Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹29.7 L+₹61,563 (2.11%)Rejected-AOC | L2 | Rejected-AOC Other than lowest bidder | |
| 3 | L3₹33.4 L+₹4.3 L (14.7%)Rejected-AOC | L3 | Rejected-AOC Other than lowest bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rahul Meena, IDSE, EE, Garrison Engineer
GARRISON ENGINEER KASAULI, DISTT SOLAN (HP) PIN 173204 PH 01792273107
WELCOME MAINTOF MD ACCN AT MIL STN KASAULI UNDER GE KASAULI
2023_MES_585829_1
GEK-105/2022-23
Open Tender
Miscellaneous Works
Item Rate
330 days
KASAULI UNDER GE KASAULI
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE KASAULI
₹90,000
Yes
2 May 2023
14 Mar 2023
24 Apr 2023
14 Mar 2023
17 Apr 2023
28 Mar 2023
Amount
Schedule 'A' Section - I
M&L for preparation of old decorated plastered/unplastered surfaces of wall including cornices, pillasters etc of bldgs and applying two coat of white wash complete all as specified.
M&L for Preparation of old Non-AC ceiling boards surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of oil bound distemper over one coat chalk whitening complete all as specified and directed.
M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of oil bond distemper of any approved tint complete all as specified.
Ditto- All as per Srl item No 3.00 above but two coats of oil bond distemper complete all as specified & as directed.
M &L for complete removal of existing treatment with sand paper or iron patti / flat and applying white cement based wall care putty on wall of Average thickness 2.00 mm using blade / spatula to prepare surfaces even and smooth complete all as specified and as directed.
M&L for complete removal of existing treatment with sand paper or iron patti / flat applying two coats of plastic emulsion paint , white or tinted over a coat of wall primer and applying white putty 2mm thick for levelling the surfaces on new wall surface including preparation of surface.
M&L for complete removal of existing treatment with sand paper or iron patti / flat preparation of old painted wooden surfaces of any description and in any situation over 10 cm width or girth and applying one coat of synthetic enamel paint of tint as approved complete all as specified.
ditto- All as per Srl item No 7.00 above but two coats of synthetic enamel paint complete all as specified.
M&L for preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment by washing, rubbing down and stopping of previously treated surfaces and applying one coats of exterior emulsion paint of approved tint and make complete all as specified.
M&L for prepartion of old painted steel surfaces exc 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified & as directed (except roof).
All as per item No 10.00 above but two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old painted NTP/CGI/PGI/or other steel roof surfaces, eaves and gutters etc. exc 10 cm width or girth and applying one coats of synthetic enamel paint of any tint as approved complete all as specified.
M&L for disconnecting existing over head steel/PVC water tanks, setting aside (or lowering, if required) for repairs, cleaning etc and hosting if required, reconnecting and refixing in position including cleaning and removing all scale and dirt etc, from tanks and from mouth of circulating pipes etc capacity exc. 250 ltrs & not exc. 500ltrs complete all as specified & as directed by Engr-in Charge.
All as per Srl item No 13.00 above but exc 500 ltrs and n.ext 1000 ltrs capacity complete all as specified.
M & L for dismantling water tanks exc 250 ltr & not exc 500 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge
M & L for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed by the Engineer-in-Charge
M&L for preparation of old asbestos cement or plastered old painted surfaces as in ceiling and applying one coat of synthetic enamel paint of approved tint complete all as specified.
M &L for Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high complete all as specified.
M & L for Rendering 15mm thick in cement plaster 1:4 on Brick work incl finishing surface fair and even w/o using extra cement complete all as specified and as directed, including taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for preparation of new plastered surface and applying two coats of oil bound distemper on wall over a coat of 2mm th wall care putty over coat of chalk whiting primer.
M&L for two coat cement plaster,on brick/concrete surace of wall first coat 10mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and smooth without using extra cement. (WPC will be paid seperately under respective item) , including taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
Supply only water proofing compund complete all as specified and as directed by the Engineer-in-charge .
