Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.2 LAccepted-AOC H NO 18 SHEET NO 5 A KATIA COLONY NAMDEV MARG BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹49.5 L+₹57,705 (1.18%)Rejected-Finance 01 ENTERPRISES | L2 | Rejected-Finance Quoted other than lowest rate. | |
| 3 | L3₹49.8 L+₹94,245.45 (1.93%)Rejected-Finance 220 GANPATI ENCLAVE DABWALI ROAD BATHINDA 151001 | BATHINDA | PUNJAB | 151001 | L3 | Rejected-Finance Quoted other than lowest rate. | |
| 4 | L4₹49.9 L+₹98,455 (2.01%)Rejected-Finance | L4 | Rejected-Finance Quoted other than lowest rate. | |
| 5 | L5₹49.9 L+₹1.0 L (2.12%)Rejected-Finance NA | NA | NA | 121004 | L5 | Rejected-Finance Quoted other than lowest rate. |
Tender Value
₹49.7 L
EMD Value
₹99,400
Closing Date
1 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SH ASHOK KUMAR, EE, IDSE
GE (N) Bathinda
ADDN/ALTERATION TO SEWAGE LINE AT CERTAIN UNITS AND SPL REPAIR TO BLDG NO P-716 UNDER AGE B/R- V AND AGE E/M -V OF GE (N) BATHINDA AT BATHINDA MIL STN
2024_MES_645527_2
8938/NIT-81/23-24
Open Tender
Civil Works
Item Rate
180 days
BATHINDA
Class D category a(ii)
8 documents required · 8 mandatory
₹500
GE NORTH BATHINDA
₹99,400
Yes
3 Sept 2024
15 Jun 2024
3 Jul 2024
15 Jun 2024
1 Jul 2024
24 Jun 2024
15 Jun 2024 - 18 Jun 2024
Amount
B/R Works
Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre in depth for foundations of manholes, sewerage pipe lines etc or for manholes, wells, cesspits etc not exc 10 sqm on plan including getting out complete all as specified and as directed by Engineer-in-Charge .
Description all as per serial item No 1.00 here-in-before but exceeding 1.5 metre and not exceeding 3.00 metre in depth. complete all as specified and as directed by Engineer-in-Charge .
Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe up to and incl 150 mm bore pipes all as specified and directed by Engineer-in-Charge.
Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe up to and incl 300 mm bore pipes all as specified and directed by Engineer-in-Charge.
Material & labour for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipe incl packing under & haunching against the sides of pipe 150 mm dia ( internal) after they are laid and tested in trenches complete all as specified..
Material & labour for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipe incl packing under & haunching against the sides of pipe 300 mm dia ( internal) after they are laid and tested in trenches complete all as specified..
Material & labou 150mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed by as Engr-in-charge
Material & labou 300mm Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and as directed by as Engr-in-charge
Demolition of brick work built in cement mortar including all quoins, pillars etc., but excluding pre-cast cement concrete articles complete all as specified and as directed by Engineer-in-Charge .
Material & labour for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) for foundations, fillings & mass concrete complete all as specified and as directed by Engineer-in-charge.
Material and labour for Brick work with sub class ‘B’ bricks old size straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge .
Material and labour for Brick work with sub class ‘B’ bricks old size straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge .
Material & labour for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) for manhole benching and coping, around interlocking paver block complete all as specified and as directed by Engineer-in-charge.
Material & labour for 15 mm thick cement plaster in cement mortar 1: 4 on fair / unfair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in-charge.
Supply & Fixing in repair SFRC (Steel fibre reinforced concrete) cover, factory made and frame (heavy duty HD-20 grade designation (size of cover 0.70 x 0.70 or as directed by EIC) conforming to IS : 12592, fixed in cement cocrete 1:2:4. complete all as specified and as directed by Engr-in-Charge.
Returning, filling in including spreading, leveling, watering & well ramming in layers not exceeding 25 cm thick each all as specified and as directed by Engineer-in-Charge.
Removal of excavated material to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-Charge .
Supply only integral water proofing powder complete all as specified and directed by Engineer-in-Charge.
