Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.3 LAccepted-AOC SRIKONA CHANDIPUR BALASORE 756 025 | BALASORE | BALASORE | ORISSA | 756025 | L1 | Accepted-AOC Accepted being L1 bidder | |
| 2 | L2₹53.0 L+₹4.5 L (9.29%)Rejected-Finance PASCHIM BHAGABANPORE DARUA CONTAI PURBA MEDINIPUR 721401 | PURBA MEDINIPUR | PURBA MEDINIPUR | WEST BENGAL | 721401 | L2 | Rejected-Finance Being L2 bidder | |
| 3 | L3₹59.0 L+₹10.5 L (21.6%)Rejected-Finance GUDUPAHI CHANDIPUR BALASORE ODISHA 756025 | CHANDIPUR | BALASORE | ODISHA | 756025 | L3 | Rejected-Finance Being L3 bidder |
Tender Value
₹49.1 L
EMD Value
₹98,240
Closing Date
12 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Avinash Mishra IDSE EE
Garrison Engineer (I) (CG) Bhubaneswar, Plot No 190/702, Kokila Residency, 2nd Floor, Anant Vihar, Post-Pokhariput, Bhubaneswar- 751020
REPAIRS TO CEILING CHAJJA WALLS AND FINS FACIAS
2022_MES_560507_1
8321/BBSR/03/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Charbatia
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer (I) (CG) Bhubaneswar, Plot No 19
₹98,240
Yes
29 Dec 2022
31 Oct 2022
14 Dec 2022
31 Oct 2022
12 Dec 2022
14 Nov 2022
31 Oct 2022 - 9 Nov 2022
Amount
Taking down cement plaster on brick walls/ concrete surface, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M & L for preparation of surface for free from dust, dirt, loose potions, oil, grease, efflorescence, old coatings etc and cleaning the surface thoroughly.Application of Epoxy Bonding agent HS EpiBond on prepared suarface and reinforcement.Repair mortar can be prepared using polymer modified mortar admixed with Advanced Latex Plus (Cement, Sand and aggregates with 5% to 10% Advaced Latex Plus). Before placing the repair mortar in the affected portion, a bond coat shall be given with Epoxy Bonding Agent Berger EPIBOND,complete all as specified and directed and as per manufacturers instruction.NOTE- Rates including scaffolding for execution of work.
M & L for preparing newly plastered wall surfaces and providing and applying plaster of paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth and material & labour for applying two or more coats of 100% premium acrylic emulsion paint having OC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @0.90 litre/10 Sqm over new surfaces complete all as specified and directed.
Prepartion of old surfcaes of wall for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
Material and labour for rendering 15 mm thick in two layers (10mm + 5mm) externally on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished the surface even & smooth without using extra cement mixed with and excluding water proofing compound @ 2% on top layer of 5mm thick complete all as specified and directed. ( Note : Water proofing compound will measured and paid for separately).
M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved Bonding Agent / Epoxy Treatment in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions and providing pressure Guniting averaging 40mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and directed.
M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved Bonding Agent / Epoxy Treatment in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions and providing pressure Guniting averaging 30mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and as directed.
M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and applying a coat of Nito Bond AR of M/s. Fosroc Chemicals or equivalent approved Bonding Agent / Epoxy Treatment in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions and providing pressure Guniting averaging 20mm thick at a pressure of not less than 6 KG / Sq.cm in Cement Mortar 1:3 duly modifying the mortar with and including suitable bonding agent of M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. @ 5% of weight of cement for sides and soffits of Slabs, Beams, Columns, Fins, Parapets Facias & Chajjas etc., finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and removal of the same on completion and disposal and depositing the demolished material out of MD land complete all as specified and as directed.
M & L for Cutting / Chipping the spalling concrete surfaces of Slabs, Beams, Columns, Fins, Facias, Parapets & Chajjas etc. and trimming, cleaning the surfaces of any thickness to receive Guniting / Plastering, preparing surfaces and providing Non-Shrink, Cementitious Micro Concrete using Rendroc RG' manufactured by M/s. Fosroc Chemicals India [P] Ltd. or its equivalent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. modified with 12mm graded, clean, saturated surface dry crushed stone aggregate in the ratio as per manufacturer's instructions, as in columns, beams and similar structural members including use and waste of water tight formwork to facilitate pouring of micro concrete complete all as per manufacturer's instructions and finally rendering 15 mm thick in Cement Mortar 1:3 and finishing the top surface even and smooth without using extra cement conforming to proper geometrics including providing double scaffolding and safety measures as required and complete all as specified and directed. [Note: Measurement shall be considered for circumference at centerline of core thickness]
M & L for preparing surfaces and applying a coat of Zinc Rich Epoxy Primer [Nito Zinc Primer of M/s. Fosroc Chemicals or equivalent approved bonding agent in M/s. Sika India Pvt. Ltd. or M/s. STP Ltd. or M/s. Choksey Chemicals Pvt. Ltd. or M/s Bostik India Pvt. Ltd. as per manufacturer's instructions] to all steel surfaces as antirust agent including providing double scaffolding and safety measures as required and removal of the same on completion complete all as specified and directed.
