REPAIR TO JOINERY, PAINTING, ROOF TREATMENT, PLINTH, SANITARY FITIING, CEILING ,ATT,HARD STANDING, DRAIN ,CLEANING/REPAIRS OF SEWAGE LINE , ETC AND OTHER MAINT WORK IN AIRPORT AREA ,COTTON GREEN, COLABA AND SION AT AFS MUMBAI UNDER GE AF THANE

Amount

Demolition of brick work or stone/boulder built in lime mortar or cement mortar including all quoins, arches pillars etc but excluding ashlar facing dressed stone work & precast concrete articles for portion ordered to be dismantled and removing debris outside MOD land ,complete all as specified and as directed by Engr-in-charge.

M&L for Pre-cast cement block masonry with solid blocks,10 cm in width and setting in mortar 1:6 concrete 1:2:4 type B1,complete all as specified and as directed by Engr-in-charge.

M&L brick work with sub class ‘B’ bricks straight of curved on plan exc 6m mean radius built in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

Demolition of reinforced cement concrete in any position and in any description not otherwise specifically provided for ,complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced cement concrete (design mix) in M-30 (using 20mm graded stone aggregate) for chajjas or simillar wks ,complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced cement concrete (design mix) in M-30 (using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span ,complete all as specified and as directed by Engr-in-charge.

M&L for formwork with fair finished surface to side of soffits of floors, or roof beam, beam haunchings, girders, bressummers,lintels, cantilevers, shelves incl sup-posts, overhang etc, also splays bet floor and beams etc ,complete all as specified and as directed by Engr-in-charge.

M&L for Reinforced cement concrete (design mix) in M-30 (using 20mm graded stone aggregate) for Columns, pillars, piers,posts and struts ,complete all as specified and as directed by Engr-in-charge.

M&L for formwork to sides of pillars, posts, columns, piers and stanchions in square, rectangular fair finished surface of concrete ,complete all as specified and as directed by Engr-in-charge.

M& L for TMT bars upto and including 8 mm dia in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia for stirrups ,complete all as specified and as directed by Engr-in-charge.

M& L for TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required,including cranking and binding with mild steel wire (anneled) not less than 0.9 mm dia ,complete all as specified and as directed by Engr-in-charge.

Demolition of cement concrete of any description in part portion and part thickness as in hanger floor or any position not otherwise specifically provided for ,complete all as specified and as directed by Engr-in-charge.

Removing demolished materials/debris to a distance exc 13.50 KM and n exc 15 KM and depositing outside MD land ,complete all as specified and as directed by Engr-in-charge.

M&L for Providing cement concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) as in roof kerb or mud stop , rounded or camfered edges, lintels upto 1.50m clear span, cills, steps; seismic and other simillar bands, plinth coarses, parapet wall and railing upto 0.60m height , coping ,kneelers,apex stones ,complete all as specified and as directed by Engr-in-charge.

M&L for cement concrete work in pavement / hard standing of flexural strength 40 kg/per sq cm in field using 400 kg of cement per cum, thickness of concrete 25 cm or less ,complete all as specified and as directed by Engr-in-charge.

M&L for finishing surface fairly smooth without using extra cement ,complete all as specified and as directed by Engr-in-charge.

M & L for forming construction joints 30mm deep X 10mm wide ,GRADE 'A', filled with sealing compund ,complete all as specified and as directed by Engr-in-charge.

M & L for cement concrete 75 mm thick, in sub floor , sub base, floors and pavings cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) ,complete all as specified and as directed by Engr-in-charge.

M & L for cement concrete 25mm thick type B-1,1:2:4 (using 20mm graded stone aggregate) in paving ,complete all as specified and as directed by Engr-in-charge. .

M&L for pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for Drain cover and similar works supported on walls and set in CM 1:4 incl demolition of old cover slab ,complete all as specified and as directed by Engr-in-charge.

M&L in repairs of PU coating in patches , Surface preparation prior to application of polymer mortar or self levelling cementitious using air/water jet after the surface preparation of the entire area/surface, including removing PU coating, clearing of all the marine growth, algae, and other fareign materials like laitance, oil and grease, curing compounds or other surface contaminants which may prevent full and proper adhesion of the primer using mechanical tools like grinder fitted with buffing wheel or similar. All inclusive of hire rate of equipment, consumables and labour charges etc. ,complete all as specified and as directed by Engr-in-charge.

M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of M/s. Fosroc as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application ,complete all as specified and as directed by Engr-in-charge.

M &L for self levelling cementitious compound with average thickness 12mm (Nitoflor levelcrete of FOSROC Make as equivalent) after surface preparation/cleaning of existing concrete surface curing etc. complete as specified and as directed and as per manufactures instructions.

M&L for Providing and applying antiskid flooring system over sound and moisture free concrete / screed surface( Trafficguard UR-150 of FOSROC make as equipment) after proper surface preparation and surface cleaning, application of epoxy primer (Nitoprime-25 of FOSROC make or equivalent) at the rate of 0.2 to 0.3 lit/m², immediately apply Traffic guard UR150 wear course - PU Coating @ 0.2 lit/m² etc ,complete all as specified and as directed by Engr-in-charge.

M&L for Cutting holes into or through brick wall built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 not exceeding 150 Sq cm as required ,complete all as specified and as directed by Engr-in-charge.

Taking down cement plaster of any description on brick walls etc including raking out joints, hacking for key, scrubbing down with water etc ,complete all as specified and as directed by Engr-in-charge.

Rendering 10 mm thick on Brick surfaces in CM 1:6 ,complete all as specified and as directed by Engr-in-charge.

M&L 3mm thick wall care putty on wall ,complete all as specified and as directed by Engr-in-charge.

M & L for preparation of new surfaces on walls / non asbestos fibre building board and applying two coats of oil bound distemper over a coat of alkali resistant primer ,complete all as specified and as directed by Engr-in-charge.

M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement ,complete all as specified and as directed by Engr-in-charge. [Note:- WPC shall be measured and paid separately ]

Supply only water proofing compund ,complete all as specified and as directed by Engr-in-charge.

M&L for preparation of newly plasterd surface of concrete or brick surfaces and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M&L for complete removal of existing treatment on wall and appying 3mm thick wall care putty including apply two coats of oil bound distemper over a coat of primer , complete all as specified and as directed by Engr-in charge.

M&L for washing,rubbing down and stopping of distempered of old painted surfaces of wall and applying Two coats ( having proportion @1.67 Litr/10 Sqm) of acrylic smooth exterior paint of required shade and including priming coat of exterior primer applied @ 2.20 Kg / 10 sqm, complete all as specified and as directed by Engr-in charge.

M&L for cutting out bricks, forming toothing for and bondinng new and old work including of new materials if required entering old walls and jointing and pointing in cement mortar (1:4) complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillet , complete all as specified and as directed by Engr-in charge.

S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and drawing as mentioned in SSR Part-I or as directed by Engr-in-charge at site.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing as mentioned in SSR Part-I or as directed by Engr-in-charge at site.

M&L in repairs for Anodised aluminium snap grid frame work of size (605mm x 605mm ) for false ceiling , complete all as specified and as directed by Engr-in charge.

M&L in repairs for Hangers 6mm dia. G.I. (upto 1200 mm length) size of grid (605mmx605mm ) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.Flat 40x3 mm size 60 mm long and expansion hold fastners 12.50mm dia. 40mm long , complete all as specified and as directed by Engr-in charge.

S & F PVC insulation pannels 10mm thick with EPS stuck to 1mm printed PVC sheet used in lieu of plain PVC sheet placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing as mentioned in SSR Part-I or as directed by Engr-in-charge at site.

Dismantling plain or corrugated steel sheeting,any gauge,thickness, including Nainital or similar pattern roof covering is any position all as specified and removing them outside MOD Land , complete all as specified and as directed by Engr-in charge.

Dismantling of Asbestos cement (corrugated , semicorrugated etc) sheet in roof , wall coverings , complete all as specified and as directed by Engr-in charge.

S&F 6mm thick Asbestos cement, corrugated or semi-corrugated sheets in roofs , walls fixed with L-type or J-type or crank hook bolts. etc , complete all as specified and as directed by Engr-in charge.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.80mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engr-in charge.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.80mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, valley, gutter,fixed with self tapping screws , complete all as specified and as directed by Engr-in charge.

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or crank hook bolt in lieu of screw , complete all as specified and as directed by Engr-in charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for ,complete all as specified and as directed by Engr-in charge.

S&F mild steel Fe-410-W(Gde-E-250)quality-B, Joist, channel,angle,or tee sections, fixed independently,connecting plates, etc,(cut to ordinary lengths I.e.within 20mm of the length indicated), ornamental and intricate design , complete all as specified and as directed by Engr-in charge.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, Fe 410-W (Gde-E-250) quality-B,etc , ornamental and instricate design , , complete all as specified and as directed by Engr-in charge.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 , complete all as specified and as directed by Engr-in charge.

