Civil work, Wood work, Tile work and Toilet renovation work in LBS Hostel, B.H.U

Select, At Par, Excess (+), Less (-) IOCL

Tender Inviting Authority: SUPERINTENDING ENGINEER, U.W.D., B.H.U.

Name of Work:- Civil work, Wood work, Tile work and Toilet renovation work in LBS Hostel, B.H.U.

Tender Reference No.:- UWD/2026/12012026-3

Sl. No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category

0.00;[Re31]0.00 Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineer-in-charge. (23.9) Each 0.00;[Re30]0.00 Excess(+) Full Conversion INR

0.00;[Re1]0.00 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (4.1.8) Cum 0.00;[Re25]0.00 Excess(+) Full Conversion INR

0.00;[Re2]0.00 Providing and fixing sheet covering over expansion joints with iron screws as per design. Aluminium fluted strips 3.15 mm thick. 200 mm wide (5.29.2.2) Metre 0.00;[Re22]0.00 Excess(+) Full Conversion INR

0.00;[Re3]0.00 Providing and filling in position bitumen mix filler of proportion 80 kg. of hot bitumen, 1 kg. of cement and 0.25 cubic metre of coarse sand for expansion joints. (5.27) Cum 0.99;[Re28]0.99 Excess(+) Full Conversion INR

0.00;[Re4]0.00 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) (15.2.2) Cum 0.99;[Re11]0.99 Excess(+) Full Conversion INR

0.00;[Re5]0.00 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (15.2.1) Cum 0.00;[Re30]0.00 Excess(+) Full Conversion INR

0.00;[Re6]0.00 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) (4.1.10) Cum 0.00;[Re4]0.00 Excess(+) Full Conversion INR

0.00;[Re7]0.00 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm (15.23.1) Sqm 0.00;[Re13]0.00 Excess(+) Full Conversion INR

0.00;[Re8]0.00 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. (15.25) Sqm 0.99;[Re22]0.99 Excess(+) Full Conversion INR

0.00;[Re9]0.00 Providing and fixing 16 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm (NS) Sqm 0.99;[Re12]0.99 Excess(+) Full Conversion INR

0.00;[Re10]0.00 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. (8.5) Each 0.00;[Re4]0.00 Excess(+) Full Conversion INR

0.00;[Re11]0.00 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (8.31) Sqm 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re12]0.00 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (11.37) Sqm 0.99;[Re31]0.99 Excess(+) Full Conversion INR

0.00;[Re13]0.00 Brick work 7 cm thick with common burnt clay F.P.S. (non modular) brick of class designation 7.5 in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure above plinth level and upto floor five level. (6.8) Sqm 0.99;[Re14]0.99 Excess(+) Full Conversion INR

0.00;[Re14]0.00 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) (6.13.2) Sqm 0.99;[Re27]0.99 Excess(+) Full Conversion INR

0.00;[Re15]0.00 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1cement: 4 coarse sand) (14.1.2) Sqm 0.00;[Re13]0.00 Excess(+) Full Conversion INR

0.00;[Re16]0.00 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) (13.5.2) Sqm 0.00;[Re29]0.00 Excess(+) Full Conversion INR

0.00;[Re17]0.00 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below (15.12.1) Each 0.99;[Re1]0.99 Excess(+) Full Conversion INR

0.00;[Re18]0.00 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. (14.82) Each 0.99;[Re13]0.99 Excess(+) Full Conversion INR

0.00;[Re19]0.00 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. (15.52) Each 0.99;[Re21]0.99 Excess(+) Full Conversion INR

0.00;[Re20]0.00 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 100 mm diameter (19.5.1) metre 0.00;[Re29]0.00 Excess(+) Full Conversion INR

0.00;[Re21]0.00 Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Exposed on wall (14.84) metre 0.00;[Re2]0.00 Excess(+) Full Conversion INR

0.00;[Re22]0.00 Providing and fixing plain bend of required degree. 100 mm dia: Sand cast iron S&S as per IS : 3989 (17.39.1.2) Each 0.99;[Re23]0.99 Excess(+) Full Conversion INR

0.00;[Re23]0.00 Providing and fixing soil, waste and vent pipes : 100 mm dia: Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 (17.35.1.2) metre 0.00;[Re25]0.00 Excess(+) Full Conversion INR

0.00;[Re24]0.00 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.: 100x100x100 mm: Sand cast iron S&S as per IS - 3989 (17.43.1.2) Each 0.00;[Re13]0.00 Excess(+) Full Conversion INR

0.00;[Re25]0.00 Providing and fixing 100 mm sand cast Iron grating for gully trap. (17.29) Each 0.00;[Re21]0.00 Excess(+) Full Conversion INR

0.00;[Re26]0.00 Providing and fixing terminal guard : 100 mm: Sand cast iron S&S as per IS - 3989 (17.56.1.2) Each 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re27]0.00 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989 (17.60.1.1) Each 0.00;[Re18]0.00 Excess(+) Full Conversion INR

0.00;[Re28]0.00 Providing and fixing collar : 100 mm: Sand cast iron S&S as per IS - 3989 (17.57.1.2) Each 0.99;[Re27]0.99 Excess(+) Full Conversion INR

0.00;[Re29]0.00 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm (17.58.1) Each 0.00;[Re13]0.00 Excess(+) Full Conversion INR

0.00;[Re30]0.00 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (17.1.1) Each 0.99;[Re11]0.99 Excess(+) Full Conversion INR

0.00;[Re31]0.00 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (17.2.1) Each 0.00;[Re1]0.00 Excess(+) Full Conversion INR

0.00;[Re1]0.00 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work 15 mm dia nominal bore (18.10.1) metre 0.99;[Re31]0.99 Excess(+) Full Conversion INR

0.00;[Re2]0.00 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.Internal work 25 mm dia nominal bore (18.10.3) metre 0.00;[Re4]0.00 Excess(+) Full Conversion INR

0.00;[Re3]0.00 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). (10.13.1) Kg 0.99;[Re20]0.99 Excess(+) Full Conversion INR

0.00;[Re4]0.00 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 250 to 300 mm diameter (9.21.2) Sqm 0.99;[Re11]0.99 Excess(+) Full Conversion INR

0.00;[Re5]0.00 A (9.125) Sqm 0.99;[Re16]0.99 Excess(+) Full Conversion INR

0.00;[Re6]0.00 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre (13.85.1) Sqm 0.99;[Re10]0.99 Excess(+) Full Conversion INR

0.00;[Re7]0.00 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (13.62.1) Sqm 0.00;[Re13]0.00 Excess(+) Full Conversion INR

0.00;[Re8]0.00 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm (9.96.2) Each 0.00;[Re16]0.00 Excess(+) Full Conversion INR

0.00;[Re9]0.00 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (9.97.3) Each 0.00;[Re8]0.00 Excess(+) Full Conversion INR

0.00;[Re10]0.00 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100 mm (9.100.2) Each 0.99;[Re27]0.99 Excess(+) Full Conversion INR

0.00;[Re11]0.00 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (22.5) Sqm 0.99;[Re8]0.99 Excess(+) Full Conversion INR

0.00;[Re12]0.00 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern (17.5.2) Each 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re13]0.00 Providing and fixing bright finished stainless steel 304 grade 6 PIN cloth hanger weight not less than 300 gm for Bathroom wall/Door with necessary screw etc. complete (NS) Each 0.00;[Re22]0.00 Excess(+) Full Conversion INR

0.00;[Re14]0.00 Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter (19.21.1) Each 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re15]0.00 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore (18.17.1) Each 0.99;[Re13]0.99 Excess(+) Full Conversion INR

0.00;[Re16]0.00 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm (17.32.2) Each 0.99;[Re22]0.99 Excess(+) Full Conversion INR

0.00;[Re17]0.00 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (18.49.1) Each 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re18]0.00 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (18.52.1) Each 0.00;[Re31]0.00 Excess(+) Full Conversion INR

0.00;[Re19]0.00 Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length: 15 mm nominal bore (18.21.2.1) Each 0.00;[Re6]0.00 Excess(+) Full Conversion INR

0.00;[Re20]0.00 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) (21.1.1.2) Kg 0.99;[Re13]0.99 Excess(+) Full Conversion INR

0.00;[Re21]0.00 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) (21.1.2.2) Kg 0.00;[Re25]0.00 Excess(+) Full Conversion INR

0.00;[Re22]0.00 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side (21.2.1) Sqm 0.99;[Re12]0.99 Excess(+) Full Conversion INR

0.00;[Re23]0.00 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) (21.3.2) Sqm 0.00;[Re13]0.00 Excess(+) Full Conversion INR

0.00;[Re24]0.00 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. (10.3) Sqm 0.00;[Re26]0.00 Excess(+) Full Conversion INR

0.00;[Re25]0.00 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (10.28) Kg 0.99;[Re10]0.99 Excess(+) Full Conversion INR

0.00;[Re26]0.00 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (13.88) Sqm 0.00;[Re18]0.00 Excess(+) Full Conversion INR

0.00;[Re27]0.00 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre (13.41.1) Sqm 0.00;[Re3]0.00 Excess(+) Full Conversion INR

0.00;[Re28]0.00 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (13.80) Sqm 0.00;[Re4]0.00 Excess(+) Full Conversion INR

0.00;[Re1]0.00 Providing and fixing oval shape under counter wash basin with C.P brass single lever basin mixer without ppopup waste system with 450mm long braided hoses,32 mm CP brass waste of standard pattern ,including painting of fittings,cutting and making good the walls wherever required: White Vitreous China Flat back wash basin size 550x445(Parryware cat no C0407 or equivalent) with a C.P brass single lever Basin Mixer without popup waste system with 450mm long braided hoses of make ESSCO (CAT No. APR-101011B) o equivalent mm with single 15 mm PTMT pillar cock. (NS) Each 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re2]0.00 Post-construction Anti Termite Treatment in the building as per ISI specification 6313 (1981) SPECIFICATION Providing & Injecting chemical emulsion for Post ATT of soil of existing floors using chemical emulsion for post ATT of soil of existing floors using chemical emulsion @ 1litre per holes,300mm. Apart including drilling holes and plugging 12mm Dia. holes.Providing & injecting chemical emulsionfor post ATT od vids and masonary using chemical emulsion @1 lit. per holes at 300mm.Apart including holes at 45 degree and replugging the same.Providing & Injecting chemical emulsion and wood work by chemical chlordane(Oil and Kerosene based) by drilling holes at downward angle and sealing the same. Chemical to be used:CHLORPYRIPHOS 20 EC(1Ltr:19 Ltr) or Emida Chloropid 30.5% EC( 5ml:1 ltr) (NS) Sqm 0.99;[Re16]0.99 Excess(+) Full Conversion INR

0.00;[Re3]0.00 Deduct credit for taking of SCI pipe and fittings.Centrifugally cast (Spun) iron pipes and fittings. CI flushing cistern GI pipes and fittings. Steel doors.Windows, ventilators, grill round or steel bars etc, and the like received from this dismantling. The material so received from this dismantling. The material so received shall be the property of contractor after dismantaling duly weight measered before removing after dismantaling duly weight measered before removing from the site in the presence of Engineer in charge or his authorized representative all complete (NS) Kg 0.00;[Re20]0.00 Excess(+) Full Conversion INR

0.00;[Re4]0.00 Deduct Credit for taking of C P Bib cock & stopcocks. (NS) Each 0.00;[Re27]0.00 Excess(+) Full Conversion INR

0.00;[Re5]0.00 Deduct Credit for taking away old dismentalled damaged wooden doors/ window/cupboard shutters/boxes etc. The material received from dismantling shall be the property of contractor. After dismantling material weight to be measured before removing from the site in the presence of engineer in charge or his authorised representative shall be taken for credit all complete (NS) Kg 0.00;[Re14]0.00 Excess(+) Full Conversion INR

0.00;[Re6]0.00 Deduct credit for taking away PVC Cistern, loft tank,over head tank and PVC doors etc. and the like received from dismantling. The material so received shall be the property of contractor after dismantling duly weight/measured before removing from the site in the presence of Engineer in Charge or his authorised representative all complete (NS) Kg 0.99;[Re10]0.99 Excess(+) Full Conversion INR

Total in Figures Excess(+) Full Conversion INR

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information