Dismantling brick/PCC terracing tiles single layer in roof, laid and pointed in cement mortar and removing/disposal off from the site complete all as specified and as directed by Engineer-in-charge.
Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing/cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge.
Material and labour for roughening surfaces of existing concrete surfaces of roof/ floor by picking, sweeping, clean and washing down with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified and directed by Engineer-in-charge. Note: The rate of neat cement slurry @ 3.0 Kg of cement per Sqm is included in this item and nothing shall be paid extra on this account.
Material and labour for cement concrete (1:2:4) type B-0, (using 12.50 mm graded stone aggregates) as in roof padding including mixing with Water Proof Compound as per manufacturer's instructions and finished even and fair complete all as specified and as directed by Engineeer-in-charge. Note :- Water Proof Compound shall be measured and paid for separately under respective item of Schedule'A' BoQ..
Material and labour for 15 mm thick screed bed or bedding layer in cement mortar (1:4) on roof surfaces, parapet or vertical beam surface (horizontal or vertical) finishing the surfaces even and fair complete all as specified and as directed by Engineer-in- charge.
Material and labour for tack coat layer of blown grade bitumen of any penetration applied hot @ 1.70 Kg per Sqm and priming the surface @ 1.70 Kg per Sqm and with and including material and labour for laying 3mm thick APP based polymer membrane of weighing not less than 3.5 Kg per Sqm reinforced with polyster non woven fabric (weight not less than 150 Gm per Sqm) laid on primed surface at by torch application with side overlap 75mm and end overlap 100mm and tucked into the chasesas a treatment for moderate condition complete all as specified and as directed by the Engineer-in-Charge. Note: The rate of 3mm thick APP based polymer membrane is included in this item and nothing shall be paid extra on this account.
Material and labour for cement concrete (1:2:4) type B-0, (using 12.50 mm graded stone aggregates) as in bands, bedding, benching of manholes, coping, surface channel, roof kerbs or mud stops, rounded or chamfered on edges etc including use and waste of necessary form work complete all as specified and as directed by Engineer-in-charge.
Taking down cement plaster of any description on brick or concrete surfaces, etc. including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in- charge.
Material and labour for 5mm thick rendering in cement mortar 1:3 on ceiling finished the surface even and smooth without using extra cement and applying one coat of white wash including preparation of new plastered surfaces complete all as specified and directed by Engr-in-Charge.
M&L 15 mm thick cement plaster on fair faces of bricks or concrete walls in CM 1:6 finished even and smooth with out using extra cement including applying two coats of acrylic distemper using painting roller including 2 to 3mm thck wall care putty complete all as specified and directed.
M & L 15 mm thick rendering in cement mortar 1:4 with water proofing compound as per manufacturer's instructions ( externally )and finishing the surface even and smooth without using extra cement and priming plastered and other surfaces with alkali-resistant priming paint and applying two coat of exterior emulsion paint (Apex) including preparation of new plastered surfaces on wall. complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified and as directed by Engineer-in- charge.
Material and labour for Non Skid ceramic coloured tiles 7 to 8 mm thick, square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor, set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Material and labour for Glazed ceramic coloured tiles of size 300mmx 200mm / 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry @ 3.00 Kg/ Per Sqm and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour 25 mm thick Cement concrete 1:2:4 type B- 2, (using 40mm graded stone aggregate) leveling course as in floor complete all as specified and directed
Material and labour for 20-25 mm thick Kota stone slab as approved by GE flooring, mirror polished laid over and including 15 mm thick screed bed in cement mortar 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge.
Material and Labour for machine cut kota stone slab as approved by GE as in vertical surfaces, 20-25 mm thick laid over and including 10 mm thick rendering in cement mortar 1:4 laid and jointed with grey cement slurry @ 3 Kg/ Sqm mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in- charge.
Demolition of cement concrete (unreinforced) in ground floor and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge
Material and labour for 75mm thick cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and as directed by Engineer-in-charge.
Material and labour for machine pressed precast interlocking paver block 60 mm thick with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over and including 25 mm thick layer of sand cushioning complete all as specified and as directed by Engineer-in- charge. Note: The rate of 25mm thick layer of sand cushioning is included in this item and nothing shall be paid extra on this account. .
Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden /PVC door s/steel ventilator) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4 Sqm each complete all as specified and as directed by Engineer-in- charge. .
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing, fixed in opening using MS screw 75mm long with PVC fastener including making good disturbed wall surfaces (brick, plastering, tiles and painting work as per existing) complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing factory made 105mm x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including one shop coat of zinc chromate primer paint including supply and fixing necessary lugs and lock strike plate, etc. , including fixing butt hinges suitable Nos. as directed for each leaf, complete all as specified and as directed by Engineer-in- charge. Note : - Butt hinges shall be measured and paid separately under appropriate item of BOQ as supply only.
Material and labour for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in back filling of pressed steel chowkhats single or double rebated or for fixing hold fasts etc complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (Bonsum/ Hollock) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- Wire gauze/ glass to be measured and paid separately.
Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard wood with lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhat complete all as specified and as directed by Engineer-in- charge.
Supply and fixing steel window box type double shutter (glazed with wire gauge)with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bar dovetailed or welded and including window guard bar, tower bolt,flat iron for fixing wire netting including one shop coat of zink chromate primer paint and making good to distrubed portion to match with existing surfaces complete all as specified and directed. Note : Glass and wire gauge shall be measured and paid separately under relevant items of BoQ.
Supply and fixing factory made steel ventilators with top hung shutter incl hinges steel pegs & stays complete with one shop coat of red oxide primer including taking down old rusted ventilator and making good distrubed surface complete all as specified
Supply and fixing Powder coated aluminium (minimum thickness of powder coating 50 micorn) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc., drawing and size as approved by GE complete all as specified and directed by Engineer-in-charge .
Supply and fixing factory made anodised aluminium door shutters, aluminium sections weighing not less than 0.55 kg/metre including necessary joining cleats, glazing clips, rubber neoprene packing, handle 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc drawing and size as approved by GE complete all as specified and as directed by Engineer-in- charge.
Supply and fixing sheet glass, 4.8 mm thick ordinary quality in square not exceeding 0.50 Sqm in each pane fixed with aluminium/ rubber beads including provn of glazing pins wherever necessary complete all as specified and directed by Engineer-in- charge. .
Supply and fixing Stainless steel wire cloth, 0.56 mm nominal dia of wire & average width of aperture 1.18mm and fixed with tinned tacked or galvanized steel wire staples complete all as specified and as directed by Engineer-in- charge.
Supply and fixing 300mm long, aluminium anodised sliding door bolt with hasp, staple (bolt type), and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed by Engineer-in- charge.
Supply & fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge.
Supply only 100 mm long butt hinges, heavy weight, cold rolled mild steel, complete all as specified and as directed by Engineer-in- charge.
Supply & fixing 125mm long, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in- charge.
Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in- charge.
Supply and fixing 150 mm long aluminium anodized barrel tower bolts, extruded section complete all as specified and as directed by Engineer-in- charge.
Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chromate primer primer complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of old steel and iron surface of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Material and labour for preparation of new wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge.
Material and labour for preparation of old wooden or wood based surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed by Engineer-in- charge.
Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed ) and making good disturbed surfaces of walls including cutting and threading of pipe including taking down old existing galvanised steel water tubing omplete all as specified and as directed by Engineer-in- charge.
Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore with all new fittings like elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as directed) and making good disturbed surfaces of walls including cutting and threading of pipe including taking down old existing galvanised steel water tubing complete all as specified and as directed by Engineer-in- charge.
Supply & fixing rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection, including supply and fixing 20mm ball valve and gate valve including dismantling /taking down of existing unserviceable PVC water storage tanks of any description complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in replacement stainless steel chromium plated pipe 25mm dia, wall thickness of pipe not less than 20 guage, as curtain rod fixing with and including fancy type brackets and decorated end knobs (finials), stop roller etc, fixed on wall for doors and windows curtains, cuttings as required length and fixing at site including fixing arrangements, rawl plug, screws etc. including taking out old any type rod or pelmet boxes with curtain rod complete all as specified & directed by Engineer-in- charge.
Supply and fixing in repairs vitreous china wash down water closet pan (EWC) (pedestal pattern) white and trap including connection to drain (or outgoing pipe) and to flushing pipe of polyethylene of low or high density, antisyphonage pipe including white coloured closed pattern plastic seat cover and fixing bolt and flush pipe of polyethlene of low or high density 32mm dia (excluding flushing cistern ) anti syphonage pipe etc and connection to drain for outgoing pipe and to flushing pipe anti-syphonage pipe etc complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing in repairs vitreous china wash basin, white, with pedestal, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper including brackets (flat back or angle backe type) any size, including cutting for and pinning in ends of brackets or errecting stand, 32 mm dia waste pipe coupling & PVC waste pipe of 32mm dia etc complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle including brackets including 32 mm dia flush pipe of polyethylene of low or high density of PVC complete all as specified and as directed by Engineer-in- charge.
Supply and fixing in repairs vitreous china white half stall urinal, of size 420mm x 395mm x 635mm (minimum), exclusive flushing cistern, flushing pipe, but including white waste pipe, grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws or brackets, pointing around urinal back in cement etc complete all as specified and as directed by Engineer-in- charge.
Supply & fixing in repair 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified & directed by Engineer-in-charge.
Supply and fixing Brass Chromium plated long body Bib Tap , screwed down, screwed for iron pipe or for brass ferrule for 15mm bore of pipe complete all as specified and as directed by Engineer-in-charge.
SSupply and fixing in replacement stop valve/angle valve cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed both end for iron pipe or for brass ferrule 15mm bore complete all as specified & directed by Engineer-in-charge.
Supply and fixed in repair pillar tap cast copper alloy with capstan head, chromium plated, fancy type, high pressure with or without letter 'Hot' or 'Cold' with long shank and fly nuts screwed for iron pipe or for brass ferrule 15mm bore complete, all as specified & directed by Engineer-in-charge.
Supply and fixing in repairs brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by Engineer-in- charge.
Supply and fixed in replacement aluminium( extruded section body) door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed
Taking down AC eaves gutters and rain water pipe (any size or pattern ), including all fittings, heads, shoes, bends, swan necks, etc, complete all as specified and as directed by Engineer-in- charge.
Supply and fixing PVC SWR pipe 110mm bore dia, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by Engineer-in- charge
Supply and fixing PVC SWR Bend 110mm bore dia complete all as specified and as directed by Engineer-in- charge.
Supply and fixing PVC SWR Pipe 75mm bore dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in- charge.
Supply and Fixing PVC SWR Pipe Bend 75mm bore dia complete all as specified and as directed by Engineer-in- charge.
Supply and fixing 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-charge
Supply and fixing Red colour Pre- painted galvalume sheet of CRIMP Profile (Curved Section) aluminium zinc coating GI based corrugated steel sheet 0.45mm thick having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws includig taking down existing sheet of any type and pattern complete all as specified and as directed by Engineer-in-charge.
Material and labour for mild steel work in tubular trusses, tubular/rectangular MS pipe such as vertical post, trusses, rafter, purlins etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and as directed by Engineer-in-charge.
E/M Works
Taking down old unserviceable copper/aluminium point wiring concealed/ batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/ iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed by Engineer-in-Charge.
Taking down old and unserviceable, distribution board any type including, MCBs etc after removing all connection and making good the disturbed surface all as directed by Engr-in-charge.
Material and labour in replacement for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 6.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through and including new rigid PVC concealed conduit fixed on wall. Notes : (i) Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. (ii) Wiring shall be done in proper colour coding.
Material and labour for point wiring for one light/fan point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid conduit 1.8mm wall thickness ISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified. Note : (a) wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge.