M & L for Welded steel wire fabric / expanded metal of weight not exceeding 4 Kg per Sq.m lathing to Concrete surfaces etc. including all laps, cutting and wastage complete all as specified and directed.
S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and directed.
M & L for Welding in repairs exceeding 2.5cm but not exceeding 5cm in length and thickness of metal welded exceeding 6mm and not exceeding 9mm complete all as specified and directed.
M & L for Welding in repairs exceeding 2.5cm but not exceeding 5cm in length and thickness of metal welded exceeding 9mm and not exceeding 20mm complete all as specified and directed.
S & F Reinforcement using High Strength Corrosion Resistant Deformed TMT Bars of Grade Fe–500D of 6mm to 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and directed.
Use and removal of steel formwork to sides of pillars, posts, struts, piers, columns and stanchions of any shape / cross section for fair finished surfaces of concrete complete all as specified and directed.
Use and removal of steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, splays between floors and beams and similar works for fair finished surfaces of concrete complete all as specified and directed.
Use and removal of steel formwork to Chullah hoods, Chajjas, troughs and similar items including edges and similar works for fair finished surfaces of concrete complete all as specified and directed.
M&L 10 mm thick cement plaster in CM (1:6) on fair faces of brick work incl finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
M & L three coat of white wash on newly plastered surfaces incl preparation of newly plastered ceiling surfaces complete all as specified and directed.
M&L preparation new plastered surfaces of brick work or previously un treated and applying two coats of oil bound distemper over wall care putty complete all as specified and directed.
Hacking out broken glasses (any thickness ; size or design portion ) from wooden /metal frame complete all as specified and directed.
supply and fix 3 mm thick ordinary quality sheet glass with oil putty or beadings supplied with joinery in square n exc 0.5 sqm in each complete all as specified and directed.
S&F in reapair stainless steel wire mesh of 0.36 mm dia and average width of aperture 1.4 mm dia fixed with stainless steel wire staples and necessary welding work complete all as specified and directed.
Taking down 15 mm bore GI tubing or up steel tubing and connection including cleaning for re-fixing complete all as specified and directed.
Taking down 20 mm bore GI tubing or up steel tubing and connection including cleaning for re-fixing complete all as specified and directed.
S&F 15 mm bore GI pipe tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.
S&F 20 mm bore GI pipe tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floor complete all as specified and directed.
Cutting chases, pinning in making good to facings brick wall where required and pointing in cement mortar 1:3 to ends or edges of landings steps cills chases for concealed water tubing, exc 10 cm but not exc 20 cm girth complete all as specified and directed.
Material and Labour for rendering 15 mm thick with CM (1:4) on concrete surface including WPC, roof finished even and smooth without using extra cement over neat cement slurry @ 3 Kg /Sqm complete all as specified and dircted. (Note : WPC measured and paid separately)
Material and Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry and 1:1 ( by weight) complete all as specified and directed.
Material and labour for providing water proofing treatment with a layer of APP based polymeric membrane, 3mm thick (minimum), weighing 3.50 Kg/Sqm reinforced with polyster non woven fabric (weighing not less than 160 gm/Sqm) shall be applied over one coat of cold bituminous primer @ 0.25 lit/Sqm complete all as specified and directed.(Note : The overlaps shall be of minimum 75mm on longitudinal direction and 100mm on transverse direction)
M & L for Bitumastic gola, with 80/25 bitumen and coarse and mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces complete all as specified and directed.
Taking down eaves gutters and rainwater pipes (any size or pattern) , including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.
S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.
S & F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S & F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.
S & F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S & F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.
S & F 110 mm bore PVC (SWR) reducers complete all as specified and directed.
Disconnecting existing tanks exc 250 Ltrs n exc 500 Ltrs setting aside (for lowering if required) for repairs, cleaning, etc and hoisting if required reconnectingnand refixing in position complete all as specified and directed. (Note : Cleaning repairing, etc measured separately)
All as per item No 45 above but exc 500 Ltrs n exe 1000 Ltrs
S&F In repair 1000 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed tap) twisted and fixed in position all as specified in SSR Part-I complete all as specified and directed. (Make : Sintex/ Polycon ISI marked)).
S&F In repair 500 Ltr capacity rotational moulded polyethyene water storage tanks (Cylindrical vertical with closed tap) twisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.(Make : Sintex Polycon ISI marked).
S & F in repair for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S & F in repair for PVC (SWR) floor trap for 75mm dia outlet pipe, plain with grating including jointing with solvent cement complete all as specified and directed.
RANA ENTERPRISES
M/s MANIK SETHI
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .