Repairs to joinery roofs sanitary fittings internal water supply and misc works at Auto Regt under AGE B/R II at GE (N) Ahmednagar

Amount

Demolition of cement concrete (un-reinforced) in ground floors and paving not exc 15 cm thickness below or above ground level etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge/transculant sheets etc complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slabs and tiles of any descriptions or thickness in floors, approns etc laid and bedded in any mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling of single layer mangalore pattern or similar tiles in roofing etc complete all as specified and directed by Engineer-in-Charge

Dismantling of posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good distrubed ground (posts embedded in concrete or brick work) etc complete all as specified and directed by Engineer-in-Charge

Dismantling of battens for tiles, shingles etc, of any size including tilting fillets spaced 15 cm etc complete all as specified and directed by Engineer-in-Charge

Demolition of plain cement concrete solid block masonary built in cement mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed by Engineer-in-Charge

Dismantling expanded metal, any thickness or mesh, fixed with steel or wooden fillets, if any etc complete all as specified and directed by Engineer-in-Charge

Demolition of cement concrete (reinforced) in ground floors and paving not exc 15 cm thickness below or above ground level etc complete all as specified and directed by Engineer-in-Charge

Dismantling boarding, any description, fixed in any position with nails etc complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and reconnecting/refixing in the same or new position for 15mm dia bore etc complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and reconnecting/refixing in the same or new position for 20mm dia bore etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster of any thickness on brick/stone walls or concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames not exc 1.50sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down chowkats or frames exc 1.50 Sqm but not exc 4.00 Sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description not exc 1 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and refixing in the same opening after necessary repairs etc complete all as specified and directed by Engineer-in-Charge

M&L for Precast cement concrete block (1:3:6) Type C1 (20 mm graded stone aggregate) masonery with solid blocks exc 10 cm in width and setting in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for reinforced cement concrete (1:2:4) type B-1 using 20mm graded mechanically crushed stone aggregates as in cover slab for drain or manhole including necessary form work and making holes with 25 mm dia steel @ 150 mm centre to centre, set and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

Material and labour for 75 mm thick, plain cement concrete, (1:4:8) type D2, using 40 mm graded mechanically crushed stone aggregates as in sub base etc complete all as specified and directed by Engineer-in-Charge

Material and labour for PCC (1:3:6) type C-1 using 20mm graded mechanically crushed stone aggregates as in cills, steps, bands, copings, bed plates, hold fasts blocks etc including weathering slightly rounded or chamfered angles of throating including necessary form work etc complete all as specified and directed by Engineer-in-Charge

Material and labour for filling in door frames in plain cement concrete, (1:2:4) type B0, using 12.5 mm graded stone aggregates etc complete all as specified and directed by Engineer-in-Charge

M&L for Autoclaved Aerated Concrete (AAC) block Size 625 x 240 x100mm and 625 x 240 x 200 mm thick fixed with E-mix mortar etc complete all as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge Make:- ECOLITE / SIPOREX or equivalent approved by GE.

M&L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement and sand mortar (1:3), joints 20mm thick grouted in cement and sand mortar (1:2) with an admixture of metalic floor hardner 5% by weight of cement and struck flush etc complete all as specified and directed by Engineer-in-Charge

M&L for Edges stones to flooring with stone setts of size 250 to 300mm long x 150 to 200mm wide, and 450mm deep etc complete all as specified and directed by Engineer-in-Charge

Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge

M & L 2nd class softwood plain fillets square rectangular or triangular in section clean sawn and fixed with nails or brads exc 13 Sqcm and n.exc 25 Sqcm etc complete all as specified and directed by Engineer-in-Charge

M&L for 2nd class Hard wood for clean swan battens at 30 cm centre to centre of size exc 5 & n' exc 15 Sqcm etc complete all as specified and directed by Engineer-in-Charge

Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge

Supply and fix Framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other coverings, doors etc to be prepared for handing or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as specified and directed by Engineer-in-Charge

S&F angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths) Fe 410-W (Gde E-250) quality - A fixed independently, without connecting plates, etc (cut to ordinary length etc complete all as specified and directed by Engineer-in-Charge

Material and labour for TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs hooks (stay), heavy for large gates, hook and pintle hinges, large hasps and staples, chains; hand made sliding bolts, clamps, hold fasts, wall ties, plain angle cleats and similar small articles etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs collapsible steel gates, top hung, consisting of channel, pickets, pivoted flat bars, top and bottom runners, brass handles etc, erected in position and securing runners with hold fasts and brackets etc complete all as specified and directed by Engineer-in-Charge

S&F galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm dia barbs at 75mm spacings & straining & fixing to any type of standerd rails straining bolts, including securing or tying at crossig with and provision of galvanised mild steel wire staples or steel pins etc as directed each line of wire to be measured etc complete all as specified and directed by Engineer-in-Charge

S&F mild steel square guard bars 10 mm welded to steel windows / ventilators etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge

Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane painted on the front face & 2mm Plain colour PVC Sheet on back face etc complete all as specified and directed by Engineer-in-Charge

Supply and fix steel windows with side hung double shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as directed.NOTES: 1) Guard bars shall be measured and paid separately as supply only under appropriate item of this BOQ / Schedule `A' 2) M & L for galzing shall be measured and paid separately under appropriate item of this BOQ / Schedule `A'

Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay etc complete all as specified and directed Notes: 1) Guard bars shall be measured and paid separately under appropriate item of this BOQ / Schedule `A' as supply only 2) M & L for galzing shall be measured and paid separately under appropriate item of this BOQ / Schedule `A'

Supply and fixing powder coated aluminium door shutters with frame in two panels made out of section 47.5x44.45x2.25mm @1.12 kg/RM frame, vertical styles of section 47x44.5x2.75mm thick @ 1.15kg per RM, top rail & lock rail of section 47.5x44.5x2.75mm @ 1.33 kg per RM, bottom rail made of section 114.6x44.45x2.3mm@ 2.06 kg per RM with securing rebate @ 0.102 kg per RM with & incl 5mm thick plain sheet glass incl necessary screw, jointing cleats, glazing clip, rubber packing, aluminium snap beeding etc complete all as specified and directed by Engineer-in-Charge

Supply and fix power coated aluminium two track window made out of Jindal aluminium sections Nos. 20669, 20690, 20668 & 20670 including 5mm thick plain sheet glass including rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge

Supply and fix power coated aluminium three track window made out of Jindal aluminium sections Nos. 20671, 20672, 20690 & 20668 including 5mm thick plain sheet glass including rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engineer-in-Charge

S&F powder coated aluminium frame of size 89.22 x 45.66 x 2 mm suitable for fixing three track aluminium windows with suitable size of screws etc complte all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs mild steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel pressed handles oval type stove enamelled black of size 150mm etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs mild steel pressed handles oval type stove enamelled black of size 150mm etc complete all specified and directed by Engineer-in-Charge

Supply and fix 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs 300 mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete all specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised barrel tower bolt of extruded section 150mm long etc complete all specified and directed by Engineer-in-Charge

Supply and fix inrepairs aluminium anodised barrel tower bolt of extruded section 150mm long etc complete all specified and directed by Engineer-in-Charge

Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 200mm long etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 200mm long etc complete all specified and directed by Engineer-in-Charge

Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs aluminium anodised handles of extruded section 150mm long etc complete all specified and directed by Engineer-in-Charge

Supply and fix aluminium die cast body door closure , hydraulically regulated of designation 2 , universal type for door shutters weighing between 36 to 60 Kg etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs aluminium die cast body door closure , hydraulically regulated of designation 2 , universal type for door shutters weighing between 36 to 60 Kg etc complete all specified and directed by Engineer-in-Charge

Supply and fix mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs peg MS stay for steel windows of approved make / sample etc complete all specified and directed by Engineer-in-Charge

Supply and fix 20mm dia powder coated chromium plated curtain rods including brackets etc complete all specified and directed by Engineer-in-Charge

Supply and fixing in repairs galvanised mild steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.00 mm and fixed with tinned tacks or galvanised wire staples etc complete all specified and directed by Engineer-in-Charge

Material and labour for rough dressed shahabad stone, 25 mm to 40 mm thick laid over and including 15 mm thick screed bed in cement and sand mortar (1:6) and pointed in cement and sand mortar (1:3) etc complete all specified and directed by Engineer-in-Charge

Material and labour for Digitally printed paver tiles 300mm x 300mm having thickness of 10 mm thick as approved by GE , with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors, over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all specified and directed by Engineer-in-Charge Make : Dura Stone by Somany / Endura by Johnson or equivalent as approved by GE

Material and labour for industrial heavy duty paver tiles 200mm x 100mm having thickness of 20 mm as approved by GE with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry as in floors, over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all specified and directed by Engineer-in-Charge Make : Dura Stone by Somany / Endura by HR Johnson or equivalent as approved by GE.

