REPAIR REPLACEMENT TO FLOORS KITCHEN SUNKEN REPAIRS PLUMBING WORKS JOINERY CERTAIN CONNECTED WORK IN GOLF VIEW AND POST OFFICE ROAD OFFRS MD ACCN UNDER GE MAINT INFANTRY SCHOOL MHOW

Amount

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but not exc 4.0 sqm each complete all as specified and as directed.

Taking down shuters of any description not exc 1 sqm each and removing from site complete all as specified and as directed.

Taking down shuters of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and as directed.

S & F for 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.

S&F for Mild steel angle or flat iron, small articles such as hold fast , brackets, straps, cleats, etc for door/window chowkats including two coats of red oxide primer complete all as specified and as directed.

M&L for PCC (1:3:6) type C1 using 20mm graded aggregate as in bed blocks of hold fast, etc complete all as specified and as directed.

Treating back of chowkats of wood, steel and iron work with two coats of tar or coal for black paint. complete all as specified and as directed.

S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S & F for 30 mm thick factory made, 2nd class hard wood glazed and skeleton shutters, open rebeated and prepared to received glass, gauzed, with sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (b) for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.

S&F for factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.

S&F in repairs of steel window with side hung shutter including projecting type hinges with steel handle, peg stay complete with glazing bars dovetailed or welded, etc complete all as specified and as directed.

Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. complete all as specified and as directed.

M & L for preparing surfaces of wood and wood based materials, new or old of any description and grith not otherwise described and treated with cresote as specified.

S & F for galvanised mild steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised wire staples,etc complete all as specified and as directed.

S & F in repairof galvanized mild steel wire clothes 0.56 nominal dia of wire and average width of aperture 1.18mm fixed with beading complete all as specified and directed.

M&L for sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and as directed.

M&L for 3mm thick figured glass pin head type in squre nexc o.5 sqm in each pane ventilator / window shutter complete all as specified and as directed.

Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or stone etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.

S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 50mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F in repairs of 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F 125 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F in repair of 125 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.

S&F 150mm long aluminum alloy handles fabricated anodised complete all as specified and directed. .

S&F in repairs of 150 mm long aluminum alloy handles fabricated anodised complete all as specified and directed. .

S&F for 125 mm long aluminum alloy handles fabricated anodised complete all as specified and directed. .

S&F in repairs of 125 mm long aluminum alloy handles fabricated anodised complete all as specified and directed. .

S&F in repairs of 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt sliding bolts of extruded section complete all as specified and as directed.

Resecuring or easing & adjusting, without taking down, shutters of any description n.exc 1.00 sqm each in same opening complete all as specified and directed.

Resecuring or easing & adjusting, without taking down, shutters of any description exc 1.00 sqm but n.exc 2 sqm each in same opening complete all as specified and directed.

S & F in repair of wooden small fittings such as door and window stoper of 2nd class hard wood and the like including all necessary labours, articles nexc 200cu.cm complete all as specified and as directed.

Dismantling timber framed filled rails, post, rafters purlins, etc under 40Sqcm in section complete all as specified and as directed.

S & F plain fillets , square rectangular or triangular in section ,clean sawn secured with nails or brads of 2nd class hard wood exceeding 6sqcm but not exceeding 13 sqcm complete all as specified and as directed.

S & F plain fillets , square rectangular or triangular in section ,clean sawn secured with nails or brads of 2nd class hard wood exceeding 13sqcm but not exceeding 25 sqcm complete all as specified and as directed.

S & F in repairs of MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed.

Taking down existing aluminium Door/window shutters of any size, carry out minor repairs with & including replacement of unserviceable top/bottom rail, hinges, rubber beading, etc and also carry out repalcement of broken wire mesh and glass panes wherever necessary (wire mesh and glass pane shall be measured and paid separatly) and refixing the shutter in the same opening complete all as specified and directed.

Supply only for sheet glass 5.50 mm thick ordinary quality and glazing with oil putty/rubber beading in squares exc 0.5 Sqm each pane complete all as specified.

S&F for fabricating powder coated aluminium frame work,door shutter ,windows , partisions with one or more rebates sections of approved tint as required for portions including beading,cleat, screws,fasteners, plugs, for fixing with wall/ceiling columns/beams etc complete all as specified and directed.

S&F for aluminium powder coated window and ventilator shutters, sliding type without sash bar aluminium section weighing 0.55 kg/m including necessary locking arrangement,guide wheels, joining cleats, glazing clips rubber packing anodised alu snap beading screws etc complete all as specified.