All as per item No 89.00 here-in-before but for multi 5 pin 5 Amp socket outlet on same board
All as per item No 89.00 here-in-before but for multi 5 pin 5 Amp socket outlet on Independent board
All as per item No 89.00 here-in-before but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable PVC insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsheathed copper conductor multistrand cable 2.5 sqmm as earth wire FRLS PVC insulated in green color all as directed by Engr-in-Charge complete with new CI/pressed steel sunken black with hylum top sheet cover 3mm thick
Supply and fixing socket outlet 5 Pin, 5A, flush type complete all as directed
Supply and fixing switch piano, flush type single pole one way 5Amp, 240 volts all as specified .
Supply and fixing switch piano flush button single pole one way 15 Amp all as specified
Supply and fixing socket outlet 6 pin 15 Amp 240 volt multi purpose flush typeall as specified
Supply and fixing ceiling rose, 3 Phase/PVC/polycarbonate isolated body
Material and labour in replacement distribution board sheet steel phosphatised powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as directed by Engr-in-Charge.
Supply and fixing MCB single pole and neutral 32/40 Amp suitable for 240 volt.
Supply and fixing MCB single pole 5-32 Amp suitable for 240 volt.
Supply and fixing in replacement new generation energy saving ,wall mounted LED tube light batten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED power factor > 0.95, 100 lumen/watt duly fitted on pvc square block 5700K (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz complete all as directed by Engr-in-Charge.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete power factor > 0.95, 100 lumen/watt, CCT min 5700K complete all as directed by Engr-in-Charge.
Material and labour for Earthing complete with galvanised iron earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including earth continuity GI wire 4 mm (upto test point from earth plate i.e. 7.5m min) by means of GI bolts/nuts/washers and including protected by 15mm dia GI light grade protection pipe from earth plate to test point, including making of test point. Earth plate shall be surrounded by packed layer of char coal/coke & salt all around bottom and top with alternative layer. 20mm GI light grade pipe for watering (should be 10cm above GL) and including socket, plug, funnel, wire mesh, RCC cover and (including steel for cover) PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in earthing pit including necessary form work, excavation & earth work, all as specified & shown in electrical plate No. 3 of SSR (Part – I) complete all as directed by Engineer-in-charge. Note:- (i) PCC chamber shall be constructed at least 1.5 metre away from the earth electrode and pipe for watering shall be provided in slanting manner.
Supply and fixing in provision of BLDC (Brushless direct current motor) ceiling fan 5 star rated, complete with blades, down rods, and accessories, 230 Volts, 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, including electrical connection providing twin core round copper conductor cable of suitable size, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Srl Number of ceiling fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Ceiling fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account
Material and labour for Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at ground/First/Second floor including plastering for making good to the original surfaces of any description including painting /distemper matching with the existing colour. Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site.
Supply and fixing of exhaust fan stainless steel body 300 mm sweep (BEE, 5 star rated) with louvres, 230V, single phase AC supply, hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface as per existing surfaces, and connection to fan with suitable flexible twin core round copper wire complete all as specified and directed by Engineer-in-Charge. Note :- (i) Srl Number of exhaust fan and 'GE North BTD' shall also be writing on fan with red colour permanent marker, cost for the same shall deemed to be included in the quoted unit rate, nothing shall be paid extra on this account, Srl number will be issued by Engineer-in-Charge. (ii) Exhaust fan installed/hanging at site as directed by Engineer-in-charge (from market to AGE E/M store/AGE E/M store to sites /Location, all conditions will be the responsibility of contractor and nothing extra will be admissible on this account.
Supply, laying and testing cable XLPE Insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 V grade cross sectional area 25 Sqmm, 3.5 core in and incl taking out old one all as specified and directed.
Supply, laying and fixing GI tubing light graded 40 mm incl all accessories for encasing cables for mechanical protection, laid under plinth/floors/path culverts with complete accessories such as bends/ sockets/ reducers/ saddles incl necessary threading/drilling works all as specified and directed of sizes (MS work will be measured under separate item in schedule)
Singla Enterprises
M/S SAI BUILDERS
R K GOYAL AND CO
NAIB ENTERPRISES
P K BANSAL CONTRACTOR
M/s DHEERAJ JAIN CONSTRUCTION COMPANY
M/s Kamal Builders
M/s Verma Construction Company
M/s Vandana Builders
stage.html
html • 0.07 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .