8452 REPAIR TO ROOF, FLOORING, JOINERY, SANITARY FITTINGS, PLASTERING, ATT,AND OTHER MISC WORKS AT UNDER GE(M) AF JALAHALLI , BANGALORE

Amount

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for.

Demolition of cement Concrete (Un-reinforced) above ground floors exc 15 cm thick all as specified and directed by Engr-in-charge

Demolition of brick work, stone massonery, PCC block walling built in cement mortar or cement lime mortar including all quoins, arches etc complete

Demolition of cement Concrete (Reinforced )of any description and in any position not otherwise specifically provided for

Dismantling of MS work of any description not otherwise described.

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons cooking plateform etc. Laid bedded and pointed in any mortar and all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering and all as specified and directed.

Dismantling battens for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm.

Dismantling single layer Mangalore pattern or similar tiles in roofing including ridge tiles.

Dismantling timber scantlings 40 sq. cm and over in section, in any position

Dismantling boarding of any description and fixed in any position fixed with nails or screws.

Dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls of any bore including fittings.

Material and labour Cement Concrete 1:4:8 type D-2 (using 40 mm graded crushed stone agg as in foundation filling or for mass concrete complete all as specified and directed.

Material and labour Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete in sunken floors all as specified.

Material and labour for PCC 1:2:4 type B-2 using 40 mm graded agg as in foundations, fiilling and mass concrete all as specified and directed

Material and labour for 40mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement and all as specified and directed

Material and labour for 50mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement and all as specified and directed

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates complete finished fair and even all as specified and directed.

Material and labour for 75mm thk PCC 1:3:6 type C-2 using 20mm graded agg as in flooring finished even and rough and all as specified and directed

Material and labour 75mm thick PCC 1:4:8 type D-2 as in sub base, Floors, Paving finished even and fair complete all as specified.

Material and labour for 75mm thk PCC 1:2:4 type B-1 using 20mm graded agg as in flooring finished even and smooth without using extra cement and all as specified and directed

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 20mm graded stone aggregates as in plinth protection finished fair and even with out using extra cement including filling witn bitumen filler all as specified and directed.

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes under floor and all as specified and directed.

Material and labour for rendering 10mm thick in CM 1:3 on brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and all as specified and directed.

All as per item No 26 hereinbefore but as in skirting including necessary cutting of tiles.

Material and labour for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and labour for ceramic coloured tiles of size 300x200mmx7 to 8 mm thick, on verticals surfaces, set and jointed inneat cement slurry and pointed in coloured / white cement to match the tiles and all as specified and directed.

Material and labour Glazed Ceramic designer coloured tiles of size 300x600mmx7-8 mm thick, on verticals surfaces, including highlighter concept glossy super deluxe set and jointed inneat cement slurry and pointed in coloured cement to match the tiles all as specified and directed.

All as per item No 30 hereinbefore but as in skirting including necessary cutting of tiles.

Material and labour for 400x400x20mm thick prepolished cement concrete chequerred tiles jointed in neat cement slurry and pointed in white or coloured cement to match the color of fills incl screed bed of 20mm thick in CM (1:6) and all as specified and directed by EIC.

Material and labour for 25 mm thick PCC (1:2:4 ) type B1 using 20 mm graded stone agg as in sub base of floor and complete all as specified and directed.

Material and labour for Glass dividing strips 3mm thick, 38mm wide and inserted in position to conform to design complete all as specified and directed.

Material and labour for 10mm thick coloured vitrified tiles (Square/rectangular ) polished ,area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as per item No 35 hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for Chequered cement concrete tiles 30cm x 30cm x 25mm thick with white cement and pigment, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.

Material and labour for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and over 15mm thick rendering in CM (1:4) complete all as specified and as directed.

Taking down rough dressed stone laid in plinth protection/drain walls and removing mortar from and cleaning stones; stacking for measurement including all extra handling and removal and disposing off rubbish

Material and labour for 75 mm thick rough dressed stone slab flooring bedded, jointed and pointed in cement mortar 1:3 and all as specified and directed.

All as per item No 40 here in before but except stone slab.

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls.

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as internal surfaces of walls.