S&F for aluminium powder coated sliding door shutters, aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, pad lock, hinges, anodised aluminium snap beading screws etc complete all as specified.

S&F in repair of aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.

S&F in repair of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repair of 100 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring and rubber piece in floor, etc complete all as specified and directed.

S&F in repair of prelaminated particle board 18/19mm thick interior grade, prelaminated on one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame works as in cupboard shutter / cupboard shelves, pelmet, with and including external teak wood lipping 6mm thick and 18/19mm wide fixed with nails on edges complete all as specified and directed.

S&F in repair of 19 mm thick block board grade -2 interior grade ,commercial type fixed with screw to timber frame work as in shelves , Cup board shutter in kitchen etc compllete all as specified and directed.

M&L in repair for 0.9 mm thick decorative laminte type -I of surface finish ,colour and pattern as approved fixed with approved adhesive as maker's instruction complete all as specified and directed.

S&F in repairs of 30 mm wide contineous piano hinges mild steel ,bright finish or electro-galvanised complete all as specified and directed.

S&F in repair of 25 mm dia mild steel PVC coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .

S&F in repair of 300 mm ordinary rat tail rod pattern door spring MS incl roller & plate all as specified and as directed.

S&F in repairs of 100 mm hasp & staple safety type of aluminium anodised including bolt to hinges plate and fixed with screws complete all as specified and directed.

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.

M&L brick work in CM ( 1:4 ) with using sub class `B ` modular brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) on brick or concrete surface finished even and smooth without using extra cement complete all as specified and as directed.

M & L for cement concrete(1:2:4 ) type B1 ( 20 mm graded aggregate) as in coping, surface channel, bearing course, manhole/ drain cahhels and other similar works , etc in including necessary formwork complete all as specified and as directed..

M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finish even and smooth without using extra cement using WPC compound complete all as specified and directed.(Note:Supply only WPC shall be measured and paid separetly)

M&L for 5 mm thick plaster on ceiling in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed .

Supply only Liquid water proofing compound complete all as spesified and directed.

M&L for Extra for forming fair finished surfaces of drain 30 cm inner girth in cement concrete using extra cement including forms mouldy mittered/ stopped ends complete all as specified and as directed..

M&L for PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggregate as in coping complete all as specified and as directed.

M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distember over a coat of over a coat of cement primer over a coat of JK/Birla wall care putty complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed

M & L for preparing new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.

Dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish of the primeses complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4) type B1 using 20 mm graded stone crushed stone aggregate as in flooring complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded as in foundation, sub base of floor, etc complete all as specified and directed

M & L for 75mm thick PCC (1:3:6) type C2, with using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchand including 15mm thick screed bed or bedding layer in CM (1: 6) complete all as specified and as directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1: 6) complete all as specified and directed.

M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

All as per item No 80 above but as in skirting/ dado etc with and including 10mm thik backing coat in CM (1:4) an wall complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size (300x250)mm x 7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of size (450x350)mm x 7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size (25cmX25cm) X 25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed.

M&L for chequered cement concrete tiles with grey cement and pigment of size (40cmX40cm) X 30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.

M & L for 10mm thick joint free 'Endura cool roof (SRI) tile' in light shed floor tiles (square/ rectangular) area of each tiles exc 0.09 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed.

All as per srl No 86 above but as in skirting /dado etc with and including 10 mm thick rendering in CM (1:4) on wall complete all as specified and directed.

M & L in repair for machine cut kota stone slab in flooring 18 to 20mm thick laid & jointed with grey cement mixed with pigment to match the shade of slab including rubbing and mirror polishing finished laid over and including 20mm thick screed bed or bedding layer in CM (1:6) rounding to edges of stone slab as in step, cooking platform and other similar specified and as directed.

M & L in repair for machine cut kota stone slab flooring 18 to 20mm thick as in riser of step, dado and skirting over and including 10mm thick CM (1:4) backing coat on vertical surface of wall with rubbing and mirror polishing finished, rounding to edges of stone slab as in step, cooking platform and other similar situations, etc complete all as specified and as directed.

M&L in repair for 15-18 mm thick green marble of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed.

M&L in repair for 18 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.

M&L in repair for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed.

M & L for PCC (1:2:4) type B-1( 20mm graded stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4) complete all as specified and as directed.

Demolition of cement or lime concret in any despription along with tarfelt treatment and cement mortar bedding from roof removal rubbish out side MD land complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in levelling course and other works as in roof, kerb, coping, padding etc complete all as specified and as directed.

M&L for water proofing treatment to non accessible roof and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Rendering 10mm thick in CM (1;3) mixed with WPC (iii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iv) Laying APP based modified water proofing membrane of weight not less than 3.5kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (v) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed at site.

Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.

All as per item No 97 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed.

S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia and complete all as specified and as directed.

S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) triple layer hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia and complete all as specified and as directed.

Taking down and refixing only 15mm bore old steel tubing and connection in new or old position complete all as specified and as directed.

All as per item no 101 above but 20mm bore complete all as specified and as directed.

S&F in repair of 15mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc complete all as specified and as directed.

S&F in repair of 20mm bore steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc complete all as specified and as directed.

S&F in repair of 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.

S&F in repair of fancy type chromium plated15mm bore bib tap two way cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and directed.

S&F in repair of 15 mm dia stop valves fancy type chromium plated with long shanks fixed with pipes complete all as specified and as directed.

S&F in repair of 15 mm bore pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in pipes complete all as specified and directed.

S&F in repair of 15mm bore CP angle stop cock of screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..

S&F in repair of 15mm bore fancy type chromium plated two way angle valve cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed.

S&F in repair of 15mm bore CP WHB mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and as directed.

S&F in repairs of 15mm bore concealed stop valves fancy type chromium plated with long shanks and cup fixed with pipes complete all as specified and as directed.

S&F in repair of 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes comlete all as directed..

S& F in repair of CP toilet paper holder complete all as specified and as directed.

S&F in repair of vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .

S&F in repair of vitreous china squatting pan `Orissa ' pattern of size 580mmx440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.

M&L in repairs of PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed.

S&F in repair of water jet spray CP 15 mm bore size along with PVC cord to EWC complete all as specified and as directed. .

S&F in repair of health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .

S&F in repair of vitreous china wash hand basin white flat back, size 550mmx400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.

S & F in repairs of vitreous china wash basin white (oval shaped under counter) of size 550mm x 400mm including 32mm brass CP waste coupling complete all as specified and as directed.

S&F in repairs of vitreous china urinal bowl urinal flat back, size of (465x355x265)mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal.

M&L for in repairs of 75mm dia outlet cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate , complete all as specified .

S & F in repairs of 75mm dia outlet PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint complete all as specified and as directed.

S&F in repairs of 100 mm dia CP grating 100mm dia including filiing of white cement with trap, etc complete all as specified .

S&F in repair of kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size (915x460) mm bowl size (410x330x160) mm including taking out unserviceable kitchen sink complete all as specified and as directed.

M&L in repair of stain less steel plate rack for kitchen 1 mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and as directed by Engineer-in-Charge.Note:- Size of plate rack should not be less than (900x1200 )mm and weight of rack shall not be less than 8.5 Kg each.

S&F in repairs of PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.

S&F in repairs of PVC waste pipe for urinal/wash basin/ sink pipe 32mm bore 65cm long complete all as specified and as directed.

S&F in repair 75mm bore of cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors using sand etc including dismantling old pipe complete all as specified and directed.

All as per item No 131 above but for 100mm bore

S&F in repair of 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S&F in repair of 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.

S & F in repair of 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S & F in repair of 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.

S& F in repair CP towel ring, dia not less than 200mm complete all as specified and directed.

Dismantling Asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed by Engr in Charge.

S & F Pre-painted galvalume aluminium zinc GI based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by Engieneer- in Charge. Note: The Prepainted galvalume aluminium zinc GI based profile pattern steel sheet sould be TATA Blue Scope Colourbond XRW or Equivalent

Dismantling of mild steel such as Raften, Purline, Truss of any type and any description, complete all as specified and directed.

M&L for steel work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240, complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

M&L for Running welding in repairs thickness of metal to be welded n.exc 6 mm complete all as specified and directed.

Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete.

S& F in repair of 4 mm thick E Board claasic desinger of size (600x600)mm as in false ceiling or similar work.

S&F in repair of powder coated GI E-grid suspended false ceiling grid system 600x 600mm with main runner 39x29.7x0.8mm, cross tee 39x27.7x0.80mm and wall angle 22.20 x 22.20x0.65mm ceiling suspended with 4mm dia Gl wire hanger fixed with steel dash fasteners or from purlin of the roof with butterfly clips hold down clips etc complete main runner cross tee, wall angle of MS galvanized (PPP CGS) including 4 mm thick HPSC pre-prime non asbestos fiber cement building board (E-classic) decorative finish fixed to aluminum /CGI frame work with hold down clips in false ceilingcomplete all as specified and directed.