Material and Labour for rendering 20mm thick in cement plaster 1:4 on fair faces of stone masonry surfaces , finished fair and even smooth without using extra cement complete all as specified , including taking down cement or cement lime plaster,any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of exterior emulsion paint of approved tint and make, over chalk whiting primer. complete all as specified.
M & L for french polishing on surfaces of any description,over10cm width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats to arrive glossy finish complete all as specified & directed.
S&F purposely moulded looking mirror 5 mm thick glass fixed with studs all as specified and directed by Engr-in- charge.
S&F in repair wall mixer, fency type, chromium plated,with telephonic shower 15mm bore and including connected accessories complete all as specified and directed.
S&F in repair brass CP mixer,for mixing hot & cold water screwed dwn for iron pipe complete all as specified and directed.
S&F in repair 12 mm thick Prelaminated particle board, interior grade prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed.
M&L for piano hinges mild steel bright finish width of flap 40mm fixed in repairs including taking out the existing complete all as specified and directed.
M&L for hasp and staple 75mm size, safety type aluminium anodised including bolt to hinge plate and fixed in repairs to cup board shutter or kitchen cabinet shutters including taking out the existing complete all as specified and directed.
S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm making good wall by painted or distempered finish to match existing complete all as specified and directed.
S&F in repairs 40mm brass C.P coupling for kitchen sink complete all as specified and directed.
S&F in repairs PVC waste down pipe 38 mm bore for Sink complete.
S&F in repairs PVC waste down pipe 32 mm bore for WHB complete.
S&F in repairs 32mm brass C.P coupling for WHB complete all as specified and directed.
S&F in repairs WHB, coloured , flat back size 630x450mm, under counter oval type including cutting for and pinning in ends of brackets, supply and fixed waste pipe 32mm bore and cast iron bracket complete all as specified.
M&L for curtain rod powder coated ornamental type dia 25 mm & overall thickness 25 mm including taking out the existing complete all as specified and directed.
M & L for wall to wall brackets for 25 mm rods including taking out the existing complete all as specified & directed.
M&L for 900mmx750mm plate rack stainless steel with steel shelves and hanging arrangement for utencil including taking down existing rack complete all as specified and directed.
S & F in repair PVC valveless, syphonic action type, dual flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets 10 ltr. Capacity complete all as specified & directed.
M&L for internal fittings for flushing cistern for vitreous china for 10 ltr cap fixed as in repair complete all as specified.
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S&F 15mm bore PVC connection with brass nut of length 450mm fixed as in repairs including taking out the existing unserviceable complete all as specified and as directed.
S&F 15mm bore Bib taps, chromium plated cast copper alloy, fency type with crutch or butter fly handle, screwed down for iron pipe or for brass ferrule fixed as in repairs including taking out the existing unserviceable brass tap complete all as specified and directed.
Supply & fixing 15mm bore stop valve, chromium plated, brass, fancy type, screwed both ends for iron pipe or for union fixed as in repair including taking out the existing stop valve complete all as specified and directed.
Taking up or down 15 mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
Taking up or down 20 mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed.
S & F for 15 mm bore GI tubing, medium grade with all fittings, fixed to walls, ceiling or laid in floors complete all as specified and as directed.
All as per item No. 49.00 here-in-before but 20mm bore -do-
Taking down chowkats or frames without taking down shutters from the frame exc. 1.5 sq. m but n.exc.4 sqm each complete all as specified.
Taking down chowkats or frames without taking down shutters from the frame n exc. 1.5 sq. m each complete all as specified.
M&L 2nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and both side cover with veneer decorative on both side complete all as specified.
S&F Factory made solid PVC frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with mild steel square tube, suppling and fixing in opening as per specificaiton and drawing.
M&L for factory made solid panel PVC moulded door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes fot top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either siude & as gap insert for top rail, lock rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S & F anodised aluminium powder coated (thickness of powder coating not less than 50 micron) three track sliding window/Cupboard frame of size 45.2 x 35 x 1.3mm and window/Cupboard shutter of size 37.5 x 15 x 1.6mm with one or more rebates including joining cleat for fixing and self locking devices of approved quality in each shutter, handles etc complete all as specified and directed. (Note: quoted rate deemed to be included for self locking devices).