All as per item No 44 hereinbefore but 10mm thick in CM 1:3 on ceiling,chajja,roof projection etc.

Material and labour for rendering 15mm thick in CM 1:4 mixed with water proofing compound (over external/roof plaster uner WPT) for fair faces of brick work or concrete surfaces finished even and smooth without using extra cement. Note : WPC shall be measured & paid seperately.

Material and labour for rendering 15mm thick in CM 1:3 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 20mm thick in CM 1:3 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Rendering 15mm thick in CM (1:3) on sunken concrete floor surfaces mixed with integral water proofing compound finished even & smooth without using extra cement. Note : WPC shall be measured & paid seperately

M& L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces

Material and labour for APP polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.

Material and labour for applying oil bound primer @ 0.20 Kg / sqm and providing APP modified water proofing membrane weighing not less than 4 Kg / Sqm reinforced with min 160 gm / Sqm non woven polyster mat and a coat of hot blown bitumen of 90/15 @ 1.20 Kg/ Sqm applied on the top of polymeric membrane and finally finished with a coat of solar reflective bituminous aluminium paint @ 100gms / sqm for roof treatment and all as specified and directed.

Stripping off tarfelt from old roof surfaces complete all as specified and as directed.

Providing and applying single component acrylic polymer modified, fibre reinforced waterproof coating Brushbond Roof Guard in 3 coats of application @ 0.5 litre/m2/coat, The Product should have following Properties: Solid Content : 70 % Tensile strength (ASTM D 412) : 1.10 MPa

Material and labour for 0.50mm thick Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.

Material and labour for 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based plain steel sheet AZ 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.

Material and labour racking out joints / pointing to squared rubble masonry, coursed or uncoursed built in cement or cement lime mortar and all as specified and directed.

Material and labour keyed pointed in CM 1:4 for squared rubble masonry and all as specified and directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

Material and labour pre-cast PCC 1:3:6 type C1 (20 mm graded agg) cement concrete block masonry with solid blocks exc. 10cm in width and set in cement mortar 1:6 .

All as per ser No 61 here-in-before but except block

Material and labour PCC 1:2:4, type B0 (using 12.5 mm thk graded stone aggregate) as in bed plates, coping, levelling concrete, laid to slope etc all as specified and directed.

Supply and fixing in repairs mild steel powder coated pelmet rods 25 mm dia including 02 Nos of brackets, 02 Nos of finials or side brackets as per site requirement and 10 No of curtain rings in each curtain rod complete all as specified and as directed

Taking down cement plaster of any description incl raking out joints, haking for key scrubbing down with water etc complete

Supply only integral water proofing compound ISI marked

Supply only liquid water proofing compound

Taking down shutters of any description exceeding 1Sqm, not exceeding 2 Sqm each and Resecuring, easing, adjusting and refixing in same opening.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames.

Ditto all as per item No 69 above but exc 1.5 Sqm but nexc 4 Sqm

Taking down shutters of any description exceeding 1Sqm and not exceeding 2 Sqm each.

Ditto all as per item No 71 above but n exc 1 Sqm

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints complete all as specified.

Material and labour for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm including taking down of old fillets complete all as specified..

Supply and fixing 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) complete all as specified.

All as per item No 75 hereinbefore but divided into squares, with plain chamfered or rounded, mitred and ribeted sash bars any numbers as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b) complete all as specified.

Supplying and fixing of PVC hollow door frame of size 50mm x 47mm with a wall thickness of 5mm made out of extruded 5mm thick rigid PVC foam sheet, mitre cut at two corners and joined with two nos of 150mm long brackets of 15mm x 15mm MS square tube. The two vertical door profiles are to be reinforced with 19mm x 19mm MS square tube of 19 gauge, EPDM rubber gasket, weather seal to be provided through out the frame. The doorframe shall be fixed to the wall using 65/100mm long MS screws through the frame using PVC fasteners. A minimum of four nos of screws to be provided for each vertical member and minimum of two nos of screws for each horizontal member complete as per Manufacturer’s specification and drawing and as directed.

