SPL REPAIR TO TOILET AND BATHROOM OF BLDG NO P-461 (OR OTM ACCN) OF 53 MED REGT AND OTHER SANCTIONED WORKS UNDER GE (WEST) JRC

Amount

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed by Engineer-in-Charge.

Taking down eaves gutter and rain water pipes (any size and pattern), including all fittings, heads, shoes, bends, swan necks, etc. removal from site (measured overall as fixed along the centre line or fittings and accessories) complete all as specified and directed.

Dismantling PVC water tank of capacity 2000 Ltr and S&F new rotational moulded polyethylene water storage tank of capacity2000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer-in-Charge.

Disconnecting existing tanks, setting aside (or lowering if required) and cleaning and removing all scales and dust from PVC water tank manually and cleaning, scraping inner surfaces of tank by means of brush and then washing with clean water and cleaning of mouths of circulating pipes of capacity of tank exceeding 1000 litre but not exceeding 2000 litre including writing date of cleaned outer body of the tank with 100mm high by synthetic enamel paint (white/black colour) and reconnecting and refixing in position, complete all as specified and directed by Engineer-in-Charge.

Taking up or down Steel Tubing bore of pipe in 15mm and connections, including cleaning for refixing or removal to store etc, complete all as specified and directed by Engineer-in-Charge.

All as per item No 8.00 above but of 20mm bore, complete all as specified and directed by Engineer-in-Charge.

Demolition of PCC in Ground floors/PCC Path/Plinth Protection and paving not exceeding 15cm thickness (below or above ground level) etc, complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer-in-Charge.

Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided for, complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

All as per item No 14.00 above but except bricks etc, complete all as specified and directed by Engineer-in-Charge.

M&L for Brick work with sub class 'B' bricks using old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs, complete all as specified and directed by Engineer-in-Charge.

Demloition of Mud in roof , any thickness , including plastering and leeping (whether full thickness removed or a part thereof, complete all as specified and directed by Engineer-in-Charge.

M&L for roughening surfaces of old/concrete floor by backing sweeping clean and washing down with water etc, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC padding 1:2:4, type B-1(using 20 mm garded stone aggregate) as in roof padding in specified slope, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick screed bed or bedding layer of mortar in CM 1:4, using WPC, complete all as specified and directed by Engineer-in-Charge.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, over a coat of hot blown bitumen 85/25 @ 1.20 kg/Sqm, complete all as specified and directed by Engineer-in-Charge.

M&L for 40 mm thick brick tiles laid over and including cement mortar 1:6 and joints grouted flush in CM 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified and directed by Engineer-in-Charge.

All as per item No 23.00 above but except tiles, complete all as specified and directed by Engineer-in-Charge.

M&L for flush pointing to brick tiles, laid flat in cement mortar 1:3, complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type B-1, 1:2:4(20 mm graded) in roof kerbs or mud stops rounded or chemfered edges, complete all as specified and directed by Engineer-in-Charge.

M&L for cutting chases, pinning in brick walls making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, complete all as specified and directed by Engineer-in-Charge.

Supply only integral waterproofing compound, complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type E-2 1:5:10 (using 40mm graded brick aggregate ) as in sunken flooring, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm thick plasteing in CM (1:3) with WPC on walls as on sunken floor finished even and smooth using extra cement complete all as specified and direced by Engineer-in-Charge.(Note-After doing the plaster testing be carried out by ponding (for 72 hrs) the sunken portion before further treatment to the sunken slab.any leakage/seepage obserbed shall be rectified before carrying out water proofing treatment).

M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded stone aggregate) as in flooring, finished even and rough to receive the topping layer, complete all as specified and directed by Engineer-in-Charge.

M&L for joint free non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

All as per item No 32.00 above but in vertical surfaces such as skirtings, dados and risers to steps etc, laid over and including 10mm thick cement plaster in CM 1:4, complete all as specified and directed by Engineer-in-Charge.

M&L for coloured glazed ceramic tiles in vertical surface 450x300x7 mm thick laid over and including 10mm thick cement plaster in CM 1:4, set and jointed in neat cement slurry and pointed in white or colour cement to match , complete all as specified and directed by Engineer-in-Charge.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to, complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engineer-in-Charge.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal/sloping), fair finished surfaces concrete flat, complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed by Engineer-in-Charge.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by Engineer-in-Charge.

S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in trenches, walls, ceiling or laid in floors etc, complete all as specified and directed by Engineer-in-Charge.

All as per item No. 40.00 above but of size of 20mm bore, complete all as specified and directed by Engineer-in-Charge.

All as per item No. 40.00 above but except GI pipe, complete all as specified and directed by Engineer-in-Charge.

All as per item No. 41.00 above but except GI pipe 20mm bore, complete all as specified and directed by Engineer-in-Charge.

S&F vitreous china under counter top Wash Basin, snow white, oval type of size 560mm x 470mm x 190mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc, complete all as specified and directed by Engineer-in-Charge.

S&Fin repair vitreous china wash down water closet, "Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding, complete all as specified and directed by Engineer-in-Charge.

S&F in repair Low Level Flushing cistern PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of M.S. angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc, complete all as specified and directed by Engineer-in-Charge.

S&F in repair fancy type, brass chromium Plated stop valves/Angle valves, cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F in repair fancy type, brass chromium Plated stop valves/Angle valves with long shank and cup (concealed type), cast copper alloy, bore dia of pipe in 15mm, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe and fixed, complete all as specified and directed by Engineer-in-Charge.

M&L for chromium plated long body bib tap cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe and fixed to 15mm bore pipe fixed as in repairs including taking down old tap of any description, complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repair; 15mm bore swan neck pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed by the Engineer-in-Charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm etc, complete all as specified and directed by Engineer-in-Charge.

S&F in repair gun-metal, globe or gate valves for 20mm bore dia of pipe, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe or union, , complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs shower rose of brass chromium plated with shower arm 195mm long with bend of 45 degree 15mm dia, complete all as specified and directed by Engineer-in-Charge.

S&F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed by Engineer-in-Charge.

S&F CP soap dish, any type, fixed to plugs with chromium plated brass screws, complete all as specified and directed by Engineer-in-Charge.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints fixed to walls, complete all as specified and directed by Engineer-in-Charge.

S&F 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laid in trenches or in floors Complete all as specified and directed by Engineer-in-Charge.

S&F 110 mm bore PVC(SWR) bend any radius, complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) branch piece, single (single Y) equal or unequal , complete all as specified and directed by Engineer-in-Charge.

S&F 110 mm bore PVC (SWR) 'P’ trap, complete all as specified and directed by Engineer-in-Charge.

S&F PVC (SWR) floor trap of 110mm outlet dia, plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joints,fixed to wall, laid in trenches or in floors, complete all as specified and directed by Engineer-in-Charge.

S&F 75mm bore PVC (SWR) bends any radius provided with access door, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stack clamps for bore dia of pipe 100mm, made out of 50 mm x 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls, finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls, finished fair and even, complete all as specified and directed by Engineer-in-Charge.

M&L for 5mm thick Rendering in CM 1:3 on brick work or concrete surfaces on ceiling finished even and smooth without using extra cement etc, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of primer, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new plastered surfaces and distempering walls with two coats of distemper oil emulsion, white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces and applying three coats of White Wash on ceiling etc, complete all as specified and directed by Engineer-in-Charge.

All as per item No. 72.00 above but over old surfaces of ceiling, including removal of existing treatment, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two coats of oil emulsion distemper white or tinted over and including 1mm thick wall care putty including primer, complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment and applying two coats of cement base paint, complete all as specified and directed by Engineer-in-Charge.

S&F solid PVC frame as in door, of size 50mm x47mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. Square tube and edges will be painted to match with printed sheets, suppyling & fixing in opening as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed PVC sheet ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; & 5mm thick x 15mm wide PVC sheet beading use inside stiles and rails and decorative PVC beading of 10mm x 10mm (90 degree)used. Panelling of wood grain printed PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed by Engineer-in-Charge.

S&F stainless steel steel butt hinges cold rolled of size 100mm medium weight, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium anodised,barrel tower bolts 200mm long of extruded section and fixed, complete all as specified and directed by Engineer-in-Charge.

S&F Aluminium handles, cast type anodised of size 150mm etc, complete all as specified and directed by Engineer-in-Charge.

Supply & fix factory made steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per item No 81.00 above but window with glazed shutter.

S&F mild steel work as in as in grill gratings etc with ends of bars shouldered and or riveted or fixed in spike, framed guard bars barred iron doors ladders frame balusters walk ways confirming to Fe- 290, Gde E-165 complete all as specified and as directed.

S&F 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-Charge.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples, wodden beads to steel windows/wodden doors, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed by Engineer-in-Charge.

M&L for dugging out average 15mm thick on disturbed chajja beam, slab portion and applying chicken wire mesh over disturbed portion fixed with drilling bolting etc.after anti corrosion treatment of steel bar and finaly finished with 15mm thick (1:3) (in two layers) cement plaster, complete all as specified and directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china Urinal, Half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china urinal partition white of size 310x700 mm, complete all as specified and directed by Engineer-in-Charge.

S&F waste coupling including waste pipe suitable for urinals, bore dia of discharge pipe 32mm of PTMT (half or full threaded), (Minimum weight 45gms), complete all as specified and directed by Engineer-in-Charge.

S&F urinal spreader of brass chromium plated, any colour for fixing with 15 mm dia pipe, complete all as specified and directed by Engineer-in-Charge.