M&L in repair for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

M&L for cutting holes in brick walls built in cement mortor at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM (1:1) and making good the dismantled portion in PCC (1:2:4), type B-1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete all as specified and directed.

Preparation of old decorated plastered surfaces or un plastered surfaces of wall including cornice and pillers of and applying one coat of white wash complete all as specified and as directed.

Removal of exisiting treatment on walls including preparation and applying two coat of white wash complete all as specified and as directed.

Removal of exisiting treatment on ceiling including preparation and applying two coat of white wash on ceiling complete all as specified and as directed.

Preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed .

Removal of existing treatment and preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying two coat of oil emulsion distemper complete all as specified and directed .

M&L for complete removal of existing treatment on wall (any number of layers) by scrapping with steel scrapper or any other means and applying two coat of oil emulsion distemper over one coat of primer including one coat 1-2mm thick JK/BIRLA white wall care putty complete all as specified and directed by Engr-in-charge.

M&L preparation of old plastered surface of wall after removal of existing treatment and applying two coat of acrylic emulsion (Plastic emulsion ) over a coat of oil base primer over 1-2mm thick JK/BIRLA white wall care putty complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old decorated wooden or wood based surface of any description ,width or girth including cleaning and preparing the surface including a coat of wood filler and applying french polishing one or more coats complete all as specified & as directed by Engineer in Chage.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.

M&L for preparation of old decorated surfaces of wall including cornices and pillar surfaces and applying one coat of cement base paint on wall complete all as specified and as directed.

M&L for complete removal of existing treatment (any number of layers) on walls scrapping with steel scrapper or any other means,including filling depression of scrapped surface ,priming plaster and other old surface with alkali resistant priming paint and applying two coat of cement base paint all as specified and directed.

M&L RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in kitchen shelves , manhole cover, etc including dismantling of existing RCC work complete all as specified and directed.

M&L form work to suspended slab as in kitchen shelves etc.

M&L for TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.

Dismantling fencing wire mesh, any type

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concreteany section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Excavating post holes or similar holes, each not exceeding 0.5 Cu. M, getting out in Soft/ Loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n.exc 50m & making good surface complete all as specified and directed by Engr in Charge.

M & L for PCC (1:2:4) type B-2 using 40 mm graded aggregate as in foundation ,post, etc complete all as specified and directed by Engr in Charge.

S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.(Fe 410 Qyality A)

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provision of binding wire. complete all as specified and directed by Engr in Charge.

supply only Chain link MS galvanisd fencing, any size or type

S & F of 11 to 15mm dia of neck MS Screw bolts(Machine made ) with hexagonal or square heads at one end and screwed at other end or both end, and screwed end to be fitted with washer and one hexagonal or square n.exc 20 cm long etc complete all as specified and directed.

Dismantling of old kitchen cupboard wooden boarding of any type and any description complete all as specified and as directed.

S & F of PVC and cupboard shelf/ partition/ frame / shutter of 18mm thick side of panel externally impact perfact finish to the shutter and joined together with solvent cement adhesive 8mm thick (4mmx2)x12mm wide PVC sheet is used as gap insert for top & bottom rail, 18mm x 1mm PVC edge lipping is done on top & bottom side using PVC solvent cement adhesive etc complete as per direction of Engr-in-charge, manufacture's specification and drawing.

S & F of shelf/ partition of requried size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf / partition to be edge lipped by (18 x 18) mm as per required length. The front side of the edge visible in the front of the shelf/ partition to be edge coloured by matching colour complete etc complete as per direction of Engr-in-charge, manufacture's specification and drawing.

S & F of stainless steel modular type basket of size (20x16x8) inches with side sliding roller clip over stainless steel channel on both side incld auto hinges of size (3''x2''x1'') fixed complete all as specified and as directed. Make of basket 3 Square, Make of channel- Hettich.

S & F of stainless steel modular type basket of size (20x16x6) inches with side sliding roller clip over stainless steel channel on both side incld auto hinges of size (3''x2''x1'') fixed complete all as specified and as directed. Make of basket 3 Square, Make of channel- Hettich.

S & F of stainless steel modular type basket of size (20x16x4) inches with side sliding roller clip over stainless steel channel on both side incld auto hinges of size (3''x2''x1'') fixed complete all as specified and as directed. Make of basket 3 Square, Make of channel- Hettich.

S & F of 150mm long fancy stainless steel handle for cupboard & ward rope shutter complete all as specified and as directed by Engr-in-charge.

NIDHI CONSTRUCTION

m/s modern builder