Supply and fixing factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

Supply and fixing 30 mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixing factory made, 2nd class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supply and fixing 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing 150 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed

Supply and fixing in repair 150 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed

Supply and fixing 125 mm long Aluminium anodised, barrel tower bolt of extruded section and fixed

Supply and fixing 150 mm long Extruded Aluminium anodised alloy handles , fabricated type,

Supply and fixing in repair 150 mm long Extruded Aluminium anodised alloy handles , fabricated type,

Supply and fixing 125 mm long Extruded Aluminium anodised alloy handles , fabricated type,

Supply and fixing 100 mm long extruded aluminium alloy butt hinge with galvanised mild steel hinge pin, anodised and fixed, type B-21

Supply and fixing 75 mm long Butt hinges, heavy weight, cold rolled mild steel with galvanised mild steel hinge pin.

Supply and fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed

Supply and fixing in repair MS Butt hinges of size 100 mm, cutting out existing hinges from frame, necessary welding, replaces broken hinges etc and making good disturbed portion, painting all as specified and directed by Engr-in-charge.

Supply and fixing 125 mm long Butt hinges, heavy weight, cold rolled mild steel with galvanised mild steel hinge pin.

Supply and fixing 100 mm long Stainless steel Butt hinges extruded.

Material and labour for making groove in plaster of size 10mm width and 8mm depth in junction of wall and Col/Beam and applying Sika Primer 3N and filling with Sikaflex Construction (AP) with 112gm sealant/rm incl thermocol rod backup as per manufacturer's instructions and plastered, painting the disturbed portion with chiken wiremesh all as specified and directed by EIC

Providing cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in roof levelling concrete, laid to slope for further treatment with using integral water proofing compound.(WPC shall be measured separately)

Taking out steel water tubing and connections including cleaning for refixing 15 mm dia.

All as per item No 96 hereinbefore but 20mm dia.

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth.

Cutting chases, pinning in. brick work / stone concrete surfaces and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth and all as specified and directed.

Material and labour for Galvanised steel tubing 15mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors.

Material and labour for Gavanised steel tubing 20mm bore of tube medium grade with all fittings fixed complete to walls and ceilings or laid in floors.

Refixing 15mm dia old steel tubing and connection in new or old position (wall ceiling floor etc including cutting altering the size or changing the new fittings etc complete all as specified .

All as per item No 102 hereinbefore but 20mm dia.

Supply and fixing in repairs Vitreous china Urinal, Half stall type, white including flush pipe and waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 75 mm with PVC clamps and saddles

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls bore of pipe 110 mm with PVC clamps and saddles including taking down existing pipe and fittings etc complete all as specified .

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm

Supply and fixing PVC (SWR) bends any radius of bore 75 mm bore

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 110 mm

Supply and fixing PVC (SWR) bends any radius of bore 110 mm bore

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm

Supply and fixing 125/ 110 mm bore PVC (SWR) gully trap plain with grating incl jointing with solvent cement

Supply and fixing of PVC (SWR) floor trap 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repairs.

Supply and fixing 110mm bore PVC (SWR) vent cowl

Supply and fixing 75mm bore PVC (SWR) vent cowl

Supply and fixing in repairs of plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

Supply and fixing in repairs viterous china wash down water close (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified

Supply and fixing vitreous china white wash hand basin flat back size 550x400mm 'includingCI/MS brackets including cutting for and pinning in brackets but excluding waste pipe.

Supply and fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe antisyphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified

Taking down defective aluminium door of size n.exc 4 sqm with glass panes and repairing floor stopper, bearing alignment. including replacement of Rooler/locking arrangement and pivet etc required for proper functioning and refixing in the same position.

Supply and fixing in repairs stop valves fancy type chromium plated with long shank and cup ( concealed type ) screwed for iron pipe of 15 mm bore

All as per item 123 hereinbefore but angle valve

Supply and fixing in repairs Bib taps fancy type chronium plated with crutch or butterfly handle screwed down screwed for galvanised iron pipe or for brass ferrule and fixed complete for 15 mm bore

Supply and fixing in repairs pillar tap with capstan heads chronium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

Supply and fixing in repairs Bib tap standard of PTMT of fancy type of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms

Supply and fixing in repair angular stop valve 15 mm chromium plated, fancy type screwed down high pressure screwed both ends for iron pipe for 15 mm bore.

Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with steel fillet in steel window by cutting out, punching the revets al as specified and directed by Engr-in-charge.

Supply and fix in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of apertures 1.18 mm and fixed with tinned tacks or galvanized wire stapples al as specified and directed by Engr-in-charge.

Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in CM to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking out old steel sink and fittings with cement beadings and demilition of supports etc and making good the destrubed surfaces all as directed.

Hacking out old broken glass panes from metal / wooden frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.

All as per item No. 132 here-in-before but glass pane exc. 0.5 sqm in each pane.

Supply and fix 5 mm thick plain glass pane to the existing aluminium window/ door of any size including necessary rubber gasket and aluminium clips etc complete including taking down old broken glass pane complete

Supply and fixing in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete.

Supply and fixing in repair grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB & Sink

Making arrangement of scaffolding in buildings, cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with existing complete all as directed by Enginner-in-charge.

Material and labour Providing and injecting chemical emulsion for post construction anti termite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per liner meter including drilling and plugging holes etc in apron complete all as specified and directed

Material and labour for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors and all as specified and directed

Material and labour for post construction Anti termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same and all as specified and directed

Material and labour for grinding and polishing of terrazzo floor with machine including wax polishing all as specified and directed by Engr-in- charge.

All as per item No.142 above but in skirting/dado (grinding/ polishing by hand)

Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete

Supply and fixing Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 all as specified and directed

Material and labour MS Plates 6mm thick (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed by Engr-in-Charge

Supply and fixing Mild steel, plain, black sheet 0.80mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/ loose soile.

Taking down steel windows / ventilators including all fittings and all as specified and directed.

Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay etc complete all as specified and directed.

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded and all as specified and directed.

All as per ser No 151 here-in-before but windows with side hung shutters without glazing bars and all as specified and directed.

Supply and fixing 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing 3mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutter complete all as specified and directed .

Supply and fixing in repair door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutter complete all as specified and directed .

Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing brass mortise lock (6 levers), vertical type, size 100mm long complete all as specified and directed .

Supply and fixing in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and fixing in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete and all as specified and directed.

Material and labour for second class hardwood as in scantlings clean sawn timber framed and fixed.

Material and labour for roof tiles Mangalore pattern inter locking at side joints laid dry all as specified.

All as per item No 164 above but except tiles.

Material and labour for ridge or hip tiles to suit Mangalore pattern roofing tiles bedded and jointed in cement mortar 1:6

Material and labour for 2nd class hard wood clean sawn batten at 30 cm centre to centre sectional area exc 5 & n.exc 15 Sqcm .

All as per item No.167 above but fixing only

Supply and fixing 18/19 mm thick Block boards, grade 2 quality interior grade commercial type, fixed withscrews to timber frame work

Supply and fixing 18/19mm thick prelaminated partical board of one side decorative face of exterior grade as in cup board shutters, shelves & partition.

Supply and fixing 6mm thick Plywood grade BWR type BB fixed with nails to timber frame work and all as specified and directed.

Material and labour for distempering walls with two coats of washable distemper oil emulsion on new surfaes over a coat of alkali resistant priming paint (white or tinted) as directed of distempered and painted surfaces as in preparatory work to give uniform and smooth finish all as specified.

Material and labour for two coats of cement based paint over a coat of primer on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Material and labour applying one coat of oil emulsion distemper over old decorated wall surfaces of any description including necessary preparation and all as specified and directed by Engg in Charge. (Make : Asian Paints)

Material and labour for preparation of old decorated surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying one Coat of cement base paint complete all as specified and as directed.

Preparation of plastered or unplastered old decorated surfaces of walls including cleaning by brooming down scrapping down smoke & moulds efflorescent salts and applying one coat of white wash on walls all as specified

All as per item No 176 hereinbefore but on ceiling on surfaces.

Material & Labour for preparation of preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etc and applying three coats of white wash on new surfaces

Material and labour for preparation of new wooden surfaces of any description and applying two coats of synthetic enamel paint over a coat of pink wood primer and all as specified and directed.

Material and labour preparation on new steel surfaces of any description exc10cm width or girth including preparation and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.

Material and labour for preparation of old external surfaces of walls including cornices, plasters etc (plastered or unplastered surfaces) and applying one coats of exterior emulsion coloured complete all as per manufacture intructions all as specified and as directed. Make:Asian paints ACE or equivalent to Berger wall masta, shalimar Shaktiman.

Material and labour for preparation of Old painted surfaces of steel and iron work of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint any tint complete all as specified and directed

Material and labour for preparation of Old wooden surfaces of any description and applying one coats of synthetic enamel paint all as specified and directed

Supply and fixing in repairs 150 mm aluminium floor door stopper complete as directed by EIC including taking down old one.

Supply and fixing in repairs 100 mm size long MS steel windows handles left and right both complete as directed by EIC including taking down old one.

Supply and fixing 300 mm size MS steel windows pegstay complete as directed by EIC including taking down old one.

Supply and fixing in repairs MS Mortice lock, 4 levers vertical type, size 100 mm and all as specified and directed

Supply and fixing 125 mm long medium weight MS Butt hinges extruded.

Supply and fixing stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or fillets complete as directed by EIC

Supply and fixing in repair stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or old serviceable fillets complete as directed by EIC

Material and labour walling Bangalore type masonry built in CM 1:6 well bonded bedded solidly head including hammer dressing of face beds and jointed as specified

All as per ser No 191 here-in-before but except stones

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence slats, treading oil, greasy spots etc and applying one coat of cement based emulsion and all as specified and directed. (Make : Shalimar Shaktiman, Berger wall masta, & Asian Paints)

Material and labour precast reinforced cement concrete (1:2:4)typeB-1using 20mm graded stone aggregate as in cover slabs, shelves and finishing exposed surfaces fair & even including necessary form work and set in CM 1:6 all as specified.

Material and labour TMT bars of 6 to 8 mm dia & over cut to length bent to shape required incl cranking binding spirally for hooking for columns & bonding with MS wire (annealed) not less than 0.90 mm dia and all as specified and directed.

Taking down Aluminium door / window shutter with frame and all as specified and directed.

Supply and fixing anodised aluminium powder coated frame or grills as per pattern approved by GE for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc powder coating minimum thickness of powder coating 50 micron complete with sliding channel etc all as specified. frame on compression as per Aluminium section 100x45x2.5mm thick)

Supply and fixing anodised aluminium powder coated side hung / sliding door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, anodised aluminium snap beading screws, locking arrangements etc complete all as specified with powder coating of any colour.

Supply and fixing anodised aluminium powder coated sliding window and ventilator frame with shutters, fixed type without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, anodised aluminium snap beading screws etc complete all as specified.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and fixing of 20mm outer dia Female Brass Threaded Adaptor (FTA/ FBTACPVC complete all as specified.

Supplying fixing of 25mm outer dia CPVC union complete all as specified.

Supplying and fixing of 20mm outer dia CPVC brass elbow and all as specified.

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply and fixing in repairs PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer all as specified

Supply and fixing in repairs PVC waste pipe 32mm bore for WHB

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of following sizes

Material and labour for servicing/ easisng of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges,handles ,stay etc and making good disturbed portion painting all as specified as directed by Engineer-in-charge

Taking down existing manually operated steel rolling shuttesr area n.exc 10 Sqm each and erecting in same position, including easening, applying of greasing in rolling shutters channel and all as specified and directed by EIC.

Supply & fixing in repairs of steel rolling shutter springs suitable for manually operated steel rolling shutters complete all as specified and directed by EIC.

Supply & fixing in repairs 50mm dia MS pipe shaft for steel rolling shutters suitably drilled and fixed in position for rolling shutters complete all as specified and directed by EIC.

Material and labour for 2mm thick wall putty on walls including complete removal of existing existing any type of treatment.

Material and labour for cleaning the existing tiles joints and filling the tiles hollow joints with white cement including grouting of floor trap surroundings with white cement to the entire satisfaction of the Engr-in-charge.

LAKSHMI CONSTRUCTIONS

SREE BUILDERS

Aditya Associates