WBPWD/SEWEC /BED / NIQ/MSC-03 OF 2018-2019 (3rd Call)

Amount

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Polycab/Finolex/KEI/Havells) in 19 mm bore, 3 mm thick polythen pipe [PVC Rigid Conduit only for horizontal run & above false ceiling but shaddeling with ceiling and vertical run concealed] complete with all accessories embedded in wall to light/fan/call bell points with switch (make Legrand--Myrius/Simens) fixed on metal flush box (modular type switch board) 8 or 9/12 module (cat no 6890 42/29 make legrand) moduler white surrounds on wall incl. necy. connections and making earthing attachment flushed in wall incl. mending good damages to original finish for seminar room, a)Avg. run 8 mtr

b) Avg. run 10 mtr

Do-Do – on board 5A 3/5 pin modular plug point

Distn. wiring with 1.1KV grade single core stranded copper conductor PVC insulated and unsheathed copper wire (Polycab/Finolex/KEI/Havells) in 20x20mm PVC casing and capping19/25mm dia 3 mm thick polythene pipe complete with all accessories etc. embedded in wall (for TPN DB to SPN DB, TPN DB to A.C point and for separate 15A plug point/Computer point, running meter for stair case & coridoor wiring and Meter loop VTPN to TPN DB.)

i)2x6sq mm+2x2.5sq mm

ii)2x4sq mm+1x2.5sq mm

iii) 2x2.5sq mm+1x1.5sq mm

iv) 2x1.5sq mm+1x1.5sq mm

v) 4x10 sq mm+2x4sq mm

S&F of required size solderless Cu socket of following Cu wires.

i) 6sq mm

ii) 4sq mm

iii) 10 sq mm

Supplying and fixing 415 V, 16-32A per way, TPN MCBDB with SS enclosure double-door with IP-42/43 protection with Four Pole Isolators as incomer and SPMCBs ('C' Curve, 10 kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (make-Legrand/Siemens/Crabtree) as to GS.

a)4way, 63A FP isolator, & 12 nos. SPMCB (similar to Legrand, cat no. 607715/siemens/Crabtree)

Supplying and fixing 250 V, 6-10A per way, SPN MCBDB with SS enclosure double-door with IP-42/43 protection with DP Isolators as incomer and SPMCBs ('C' Curve, 10kA) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (make-Legrand/Siemens) as to GS

a) (2+10) way, 40A DP Isolator, 8nos. SPMCB

S & delivery of single/Twin commercial LED fittings with all accessories(make:-Philips/ Syska / Crompton/Wipro/Bajaj)

a)Single LED fittings (Phlips- TMC 501 P 1xT- LED 22W/Syska / Crompton/Wipro/Bajaj)

b) Twin LED fittings(cat No.- TMC 501 P 2xT- LED 22W)

Fixing only single/twin LED light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side inserted within the ceiling reinforcement and other side connected with the suitable size of bolts and nuts incl. S&F EI conduit “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. 2x24/0.20 mm flexible copper wire of 1.10 mt. length

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm flexible copper wire of 1.10 mt. length.

S & D of ceiling fans (make-Orient-summer king/C.G-zapar/Usha-striker). of following dimensions a) 48”

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required with 2x1.5 sq mm flexible cu wire.

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting.

S&F of 230V, 100W step type modular electronic fan regulator

S & Fixing exhaust fan, Louver shutter after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of dia(make EPC)

a) 9”Exhaust fan (1370 RPM)

Supplying & fixing 250 V 3/6 Pin 5/15 A flush type plug socket with 15 A modular type switch on fixed on metal flush box (modular type switch board) 3 or 4 module (cat no 6890 3/4 make Legrand /Crabtree) moduler white surrounds on wall incl. necy. connections and making earthing attachment flushed in wall incl. mending good damages to original finish

Supplying & fixing 250 V 3/6 Pin 15 A flush type plug socket(2nos.) with 15 A modular type (2nos) switch on fixed on metal flush box (modular type switch board) or 6 module (make- Legrand- myrius / Similar of Crabtree) moduler white surrounds on wall incl. necy. connections and making earthing attachment flushed in wall incl. mending good damages to original finish

S&F 250 volt of moduler type (12 module) plug socket computer board(6890 11) of comprising of lowing accessories.(make Legrand/similar of Crabtree) a)6/16A switch &socket---1 Set b)6A,-------do------------(--do--)-----2Sets Incl. Necessary interconnection by pvc insulated copper wire flushed in wall.

S&F power unit for Room Air-conditioner machine on MS/PVC modular box comprises with single phase motor starter incl. earthing attachment (Legrand/North West Wipro)

S&F 25A 6 pin socket with 25A plug top on suitable size MS/PVC box. (Approved make)

DELTA BROTHERS

SREE GURU ENGINEERING