Material and labour for joint free / rectified anti skid ceramic coloured tiles 8-10mm thick, area of each tile exc 0.06Sqm but not exc 0.11 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and sand mortar (1:6) set and jointed with white or coloured cement to match shade of tile etc complete all specified and directed by Engineer-in-Charge

Material and labour for coloured glazed ceramic tiles digitally printed premium series of size exc 0.06 Sqm and n'exc 0.10 Sqm , 7 to 8 mm thick as approved by GE as in dado/skirting or on vertical surfaces, over and including 10 mm thick backing coat in cement and sand mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all specified and directed by Engineer-in-Charge

Material and labour for joint free / rectified ceramic coloured tiles SSR series of Johnson / FT Series of Orient-Bell / makes as specified in PS, 8-10 mm thick as approved by GE (square / rectangular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, as in floor etc laid over and including screed bed 15 mm thick in cement and samd mortar (1:6) set and jointed with white or coloured cement to match the shade of tiles etc complete all specified and directed by Engineer-in-Charge

M&L for machine pressed precast concrete interlocking paver blocks glossy finished with grey cement and pigment any shape and size 60 mm thickness M-35 grade over and including a stone dust cushion of 30 mm thick etc complete all specified and directed by Engineer-in-Charge

M & L for chequerred cement concrete tiles with pigment 30cmx30cm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors over and including screed bed of 15mm thickness in cement and sand mortar (1:6) etc complete all specified and directed by Engineer-in-Charge

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall,fixed with self tapping screws etc complete all specified and directed by Engineer-in-Charge

S&F roof tiles mangalore pattern, interlocking at side joints, laid dry etc complete all specified and directed by Engineer-in-Charge

M & L for rendering, 10 mm thick on stone/brick /PCC block or concrete surfaces in cement and sand mortar (1:4) surfaces finished even and smooth without using extra cement etc complete all specified and directed by Engineer-in-Charge

M&L for rendering 15 mm thick in cement and sand mortar (1:4) on brick / concrete / stone surfaces, finished even and smooth without using extra cement etc complete all specified and directed by Engineer-in-Charge

Material and labour for rendering 10 mm thick in cement and sand mortar (1:4) on concrete over AAC Block surface, finished even and smooth without using extra cement etc complete all specified and directed by Engineer-in-Charge

M & L for rendering 10 mm thick in cement and sand mortar (1:3) using 100 % course sand on roof mixed with and including WPC @ 3% by weight of cement and finished the surface even and smooth without using extra cement etc complete all specified and directed by Engineer-in-Charge. Note :- Water proofing compound measured and paid separately under approriate item of this BOQ / Schedule `A' as supply only

Material and labour for providing water proofing treatment on roofs, as per manufecturer's instructions and as specified after taking down/out as existing at site :- (a) Cleaning the newly plastered surfaces with wire brushes and applying a coat of bituminous primer @ 0.30 ltrs/sqmts and allow to dry. (b) Applying and laying torch APP polymer modified bituminous membrance 3 mm thick with non woven polyster matt as reinforced weighing not less than 3 kg/sqmts by thermofusion process as per manufacturers specification including applying one coat of aluminium paint etc complete all specified and directed by Engineer-in-Charge Make : Super Thermolay of STP / Equivalent in DR FIXIT, FosRoc / Asian Paints Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.

Material and labour for false ceiling with Vinyle faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metallized polyster foil backing with Vinyle covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturere's instructions etc complete all specified and directed by Engineer-in-Charge Make : Armstrong or equivalent in Saint Gobian / Lafarge as approved by GE.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads or from metal frame including punching or drilling out old glazing pins/spring clips and supply and fix 3 mm thick ordinary quality plain sheet glass with oil putty in squares not exc 0.50 Sq m in each pane etc complete all specified and directed by Engineer-in-Charge

All as per item No 84 (here-in-before) but, frosted glass 3mm thick glazing with oil putty in squares n exc 0.5 sqm in each pane etc complete all specified and directed by Engineer-in-Charge

Supply and fixing 3.00 mm thick ordinary quality plain sheet glass with oil putty in squares exc 0.50 Sq m in each pane etc complete all specified and directed by Engineer-in-Charge

All as per item No 86 (here-in-charge) but, frosted glass 3mm thick glazing with oil putty in squares exc 0.5 sqm in each pane etc complete all specified and directed by Engineer-in-Charge

Material and labour for preparation of surface and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description exc 10 cm width or girth etc complete all specified and directed by Engineer-in-Charge

Material and labour for preparation of surface and applying two coats of synthetic enamel paint over a coat of red oxide primer on new surfaces of steel of any description exc 10 cm width or etc complete all specified and directed by Engineer-in-Charge

M&L for preparation of new steel ornamental and iron surfaces of any description exceeding 10cm in width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer etc complete all specified and directed by Engineer-in-Charge

M&L for preparation of newly plastered wall surfaces & applying two coats of cement paint at any height incl necessary scaffolding etc complete all specified and directed by Engineer-in-Charge

M&L for preparation of old surfaces of wall & applying one coat of cement paint at any height incl necessary scaffolding with roller finish etc complete all specified and directed by Engineer-in-Charge

M&L for preparation of untreated surfaces of stone / brick masonary (any surface viz, wall, roof tiles, AC sheet) and applying one coat of cement paint, shade as approved by GE at any height incl necessary scaffolding , etc complete all specified and directed by Engineer-in-Charge

Supply and fixing 15 mm bore galvanised steel tubing medium grade laid in trenches or fixed to walls / ceiling etc complete all specified and directed by Engineer-in-Charge

Supply and fixing 20 mm bore galvanised steel tubing medium grade laid in trenches or fixed to walls / ceiling etc complete all specified and directed by Engineer-in-Charge

Supply and fix fancy type CP bib taps, 15 mm dia, cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repair PVC bib tap 15 mm dia, screwed for iron pipe etc complete all specified and directed by Engineer-in-Charge Make : Prayag or equivalent as approved by GE.

Supply and fixing stop valve cast copper alloy, fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all specified and directed by Engineer-in-Charge Make:- Cat part No MOR 1320(Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

Supply and fix in repairs 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repair PVC connections 15 mm size with PTMT nuts of length 600 mm etc complete all specified and directed by Engineer-in-Charge

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories etc complete all specified and directed by Engineer-in-Charge Make :- Sleek essence series Of Hindware or Cat part No E8303 Of Parryware or equivalent in Cera as approved by GE

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren etc complete all specified and directed by Engineer-in-Charge. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 Of Hindware or equivalent in Cera as approved by GE

Supply and fixing in repairs HDPE pipe 32 mm dia of pressure rating 10 Kg / Sqcm fixed complete to walls or in floors etc complete all specified and directed by Engineer-in-Charge

Supply and fixing in repairs HDPE pipe 40 mm dia of pressure rating 10 Kg / Sqcm fixed complete to walls or in floors etc complete all specified and directed by Engineer-in-Charge

Supply and fixing in repairs 75mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls incl bolt & nuts etc complete all specified and directed by Engineer-in-Charge

Supply and fixing in repairs 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with stack clamps FI 50mm by 5mm flat iron clamps to walls incl bolt & nuts etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs PVC (SWR) bends any radius, for 75mm bore of pipe with access door etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs PVC (SWR) bends any radius, for 110mm bore of pipe with access door etc complete all specified and directed by Engineer-in-Charge

S&F 110 mm bore PVC (SWR) branch piece double (single Y) equal or unequal etc complete all specified and directed by Engineer-in-Charge

S&F 75 mm bore PVC (SWR) branch piece double (single Y) equal or unequal etc complete all specified and directed by Engineer-in-Charge

Supply and fix repairs PVC (SWR) floor trap, 75 mm dia with grating including jointing with slovent cement etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs stack clamps made out of FI 50 X 5 mm and 16 mm dia round iron stays,including bolt and nuts and securing ends of stays to wall for 75 to 100 mm dia pipe etc complete all specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC flush pipe for low level flushing cistern and conecting to pedestal pan including jointing etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipe and connecting etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) of 1000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipe and connecting etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs rotational moulded polyethylene water storage tanks Triple layer (cylindrical vertical with closed top) of 2000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to irin pipe and connecting etc complete all specified and directed by Engineer-in-Charge

Supply and fix ball brass valves, 15 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all specified and directed by Engineer-in-Charge

Supply and fix ball brass valves, 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all specified and directed by Engineer-in-Charge

Supply and fix ball brass valves, 25 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all specified and directed by Engineer-in-Charge

Supply and fixed in repairs 32 mm dia PVC waste pipe (outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all specified and directed by Engineer-in-Charge

Supply and fixed in repairs 38 mm dia PVC waste pipe (outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm incl pillar tap 15mm dia CP, waste chain and plug and porcelain stopper , waste pipe, a pair of brackets,or errecting stand and PVC connection etc complete all specified and directed by Engineer-in-Charge Make :- Cat Part No C0471 (CHT) Indus series of Parryware or equivalent in Hindware Ist quality / Cera / Jaquare

Supply and fing PVC mirror cabinet of size 16" X 16" with napkin rail in ivory colour etc complete all specified and directed by Engineer-in-Charge MAKE: PRAYAG or equivalet as approved by GE

Supply and fix in repairs, grating 100 mm dia of PTMT etc complete all specified and directed by Engineer-in-Charge

Supply and fix in repairs, Brass chromium plated shower rose 125 mm size with or without swivel joints any size including fixing to steel pipe or union etc complete all specified and directed by Engineer-in-Charge

Supply and fix tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets etc complete all specified and directed by Engineer-in-Charge Make:- Cat part No UO911 of PLUMBER or equivalent in MARC, ESS-ESS, Jaquare

Supply and fixe in repairs stainless steel kitchen sink matt finish without draining bowl size 410 X 410 X 230 mm, made out of 1.00 mm thick SS sheet of high quality including pair of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all specified and directed by Engineer-in-Charge Make : (i) Model Olympia Satin Finish silent square range of Nirali or equivalent in Dimond / Blue Star (ii) Waste Coupling of make as per sink

Supply and fixing in repair vitreous China bowl urinal flat back, size of 270 X 360 X 450 mm, white, with grating and union for discharge pipe excluding flushing cistern, flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in cement and sand mortar (1:2), securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement and sand mortar (1:4) etc complete all specified and directed by Engineer-in-Charge Make :- Cat Part No C0501 Of Parryware or Cat Part No 60001 Of Hindware or equivalent in Cera / Jaquare as approved by GE.

Material and labour 16 to 18 mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in top table, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing , pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish etc complete all specified and directed by Engineer-in-Charge

Supply and fixing in repairs vitreous china wash down water closet (Pedestal pattern) white including fixing bolts with and including plastic water closet seat cover closed pattern with flat bottom and cover and MSCP almn hinges device connecting to 'P' or 'S' trap etc complete all specified and directed by Engineer-in-Charge Make:-Petite series Cat part No C0287(S)/88(P) including seat cover Cat Part No E8309 of Parryware or equivalent in Hindware / Cera / Jaquare as approved by GE

S&F in repairs Seat Cover etc complete all specified and directed by Engineer-in-Charge Make : Cat part No E8309 of Parryware or equivalent in Hindware / Cera / Jaquare as approved by GE.

S&F in repairs health faucet with 8 mm dia 1 m long flexible tube wall mounted / hooked etc complete all specified and directed by Engineer-in-Charge Make : Cat Part No 573 of Jaquar or equivalent in Marc / Plumber

An amount of Rs 33,225.50 shall be deducted from BOQ on account of schedule of credit

Arihant Construction

SHETE A J

OM SAI ASSOCIATES

M/s AG PATHAN

M/S. M. F. Sharif & Co.

G.A. Construction

M/S-B.R.SONAWANE

Neha Enterprises