Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹49.9 LAccepted-AOC | L1 | Accepted-AOC AOC AWARDED DUE TO L1 BIDDER | |
| 2 | L2₹50.0 L+₹11,344 (0.23%)Rejected-Finance PO PS BOMDILA DISTT WEST KAMENG ARUNACHAL PRADESH 790001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L2 | Rejected-Finance Bidder rejected due high bid value | |
| 3 | L3₹58.1 L+₹8.2 L (16.3%)Rejected-Finance BOMDILA WEST KAMENG ARUNACHAL PRADESH PIN 790 001 | BOMDILA | WEST KAMENG | ARUNACHAL PRADESH | 790001 | L3 | Rejected-Finance Bidder rejected due high bid value | |
| 4 | L4₹58.2 L+₹8.3 L (16.6%)Rejected-Finance | L4 | Rejected-Finance Bidder rejected due high bid value | |
| 5 | L5₹58.3 L+₹8.4 L (16.8%)Rejected-Finance | L5 | Rejected-Finance Bidder rejected due high bid value |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
19 Aug 2022, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
LT COL VASEEM HIROLI
GE 859 EWS, PIN-9136859, C/O 99 APO
PROVISION OF CERTAIN REVENUE AND MINOR WORKS AT RUPA, GACHHAM AND KINZHAMANE IN AOR OF AGE B/R II AND AGE E/M UNDER GE 859 EWS
2022_MES_539872_2
8346/E8
Open Tender
Civil Works
Item Rate
180 days
TENGA VALLEY
AS SPECIFIED IN TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE 859 EWS
₹96,000
Yes
27 Aug 2022
5 Aug 2022
20 Aug 2022
5 Aug 2022
19 Aug 2022
12 Aug 2022
60 days
Amount
Rough excavation exc. 1.5m deep for foundation and getting out in hard/dense soil complete all as specified and directed.
Excavation in trenches not exc 1.5 m in width and 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.
Returning , filling including spreading levelling watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removal of surplus soil of distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 Metre above the starting point complete all as specified and directed.
Spreading and levelling in layers the removed earth n exc 25 cm thick.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard / dense soil complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 (20 mm graded stone aggregate) precast cement concrete block masonary with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.
All as per Srl Item No. 9 here-in-before but TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders.
M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for roughening surfaces of old concrete floor by picking sweeping cleaning and washing down with water to remove dust etc.
Material and labour for providing plain cement concerete (1:3:6) type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes of bore 110 mm on after they are laid and tested complete all as specified and directed.
S&F for 5mm thick printd PVC sheet in strips & channel feathered at the edges for fixing on solid PVC wall lining, and solid PVC partitions inclusive of Solvent cement and fixing at site.
Supply and Fix 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in lieu of screws and washers, in roofs, walls etc. with grade of zinc coating 275 gsm complete all as specified and as directed.
M&L for applying two coats of anti corrosive roof paint over one coat of red oxide primer including preparing new zinc (or galvanised) surfaces to receive painting by coating with mordant solution including washing and cleaning etc on steel surfaces of any description complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer including preparing new steel surfaces to receive painting of any description over 10cm width or girth complete all as specified and directed.
M&L for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1 as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in slabs supported on walls, beams and columns, in floors, roofs, landing and in shelves, chajjas etc complete all as specified and directed.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in columns, piers, pillars posts and struts complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
Material and Labour for Reinforced Cement Concrete 1:2:4 (using 20 mm graded crushed stone aggregate) type B1, as in beams, plinth beams, cantilever, bressummers, lintels over 1.5m span etc complete all as specified and directed. Note : Reinforcement and Formwork shall be measured and paid separately.
M&L for Chequered cement concrete tiles 200x200x25mm etc. set and jointed and pointed in neat cement slurry in floor with grey cement and pigment all as directed.
Material and labour for 20 mm thick machine cut granite work, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and directed.
M&L for 15 mm thick screed bed in CM 1:6 finished rough for laying floor tiles.
M&L for 20 mm thick screed bed in CM 1:6 finished rough for laying floor tiles.
M&L for 10mm thick heavy duty coloured foothpath/ parking tiles of size 300x300mm and pointed in matching colour pigment in floors.
M&L for 2nd class HW in scantling , clean sawn in framed work.
Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for 15mm thick rendering in cement mortar (1:6) mixed with WPC @ 3% by weight of cement on brick or concrete wall surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately)
Supply only integral water proofing compound ISI marked on pkt.
Preparing newly plastered surfaces of walls and applying three coats of whitewash on walls.
Preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer.
Material and labour for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound, Grade `A' complete all as specified and directed.
Material and labour for 100 mm thick plain cement concrete 1:2:4 type B1 ( using 20mm graded crushed stone aggregate) as in floor finished the surfaces or making impressions of expanded metal whilst the concrete is green w/o using extra cement complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter.
Formwork to the sides of pillars, posts, struts, piers, columns and stanchions.
Formwork to the sides and soffits of floor or roof beams, lintel, cantilever, shelves etc.
M&L for 150mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in subbase complete all as specified and directed.
M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling, walls or retaining walls, any thickness, size or shape including pilasters, butresses columns, pillars, boundary pillars and post (including caps and bases) and mass concrete complete all as specified and directed.
M&L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete finished rough to receive tiles complete all as specified and directed.
M&L Glazed coloured ceramic tiles (450 x 350) / (350 x 250) x 6 to 7 mm thick as on vertical surfaces of wall set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.
M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade.
S&F MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachement with riveted, bolted or welded attachement.
S&F steel work in tubular trusses including special shaped washers etc, complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240.
S&F mild steel straight portion for roof including cutting drilling holes, notching for wires etc and flat iron fillets for securing wire mesh etc confirming to Gde Fe 410-0 or Fe 310-0 complete all as specified and directed.
S&F 6mm thick Polycarbonate sheet including Aluminium channels as required at top and bottom in required shape with rubber gasket anfd fixed with self drilling screws.
M&L for PCC (1:2:4) type B-1(using 20mm graded aggregates) as in roof kerbs or mud stops or plinth wall rounded or chamfered on edges, coping, in benching etc including necessary formwork complete all as specified and directed.
S&F bib tap chromium plated , fancy type, cast copper alloy, 15mm dia with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed.
S&F 2 way bib tap chromium plated , fancy type, with quarter turn operating system incl wall flange screwed down for iron pipe complete all as specified and directed. Make: Jaquar OPP-CHR-15041PM or equivalent model of Makes specifed in PS here-in-after.
S & F angle stop valve, fancy type, chromium plated 15mm dia stop cock, with quarter turn operating system incl wall flange screwed down for iron pipe complete all as specified and directed. Make: Jaquar OPP-CHR-15053PM or equivalent model of Makes specifed in PS here-in-after. complete all as specified
S & F stop valve, fancy type, chromium plated 15mm dia stop cock, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S & F stop valve, fancy type, chromium plated 20mm dia stop cock, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified
S&F mild steel work as in framed work of angle or other section with gusset plate braces etc complete.
S&F single lever wall mixer 3 in 1 system with provision for both hand shower and over head shower complete connecting legs and wall flange (without hand and overhead shower) make Jaquar OPP-CHR-15125PM and equivalent model in ROCA/ KOHLER.
S&F for exposed shower pipe with provision for showers with sliding holder for hand shower wall bracket (without shower). Make : JAQUAR SHA-CHR-1217R and equivalent model in ROCA/ KOHLER
S&F for over head shower rose ABS body chrome plated. Make Jaquar.
S&F hand shower eith 1.5 m long CP flexible pipe for 3-in-1 mixer Make Jaquar and equivalent model in Roca/ Kohler
S&F hand shower (health faucet) with 1 metre long easy flex tube in chrome finish and wall hook screwed down for 15mm bore iron pipe. Make: Jaquar and equivalent model in Roca/Kohler
S&F central hole basin mixer CP single lever operating system for 15mm GI pipe complete all as specified and directed. Make: Jaquar and equivalent model in Roca/Kohler
S & F PVC water storage tanks of 1000 ltrs capacity rotational moulded (multi layered cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S&F ball brass valves, high pressure, with polyethene float and flynut complete screwed for iron pipe of 20mm dia all as specified
S&F 15 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.
S&F 20 mm bore Galvanized Steel tubes, medium grade with all fittings for water supply pipes fixed to walls or laid in trenches complete all as specified and directed.
Supply and fix PVC (SWR) pipes single socketed 110 mm dia in any length with rubber ring joints fixed to walls, clamps/hook for holding of pipe etc complete all as specified and directed.
S&F PVC connection of 15 mm size with PTMT nuts of length 450mm.
Material and labour for plain cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in surface channels and drains including necessary form work complete all as specified and directed.
Extra for forming fair finished drain for channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds , mitred/stopped ends etc.
M&L for 75 mm thick PCC (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in sub-base complete all as specified and directed.
Material and Labour for Point wiring with 1.50 sq mm (nominal area), two single core PVC insulated unsheathed , 1100 volts grade, multi-stranded copper conductor FRLS Grade, in and including PVC casing capping with accessories with teak wood boxes and 3 mm thick plastic laminated sheet top cover size with all fittings and accessories including MS pressed steel terminal boxes of 1.22 mm thick of suitable size duly painted with red oxide metal primer for housing/mounting brackets switches,sockets etc, including PVC insulated unsheathed single core multi-stranded copper conductor FRLS Grade cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly for one light/point controlled by one way switch complete all as specified and directed.
All as per item No 71 here-in-before but for one 3 Pin 5 Amp socket outlet on the same board with other switches complete all as specified and directed
All as per item No 71 here-in-before but for one 3 Pin 5 Amp switch outlet controled by one switch on the independent board complete all as specified and directed
All as per item No 71 here-in-before but for 3 pin 15 Amps socket outlet independant board drawn from DB and including PVC insulated multi stranded copper conductor 4.0 sqmm 1100 volts FRLS grade and earth continuity wire 4.0 sqmm PVC insulated copper wire (Green) FRLS grade including PVC casing and capping complete all as specified and directed.
S&F switch socket combination 2 in 1 , 5 pin, 5 Amp, flush type , 240 volts complete all as specified and directed.
S&F switch socket combination 2 in 1 , 5 pin, 15 Amp, flush type , 240 volts complete all as specified and directed.
S&F switch piano flush type SP, one way, 5 Amp , 240 Volts complete all as specified and directed.
Supply and fix ceiling rose surface bakelite 65 x 50 mm two to three terminals AC 230 volts complete all as specified and directed.
Fixing of existing Geyser from its original position to another position after repair work of walls using suitable size of fastners as per site requirement complete all as specified and directed.
S&F wall mounted decorative type bed side light fitting upto 20 W, complete with driver, holder, lamp including connecting up with three core flexible copper cable of suitable size.
S&F wall mounted decorative ornamental type light fitting upto 20 W, complete with driver, holder, LED lamp including connecting up with three core flexible copper cable of suitable size.
S&F square shaped recess/ suspended mounted environmental friendly new generation asthetically ultra modern with high brightness LEDs as light source LED flat panel,36 watt, 2'x2' size, complete with driver and all accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed. Make : Crompton Greaves Cat Part No. LCTLRNE-36-FO-CDL/WW or equivalent model of make PHILIPS/ BAJAJ/ HAVELLS / EVEREADY
S&F LED building security light 30 watt, 230 V complete with all acessories and including connecting up to ceiling rose with 0.5 sqmm 3 core copper flexible cable including suitable size brackets for fixing complete all as specified and directed. Make : Crompton Greaves Cat Part No. LSTS-30-CDL/NL-M or equivalent model of make PHILIPS/ BAJAJ/ HAVELLS / EVEREADY
Supply and fix sheet metal enclosures for DBs (Double door type) when MCB SPN 8way with 200 Amps rated bus bar complete all as specified and directed.
Supply and fix MCB SP 6-32 Amp 240 volts,50 HZ , confirm to IS /IEC 60898 breaking capacity of 10 KA, C-curve complete all as specified and directed.
S&F MCB SP&N , 35 to 60 Amps, 240 volts, 'C' series, complete all as specified and directed.
Supply and laying sub main wiring two single core 6 sq mm stranded copper conductor of red & Black colour including 6 sq mm green colour stranded copper conductor as earth continuity conductor connected to common earth dolly including PVC casing and caping of suitable size for accomadating the wires including taking down existing submain wiring complete all as specified and directed. Note : Two runs of 6 sq mm copper conductor wire, One run of 6 sq mm earth continuity conductor and one run of PVC casing and capping shall be measured as a unit.
M/s Paramount Association of India
M/S R N ENTERPRISES
M/S SUNRISE CONSTRUCTION AND CO
D.P. Traders
M/S POLAR AGENCIES
M/S SM ANSARI
M/S DKT CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .