Interior fit outs for the proposed office space for Sixteenth Finance Commission, ministry of Finance at STC building 19th floor New Delhi

CEMENT CONCRETE : Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CUM 15.29 6,812.00 1,04,155.48

RAISED FALSE FLOOR : Providing and fixing removable raised/false access flooring with systemand its components of approved make

for different plenum height with possible height adjustment upto 50 mm, comprising of modular loadbearing floor panels supported on G.I.

rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by

Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm

outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud

for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to

the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both

ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the

grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for

11.54 access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical

1.02 conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H

grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum

64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming

compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm

thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on

area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and

Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers

specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality

of the product.

11.54.2 450 mm Finished Floor Height (FFH). SQM 5.50 5,977.35 32,875.43

LAMINATED WOODEN FLOORING Providing and laying 8.3 mm thick AC5 grade laminate wooden flooring having good castor chair

and furniture resistance strength. Plank dimension to be 1215*195*8.3mm with clock locking system and wax coating for better sound

1.04 M.R. resistance. Impact and abrasion resistance to be of high grade having class EN 13329. The flooring shall be laid with 2mm thick underlay SQM 129.95 2,159.00 2,80,562.05

and PVC sheet and prevent against moisture and foot taping sound. The item also includes the skirting and any other profiles required for

proper installation.

VITRIFIED TILES : Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

11.41A mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

1.05 matching pigments etc., complete. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

CARPET TILES: Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6) only; Multi-Level Pattern Loop,

manufactured using 100% solution dyeing process, Tiles of size 23cms x 91cms or equivalent as per direction of EIC and site

requirement with SSP® Soil Protection treatment TM or equivalent containing properties of Stain Repel, with Tile- 100% PVC Free/ 100%

Bitumen Free/ 100% Recyclable - backing system with recycled content, made from thermoplastic polyolefin compound with reinforcing

layer high-performance environments requiring modular flooring, having tufted yarn weight of 542.5 gsm/sqm and average yarn density of

1.06 M.R. Minimum 9143 oz/cu. yd. or more, Nominal total thickness 5.42 mm minimum, Radiant Panel class 1 rated (ASTM E648), NBS smoke < SQM 90.00 2,500.00 2,25,000.00

450, Pill test -Passed, Anti Static Property less Than 3.5 kv, Texture Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial

Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor air quality, including fixing/ installation with Low/ Zero VOC

content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354) 0.2 Class D.or equilent as per direction of EIC and

site requirement

TOTAL FLOORING WORKS 6,25,357.32 5,05,562.05

2 Digitally signed by AMIT

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with

tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

2.01 12.45 channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish

of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) SQM 385.75 1,355.80 5,22,999.85

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling/ wall formed out with TRANSLUCENT Printed fabric coverings

made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m &5.1m with

weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light transmission

of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance to B-S1, d0.

The fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s). At labeling in

accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with approved

manufacturer guidelines. It comes with 10- year manufacturer guarantee. The installation of TRANSLUCENT Printed fabric should be dry

installation & done at room temperature using CLIPSO PVC, ABS Grippers. Clipso ceiling base to be made of MS or Wooden frame

finishing to a flush finish of tapered and square edges in desired design as per architect specification.Supply of LED Lights behind the

Fabric Wall/ False ceiling in modules/ PCB with recommended wattage as per manufacturer's standards to give an effect of ambient

lighting. LED make MLS/ Bridgelux / Osram- SMD 2835, LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree,

Colour temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB should be positioned

properly to provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.

GYPSUM LOUVERED CEILING: 12.5 x 600 x 600 high grade, glass-fibre reinforced, acoustic, gypsum panel with acoustic perforation as

Unity 3 - square 3.5x3.5mm c/c 8.33 type U3.The tiles with Strip shall be screw fixed on min. 60mm wood or steel furring. The with strips

tiles are with edge B+ and are pre-painted ready for installation on site. screws, type, with white-painted head are used for screw-fixing.

The acoustic tiles are furnished with a grey (white) absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887).Colour

2.06 MR - White,, gloss 5 (standard) or re-paintable at site with water based acrylic paint.Closest match for repainting: Paint Type - Waterbased SQM 73.00 14,000.00 10,22,000.00

acrylic emulsion paint including titanium for hygienic indoor climate. Light Reflection: 69.2% according to DIN Norm 5036.Acoustic

Property - αw: 0.95; NRC: 0.90.Fire Class - A2-s1,d0 .Suspension - The tile must be screw fixed to furring of 22 mm wood or 60mm steel

battens at 300 mm c/c.

TOTAL FALSE CEILING WORKS 5,22,999.85 10,82,000.00

3 WALL FINISHES WORKS

GLASS PARTITION (FIXED GLASS PARTITION WITH 10MM GLASS): Providing & Fixing of Modular Single glazed partitioning frame

make 45mm System, Using KL 45 001 (45mm x 25mm) as wall starter section, Using KL 45 001 & KL 45 002 (45mm x25mm) as Top &

3.01 MR bottom channel. Toughened Glass of thickness 10mm to be installed with required accessories ie glass to glass aluminium I sections, T SQM 26.64 4,400.00 1,17,216.00

section & 90 degree sections as per the requirement & Glass packing to adjust the floor level. Insertion of silicon/Thermoplastic gasket to

adhere the glass firm & airtight. Partition Height Considered is 2500mm

FRAMELESS HINGED GLASS DOOR: Providing & Fixing of Modular Aluminium single leaf Stile door frame of make 45 mm System duly

Anodized Aluminium Sections using KL 45 001 & KL 45 003 (45mm x 45mm) and Stile door of size 60x35mm as door frame with

3.02 MR Toughened Glass of Thickness 10 mm. Hardware as per make list and Lever Handle with Mortise Lock, Exposed Door Closer, Set of 4 NOS. 12.00 44,000.00 5,28,000.00

Hinges, Door Stopper and required accessories ,Silicone/Thermoplastic Gaskets & Screw Caps. Door Size: 1000x2500mm

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed

9.1 and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

3.03 separately).

9.1.1 Second class teak wood CUM 0.25 1,42,949.70 35,380.05

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,

9.21 core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or

3.05 cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 15.84 2,392.65 37,899.58

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

shutters (over all area of door shutter to be measured).

3 Digitally signed by AMIT

Providing and Fixing 22x922 mm D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved make and

3.07 MR model all complete as per the direction of Engineer-in-charge. Each 12.00 8,549.00 1,02,588.00

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per

3.08 MR the direction of Engineer-in-charge. Each 12.00 896.00 10,752.00

Providing and Fixing Double cylinder Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

950mm.Closing speed : 130°

3.09 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Each 12.00 8,956.00 1,07,472.00

Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.10 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal EACH 48.00 228.85 10,984.80

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum

tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on

3.15 MR Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors). Contractors payment wouldn't be SQM 55.44 1,200.00 66,528.00

released until & unless he/she produces orginal warranty certificate from the manufacturer.

ACOUSTIC PANELLING : PET Panels made of Polyester in size 2440x1220 mm with thicknesses of 9mm. Density is 1650 gsm for

9mm. The panel can plain/printed/ embossed/ customized to form different patterns. Panels can be cut to customize shape and size to

make different patterns. The acoustic panels should have an NRC of up to 0.3-0.6 Bollard PET Panels should be made of recycled

3.17 MR material and should be 100% recyclable. The panels need to be installed as per approved pattern and color on a plain wall. The panel SQM 46.08 2,620.00 1,20,729.60

needs to be glued or nailed with headless nails. Thickness: 9 Sheet Size: 2440mm x 1220mm Tolerance: +/- 5% Density: 1650 gsm Fire

Resistance: EN13501 – Class B s1, d0(SGS) NRC: 0.3 – 0.6mm, depending on the air gap between the wall and the panel Shades: 36

shades available Material: 100% Polyester

LACQUERED GLASS: Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color by Client / Engineer

in charge, fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood / MDF / Mineral fibre

board which is mounted on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain coating process);

3.18 MR opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or more); panel to panel colour SQM 29.04 3,900.00 1,13,256.00

consistency (measured by photo spectrometer); highly durable (passes hardness test for minimum 220 oscillations); humidity resistance

(conforms to BS EN 1036 1999 or equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no copper, no

formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer coating (compatible neutral cure silicon)

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side

inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and

ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or

metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

9.105 spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall screws on studs, floor and

3.19 ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal joints

of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended

jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for

board as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to

IS: 2095: part 3 (Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING : Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab &

celling, cladded with Acrylic Solid Surface 6mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with

industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural

3.2 MR requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design and SQM 16.00 9,210.00 1,47,360.00

dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided, along

with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE

4 Digitally signed by AMIT

ROLLER BLINDS : Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller

Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m, Thickness

0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be

complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and safe installation,moulded

plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be

positioned at right side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in position upon

release of the ball chain by means of a built in friction lock.Universal clutch for left and right hand operation.Chain Gear Ratio of

1.75:1.The END PLUG shall be molded of plastic witha steel location pin. The plug shall be inserted into the tube end. (Opposite to the

Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided with covers and used in right hand or

left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug pin.Can beinstalled

(a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of80mm.The ROLLER

TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way integral with

the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The BALLCHAIN shall

be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless ballchain.It is used for

raising or lowering action of the shades.hall be suitable for sill, face or side facing. Cord Equalizer shall be injection melded from impact

modified acrylic with a high flexural modulus

PELMET: Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium

density grade I, ISi marked and conforming to IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303

BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S.

3.22 9.42 flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 RM 35.00 600.55 21,019.25

mm long etc. all complete.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to

3.24 floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 13.50 1,123.80 15,171.30

3.25 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 13.50 104.80 1,414.80

13.4 12 mm cement plaster of mix :

3.27 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 130.00 262.70 34,151.00

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives

New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

PLY: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face, and

3.29 fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type SQM 252.80 1,224.65 3,09,591.52

4MM THICK MDF BOARD: Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved

3.30 MR primer on one face, and fixed on wooden/ steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board SQM 130.00 270.00 35,100.00

FRAME: Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 GSM, consisting of U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base

metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at

3.31 MR not greater than 50 mm from either end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and SQM 272.80 710.00 1,93,688.00

0.55mm thick installed perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not more

than 610mm centers. Maintain 5 to 10mm gap between C Stud and web of U Track.

LAMINATE: Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high

3.32 9.127.2 density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive SQM 100.96 897.30 90,591.41

of approved quality. 1MM THICK

TOTAL WALL FINISHING WORKS 7,18,989.84 17,42,402.10

5 Digitally signed by AMIT

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply, all ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall

be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss

4.01 MR acrylic of approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs which will be covered with SQM 3.42 6,406.00 21,908.52

PVC skirting in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/ slab using metal screws

of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for

measurement and payment. Cabinet boxes size would be varies from 400x560x710MM to 1000x560x710MM (approx.) and join together

as per site requirements etc.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia shall

be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high gloss

acrylic of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front face

area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size would be

varies from 400x560x710MM to 1000x560x710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels Each 5 3,548.00 17,740.00

4.02B MR Providing and fixing baskets Each 5 4,013.00 20,065.00

WATERPROOFING: Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming

to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement

4.03 22.3 plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of SQM 25.30 769.60 19,470.88

vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth

course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc. and

4.04 MR any other details as and when desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be appointed after due LS 1.00 2,50,000.00 2,50,000.00

appproval from Engineer InCharge.

DISMANTLING: Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.

Providing and fixing Toilet cubicals with the following specifications:

Thickness of Compact Laminate: 18 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of Cubicle: As per drawing

Door Size: 1995mm (H) x 610mm (W)

Divider Size: 1995mm (H)

Overall Height Of Cubicle: 2100mm (Including boom Gap of 100mm)

Accessories: Standard - Merino Make Stainless Steel - 304 Grade accessories)

a) SS "U" Channel

b) SS "F" channel

d) SS Privacy Thumb turn c/w Occupancy Indicator

e) SS Door Knob

f) SS Hinges with Cover

g) SS Shoe Box Leg 18mm - 316 Grade

h) Rubber Lining for Groove

i) S.S.Screws 304 G & P .V.C Wall Plugs

J) WC as selected by Engineer in charge/client

Providing and fixing Urinal partitions with the following specifications

Thickness of Compact Laminate : 12 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of UMP : 1200 mm (W) X 500 mm(H) AND 900 mm (W) X 450 mm(H)

Overall Height Of Cubicle : 1850 mm (Including bottom Gap of 650mm)

Accessories: Standard – Merino Make Stainless Steel - 304 Grade accessories)

a) Right Angle Brackets

b) S.S.Screws 304 G & P.V.C Wall Plugs

6 Digitally signed by AMIT

TOTAL MISCELLANEOUS WORKS 19,470.88 5,74,898.52

7 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

TOTAL AMOUNT TOTAL AMOUNT

TOTAL AMOUNT TOTAL AMOUNT

NO S NO DESCRIPTION UNIT QUANTITY RATE

2023 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY)

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 4 2804.00 11216.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 4 12152.00 48608.00

SET, SIZE: 375X520X400 MM

MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 4 5608.00 22432.00

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 4 4500.00 18000.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE AND WALL HOOK of approved makes EACH 4 2150.00 8600.00

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

MR 10 CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE EACH 4 6543.00 26172.00

CONNECTION WITH WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality)

17.31 12 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws EACH 4 1607.95 6431.80

and washers complete

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

13 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 8 574.30 4594.40

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 4 416.80 1667.20

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

Digitally signed by AMIT

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

17 20mm nominal outer dia pipes 335.00 10050.00

18.7.3 25mm nominal outer dia pipes METRE 30 401.55 12046.50

18.7.4 32mm nominal outer dia pipes METRE 10 518.75 5187.50

18.7.5 40mm nominal outer dia pipes METRE 10 702.95 7029.50

18.7.6 50mm nominal outer dia pipes METRE 10 934.15 9341.50

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe

with clamps at 1.00 m spacing.

18.8 This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 40 497.80 19912.00

18.8.2 20mm nominal outer dia pipes METRE 20 537.60 10752.00

18.8.3 25mm nominal outer dia pipes METRE 10 627.25 6272.50

18.8.4 32mm nominal outer dia pipes METRE 10 739.30 7393.00

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

19 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 1 798.95 798.95

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

20 alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including cost of shuttering for proper completion of the work, breaking and

making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 50 501.00 25050.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 10 389.00 3890.00

Digitally signed by AMIT

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 22 complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 10 501.00 5010.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 10 679.00 6790.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED

MR 25 DIVERTOR FOR BATH & SHOWER EACH 1 14021.00 14021.00

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/ SHOWER

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND

MR 27 EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH EACH 1 16826.00 16826.00

CHROME PLATED) WITH RUBIT CLEANING SYSTEM

MR 28 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 1 9348.00 9348.00

MR 29 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 1 4106.00 4106.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH

MR 31 LOWER HANGER

MR 32 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 1 1912.00 1912.00

MR 33 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 6 4653.00 27918.00

MR 34 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 1 3118.00 3118.00

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml

17.80 35 consumption), having water inlet from back side, including fixing to wall with suitable brackets Each 3 7979.20 23937.60

all as per manufacturers specification and direction of Engineer-in-charge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.1 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

17.10.1.1 510 x1040 mm bowl depth 250 mm

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR 2022/ TOTAL AMOUNT TOTAL AMOUNT

DSR 2022/ TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

MR DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in

1.55 surface / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 1725 334.00 576150.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 101 122.00 12322.00

1.24.5 6 pin 15/16 amp socket outlet Each 15 197.00 2955.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 50 40.00 2000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

1.5 sq. mm + 1 X 1.5 sq. mm earth wire

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 5 439.00 2195.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1005.00 60300.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1365.00 81900.00

Digitally signed by AMIT

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

b) 3.5 C x 95 Sqmm XLPE cable Metre 5 864.00 4320.00

c) 3.5 C x 70 Sqmm XLPE cable Metre 5 680.00 3400.00

d) 3.5 C x 50 Sqmm XLPE cable Metre 5 510.00 2550.00

e) 3.5 C x 35 Sqmm XLPE cable Metre 30 378.00 11340.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

D.4 2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

b) MR 12 way (4 + 36), Double door Each 4 9081.00 36324.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and

E.1 MR single cable outlet/ glavanized steel, paint RAL 7031 for floor box . The item should be Set 1 12106.00 12106.00

complete in all respects

Digitally signed by AMIT

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for

Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for

E.2 MR headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box. The item Set 1 6803.00 6803.00

should be complete in all respects

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 6 148.00 888.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

required suitable number of GI couplers for joining raceways and fixing GI brackets and all

MR accessories complete in all respect as per the directions of engineer in charge .Or equivalent

specifications or as per the site requirement

a) 300mmx 38mm(GI) - 3 compartment Metre 2 1738.43 3476.86

E.4 b) 225mmx 38mm(GI) - 3 compartment Metre 2 1420.39 2840.78

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables

at the intersection of raceways supplied completely with base and cover plates, height

MR adjustable junction boxof suitable mm including all accessories complete in all respect as per

the directions of engineer in charge Or equivalent specifications or as per the site requirement

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Metre 180 47.00 8460.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.12 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with

4.1 connectors suspended from the cieleing with MS suspenders including bolts and nuts painting

suspenders etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 20 1137.00 22740.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe SET 4 13838.00 55352.00

of 2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. Metre 200 70.00 14000.00

Digitally signed by AMIT

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:or its equivalent as per the requirement of site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -3 Nos.

(b) 40 Amps, TPN, MCB - 3 nos

Panel complete as above Each 1 93541.00 93541.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply

with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium

bus bar and including supplying and fixing following switchgears, meters and accessories,

inter-connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:or its equivalent as per the requirement of site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

Digitally signed by AMIT

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 40 Amps, TPN, MCB+ ELCB -2 Nos.

(b) 32 Amps, TPN, MCB + ELCB - 2nos

Panel complete as above Each 1 102895.10 102895.10

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

17 2.21 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 6 269.00 1614.00

front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 292.00 584.00

front side as required

Supply, Installation, Testing and Commissiong UPS of required capacity with True Online

Double Conversion UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1

Configuration IGBT Based Rectifier and IGBT Based Inverter Batteries of suitable capacity/

Voltage, SMF Amararaja/Exide with minimum VAH capacity suitable for 30 minutes backup

MR with each ups Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC Cable Upto 10 KVA 10 24489.00 244890.00

/or as per site requirement Meters complete in all respect as per the directions of the engineer

in charge. UPS should have availability of Input /Output isolator, Inbuilt manual bypass along

with phase sequence corrector. Unity PF (Approx) .UPS Efficiency shall not be less than 90%

from 25% to 100% Load

Total of Electrical items 1466930.00 600311.69

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of LED Pendant luminaire

with LED(Light Emitting Diode) system power: 28W, 120 LM/W system

efficacy, colour temperature of 4000K, neutral white, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours, energy efficient

LEDs, CRI>80, luminous flux of 3360 lm, MacAdam 3, T.H.D≤10%, driver

1 MR efficiency ≥ 88%, surge protection of 2.5kV, direct light emission, Aluminium no 8 3715.00 29720.00

body, polyester white powder coat applied over a 5-stage pre-treatment,

Prismatic diffuser for glare-free uniform light, UGR<19, Electronic control gear

Protection class I, IP40, L =1195mm, B = 295mm, H = 67mm, PH = 1500mm

Supply, Installation, Testing and Commissioing of Round shaped Recess

Mounted/Surface Mounted Fixed type COB LED Ceiling Downlighter

Luminaire with Translucent Cover with system power: 12W, Luminous flux of

luminaire 1200 lm, direct light emission, CRI > 80, 230V constant current

driver, 70% of luminous flux after 50,000 operating hours, Housing made up

of Die-cast Aluminium along with aluminium reflector with energy efficient

LEDs enclosed with Clear PC diffuser for safety with Dia. 82mm & Height

78mm, efficacy 100Lm/W with beam angle of 36 degree beam angle. Power

Factor of more than 0.90 & CCT - 4000K/5700K, Powder coated White/Black

coloured, Internal wiring along with Integral Driver having an in built Surge

Protection of 2.5kV, Protection class II, IP20.

Supply, Installation, Testing and Commissioing of Linear Suspended mounted

LED Ceiling luminaire with Up-Downlight distribution with Dark Lens for Direct

Lighting & Opal diffuser for Up Lighting having system power: 28W/4ft. (8W

Up, 20W Dn), Luminous flux of luminaire 2100 lm/4ft, Direct-Indirect light

emission, CRI > 80, 230V constant current driver, 70% of luminous flux after

50,000 operating hours, energy efficient LEDs integrated with Dark Lens

micro reflector louvres for high efficiency with 80 degree beam angle giving

UGR value less than 19 for Down Lighting, limited luminance for beam angle

above 65° all around giving Direct glare limitation in accordance with UGR <

3 MR 19 & Opal diffuser for homogenous light distribution for Up lighting, Luminaire no 29 4869.00 141201.00

housing profile in extruded aluminium with end caps with efficacy of 75Lm/W,

Suitable for Individual Installation, Power Factor of more than 0.90 & CCT -

4000K/5700K, Powder coated White/Black coloured, Internal wiring along

with IntegralDriver having an in built Surge Protection of 2.5kV, Sliding/fixed

adjustable wire suspension, Protection class I, IP20. L = 1145mm, B = 44

Supply, Installation, Testing and Commisioning of Recessed downlight with

LED (Light Emitting Diode) system power: 5W, Luminous flux of luminaire 400

lm, Colour temperature of 4000 K, Warm white, CRI > 80, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours; energy-

efficient LED, direct light emission, housing in die-cast aluminium, Polyester

5 MR powder white coloured coat applied over a 5-stage pre-treatment ceiling trim, no 39 1025.00 39975.00

with reflector, beam angle of 24°, Electronic control gear, Protection class II,

16 Digitally signed by AMIT

Supply, Installation, Testing and Commisioning of Pendant Linear Track

luminaire with spots, System power: 24W (2 x (2 spots (in 300mm) of 6W

each), the luminous flux of 2160 lm, 4000K, Neutral white, Direct light

emission, 230V constant current driver, 70% of luminous flux after 50,000

6 MR operating hours, Aluminium profile powder coated White/Black, Electronic no 2 9609.00 19218.00

Control Gear, Protection class I, IP 20 L = 1000 mm, B = 52 mm, H = 75 mm,

2 x 2 Spots in 300mm, Blankers 400mm (1 nos.)

TOTAL 398744.00

17 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2018 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1.0 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 36 16415.00 590940.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER

not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

2 2.0 necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High

wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low

noise fan/ dynamically balanced blower, multispeed motor, coil section with DX copper coil,

electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary

3 3.00 accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply,

complete as required. The unit shall have automatic force shut down provision in case of fire

on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet

conditions of 27 Degree C DB and 19 Degree C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

4 4 Joints i.e. Refnet Joints/ Header with Insulation for refrigerant piping

Digitally signed by AMIT

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

5 5 complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

5.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 140 245.00 34300.00

5.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 331.00 66200.00

5.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 140 466.00 65240.00

5.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 200 588.00 117600.00

5.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 707.00 35350.00

5.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 865.00 43250.00

5.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1022.00 20440.00

5.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1108.00 22160.00

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

Supply, installation, testing and commissioning of PVC drain water with necessary clamps,

8 MR fittings such as bends tees etc. and duly insulated.

40 mm dia (9 mm thick insulation) Rm 510 374.00 190740.00

Total HVAC WORKS 1613173.00 360665.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO DSR/ Description UOM Qty Rate DSR Amount Non-DSR Amount

A. MR UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz,

1.53.1) Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack Side end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

6 MR information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG Nos. 26 400.00 10400.00

U/UTP Patch Cord Blue, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

7 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 26 950.00 24700.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

9 MR information outlet (I/O) to Rack End Redantant device connectivity.High Speed Nos. 13 400.00 5200.00

Gigabit 24AWG U/UTP Patch Cord Yellow, LSZH, C6, 2M (Yellow)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active Redandant

SITC of 04 core OM4 Multimode fiber orange color 50/125, minimum bending radius

13 MR SITC of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to pigtail, 1m. Set 2 247.50 495.00

14 MR SITC of 16U Rack Each 1 25,000.00 25000.00

B. UTP Components for VOICE

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz,

1.53.1) Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack end. Keystone Unshielded Outlet, 180DG C6, (Ivory)

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

7 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 16 950.00 15200.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

20 Digitally signed by AMIT

Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered Face

8 MR Plate white for I/O fixing at user side Nos. 16 275.00 4400.00

C. 200 Pair MDF Box

1 MR 20 Pair MDF Box with mounting Frame Nos. 1 2500.00 2500.00

3 MR 25 Pair Riser Cable Mtr. 20 1253.00 25060.00

D UTP Components for Wifi

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz,

1.53.1) Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, White

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack end. Keystone Unshielded Outlet, 180DG C6, White

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

5 MR information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 2 400.00 800.00

Gigabit 26AWG Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

6 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 2 400.00 800.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

7 MR Face Plate white for I/O fixing at user side Nos. 2 147.00 294.00

E UTP Components for CCTV

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for

(DSR Connectivity of Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz,

1.53.1) Class E, 23 AWG, Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, White

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack end. Keystone Unshielded Outlet, 180DG C6, White

Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

5 MR information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 1 400.00 400.00

Gigabit 26AWG Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

6 MR information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 3 950.00 2850.00

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

7 MR Face Plate white for I/O fixing at user side Nos. 3 147.00 441.00

GRAND TOTAL (A+B+C+D+E) 83220.00 219440.00

GRAND TOTAL (A+B+C+D+E) 83220.00 219440.00

21 Digitally signed by AMIT

S No Description UOM Qty Rate DSR Amount Non DSR Amount

A. Active Component for Data, Wifi

Supply instllation testing and commissioning of Access Switch of 24 x 10/100/1000

POE+, 4 x SFP+ , 370W PoE, Switching Capacity of switch is of 176 Gbps having

Forwarding performance (64-byte packet size): 130 Mpps, Secure Shell (SSH),

1 RADIUS, TACACS + DRAM 2GB , Flash 2GB , 10K IPv4 Routes ,1K multicast Nos. 2 128000.00 256000.00

Routes ,16K MAC address , 16K flow entries L3 Protcols like OSPF , PBR, MACsec,

PIM , QOS from day-1 , As Approved by NSL Incharge.

2 Supply, Installation, Testing & Commissioning of SFP Modules 10G. Nos. 4 49920.00 199680.00

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing

requirements of wireless networks by delivering a better user experience. The 1830

3 Series extends support to a new generation of Wi-Fi clients, such as smartphones, Nos. 2 68820.00 137640.00

tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave

4 Providing and laying of LC- LC multimode OFC type patch cord for data and voice. Nos. 2 3850.00 7700.00

Total : A - Active Component for Data, Wifi 601020.00

22 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

TOTAL AMOUNT TOTAL AMOUNT

TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265

Vandal Proof Dome camera with 1/2.7” CMOS Motorized vari-

focal, Smart IR, up to 40m; Smart IR, IR On/Off Control

Auto/Manual, Focal Length 2.7 mm–13.5 mm, AI Analytics Line

Crossing; Area Crossing; Area Enter/Exit Detection; Motion

Detection; Region of Interest, Video Compression H.265+;

H.264+; H.265; H.264; H.264B; MJPEG, Resolution

WDR(120dB), BIS Approved;

CE-LVD: EN62368-1 CE-EMC: Electromagnetic Compatibility

Directive 2014/30/EU; FCC: 47 CFR FCC Part 15, Subpart B; On

Supply, Installation, Testing and Commissioning of 8 Ch

Embedded Network Video Recorder with2-channel VGA, 2-

channel HDMI video output, AI disabled: 384 Mbps incoming, 384

Mbps recording and 384 Mbps outgoing AI enabled: 200 Mbps

incoming, 200 Mbps recording and 200 Mbps outgoing, Smart

2 MR H.265+; H.265; Smart H.264+; H.264; MJPEG, HTTP; HTTPS; Nos 1 33311.00 33311.00

TCP/IP; IPv4/IPv6; RTSP; UDP; SNMP; NTP; DHCP; DNS;

SMTP; UPnP; IP Filter; PPPoE; FTP; DDNS; Alarm Server; IP

Search Multicast; P2P; Auto Registration, ONVIF

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category

3 MR Only complete etc as required.etc.all complete. Nos 1 21140.00 21140.00

SITC of 43" Professional Ultra HD Display Panel, 4K UHD

(3840x2160) Resolution, Brightness 400 Nits, Dynamic Contrast

Ratio: 500000:1, Viewing angle (horizontal / vertical): 178 / 178

degree, Display Colours: 1.07 Billion, Panel technology: IPS /

4 MR Direct LED, Contrast ratio (typical) 1200:1, Connectivity: Video Nos 1 44841.00 44841.00

Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Audio Out, COntrol:

RS232, Ethernet, 2x10W Built-in speakers, BIS Certified etc all

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. Nos 1 8968.00 8968.00

Total : A - CCTV 167834.00

23 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO TOTAL AMOUNT TOTAL AMOUNT

DSR NO TOTAL AMOUNT TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog

1 17.2.4 addressable photothermal detector complete with mounting base No 54 2858.00 154332.00

complete as required.

Supplying, installation, testing & commissioning of response indicator on

surface/recessed MS Box having two LED, metallic cover complete with

all connections

Supplying, etc as required.

installation, testing & commissioning of intelligent addressable

thermal detector with rate of rise cum fixed tempreature thermistor

Supplying, base as required.

installation, testing & commissioning of fault isolator complete

4 17.2.7 with base as required. No 6 3270.00 19620.00

Supplying, installation, testing & commisssioning of intelligent

5 17.2.6 addressable programmable sounder complete as required. No 1 2651.00 2651.00

Supplying, installation, testing & commissioning of addressable fire

6 17.2.10 control module complete as required No 1 3003.00 3003.00

Supplying, installation, testing & commissioning of addressable phone

7 17.2.11 control module complete as required. No 1 3267.00 3267.00

Supplying, installation, testing & commissioning of addressable manual

10 17.2.14 call point complete as required. No 1 3871.00 3871.00

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling

12 17.3.2 speaker complete as required. NOS 18 965.00 17370.00

Supplying, installation, testing & commissioning of digital audio amplifier

13 MR 75 Watt, 24-25V rms operating at 240 Volt AC Supply complete as NOS 1 35000.00 35000.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V

14 17.5.2 rated with annealed copper conductor having XLPE insulation, steel wire Mtr. 648 173.00 112104.00

armouring & FRLS outer sheath complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper

17.5.3 conductor cable in the existing surface / recessed steel conduit of

15 following pairs, cores and size including connections and

17.5.3.2 interconnections

cable Two as required.

pair, 2-core, 1.5 sqmm Mtr 270 89.00 24030.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along

16 17.5.4 with all ancillaries and accessories like coupler etc. as required. Metre 270 53.00 14310.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with

2hrs power Battery backup complete as required.

Digitally signed by AMIT

Sl.No. Item Description Quantity Units Rate Amount

Supply Installation, Testing and Commissioning of

Server Based EPABX Fully Computerized IP System,

SIP Compliant. 2U Rack Mountable,Expandable upto

2000Ports.and configured as for below Ports

P & T(CO Trunk) Line 08 Nos.

1 PRI(30 Channel) 1 Nos. 1.00 Lot 410000 410000

IPExtension Circuit 6 Nos.

Digital Extension Circuit 4 Nos

4Analog Extension Circuit 160 Nos

2 Supply Installation and Commissioning of centralized

Operator Console with all dignostic Software of IP

3 Supply Installation, Testing and Commissioning of

Integrated Viocemail System 4 Level IVR software with

6 different languages and 4 time schedule(As per 1.00 NOS 32000 32000

Supply Installation Testing and Commissioning of

Digital Phone (6Key)Backlit keypad Hands-free, full

duplex Headset support Easy to use soft keys/LCD

4 prompts Directory dialling Navigation wheel Call history 4.00 NOS 12800 51200

, Backlit LCD screen,Bluetooth support

(BCAZ),Security lock key XML open interface.

Supply Installation Testing and Commissioning of IP

Phone (12Key)Backlit keypad Hands-free, full duplex

Headset support Easy to use soft keys/LCD prompts

5 Directory dialling Navigation wheel Call history , Backlit 7.00 NOS 16500 115500

LCD screen,Bluetooth support (BCAZ),Security lock

key XML open interface.

6 Supply Installation, Testing and Commissioning of

Analog Speaker Phone with backlight. 160.00 NOS 1550 248000

TOTAL AMOUNT OF EPABX SYSTEM 900700

TOTAL AMOUNT OF EPABX SYSTEM 900700

25 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: ACCESS CONTROL

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation,Testing and commisioning of Biometric and RFID

based Access terminal, RFID Supported (125kHz EM & 13.56MHz

MIFARE, MIFARE Plus, DESFire/EV1, FeliCa), Mobile Card

(NFC/BLE), 30,000 (1:1 User based), 5 Faces/ User Capacity,

5,000,000 Text Logs, 2" TFT Screen, 24 bit Voice DSP with

ECO Cancillation, Eternet, RS 485, Weigand Supported, Complete as

Supply Installation Testing & Commissioning of Access Control

Software including Time Attendance Multi Reader and controller

confuguration and upgradable to Enterprise level with unliimited users.

Databse Supports: MS SQL, Oracle, and MS Access database types.

Type of technology supports: IRIS Sacnner, Biometric, Face, RFID ,

2 MR etc supports template management , Highly secured communication Nos 1 76,125.00 76,125.00

with server,Allows for real- time monitoring of system status and user

activities with optional audio alerts. tamper detection, network

communication loss, and many other system attributes.

SITC of Access IP Master Controller with Enclosure & Power Supply-

1 door Universal 2 Reader TCP/IP Controller Expandable upto 4

Reader with exit reader module,4 Programmable inputs & 4 outputs

3 MR 100 mA MAX ),Temperature: 0 to 70°C (35 -150°F); Humidity: 20 to Nos 2 45,020.00 90,040.00

80% RH (non-condensing) , 3000 USERS & 3000 transactions,2

Supply, Installation, Testing & Commissioning of 12V, 5 Amp. SMPS

4 MR with MS Box Certified. Nos 4 1,198.00 4,792.00

Supply, Installation, Testing & Commissioning of Smart card

Frequency Excitation (13.56 MHz) Mifare/I- class technology smart

5 MR Card. Memory Type EEPROM,Complies with ISO/IEC standards for Nos 50 153.00 7,650.00

thickness. Lifetime Warranty.

Supply Installation Testing and Commissioning of double leaf/ single

6 MR leaf 600 LBS Door Electro Magnetic Lock with complete compatiable Nos 4 4,378.00 17,512.00

Bracket UL Listed.

Supply Installation Testing and Commissioning Touchless Request to

7 MR Exit button with detection range from 4 to 12 cm. Nos 4 912.00 3,648.00

Supply Installation Testing and Commissioning Fire Exit panic Bar

8 MR single/double Door with EM lock and required accessories all included Nos 4 14,623.00 58,492.00

Supply Installation Testing and Commissioning Emergency Door

9 MR Release Button, Gree, Key Resettable, DoublePole Double Throw. Nos 4 659.00 2,636.00

Supply Installation Testing and Commissioning of 8 Core-conductor20

Total in INR 0.00 3,30,315.00

26 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

DSR 2022/ AMOUNT

S No DESCRIPTION QTY UNIT RATE

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

1 wall/ceiling with suitable clamp/support frame and

painting with two or more coats of synthetic enamel paint

of required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

2 centigrade with required accessories :

18.21.1 Pendant type 53 Each 522.00 27666.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of stainless steel

complete with 15 NPT on reducer thread with maximum

working pressure of 175 PSI test pressure of 875 PSI

3 18.25 (Burst) with branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread with

reducer, nipple, 2 side brackets, center bracket, stockbar

of following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 1 NOS 12912.00 12912.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

Schedule of Quantities: AV System

DSR TOTAL TOTAL AMOUNT

DSR TOTAL TOTAL AMOUNT

S No DESCRIPTION Qty Unit RATE

2022/ MR AMOUNT (DSR) (NON_DSR)

Supply, installation, testing and commissioning of Screen Size 85, Brightness (cd/m²) 500, Contrast

Ratio5000:1, 1500 peak nits, Full Array LED backlight, 4K, Smart Android, 24*7, 120 Hz Refresh Rate,

Chromcast & AirPlay inbuilt, 32Gb storage, Dynamic Contrast Ratio700,000:1, Response Time (ms)6.5,

Display resolution (H x V, pixels)3840 x 2160, HDR (High Dynamic Range) compatibility Yes

(HDR10,HLG,Dolby Vision), Aspect Ratio16:9, Dimming typeLocal Dimming, Display DeviceLCD, Panel

1 MR TypeVA, Backlight typeDirect(Full Array LED), Color gamut (DCI-P3)95%, Picture Processor Cognitive 1 Nos. 5,80,000.00 5,80,000.00

Processor XR, Operation time24/7, Deep Black Non-Glare coatingNo, Haze (%)2%, Video ProcessingXR 4K

Upscaling, Motion enhancerXR Motion Clarity, HDMI Signal4096x2160p(24,60Hz),

Supply installation testing & commissioning of 55" Android 9.0 or higher panel with 3840 X 2160 resolution

Professional Ultra HD Display Panel, 4K UHD or better,Processor: Quad core A55 1.2 G Hz, Multi-Core Mali-

G52, 2GB DDR,FDM:32 GB eMMc,Wifi: 802.11 b/g/n 2T*2R, Pixel pitch (mm):0.31 x 0.31 MM,Brightness:

450 Nits or higher, Contrast Ratio: 1200:1, Aspect Ratio -16:9, Response Time (ms) -8 ms or lower, Display

Colors -1.07M or higher, 24x7 operation, Viewing Angle-178°/178°, Inputs:HDMI 2.0 (x2), USB 2.0 (x2),

Output:DisplayPort 1.2 (x1), HDMI 2.0 (x1), Multimedia support: 3GP, MKV, MP4, VOB,BMP, GIF, JPEG, JPG,

PNG,AAC, M4A, MP3, WMA,MP1, MP2, IO Ports: USB2.0, Orientation-Portrait and Landscape both, Inbuilt

speakers-2 x 10 W,Compliance: CE, RoHS, BSMI, BIS,CB, CCC, CU, EMF, EnergyStar 8.0, ETL, FCC, Class

A, PSB, VCCI, Complete in all respect

Cable Cubby with flip top, cover and 6 Pass Through Holes for multi-format cables, 2 Universal Power Socket ,

1 HDMI, 1 USB-C for Data Transfer, made of aluminium etc all complete

Supply, Installation, Testing and Commissioning of Wireless Delegate/Chairman Microphone unit with Highly

directional/cardioid dual band gooseneck mic of 400 mm or more. The microphone shall have frequency

response in between audio range 100 to 20,000 Hz, Dynamic Range>80 dB SPL or better, Signal‐to‐Noise

Ratio>70 dB. The microphone unit is combined with a wireless conference unit for delegate/ chairman with

single‐use and chairperson can be configured via the PC configuration software application, produce crystal-

clear sound due to a very high signal-to-noise ratio and smart frequency selectionm 4 inch or more capacitive

multi-touchscreen, The unit should have Voting License software for each delegates/chairman units. Built‐in

Near Field Communication (NFC), contactless tag reader, the unit shall have inbuilt language of

hindi/devnagri, Identification functionality, voting features, Dual use, Audio mute button, supports wireless, star

and loop-through connection, speech intelligibility, Crystal‐clear sound, the loudspeaker and microphone can

be active at the same time to facilitate a face‐to‐face meeting experience. A feedback suppressor is built in or

external to prevent acoustic feedback, Encryption ensures that information within the system remains

confidential, A socket should be provided to connect the pluggable microphones, The device has a headphone

connection and volume control with 3.5 mm (0.14 in) headphone sockets stereo jack type, a RJ45 compatible

connection for system, communication and power, Hot Plug-and-play, THD at nominal level < 0.1 % or less ,

Dynamic range > 80 dB or better The conference microphone unit shall also have provision of appropriate

charging station/s capable to recharge all the battery simultaneously. BIS certificate to be submitted with the

Bid. The wireless unit also have rechargeable Li-Ion battery for the conference wireless unit, the battery of

wireless mic has operation time of minimum 10 Hr.

28 Digitally signed by AMIT

Supply, Installation, Testing and Commissioning of access point controller solution for wireless conference

unit, The solution shall be capable of Controling wireless conference units. The receiver unit shall have Bi-

directional wireless connection provides audio to and from conference units and enables real-time control of

all settings Operates in 2.4 GHz / 5 GHz frequency bands, including DFS spectrum and have Automatic

frequency coordination, interference detection and avoidance, Dante digital audio also capable of Analog

audio input and output (XLR)/Pheonix connector , should enable look at me functionality, One Ethernet cable

for audio, control, and PoE power, AES-128 or better wireless encryption for enhanced privacy, LEDs indicate

power, wireless connection, and network status , Includes wall / ceiling mounting plate, hall have have internal

5 MR Recording capability, shall have ON/OFF Power,System Volume,Recording Indicator LED etc, Network based 1 Nos 2,09,000.00 2,09,000.00

Server application with User-friendly Interface, shall have 1 x Balanced XLR audio input, 1 x Balanced XLR

audio output, 2 x Unbalanced audio outputs.Should have Dante connectivity. Audio Routing, Network

Monitoring, built-in Diagnostics application and camera control, should have RS232 or similiar ports for third

party control. It shall have flexibility to attach wireless conference units as well if required in future. Supports

interpretation with 63 + floor through different licenses, inbuilt DANTE network card for Audio over IP for future

seamless integration. BIS certificate to be submitted withthe bidshould have capability to do audio zoning for

upto 4 zones or more with capability to set audio parameters for these zones individually etc all complete

Supply, installation , testing & commissioning of 20X PTZ camera with hdmi, USB, LAN connecticity,

rs232/485, should be compatible with conference system for look at me functionality, BIS, CE,FCC, ROHS to

be submitted with the BID.

Supply, Installation, Testing & Commissioning of charging station for 10 Batteries - Charger can

simultaneously charge up to 10 Battery Packs. The charging status of each, Battery Pack is shown on

individual charge capacity LED indicators. The Battery Packs can be left in the Charger when fully charged.

This has no impact on charging level and lifetime of the Battery Packs. The Charger is intended for wall

8 MR mounting The loop-through mains power supply sockets allow a maximum number of chargers to be 2 Nos 65,000.00 1,30,000.00

connected in series so that they can share the same mains power supply outlet: Recharges from empty in less

then 03 hrs ,auto rating power supply 100-240V , A maximum of 5 chargers can be connected in series for,

charging capacity LED indicators, network based monitoring software included for battery pack.

Supply, installation , testing & commissioning of Soft codec AV bridge with 1hdmi INPUT, automatic scaling of

input video signal, input audio in, bridging for audio and video signals for connecticity to all major video

conferencin applications including Zoom, meet, MSTeams etc

Supply, installation , testing & commissioning of 4X4 audioDigital signal processor, 48KHz processing, AEC,

Supply, installation , testing & commissioning of ceiling speaker 6.5" coaxial 1.5" tweeter, 30/15/ watt,

Supply, installation , testing & commissioning of class-D 2 channel amplifier with 500 watt on each channel

Supply, installation , testing & commissioning of 1.5SQMM 2 core speaker cable

Supply, installation , testing & commissioning of cables and connectors for above set up

29 Digitally signed by AMIT

SCHEDULE OF QUANTITIES-ART WORKS

S NO MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON DSR (INR)

Mixed media mural Wood/ Metal/ Fibreglass/ Terracotta / Tiles or

1 MR anything other medium artist find suitable as long as it is sq m 5 6000.00 30000.00

permanent in nature.

Providing and fixing theme artwork/ any other as per direction and

site requirement from the local artisans as per the selection of the

2 MR client and the architect.

Panels of various sizes No. 10 3000.00 30000.00

TOTAL ART WORKS 0.00 60000.00

30 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FURNITURE

Item Specifications Qty Rate Amount

Providing and Placing Main TAble of Size 2400x2100.MAIN WORKTOP Size 2400x900x740mm, ERU

1200x450x610mm. similar to Main worktop - Made of 43mm Thick (±1) combination of MDF and particle board with top

veneer face coated with clear lacquer. All edges are edge banded with matching 1mm thick veneer lipping.LEATHER

PAD:Made of 18mm Thick (±1) MDF with Leatherette wrapped around top surface. This leather pad is fixed to main top

panel.DRAWER UNIT:Top panel and drawer unit modesty panel is made of 43mm Thick (±1) combination ofMDF and

particle board with top veneer face coated with clear lacquer. All thickness edges are edge banded with matching

lipping.Remaining construction is of 18mm Pre-laminated twin board (PLT) of E1-P2 grade and approved shade

confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Bottom panel of drawer is 9mm

thick particle board with leatherette on top surface.Drawer unit is provided with soft closing channels for smooth

opening and closing.Drawer unit is secured with side central lock.OPEN STORAGE UNIT:Top panel and open storage

unit modesty panel is made of 43mm Thick (±1) combination of MDF and particle board with top veneer face coated

Chairperson Room with clear lacquer. All thickness edges are edge banded with matching lipping.Remaining construction is of 18mm Pre-

laminated twin board (PLT) of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with 1 178400 178400

matching 2 mm thick PVC lipping.MODESTY:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and

approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Modesty is fitted

with aluminum trims.UNDERSTRUCTURE:Made of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and

approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with

soft closing hinges and handle is provided for ease of opening.Also lock is provided on side panel for security.ACCESS

FLAP WITH POWER BOX:Soft closing access flap with power box contains 3 Universal Sockets, 2 USB power points,

1 HDMI connection, 1 inbuilt misc. cable grommet and CAT 3 and CAT 6connections.

Providing and placing Back unit of size 2400mm(L)x470mm(D)x2325mm(H).CONSTRUCTION AND MATERIAL similar

& equivalent to: Made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm

CRCA for 600W and 0.8mm CRCA for 1200W), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and

End Cover(0.5mm CRCA). Shelves are 12 bend panel made of 0.7mm Thick CRCA (D Grade, IS-513). 4 nos of

shelves for 1950H and 5 nos of shelves for 2325H back unit. Storage body is powder coated with Epoxy Polyester to

the thickness of 50 microns (+/-10 micron).VENEER DOOR:

Made of 12mm Thick (±1) MDF with 3.5mm veneer both side and face coated with clear

lacquer. All edges are edge banded with matching 1mm thick veneer lipping. Door is

Chairperson Room

provided with soft closing hinge. Handle is also provided for ease of opening. Storage is 1 62320 62320

secured with 3 way cam lock.GLASS DOOR:

Made from the combination of aluminium alloy (63400) extrusion and 4mm clear

toughened glass. Aluminium extrusion of glass doors are powder coated with Epoxy

Polyester to the thickness of 50 microns (+/-10 micron). Handle is provided for ease of

opening. RH Glass Door is provided with 3 way cam lock for security.

31 Digitally signed by AMIT

Providing and placing High Back chair.SEAT ASSEMBLY similar to: The Cushioned seat inner is made of injection

moulded glass filled poly-amide. Upholstered seat sub-assembly consists of moulded High Resilience (HR)

Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat

SIZE: 45.5cm. (D) x 52.4cm. (W) 2. BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene

Injection molded Plastic Inner. *HIGH BACK SIZE: 50.5 cm. (W) x 76.7 cm. (D) Height adjustment sub assembly is

inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. ·

Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, 12°±2° swivel inside ·

Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top To - Fro Adjustment- any position

(4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-amide inner.

MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. · Forward

tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt

limiter. . SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the

mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment

Chairperson High range is of 5.0±0.5 cm. 6. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast

Back Chair aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be

adjusted in the range of 7.5±0.5 cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height

adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with

buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL

CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel

Diameter and assembled to pedestal.

Providing and placing mid back Chair .SEAT ASSEMBLY similar to: The Cushioned seat inner is made of injection

moulded glass filled poly-amide. Upholstered seat sub-assembly consists of moulded High Resilience (HR)

Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat

SIZE: 45.5cm. (D) x 52.4cm. (W) 2. BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene

Injection molded Plastic Inner.MID BACK SIZE: 50.5 cm. (W) x 61.8cm. (D) Height adjustment sub assembly is

inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. ·

Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, 12°±2° swivel inside ·

Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top To - Fro Adjustment- any position

(4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-amide inner.

MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. · Forward

Chairperson Visitor tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt

limiter. . SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the 3 85149 255446

mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment

range is of 5.0±0.5 cm. 6. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast

aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be

adjusted in the range of 7.5±0.5 cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height

adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with

buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL

CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel

Diameter and assembled to pedestal.

32 Digitally signed by AMIT

Providing and placing sofa of size 1520mm (W)x 840mm (D)x760(H) similar to Pure Leather Upholstery - Pigmented

Durable and ergonomically perfect for seating. The top grains of leather is clearly visible which adds to the aesthetics

S Spring Webbing- Provides bouncing back action for floating feeling.Construction- Made of solid wood frame with ply

cross section which is moisture , termite and borer resistant. Adequate treatment of wood initiated to enhance longevity

and maintain robustness.PLY - 12 mm, PLY - 6mm flexiply , Paper board 3mm , webbing 2 inch , Zigzag Spring -

Sofa 2 Seater 1 64320 64320

Comfort- The seat is made of soft foam of density 28 kg/m3 which enhances comfort and cushioning with sinking

Ground Elevation- Equipped with legs, the sofa is elevated to allow a level of ground clearance.

Providing and placing centre table of Overall Size : Width : 120cm Depth : 60cm Height : 36.7cm Materials similar to :

All carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom

is made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs :

Rubber wood . Hardware : Hettich . Construction : Knock down .Finish : All 18 mm prelaminated particle board panels

are Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 nos . Materials : All

carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.

Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce 1 21000 21000

Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos

Providing and placing side table of size : Width : 600mm Depth : 600mm Height : 498mm. Materials similar to : All

carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.Drawer bottom is

made of .9 mm thick prelaminated particle board .Drawer front is made of 18 mm thick PU painted MDF . Legs : Rubber

wood . Hardware : Hettich . Construction : Knock down .Finish : All 18 mm prelaminated particle board panels are

Noce Versaillies with walnut edge band. PU lamination is high gloss in Ecru shade .Packets : 1 nos . Materials : All

carcass panel are made of 18 mm prelaminated particle board with edge banding 1.5 mm thickness.

Hardware : Hettich . Construction : Knock down .Finish : • All 18 mm prelaminated particle board panels are Noce

Side Table 2 5440 10880

Versaillies with walnut edge band . PU lamination is high gloss in Ecru shade .Packets : 1 nos

Providing and placing in position discussion table.The overall size of the wortop shall be 1000mm(L)x1000mm(D). x

740mm. similar to Worktop shall be made from 25mm thick MDF one side prelaminate board with 0.4mm PVC

membrane pressed on to top and having chamfered edge. Soft closing dual access flap provided for access to power

supply and data cables. Made of 25mm thick MDF-one side pre-laminate board with 0.4mm PVC membrane pressed

on to top. Gromet provided for wire management. The Under-structure consists of an Inner Tube Assembly with Top for

Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per

Discussion Table IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube 1 35700 35700

Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138)

welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60

microns). The product has a knock-down construction.

33 Digitally signed by AMIT

Providing and placing mid back Chair .SEAT ASSEMBLY similar to: The Cushioned seat inner is made of injection

moulded glass filled poly-amide. Upholstered seat sub-assembly consists of moulded High Resilience (HR)

Polyurethane foam of Density 45±2 kg/m³, and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression. *Seat

SIZE: 45.5cm. (D) x 52.4cm. (W) 2. BACK ASSEMBLY: The Cushioned back is made of PU Foam with Polypropylene

Injection molded Plastic Inner.MID BACK SIZE: 50.5 cm. (W) x 61.8cm. (D) Height adjustment sub assembly is

inserted in the Aluminum Die Cast Arm body & all other adjustment are provided in adjustable arm top sub assembly. ·

Up-Down adjustment has 8 position (10.5±0.5cm range) · Arm top swivel adjustment- 2 position, 12°±2° swivel inside ·

Arm top width adjustment - Any position (2.0±0.5cm range each arm top) · Arm top To - Fro Adjustment- any position

(4.0±0.5cm range) · Armrest top is made up of high density PU molded over glass filled Poly-amide inner.

MECHANISM: The adjustable tilting mechanism is designed with the following features: · 360° revolving type. · Forward

tilt of sesat and back. · Upright tilt lock. · Tilt tension adjustment can be operated in seating position. · 3-position Tilt

limiter. . SEAT DEPTH ADJUSTMENT: Seat depth adjustment is housed below the seat and integrated with the

Discussion Chair mechanism with help of Polypropene Seat cover. Seat Depth can be adjusted in sitting position. Seat depth adjustment 4 85120 340480

range is of 5.0±0.5 cm. 6. ADJUSTABLE BACK SUPPORT: Back Assembly is connected to buff polish die cast

aluminum Spine with an Up-Down mechanism assembly. Back Height can be adjusted in sitting position. It can be

adjusted in the range of 7.5±0.5 cm.PNEUMATIC HEIGHT ADJUSTMENT: The heavy duty class 4 pneumatic height

adjustment has an adjustment stroke of 13.0±0.3 cm. PEDESTAL: The pedestal is made of die-cast aluminium with

buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia.TWIN WHEEL

CASTOR: 5 Nos. twin wheel soft castors are injection moulded in Poly-amide with PU lining, having 6.5±0.1cm wheel

Diameter and assembled to pedestal.

Providing and placing in position of 1 seater sofa. The overall dimensions of the sofa shall be 1460 (W) x 905D x 855H.

similar to The seat should be made of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of

supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK FOAM:

The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of

density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick

hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section

Chairperson Lounge deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

Sofa 2 seater understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube &

plate with plastic endcap.Complete all as per the direction of Engineer in Charge.

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing

with understructure. It shall be a welded assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall

dimensions of table shall be Width of table= 112.0 cm, Depth=60.0 cm, height=35.1 cm.

Centre Table 1 14025 14025

34 Digitally signed by AMIT

Providing and placing in position Corner table. The Glass shall be 10+/-0.3mm thick black tinted toughened glass UV

glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded assembly made in SS202

grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0

cm, height=35.1 cm.

Side TAble 2 9350 18700

Providing and placing in position of main table of main table with overall size of table 1650 x 11650 x 750mm. The

main table shall be of size 1650 x 750 x 750mm. The side unit shall be 900 x 500 x 750mm. similar to the table is made

of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed

on to top. Soft closing access flap within-build power box are provided on work surface for wire management. The ERU

top is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane

pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-

14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated

twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is

Chairperson Support made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm

thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane 1 68000 68000

Staff Main Table

pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel

Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided

for ease of opening. Pedestals are provided with lock for security.

Providing and placing high back chair with headrest. SEAT/BACK ASSEMBLY similar to: The seat is made up of 1.5

±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The

seat has extra thick foam on front edge to give comfort to popliteal area. The Back is injection moulded in glass filled

Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection

mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm.

The chair seat & back size are*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm.

(H)2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2

kg/m³ and hardness 16±2 kgf as per IS:7888 for 25% compression.3. ARMRESTS :The adjustable armrest is designed

with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)

· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled

Chairperson Support Nylon insert.4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the

following features:· 360° revolving type.· 3 position locking with anti shock mechanism. 1 11050 11050

Staff Main Chair

· Tilt tension adjustment5. HEADREST: The Headrest sub-assembly is made up of injectiomoulded glass

filledPolypropylene which is upholstered with moulded HR polyurethane foam and fabric. Ithas an adjustment of 4.0 ±

0.1cm & it is assembled over Thrill mesh back chair.The complete headrest assembly is retro fit to the main chair.

6. PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm..

PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel

castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin

wheel castors are injection moulded in Black Nylon.

35 Digitally signed by AMIT

Providing and Placing mid back Chair .SEAT/BACK ASSEMBLY similar to: The seat is made up of 1.5 ±0.1cm. thick

hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra

thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene

which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection

mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm.The chair seat & back size are

*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)2. HIGH RESILIENCE (HR)

POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf

as per IS:7888 for 25% compression.

3. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ±

0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded

Chairperson Support over glass filled Nylon insert.

4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following 2 10115 20230

Staff Visitor Chair

features:· 360° revolving type.· 3 position locking with anti shock mechanism.]· Tilt tension adjustment PNEUMATIC

HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.

PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel

castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin

wheel castors are injection moulded in Black Nylon

Providing and placing in position of main table with overall size of table 2350 x 2350 x 750mm. The main table shall be

of size 2350 x 1150 x 750mm. The side unit shall be 1200 x 600 x 750mm.similar to The table is made of 25 mm thick

MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft

closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of

25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to

top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with

0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-

P2 grade and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm

thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded with matching 2 mm thick PVC

lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC membrane pressed on

Member Main Table 3 118150 354450

to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer

Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for

ease of opening. Pedestals are provided with lock for security.Complete all as per the direction of Engineer in Charge.

36 Digitally signed by AMIT

Providing and Placing High Back Chair with overall size similar to 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1

– 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is

upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of

16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of

PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette.

The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift

adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome

plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is

designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous

Member High Back lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter

Chair giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC

aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat

depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can

be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic

height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium

& fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos.

of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

Providing and Placing Mid Back Chair with overall size similar to 76.1 cm W x 76.1 cm D x 96.5 – 114 cm H x 43.1 –

53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is

upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of

16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of

PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette.

The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift

adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome

plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is

designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous

lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter

giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC

Member Visitor Chair 9 39610 356490

aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat

depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can

be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic

height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium

& fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos.

of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

37 Digitally signed by AMIT

Providing and placing 2 seater sofa of size of size 1680mm(L)x945mm(D)x930mm(H)Solid Wood Frame similar to.The

sofa frame is made from seasoned solid wood that undergoes multi-step treatment for protection against termites and

Synthetic Leather Upholstery Upholstery used is of high quality synthetic leather which requires little maintenance. All

you need to do is use a piece of cloth to gently wipe the surface. It is resistant to cracking and easy fading increasing

the sofa’s durability.

Member sofa 2 High Grade FoamThree layer of super soft foam is put together with a layer of recron which offers a sinking feeling with

floating comfort to create comfortable seating for long hours 3 39780 119340

Anti-Sagging Nylon webbing of 2 mm thickness prevents the foam from sagging as it ensures superior bounce back

when the weight is removed from the seat.

