lead/zinc base oil paint/ bituminious paint of approved colour to new structural steel work and iron work in buildings including scaffolding if necessary, cleaning and preparing the surface etc. complete. (excluding primer coat). Additional Spec. No.Bd.0.3 Page One Number 404 (SSR 22-23 It.No.35.04 )

Item No.66:-Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces.(excluding the primer coat.) etc. complete. Additional Spec. No.Bd.P.5 Page One Number 413 (SSR 22-23 It.No.36.11 )

Item No.67:-Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Additional Spec. No.Bd.0.8 Page One Number 406 (SSR 22-23 It.No.35.13 )

Item No.69:-Fixing in position Road Junction/ Informatory Sign Board in ground with C.C.1:4:8 block of 60cm x 60cm x 75cm size including all leads complete. Additional Spec. No.MORTH 801 (SSR 22-23 It.No.6.20 )

PART B Item No.70: Charges for testing of material in vigilance and quality control laborator for concrete compressive strength of C.C. Cube (Set of 3 cubes) Rate as per SSR 22-23 Sr.No.19 P.No.584

Item No.71: Charges for testing of material in vigilance and quality control laboratory for Water Absosrption (Set of 5 Bricks), Compressive strength ( Set of 5 Bricks) Efflorescence (Set of 5 Bricks)

Item No.72: Royalty charges a) For Sand= Royalty + surcharge (2%) + Disst. Mineral foundation cess (10%) = 211.95 + 4.23 + 21.19 = 237.37 per cum. As per SSR 22-23 Section V Page No.3

Item No.74: Royalty charges b) For all other Minerals= Royalty + surcharge (2%) = 211.95 + 4.23 = 216.18 per cum. As per SSR 22-23 Section V Page No.3

Please Enable Macros to View BoQ information