Surface dressing not exceeding 15 cm deep and getting out as in soft/loose soil, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete etc, complete all as specified and directed by Engineer-in-Charge.

M&L for 25mm sand filling under floors or in foundations including watering and consolidation, complete all as specified and directed by Engineer-in-Charge.

M&L for factory made machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and no pigment, complete all as specified and directed by Engineer-in-Charge.

M&L for factory made machine pressed precast concrete interlocking paver block, 80mm thick, any shape and size, confirming to IS-15658-2006, M-40 Grade, with grey cement and pigment, complete all as specified and directed by Engineer-in-Charge.

M&L for precast reinforced cement concrete type B-1, 1:2:4 as in cover slabs over drain/manholes etc. including necessary formwork, complete all as specified and directed by Engineer-in-Charge.

M&L for providing cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof kerbs or mud stops, benching etc. rounded or chamfered on edges, complete all as specified and directed by Engineer-in-Charge.

M&L for providing precast cement concrete type B-I, 1:2:4, as in kerb stone to the sides of interlock tiles including chamfers, weatherings, throating etc. and setting in mortar 1:6 complete with joints to match, complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium / copper point wiring (light / fan / socket or power)/power wiring complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors

Taking down unserviceable Submain/ Cable/ Service wire of any size as directed by Engineer-in-Charge.

Taking down main switch / DB as directed by Engineer-in-Charge.

M&L for point wiring with PVC insulated, unsheathed cable single core multistranded copper conductor FRLS cable 1.5 sqmm size, 1100V grade, drawn into existing PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLS conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.6 mm thick with 3 mm thick laminated bakelite sheet all as specified. a) One light / fan / call bell point controlled by one, one way switch.

All as per Ser item No 105.00 above but for 5 amps socket on independent board

All as per Ser item No 105.00 above but for 5 amps socket on same board

All as per Ser item No 105.00 above but with 2.5 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent board

S&F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts, AC

S&F socket out let multipurpose 5 pin 5 Amps,230 Volts complete all as specified and directed.

S&F socket out let multipurpose 2 in 1, 3 pin, 6/16 Amps, flush type, 230 / 250 Volts complete all as specified and directed.

S&F switch 16 Amps, flush button type, SP, one way, 230 Volts, AC complete all as specified and directed.

M&L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified.

M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.

S&F LED bulb 12 W, minimum 3 star rating complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor, FRLS type cable drawn through and including PVC concealed conduit of 20mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed, multi stranded copper conductor , FRLS type cable as earth wire complete all as specified and directed.

Supply & fixing MCB DB SPN with 200 amps rated Bus Bar suitable for MCBs 8 way all as specified and directed by Engr-in-Charge.

S&F MCB SPN 40 to 63 Amps 240 volts complete all as specified and directed.

S&F MCB SP 6-32 Amps 240 volts complete all as specified and directed.

S&F in replacement LED tube set (fitting) 20 W use and through type with internal surge protection device of 4 KV with voltage band 140-280V with LED rod with fixture box type and making electrical connection to ceiling rose all as directed.

S&F LED mirror light 10 Watt 2 feet complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic/PVC body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DB by means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part I

Supply laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core

S&F IP65 Rated LED Bollard with robust design and efficient light distribution catalog no -LBLTW-10-WW

S&F Gl pipe bracket Made out of Gl pipe 40 mm dia light Grade 2.0 mtr all as directed at site

S & F sheet metal enclosure for DB’s (Double door type) when MCB’s to be used, single pole and neutral, 8 ways with 200 ampere rated bus bar, 240 volts fixed sunk / flush to the wall with IP-43 and IK-09 protection complete all as specified and directed.

S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type complete all as specified and directed.

Supply & refixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘C’ curve type complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soil all as specified and directed.

Making/boring hole under road/pavement/hard standing with help of bookies suitable for passing pipe (any type) upto 80 mm bore not lessthan one mtr below ground level including required earth work.

Supply and laying galvanized steel tubing medium grade 25 mm bore with all fittings such as tees, bends, elbows, reducer, union nipples etc including all fixing accessories such as couplers hooks,nuts saddles pipe hooks laid in trenches/under floor or fixed walls complete all as specified in trenches including all fittings of following bore

All as per item No 134 here in- before but 20 mm bore

Supply and fixing (in repairs) gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed of size 20 mm bore

Drilling and tapping cast iron water mains (in position) for branch connection of 20 mm dia including ferrule and excavation, removal, returning filling, T&P etc complete all as directed.

Supply & fix single pointed air termination aluminium rod 12mm dia, 300 mm long complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 3.15 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to but using copper plate 60×60cm ×3.15mm thick electrode and 20×3mm copper strip as earthing lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

Supply & fix aluminium strip 25mm x 3mm complete with saddles and fixing screws for fitting the strip.

Sanjiv Kumar (BID ID -3425774)