Ergonomic Support Back rest of the sofa is designed ergonomically to provide an additional lumbar support to keep

your back in its perfect position. The extended angular head cushion provides adequate headrest and enables correct

body posture for long seated hours

Providing and placing centre table of Overall Size : Width : 120cm Depth : 60cm Height : 37.8cmTABLE METERIALS &

SIZE :TOP: SOLID VENEER MDF TABLE TOP WITH 18 mm . LEGS: SOLID RUBBER WOOD.Color : CAPPUCINO

Centre Table 3 10838 32513

Providing and placing Side tableOverall Size : Width : 53cm Depth : 45cm Height : 45cmTABLE METERIALS & SIZE

:TOP: SOLID VENEER MDF TABLE TOP WITH 18 mm . LEGS: SOLID RUBBER WOOD.Color : CAPPUCINO

Side TAble 6 9095 54570

38 Digitally signed by AMIT

Providing and placing desk based workstation with Pedestal, KBPT and CPU trolly .Wokstation size

1500x600x750.The system shall be a desk-based system with a platform understructure made up of a combination of

MS. Tubes and plates. The terminating leg structure shall be in M.S. CRCA sheet/ tubes/rods finished with epoxy power

coating of the approved colour as per the project designer. The terminating legs can be provided with

modesty panels optionally. These modesty panel shall be of Metal 1.2 mm thick CRCA. The legs shall be

provided with translucent glide screws to take care of the levelling as per the site requirements. Worktop shall be made

of 25MM thick Pre-Laminated Board. All the edges of work surface shall be provided with machine pressed 2 mm thick

PVC lipping glued with hot melt EVA glue. The worktop shall be complete with provisions for screen mounting as well

as for wire management on the workstation. Provisions for fixing of the switches shall be on the wire tray/channel. Wire

Workstation fo riser leg or independent wire risers shall be provided as per the layout structure. Screen shall be provided as per the

requirement of the design and layout. The screen finishes can be selected from Fabric, laminated coloured glass, and 8 36210 289680

PA/Support Staff

DL marker board. Fabric screens shall be of 19 mm overall thick, Glass screens are of 8 MM thick. The screens

provided shall be complete with its set of PDC clamps for fixing on the worktop. The screens shall be placed along the

width of the worktop.Pedestal Size 390mm(L)x435mm(D)x646mm(H)

Providing and Placing mid back Chair .SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-

pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra

thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene

which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection

mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm.The chair seat & back size are

*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)*MESH BACK SIZE 51.0 cm. (W) x 70.0 cm. (H)2. HIGH RESILIENCE (HR)

POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45±2 kg/m³ and hardness 16±2 kgf

as per IS:7888 for 25% compression.

3. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ±

0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded

PA/Support Staff over glass filled Nylon insert.

Chair 4. CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism isdesigned with the following

features:· 360° revolving type.· 3 position locking with anti shock mechanism.]· Tilt tension adjustment PNEUMATIC

HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.

PEDESTAL ASSEMBLY : The pedestal is injection moulded in glass-filled Nylon andfitted with 5 nos. twin wheel

castors. The pedestal is 66.1 ±0.5cm. pitch-center dia.(76.1 ±1.0cm with castors). TWIN WHEEL CASTORS : The twin

wheel castors are injection moulded in Black Nylon

39 Digitally signed by AMIT

Providing and Placing in position Conference table for 19 seater and having One Head Module of size 1800xmm x

825mm x 740mm.Worktop- Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade

conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Plastic ABS access flap is provided

for easy access to wires and cables. Work top is available in various shapes.It consist of 18mm Thick Pre-laminated

twin board of E1-P2 grade and approved shadeconforming to IS-12823:1990, Edge banded with matching 2 mm thick

PVC lipping. Aluminium alloy 63400 - WP profile is used for connecting panels together. The product has a knock-down

construction.It consist of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shadeconforming to IS-

12823:1990, Edge banded with matching 2 mm thick PVC lipping. Aluminium alloy 63400 - WP profile is used for

connecting panels together. The product has a knock-down construction.An array of panels made of 0.8mm CRCA MS

IS:513, epoxy polyester powder coated(DFT 40-60 microns) is used for flow of wires and cables. Provision to mount

Conference Table 19

Roma 6 module plate is provided below worktop. Cutout on top with two piece injectionmoulded plastic part polymer

component is fitted to pull out audio,video cables ontoworktop and connect devices charger to power socket below

Providing and Placing High Back Chair with overall size similar to 76.1 cm W x 76.1 cm D x 112.7 – 130.2 cm H x 43.1

– 53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is

upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of

16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of

PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette.

The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift

adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome

plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is

designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous

Conference Room lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter

Main Chair giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC

aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat

depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can

be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic

height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium

& fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos.

of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

40 Digitally signed by AMIT

Providing and Placing Mid Back Chair with overall size similar to 76.1 cm W x 76.1 cm D x 96.5 – 114 cm H x 43.1 –

53.1 cm Seat Height. The seat is cushioned seat made of injection molded plastic outer & inner. Plastic inner is

upholstered with leatherette and molded high resilience polyurethane foam of density 45±2 kg/m³, & hardness load of

16±2 kgf as per IS:7888 for 25% compression. Seat Size is 47.0 W cm x 48.0 D cm. The back is cushioned made of

PU foam with insitu molded M.S. ERW round tube of size 1.9±0.03cm x 0.16±0.0128cm, upholstered with leatherette.

The back size is 47.7 W cm x 76.4 D cm. The armrest top is molded from polyurethane and mounted on to a drop lift

adjustable type tubular armrest support made of Ø3.81±0.03cm x 0.2±0.01cm thick M.S. ERW tube having chrome

plated finish. The armrest is height adjustable up to 6.5±0.5 cm in 5 steps. The adjustable tilting mechanism is

Conferencec Room designed with following features : 360° revolving type, front-pivot for tilt with feet resting on ground and continuous

Visitor Chair/Back lumbar support ensuring more comfort, tilt tension adjustment can be operated in seating position, 5-position tilt limiter 34 21250 722500

Side Chair giving option of variable tilt angle to the chair, Seat/back tilt ratio 1:2, The mechanism housing is made up of HPDC

aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat

depth adjustment range is of 6.0±0.5cm. Back frame is connected to the up/down mechanism in plastic T spine. It can

be adjusted in the range of 7.42±0.5 comfort the comfortable back support to suit individual need. The pneumatic

height adjustment has an adjustment stroke of 10.0±0.3cm. The pedestal is high pressure die cast polished aluminium

& fitted with 5 nos. of twin wheel castors. The pedestal is 65.0±0.5cm pitch centre dia. (75.0±1.0cm with castors). 5 nos.

of twin wheel castors are injection molded in plastic having 6.0±0.1cm wheel diameter and assembled to pedestal.

41 Digitally signed by AMIT

Schedule of Quantities: Signages

S No Description Unit Qty Unit price

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of

required size and shape with arrangement of screws in the letters itself for

mounting on the walls or pasting using Tape. Fixing complete as per directions

of the engineer. The Sizes would be calculated in Sqft as per Logo Design Each 1 25,624.00 25624.00

Tentative Size 42"X60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper

names/ Departments written using plottercut vinyl or laser cut acrylic letters in

approved colour.Inserting provision for changing names .Fixing provision using Each 6 1,281.00 7686.00

double sided tape as required.

Signage Size 12x5 inch

3 TOILET ICONS

Providing and fixing of Acrylic signage made of 5mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper icons

using plottercut vinyl or laser cut acrylic letter in approved colour. Fixing Each 3 1,025.00 3075.00

provision using double sided tape as required.

Signage Size :8 "x 8" inch

4 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet

at base with photoluminescent film self adhesive & colored vinyl ( Red/Green)

Plotter cut and pasted on top. Both side / Single Side facing Complete including

fixing on wall with screws and washers or hanging on ceiling with GI chain/GI Bar

complete as per technical specifications and directions of Engineer.

a Photoluminescent, Fire Hose Reel - 10"x8" Each 1 384.00 384.00

b Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 1 384.00 384.00

c Photoluminescent, Floor Level - 18"x6" Each 1 384.00 384.00

d Photoluminescent, Fire Alarm Call Point - 10"x8" Each 1 384.00 384.00

e Photoluminescent, Fire do not use lift- 10"x8" Each 1 384.00 384.00

f Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 3 384.00 1152.00

TOTAL 39457.00

42 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: HORTICULTURE

S NO DESCRIPTION Total Qty Unit Rate AMOUNT

Supply and Planting Lolina plant having 2-3 ft height

with Coco-peat, mud and manure complete.

Supply and Planting Seaforthia Palm having ht.

90cm to 1.20 m with 6-8 suckers, well developed,

fresh and healthy lush green leaves from bottom to

Supply and Planting Rhapis Palm having ht. 90cm to

1.20 m with 15 to 18 equal suckers, well developed,

full of fresh and healthy leaves from bottom to top

Supply of full soil fill conical shaped planters of

specified volume and dimensions in stone finish or

equivalent. planters to be indigenously made by

rotational moulding, with homogeneous recyclable,

industrial grade polymer-resin mix, and textured

surface. planters should have an integrated water

4 outlet hole & plug, single layered peel-proof

construction, light weight, rust proof, uv stabilized,

anti-frost feature without any joints, and easy to

clean. planter supplier must give 1 year warranty

against any fading or cracking for both indoor and

outdoor use. green plant and laying is extra. potting

instructions as per company catalogue.

7 Artificial Vertical Garden on wall 10 Sqm 2,562.00 25620.00

Plantation: Supply and installaion of Natural Plant

with sand, fertilizer etc.

NET TOTAL 67,920.00

Digitally signed by AMIT