S&F anodised aluminium powder coated (Powder coating shall be 50 micron minimum thickness) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21 100mm long (2 No) suitable handle (1 No) compete all as specified (Note : Glass pane, panel insert, door closer, mortice lock shall be measured and paid separately ).
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified
S&F Mild steel work for framed work such as grills, (12mm sqm bars for window / ventilators for guard bars) grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement.
S & F in repair Welded steel wire fabric(weight n.exc 4kg/sqm) complete to wood or steel members complete all as specified and directed .
Material and Labour for preparing new or previously treated or untreated steel surface of any description, over 10cm in width or girth,not otherwise described & applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified
Supply and Fixing for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed .
S&F sheet glass 5.5 mm thick glass plain sheet ordinary quality in square exc 0.5 sq. m in each pane to be fixed in aluminum frame all as specified.
Supply and fixing for butt hinge ISI Marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.
Supply and fixing for butt hinge ISI Marked 75mm size, medium weight, cold rolled stainless steel complete all as specified and as directed.
S&F 300mm Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified & directed.
S&F 200mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.complete all as specified and directed.
S&F 150mm long extrudded brass handles, Fabricated type, polished complete all as specified.
S&F Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor.
M&L Door closer hydraulically regulated, aluminium (extruded section body) designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed.
S&F 300mm MS ordinary rat tail rod pattern spring including roller and roller plate fixed as in repair including taking down the unserviceable existing complete all as directed.
S&F 200mm MS tower bolts of stove enamelled black fixed as in repair including taking down the unserviceable existing tower bolt complete all directed.
M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
S&F GI Metal Ceiling Lay in plain Tegular edge Global white colour tiles of size 295mm X 295 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gsm/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. The exposed metal grid comprises of Main Runners and Cross Tees, roll formed from galvanized steel of 120/180gsm zinc coating. The main and cross tees are provided with bayonet coupling for quick installation and have a height of 32 mm and 24 mm. The grid (size 300mm x 300mm) is suspended from the roof with G.I. wire rods for quick adjustment by suspension hangers at max. 1200 mm and is filled with 1200 mm / 600 mm cross tees(24X26). Hangers are fixed to roof by expansion fasteners. Wall angle are 24 mm X 24 mm X 0.4 mm thick coil coated steel matching the colour of the tile,including demolition of existing unserviseable flase ceiling.
S & F coloured Glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3, complete all as specified, including dismantling existing wall tiling including cement mortar bedding (but not backing).
M & L Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed, including dismantling floor tiling including cement mortar bedding (but not backing)
M&L Vitrified ceramic coloured tiles (of approved light shade) of size 600x 600 mm x10 mm thick in floor, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over 20 mm thick cement screed bed or bedding layer of mortar for lying floor finishes in cement sand mortar (1:4) all as specified and directed, including dismantling floor tiling including cement mortar bedding (but not backing)
Supply and fixed 18-20 mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs etc all as specified and directed, including, dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)
M&L for PVC cover for water tank capacity exc 500 ltrs but n.exc. 1000 ltrs including fixing with MS hinges and staples made for purpopse fixed in repair complete all as specified and directed.
M&L for PVC cover for water tank capacity exc 250 ltrs but n.exc. 500 ltrs including fixing with MS hinges and staples made for purpopse fixed in repair complete all as specified and directed.
M&L for 15mm dia brass Ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing complete all as specified and directed.
M&L for 20 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing complete all as specified and directed.
S&F for wall mounted Health faucet of stainless steel body and exceeding 1 mtr long cromium plated spiral cord and wall hook complete all as specified and directed.
S & F in repair of sheet glass 4.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge.
S & F in repair of galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.
S & F in repair aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed .
S&F in repair of Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe),including plastic water closet seat, black, closed pattern with flat bottom and seat cover, and mild steel chromium plated or aluminised/ hinging device complete all as specified in repair.
S&F in repair of Vitreous china squatting pan, "Orissa pattern" of size 680 x 470 mm white with integral foot rests(excluding flushing cistern, flush pipe and waste pipe), cast iron P or S trap including provision of cement concrete (1:5:10) type E2 with stone aggregate for setting the trap & pan,complete all as specified.
Taking down carefully any type of battens or conduit point wiring with or except conduit complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLSH PVC insulated, unsheathed, copper conductor cable in and incl PVC casing -n-caping of any size/dia medium grade complete with all accessories/fittings, brass screws, washer etc and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-
One light /Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
One bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.
One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.
One 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.
One two way point controlled by two, two way switches 06 Amps complete all as specified and directed.
All as per serial item No 92.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.
All as per serial item No 92.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.
Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLSH PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc,and including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded FRLSH copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for the followings :-
One light / Exhaust fan point controlled by one, one way switch 06 Amps complete all as specified and directed.
One bell point controlled by one, one way switch 06 Amps complete all as specified and directed.
One 3 pin, 06 Amps socket outlet point on independent board controlled by one, one way 06 Amps switch complete all as specified and directed.
One 3 pin,06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch complete all as specified and directed.
One two way point controlled by two, two way switches 06 Amps complete all as specified and directed.
All as per serial item No 95.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06 Amps socket outlet point on independent board complete all as specified and directed.
All as per serial item No 95.00 here - in - before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 3 pin 06/16 Amps socket outlet point on independent board complete all as specified and directed.
Supply & fixing modular switch 1module, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing socket, 06 Amps 2/3 pin combined, 2module, 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing modular switch 1module,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing socket, 06/16 Amps 2/3 pin combined, 2module, 240 volts complete all as specified & directed by Engr-in-Charge
Supply and fixing modular bell push 1module, 06 amps , 240 volts all as directed by Engr-in-Charge
Supply and fixing door bell ding dong type , 240 volts AC.
Supply & fixing modular switch 1module, 06 Amps single pole, two way 240 volts complete all as specified & directed. by Engr-in-Charge.
Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge.
Supply and fix LED lamp 9/10 watt complete all as specified and directed.
Supply & fixing in repair LED tube light batten fitting 18/20W, (single Side Connection) including LED Rod including all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply & fixing/fixing in repair LED mirror light 10W including rod complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
Supply and fixing in repair of 9/10 W LED bulk head luminairies incl LED light with clear prismatic diffuser,driver holder connecting up with three core flexible copper conductor cable of suitable size including all acessories for fixing on wall all as specified and directed by Engr-in-Charge.
Supply and fixing wall mounted decorative fancy light fitting stylo (Round) suitable for 14 watts LED lamp including provisson of fixing on wall with all items required for fixing all as specified and directed by Engr-in-Charge .
Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed by Engineer - in - Charge.
Material and labour for sub main wiring with 2x4 Sqmm nominal cross sectional area (two single core cable of 4 Sqmm for Phase and neutral + 01 single core cable of 4 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed. Note : 3 (Three) run measured as 1(one) run.
Ditto all as item No 113.00 above, but by using two single core cable of 6 Sqmm for Phase and neutral + 1 single core cable of 6 Sqmm for earth wire Note : 3 (Three) run measured as 1(one) run.
Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as directed by Engineer - in - Charge.
Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.
-Ditto- all as per item No 116.00, but of size 08 way SPN.
-Ditto- all as per item No 116.00, but of size 12 way SPN.
Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections with suitable thimble complete all as specified & directed.
Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 20 Amps to 32 Amps 10kA and making connections with suitable thimble complete all as specified & directed.
Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections with suitable thimble complete all as specified & directed.
Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision of four pole 100 Amp isolator and MCBs of cap 20 to 40 Amps as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.
Supply & fix Isolator 4 Pole 'C' series 100 amps capacity AC 415 V,10kA complete all as specified and directed.
M & l for Sheet metal enclosure fiiting on wall and making the connection with provison of MCCB 4 Pole 100 Amps 25 KA, 415 volts , 50 Hz ,thimble/lugs, aslo including all nuts bolts required for fixing all as specified and directed by Engineer - in - Charge .
Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.
Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.
Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.
Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.
