CAMOUFLAGE TO CERTAIN BUILDING AND BOUNDARY WALL IN DOMESTIC AREA ZHOPRA COMPLEX AT AF STN SIRSA

Amount

M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone mixed with Coarse Sand and Cement in the Ratio 1:1:1 shall be applied and finish Even, including taking down of the same,complete all as specified and as directed by Engineer-in-Charge.

M&L for 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs,walls etc,fixed with L-type or J-type hook bolts, including Dismantling of the same ,complete all as specified and as directed by Engineer-in-Charge.

M&L for Raking out joints & flush pointing in Cement mortar 1:3 to brick tiles, laid flat, in roofs, etc., complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing old Plastered Surfaces of Walls by Complete Removing of existing Surfaces Treatment and applying wall care putty, rubbing to obtained a Smooth Surface, applying Two Coats of Weather Coat Exterior Paint (in New Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge.. NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush ,washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris.

M&L Preparing untreated old Brick or concrete surface of roof applying Two Coats of Cement base paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush , washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with cement slurry wash.

M&L for black corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with L or J-type screwss and washers, bent to curve ,in roofs, walls etc., including dismantling of the same,complete all as specified and as directed by Engineer-in-Charge.

M&L preparing New corrugated sheets in roof /walls applying Two Coats of synthetic Enamel Paint (in Camouflage pattern) with approved Tint over a coat of Red oxide zinc chrome Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge.

M&L preparing untreated old AC sheets in roof applying Two Coats of cement base paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush , washed well and allow water to dry.

M&L Rendering (External) 15mm thick in CM 1:4 on Brick Walls or on Concrete Surfaces upto double storey, mixing WPC as per manufacturers instructions, Plastered Surfaces finished Fair and Even, Including taking down of the same ,complete all as specified and as directed by Engineer-in-Charge. NOTE:- WPC will be Measured and Paid under appropriate Item.

Supply only Integral Water Proofing Compound, ISI Marked, as approved, complete all as specified and as directed by Engineer-in-Charge.

M&L Preparing New Plastered Surfaces of Walls by applying wall care putty, rubbing to obtained a Smooth Surface, applying Two Coats of Weather Coat Exterior Paint (in Camouflage pattern) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge. NOTE: Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt or dust,lichen, algae, fungi or any organic growth by use of stiff brush ,washed well and allow water to dry. (b) All cracks, voids and minor damages shall be patched/repaired prior to application of paint with white cement putty or with Plaster of Paris.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of Weather Coat Exterior Paint (in New Camuflage pattern as ordered) with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed by Engineer-in-Charge.

M&L preparing Old treated/painted Steel and Iron Surfaces of any description, applying one Coats of Synthetic Enamel Paint (First quality) for Y shape Mild steel angle frame (area 0.25 Sqm and n exc 0.50 sqm each) fixed on boundary walls (straining/supported to barbes wire and concertina coil) , complete all as specified and as directed by Engineer-in-Charge.

M&L preparing Old treated/ painted Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) for CGI/PGI Sheet in roofing, etc. (in New Camouflage Pattern) , complete all as specified and as directed by Engineer-in-Charge. (Height of building is approx 6.0 meter.) NOTE:- Rates quoted by the tenderer are included with following apllication as under :- (a) The surfaces shall be cleaned to remove loose dirt ,paint by use of sand paper, washed with alkaline soap solution in case of oil and grease,or with the help of paint removing chemicals as per manufacturers instructions.

Dismantling of bricks (laid flat or on edge) or brick tiles laid dry and pointed in any mortar in floors, channels, kerbs, aprons, over roof surfaces etc. in each layer complete all as specified and directed by Engineer-in-Charge.

S&F 40mm thick brick tiles jointed and pointed in CM (1:3) mixed with crude oil @ 5% by weight of cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in-Charge.

Fixing Only 40mm thick brick tiles jointed and pointed in CM (1:3) mixed with crude oil @ 5% by weight of cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer-in-Charge. Note:- Brick tiles obtained from dismantling shall be reused.

AGGARWAL CONSTRUCTION CO.

M/s Har Nandi Construction Company

YESH BUILDERS

shiv shanker enterprises