M&L for preparartion of new surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer ,complete all as specified and as directed by Engr-in charge.

M&L for preparartion of old surfaces of steel exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer ,complete all as specified and as directed by Engr-in charge.

M&L for preparartion of old surfaces of steel not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer ,complete all as specified and as directed by Engr-in charge.

Taking down shutters without taking off shutters from frames exc 1.4 sqm but n exc 4 sqm each ,complete all as specified and as directed by Engr-in charge.

Resecuring without taking down chowkhats or frams exc 1.50 sqm but n exc 4 sqm each ,complete all as specified and as directed by Engr-in charge.

S&F in repairs powder coated (minimum thikness of powder coating 50 micron) aluminium frames incl sliding tracks, etc for doors, windows, ventilators, partitions with one or more rebates including jointing cleats for fixing, fittings like hinges, handles and locks, etc ,complete all as specified and as directed by Engr-in charge.

S&F Rubber gasket for aluminium frame for windows, Ventilators etc ,complete all as specified and as directed by Engr-in charge.

S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.14 mm fixed with stainless steel wire staple ,complete all as specified and as directed by Engr-in charge.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane ,complete all as specified and as directed by Engr-in charge.

S&F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work ,complete all as specified and as directed by Engr-in charge.

S&F 5mm thick figured glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work,complete all as specified and as directed by Engr-in charge.

S&F in repairs door closer aluminium (extruded section) body hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg ,complete all as specified and as directed by Engr-in charge.

S & F in repairs floor door stopper of aluminium alloy body 150 mm length, and tounge, anodised, with hard drawn steel spring , fixed in floor ,complete all as specified and as directed by Engr-in charge.

S & F in repairs Mortice lock with two levers (vertical type), brass body 100 mm length of latch ,complete all as specified and as directed by Engr-in charge.

S&F 9mm thick Prelaminated partical board , exterior grade, prelaminated both side with decorative choice laminations for Aluminium doors , Partitions works etc.,complete all as specified and as directed by Engr-in charge.

S & F in repairs Double action floor spring Hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty ,complete all as specified and as directed by Engr-in charge.

S&F in repairs brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys ,complete all as specified and as directed by Engr-in charge.

Demolition of floor or wall tiles, stone slab of any description or thickness laid ,bedded and pointed in any mortar all as specified and removing demolished materials and debris outside MOD land ,complete all as specified and as directed by Engr-in charge.

M&L for Granite (of any type) tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on floor over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes,complete all as specified and as directed by Engr-in charge.

M&L for Granite (of any type) tiles 20 mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 10mm thick in CM 1:4 as backing coat to receive skirting / dado,complete all as specified and as directed by Engr-in charge.

M&L for Machine cut cudappah stone slab 20 to 25 mm thick over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing ,complete all as specified and as directed by Engr-in charge.

M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations ,complete all as specified and as directed by Engr-in charge.

M&L for Vitrified ceramic tiles double charge , dark shade 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes ,complete all as specified and as directed by Engr-in charge.

M&L for Vitrified ceramic tiles light shade 8-10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or colour cement to match.over screed bed or bedding layer of mortar 15mm thick in cement plaster 1:6 for laying floor finishes ,complete all as specified and as directed by Engr-in charge.

M&L for racking , cutting and waste on glazed tiles ,complete all as specified and as directed by Engr-in charge.

S&F coloured Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick in CM 1:6 as backing coat to receive skirting / dado, complete all as specified and directed by Engr-in-charge.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment to match over 10mm thick in CM 1:4 as backing coat to receive floors ,complete all as specified and directed by Engr-in-charge.

S&F in repairs 12 mm thick plywood incl necessary cutting and waste ,complete all as specified and as directed by Engr-in charge.

S&F in repairs 12 mm Partical board, medium density , flat pressed single line layer type or three layer type with BWR type adhesive fixed with screw to timber frame work in ceiling flat or sloping ,complete all as specified and as directed by Engr-in charge.

S&F in repairs 18mm to 19 mm thick prelaminated particle board interior grade, prelaminated both sides with decorative choice laminations fixed with screws to timber frame work ,complete all as specified and as directed by Engr-in charge.

S&F Magnetic catches for cupboard doors No.2 ,complete all as specified and as directed by Engr-in charge.

M&L for Extra over rates for external teak wood lipping 6 mm thick fixed with nails ,complete all as specified and as directed by Engr-in charge.

M&L in repairs (wooden ) fillet work using 2nd class hard wood exc 6 & n. exc 13 sq.cm fixed with screw, plane fillet square, rectangle in section clean swan, secured with nails or brads ,complete all as specified and as directed by Engr-in charge.

M&L in repairs stainless steel 'L' shape soft closing spring hinges for cabinets shutters ,complete all as specified and directed by Engr-in-Charge.

M&L in repairs GI push and pull channel brand of size 20"(51 CM) length for modular cabinets,complete all as specified and directed by Engr-in-Charge.

S&F in repairs Rim latch (125 mm size of latch) with two levers of brass body stone enamelled finish , with brass knob or lever handle ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs aluminium anodised barrel towel bolts of extruded section of length 150 mm ,complete all as specified and directed by Engr-in-Charge.

S&F, in repair, 300 mm Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections ,complete all as specified and directed by Engr-in-Charge.

S&F,in repair, stainless steel butt hinges medium weight SS of size 100 mm by welding to existing frame ,complete all as specified and directed by Engr-in-Charge.

S&F in repair 300 mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate ,complete all as specified and directed by Engr-in-Charge.

S&F in repair, aluminium extruded alloy handles fabricated type anodised of size 150 mm ,complete all as specified and directed by Engr-in-Charge.

S&F in repair hasp and staple safety type of size 100 mm of aluminium anodized ,complete all as specified and directed by Engr-in-Charge.

Re-securing or easing and adjusting without taking down shutters of any description and size ,complete all as specified and directed by Engr-in-Charge.

M&L for fixing 6 mm thick plywood fixed with screw incl necessary cutting and waste ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20 mm dia aluminium anodised tubular curtains rod with powder coated ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs aluminium anodised brackets powder coated to match with rod for curtain rod of 20mm dia ,complete all as specified and directed by Engr-in-Charge.

M&L for Hacking out old broken glass of any thickness, size, quality or description from metal /wooden frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc ,complete all as specified and directed by Engr-in-Charge.

M&L for welding in repairs to roof truss,rafters , purlins,steel gates/ windows / doors exc 2.5 cm but not exc 5.00 cm in length and thickness of metal to be welded exc 9 mm but n exc 20 mm [height of roof truss,rafter / purlins 12m to 15 m] ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs 40 mm dia cupboard knobs fixed with nut, screw and washer of mild steel bright finished ,complete all as specified and directed by Engr-in-Charge.

M&L for Cleaning of PVC tank of capacity exc 250 Ltrs and up to and including 500 Ltrs by flushing out water cleaning & removing of sludge, scale mud etc from wall & floor by rubbing with brushes, cleaning with concentrated hydrochloric acid or caustic soda etc complete & finally washing with fresh water, including writing date of cleaning with white synthetic enamel paint and removing sludge, scale mud etc to a distance not exceeding 50 Metre and depositing ,complete all as specified and directed by Engr-in-Charge.

All as per Srl Item No 103 here-in-above but capacity of tank exc 500 Ltrs and up to and including 1000 Ltrs.

All as per Srl Item No 103 here-in-above but capacity of tank exc 1000 Ltrs and up to and including 2000 Ltrs.

Supply and fix in repairs 500 Liters capacity double layer, rotational moulded, polythylene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including fixing only ball valves ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm size bib tap cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs 15 mm size pillar taps, cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs 15 mm size pillar taps swan neck , cast copper alloy chromium plated, fancy type, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm size brass chromium plated single hole basin mixer for mixing hot & cold water screwed down for iron pipe ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm size stop valve with long shank (consealed type) cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union ,complete all as specified and directed by Engr-in-Charge.

S&F, in repair ,20 mm size gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.

S&F,in repair, brass spindle with nylone washer to existing 15 mm size chromium plated bib taps, Pillar taps, stop cock or angle valve of any type ,complete all as specified and as directed.

S&F,in repair, for 20mm size bib taps, Pillar taps, stop cock or angle valve of any type & size incl replacement of nylon washer , teflon tape etc ,complete all as specified and directed by Engr-in-Charge.

S&F,in repair,15 mm size stop valve of PTMT any colour high pressure screwed for iron pipe, weight not less than 90 gms,complete all as specified and directed by Engr-in-Charge.

S&F ,in repair,20 mm size ball valves [Minimum weight for 20 mm – 210 gms] high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe,complete all as specified and directed by Engr-in-Charge. .

S&F,in repair, grating doom 150 x 150 mm of brass chromium plated, ,complete all as specified and directed by Engr-in-Charge. .

S&F,in repair,PVC connection 15 mm size with PTMT nuts on both end, length 450 mm,complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15 mm size with PTMT nuts on both end, length 600 mm ,complete all as specified and directed by Engr-in-Charge.

S&F ,in repair,15 mm size brass chromium plated shower rose 125 mm dia with or without / swivel joints, fixed in position ,complete all as specified and directed by Engr-in-Charge. .

S&F in repairs 10 Ltr capacity PVC syphonic action type flushing cistern low level with inlet ball valve, float and handle, fixed in position and connecting,complete all as specified and directed by Engr-in-Charge.

S&F in repairs the internal fitting kit, suitable for 10 to 15 ltr PVC low level flushing cistern ,complete all as specified and directed by Engr-in-Charge.

S&F vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock fancy type, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin ,complete all as specified and directed by Engr-in-Charge. .

S&F in repair,plastic water closet seat cover, white or black colour closed pattern with flat bottom ,complete all as specified and directed by Engr-in-Charge.

S&F,in repair, polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks, with washer and bolt locking device etc ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm size brass chromium plated zig zag type connector (coupling) for connecting wall mixer and GI tubing ,complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors including taking up or down connected fitting, fixture ,complete all as specified and directed by Engr-in-Charge.

Taking up or down 20 mm bore steel water tubing including connected fitting, fixture, and disconnection of fitting fixture etc. from tubing ,complete all as specified and directed by Engr-in-Charge.

Re-fixing of 20 mm bore Old serviciable galvanized iron tubing medium grade retrieved from relevent item of Sch A, after cleaning of tube and including all fittings and fixtures fixed to walls / ceiling or laid to floors ,complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore mild steel galvanized water tubing, medium grade with all fitting and accessories complete fixed to walls / ceiling or laid to floors ,complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 32 mm size waste pipe, length 1.20m for wash hand basin / urinal / sink ,complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 40 mm size waste pipe length 1.20m for wash hand basin / urinal / sink ,complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 32 mm size waste coupling of PTMT for wash hand basin / urinal / sink ,complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs 40 mm size waste coupling of PTMT for wash hand basin / urinal / sink ,complete all as specified and directed by Engr-in-Charge.

Supply and fix in repairs Hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 6 mm thick corner glass self with aluminum / SS railing incl brackets for fixing ( size 300 mm x 300 mm ) etc ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 6 mm thick rectangular glass self with aluminum / SS railing incl brackets for fixing ( size 450mm x 150 mm ) etc ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs Teflon tape adhesive sealant length 10 m , width 1.5 cm ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs S&F Stainless steel plate rack , 0.5mm to 1mm thick having size (900 x 760 x 230 mm ) including fixing on wall with brackets etc ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm dia pipe ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs PVC 160 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rbber ring joints fixed to wall ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with ubber ring joints fixed to wall ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) bends 160 mm bore any radius ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC (SWR) bends 110mm bore any radius ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC 110mm bore (SWR) coupler ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20 mm high density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq.cm ,complete all as specified and directed by Engr-in-Charge.

S&F in repairs tubular towel rail, aluminium anodised 20mm dia D type 60 CM long between flanges ,complete all as specified and directed by Engr-in-Charge.

S & F in repairs Toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws ,complete all as specified and directed by Engr-in-Charge.

M&L for preparing old plastered surface of wall including washing, rubbing down and stopping of distempered and painted surfaces, apply two coats of oil bound distemper over wall care putty ,complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of walls and applying one coat of cement base paint ,complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of ceiling etc and applying one coat of washable Oil bound distemper ,complete all as specified and directed by Engr-in-Charge.

M & L for preparation of old decorated surfaces of wall and applying one coat of plastic emulsion paint ,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated steel surfaces and applying one coat of synthetic enamel paint ,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated wooden surfaces and applying one coat of synthetic enamel paint ,complete all as specified and directed by Engr-in-Charge.

M & L for Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, at 300 mm intervals including drilling holes at 45 degree and replugging 12 mm dia holes with cement mortor 1:2 (1 cement :2 coarse sand) to match the existing floors ,complete all as specified and directed by Engr-in-Charge. .

M&L for Anti termite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc in apron ,complete all as specified and directed by Engr-in-Charge. .

Refixing of asbestos cement, corrugated or semi- corrugated sheets in roofs.fixed with L- type or J- type or cranked hook bolts and using necessary scaffolding complete all as specified and as directed.

Dismantling timber scantling 40 sq cm and over in section in any position unframed work complete all as specified and as directed.

M & L Second class HW as in scantiling timber framed and fixed in any position complete all as specified and as directed.

Dismantling unframed work in fillets , rails posts,rafters, purlins etc. under 40 sq. cm in section complete all as specified and as directed.

M&L 2nd class hardwood exc 13 & n exc 25 sqcm plain fillets rails posts,rafters, purlins 'square,rectangular or triangular insection, clean sawn, secured with nails or brads complete all as specified and directed.

M&L for Preparing surfaces of wood and wood based materials, steel and iron work, new or old,of any description and girth,not otherwise described, and treated with tar or coal tar black paint, etc completed all as spd and directed.

M&L hand rails, half round or other steel section or core for wooden hand rail straight portion drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including futting tops to shape as directed drilling holes notching for wire etc flat iron fillets including all necessary drilling bolting or riveting etc and similar work conforming to Fe 290 Gde E 165 complete all as spd and as directed.

S&F rolled sections with ERW or Induction butt weld M.S. tube black conforming to IS 1161-1979 grade Yst 240 as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and as directed.

M&L for preparation of new Gypsum board surfaces on ceiling and filled thejoint gaps with wall care putty. Thereafter, applying two coats of oil bound distemper over a coat of primer , complete all as specified and as directed.

M&L 06 mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium/Steel frame work with screws or like in ceiling, complete all as specified and as directed.

M&L for wire brushing and cleaning top surface of tiles lime terracing or cement concrete, including flashings and junction of parapets etc and surface painting with a layer of blown bitumen of any penetration applied hot @ 1.70 kg per sqm ,complete all as specified and as directed.

M&L for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by torch application includes two coat of aluminium paint ,complete all as specified and as directed.

M&L preparing surfaces of roof old painted surface or previosuly untreated surface applying 1 coats of aluminium paint on old surface ,complete all as specified and as directed.

M&L for two layers plaster on external surfaces of wall, first layer 10 mm thick in CM (1:6) on other than fair faces of brick or concrete surfaces. Second layer (setting coat/finishing coat) 5 mm thick in CM (1:4) with approved water proofing compound with sand texture finish ,complete all as specified and as directed.

S&F plain alluminium sheeting alloy 31000 H4 to bottom of wooden shutter,complete all as specified and as directed.

Cleaning the existing holes on AC sheets and fixed M seal, washer etc to stop the leakage to the entire satisfaction of Engr-in-charge.

Removing & Cleaning of existing Cover concrete carefully by low impact high frequency hammer without damaging the existing concrete including cleaning the surfaces by air jet etc. ,complete all as specified and as directed.

M&L for Providing and applying Alkaline rust remover to the existing reinforcement and cleaning the reinforcement clearly with the wire brush ,complete all as specified and as directed.

M&L for Providing and applying the zinc chromatic primer on existing reinforcement with the brush in two coat ,complete all as specified and as directed.

M&L for repairing spalled concrete by self compacting, ugh early compresive strength (3days 30 Mpa & 7 Days 50 Mpa minimuim) concrete upto 50mm thick by pouring in suitable form work usung funnel or hose pipe with water/powder mix as per mfr instructions ,complete all as specified and as directed.

M&L for repairing the damaged concrete portion by average 20mm thick polymer plaster @ a dose of 5% in ratio 1:3(CM) over the exposed non structural member surfaces including making the surface evenly smooth etc as per manufactureres instruction (meaurement on the basis of finished area) ,complete all as specified and as directed.

Disconnecting existing tanks, exc 1000 & n exc 2000, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as spd and directed.

Disconnecting existing tanks,exc 250 & n exc 500, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately),etc completed all as spd and directed.

M&L for 25 mm bore GI Tubing medium grade with all fitting fixed to wall and ceiling in floor complete as specified including taking down existing u/s GI pipe line.

S&F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, Bore dia of pipe in 25 mm, etc complete all as specifed and directed.

S&F,in repair, Rotational moulded polyethylene water storage tanks, triple layered (cylindrical vertical with closed top ) of 2000ltr capacity hoisted and fixed in position ,complete all as specified and as directed.

S & F in repair for Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 25mm-455gms), Bore dia of pipe in 25 mm, etc complete all as specifed and directed.

M&L for RCC in cement concrete (1:2:4) nominal mix (Using 20 mm graded stone aggregate) as in chajjas ,complete all as specified and as directed.

Form work to Chajja and similar items including edge and using scaffolding ,complete all as specified and as directed.

M&L for 5mm thick rendering in cement plaster 1:3 on fair faces of brick or concrete surface of chajjas etc, ,complete all as specified and as directed.

Dismantling of cast iron/AC/PVC pipes100/110mm dia, jointed in cement mortar and taking out of trenches if required ,complete all as specified and as directed.

Removing of vegetation / plantation on the wall of multiple storey building including necessary scaffolding and roots superfacial area n.exc 2 sqm each and making good of surface by applying chemical treatment with GLYPHOSATE 41% including removing /refixing of CI/GI pipe lines,complete all as specified and as directed.(Note : Brick work, plaster and CI/GI pipe lines shall be measured and paid separately)

M & L Writing letters or figures (Block. Roman, Italic or Indian) using thick paint on new or existing surface with and including preparation of wall & necessary scaffolding complete.

M&L for Stops, commas, short lines, dashes, hyphens, brackets etc ,complete all as specified and as directed.

M&L for preparation of plastered or unplastered old surfaces of walls and apply one coat of white wash ,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered or unplastered old surfaces of walls and apply two coats of white wash ,complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered or unplastered old surfaces of ceilings and apply one coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of plastered or unplastered old surfaces of walls and apply one coat of colour wash ,complete all as specified and directed by Engr-in-Charge.

M&L for washing, rubbing down and stopping of distemper and painted surfaces of walls and apply one coat of oil bound distemper, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10 cm in width or girth not otherwise described and apply one coat of synthetic enamel paint ,complete all as specified and directed by Engr-in-Charge.

M&L for preparing old plaster surfaces including washing, rubbing down and stopping of distempered and painted surfaces apply two coats of oil bound distemper over a coat of chalk whitening on ceiling complete all as specified and directed by Engr-in-Charge.

M&L for preparing old plaster surfaces including washing, rubbing down and stopping of distempered and painted surfaces apply two coats of oil bound distemper over wall care putty on ceiling complete all as specified and directed by Engr-in-Charge. Note:- Wall care putty shall be measured and paid seperately.

M&L 3mm thick wall care putty on ceiling ,etc completed all as specified and directed by Engr-in-Charge.

M&L preparation of newly plastered surfaces & applying three coat of white wash on ceilings complete all as specified and directed by Engr-in-Charge.

M&L for complete removal on existing treatment surfaces of wall chajjas etc in any position washing down with water and treating the surface from all loose dirt chalk grease fungi algali flakes etc filling up all cracks and defects with CM 1:3 and applying two coats of external weather coat emulsion paint of approved make and shade incl a coat of weather coat primer all as per manufacturer's instr and directions including issuing scaffolding complete all as directed by GE/Engr in Charge.

M&L for preparation of old surfaces and apply one coat of weather coat emulsion paint of approved make all as per manufacturer's instr and directions including issuing scaffolding complete all as directed by GE/Engr in Charge.

Labour for cleaning of blockage of manholes, gully traps, floor traps, vertical soils/ waste pipe of different dia and sewage lines in the area of the AF Station Mumbai. (Domestic and technical area) by providing and deployment of 02 (TWO) Nos of Labours per day including Sundays and Holidays at Kalina and Santacruz. Note : a) The labour (02 nos) will report daily at 0845 hrs on all working days including Sundays and holidays at complaint cell centre to attend complaints given by Engr -In- Charge . Complaints needs to be cleared within 24 hrs after receiving the complaints. The contractor will deploy requisite labour and supply all T&P ( mechanical Iron rods, knot ropes , bamboo etc.) scaffolding ladders any other materials required to clear the blockages at the site without any extra cost .Labour for cleaning of sludge from sewage lines (any dia) to manhole is included in quoted rates. In case any labour does not report to Engineer In Charge for the whole day or found missing more than half an hour on any day, Panel recovery @ RS.900/- per head per day shall be made proportionally from contractor's dues. b) The recovery will be made from the contractor @250 Rs per complaint which are not cleared within 24 hrs from the date and time of receipt of complaints. Decision of Engr-In- Charge is final in this respect. Two persons will be provided by the contractor at site. The above item includes conveyance cost of labour with their tools to travel from pocket to pocket to attend complaints including removal of sludge from the site outside MOD land to a distance not exc 5km (The department shall not be liable to provide any kind/form of transportation to the labour).

Notes for Srl Item No 207.00 is contd../- (c) Registers of labour attendance and complaints slips shall be maintained by contractor at their own cost, which shall be kept in the custody of MES Department(complaint cell) duly signed by contractor's representative ,JE(civil) and Engineer in charge. (d) The documents viz. attendance register, complaint register, log sheet / record of complaint made / attended shall be maintained separately for each locations / complaint center. (e) The police verification with regard to antecedent and character of tradesmen engaged by the tenderer, shall be carried out by the contractor at his own expenses before obtaining temporary pass on monthly basis. (f) The police verification report, showing names and addresses of tradesmen shall be required to be submitted to the Engr-in-Charge/GE as and when asked for. (g) The contractor shall submit attested copies of necessary safety insurance for subject tradesmen/supervisor employed for the execution of contract.

Opening cover de-watering and taking out sludge from septic tank of any size and removing sludge out side MD land and cleaning the septic tank as per BMC rules and placing cover in original position. Note :- The measurement for the quantity of sludge removed will be arrived by multiplying the inner dimensions of septic tank to actual depth of sludge deposited by dipping the measuring rod. The depth shall be of that wet surface on measuring rod for payment purpose.

Systematically cleaning of pipe sewers/drains by passing rope, knots, bamboos, kempt and disc of required size from manholes to manholes, septic tank and well flushing after cleaning sewer line/drain pipe with water (excluding manholes and septic tanks) including safety measures such as test for existence of poisionous gas etc ,complete all as specified and directed by Engr-in-charge.of the following diameter:-

For 150mm diameter pipe

For 300 mm diameter pipe

Excavation in trenches not exceeding 1.5m ;wide and n.exc 1.5m in depth for foundation etc or shafts. Wells etc not exceeding 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard/dense soil ,complete all as specified and directed by Engr-in-charge

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm ,complete all as specified and directed by Engr-in-charge

Removing excavated material exc.250 Km but not exc 500 mtr or post & deposit in as sirected by Engr-in- Charge

Demolition and breaking up 300mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land complete all as directed by Engineer-in-Charge.

Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land complete all as directed by Engineer-in-Charge.

Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) set in cement mortar and removing and depositing the debris outside MOD Land, complete all as directed by Engineer-in-Charge.

M&L for Cement Concrete bed to drain pipes including packing under including packing under & hunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) bore of pipe is 300 mm ,complete all as specified and directed by Engr-in-charge.

M&L for Cement concrete 1:4:8 type D2 concrete bed to drain pipes including packing under & hunching against the sides of pipes after they are laid and tested for 150 mm bore pipe ,complete all as specified and directed by Engr-in-charge.

-Ditto - as per Srl Item No 217.00 above but for bore of pipe 100 mm dia

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars,for 300 mm dia pipe ,complete all as specified and directed by Engr-in-charge.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars, for 150mm dia pipe ,complete all as specified and directed by Engr-in-charge.

M&L for Reinforced concrete pipes, class NP2, laid and jointed complete with collars, for 100 mm dia pipe ,complete all as specified and directed by Engr-in-charge.

M&L providing reinforced cement concrete 1:2:4, type B1 (20mm graded stone agg) set in Cement morter 1:6 for cover slabs (for manholes etc) ,complete all as specified and as directed.

Supply and fix in repairs of salt glazed stone ware gully traps square or round mouthed type ‘P’ of size 150mmx100mm ,complete all as specified and as directed.

M&L for pre cast cement concrete block masonary with solid block of PCC 1:5:8 exc 10cm in wedth & setting in CM 1:6 ,complete all as specified and as directed.

Taking out existing CI nahani trap 100mm bore & supply & fix CI nahani trap with CP grating 110mm bore as in repairs and depositing it outside MOD Land ,complete all as specified and as directed.

Taking out existing CI nahani trap 75mm bore & supply & fix CI nahani trap with CP grating 110mm bore as in repairs and depositing it outside MOD Land ,complete all as specified and as directed.

M&L for Cement concrete 1:3:6 type c1 (Using 20mm graded stone aggregate) as in coping, for manholes or in roof padding etc including weathering slightly rounded or chamfered angles and throating including necessary formwork as direct by Engineer –in-Charge.

M&L in repair Cast iron floor trap for 75mm diameter of outlet, with grating including jointing to waste pipe in run lead, ,complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches / floors or fixed to walls ,complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) bends ,complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) bends provided with access door ,complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal ,complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) branch pieces,single (single Y) equal or unequal ,complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) junction ,single (single T) equal or unequal ,complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) junction ,single (single T) equal or unequal ,complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) reducers ,complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) vent cowl ,complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) vent cowl ,complete all as specified and as directed.

Genius Construction Co.

M/s Mukesh Engineers

Jay Jyotirling construction co.

askonstruct and supplier