-ditto- all as per item No 128.00, but 16 Sqmm 2 core
-ditto- all as per item No 128.00, but 10 Sqmm 2 core
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in hard/dense soil and gating out in hard/dense soil complete all as specified and directed.
Supply / laying and fixing 50 mm bore HDPE pipe PN10 with all fittings laid in trenches for cable protection complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.
Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.
Taking down the geyser of 25/ 50 ltr capacities from the site after disconnecting the water connection, electric connection, opening the geyser assembly and descalling deposited in the inner container and outlet water pipe set complete all as directed by Engineer-in-Charge. (Note:- Replacement of Unserviceable bolts, rubber real, ring nuts, washers to be included in the rate quoted by tenderer. However supply & fix or material & labour for GI fittings and other connected works shall be measured and paid for separately under respective items of schedule ‘A’ here in after) :-
Supply & fix in repair of geyser syphon assembly steel plate with nuts and bolts, washers, clamps and rubber ring any Make of geyser, for 25/50 ltr capacity of Geysers.
Supply & fix in repair of thermostatic switch 11 " long ISI marked complete with electric connection suitable for geyser any Make complete all as specified and directed.
Supply & fix in repair of geyser element 1.5 /2.0 KW capacity with rubber ring Round/trangular type complete with clamps, nuts and bolts washers etc for geysers ISI marked (any Make) complete all as specified and directed.
Supply and fix Non return valve 15mm dia made of bronze ISI marked heavy duty fixed in repairs complete all as directed by Engineer-in-Charge.
Supply & fix (in repairs) 15mm dia PVC connection 450 mm long , suitable for hot water supply ,complete with 2 Nos brass nuts complete all as specified and directed.
Supply & fix (in repairs) 15mm dia PVC connection 450 mm long , suitable for cold water supply ,complete with 2 Nos brass nuts complete all as specified and directed.
Supply & fix in repairs of Zebra fastner of size 12x100 mm complete all as specified and directed .
Taking down of the following accessories in repair works including all necessary fitting items such as screw, nut and bolt, connector, flexible copper wire 1.5/2.5Sqmm size etc including cheking/testing complete as directed by Engr-in-Charge :-
Supply & fixing modular switch 1module, 06 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing socket, 06 Amps 2/3 pin combined, 2module, 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing modular switch 1module,16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge
Supply & fixing socket, 06/16 Amps 2/3 pin combined, 2module, 240 volts complete all as specified & directed by Engr-in-Charge
Supply and fix in repair lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 1 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 2 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 3 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 4 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 6 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair white cover plate with frame 8 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 1/2 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 2 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 3 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 4 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair metal flush box 6 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair modular switch socket combination16 A, 6 pin, 3 module complete all as specified & directed by Engr-in-Charge
Supply and fix in repair modular switch socket outlet 03 pin 06 A, flush type complete all as specified & directed by Engr-in-Charge
Supply and fix in repair modular switch socket outlet 03 pin 16 A, flush type complete all as specified & directed by Engr-in-Charge
S&F in Replacement Exhaust Fan 250mm plastic body , 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed
S&F in Replacement Exhaust Fan 300mm Sweep metal body (Heavy Duty), 1400 RPM with air delivery 1050 CMH including and taking down unserviceable, complete all as specified and directed.
M&L for electric insulation tape heavy duty complete all as per specifed and directed
S&F self ballasted LED Retrofit Bulb 5 Star Bulbs 12 Watt with PBT body shell and PC diffuser. 210 digree wide distruction CCT 6500K, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling taking out unsv CFL/LED Bulb complete all as specified and as directed.
Supplying and fixing Meter Box made up of BWR plywood board of 8mm thickness covered with 3mm thick laminated sheet, size of the box shall be of 900mm x 450mm x 250mm including provision of shutters with lock and clasp complete and fixed as directed by Engr-in-Charge.
Amount of credit of Rs. 65203.60 for retrived old material as mentioned in Schedule 'A' section-II of tender document in pdf form, will be deducted offline while acceptence of tender.
R. P. Suppliers and Construction Co.
Varindera And Varindera Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .