Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹27.5 L+₹8.5 L (44.8%)Rejected-AOC NO 237 7TH MAIN 3 D STAGE PILLANA GARDEN BANGALORE 560045 | BENGALURU URBAN | KARNATAKA | 560045 | L2 | Rejected-AOC NOT LOWEST |
Tender Value
₹19 L
EMD Value
₹38,000
Closing Date
17 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE ARMY BANGALORE
HQ CWE ARMY BANGALORE 101 Dickenson Road Bangalore 560042
PROVISION OF GUARD ROOM NEAR BLDG NO P-92 AT ASC CENTRE (SOUTH)-2 ATC UNDER GE (CENTRAL) BANGALORE
2022_MES_517681_1
86120/E8
Open Tender
Construction Works
Item Rate
180 days
BANGALORE
AS PER TENDER
7 documents required · 7 mandatory
₹500
Yes
GE (CENTRAL) BANGALORE
₹38,000
Yes
HQ CWE ARMY BANGALORE
20 Jun 2022
11 Apr 2022
23 May 2022
11 Apr 2022
17 May 2022
26 Apr 2022
11 Apr 2022 - 18 Apr 2022
19 Apr 2022
60 days
Amount
M&L for surface dressing n.exc 15 cm deep in soft/loose soil complete all as directed.
M&L for excavation in Soft/loose soil in trenches,n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc..or for shafts,wells,cesspits,manholes,pier holes etc n.exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as directed.
M&L for returning filling of soft/loose soil in including spreading, levelling,watering and well ramming in layers n.exc 25 cm complete all as directed.
M&L removing excavated soil exc 250 m and but n.exc 500 m and depositing where directed complete all as directed.
M&L for cement concrete type D2 1:4:8 (40 mm graded aggregate ) in foundations,filling and mass concrete complete all as directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 liters of emulsion per square metere of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as directed.
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as directed.
M&L for Treating the soil along with external perimeter of building at the rate of 2.25 Litre of emulsion per meter of the perimeter wall complete all as specified and as directed.
M&L for flat rough finished surfaces of concrete formwork to sides of concrete foundations,footings,bases of columns,raft and raft beams,sides and soffits (if any) of foundation and plinth beams,and similar work,vertical or to batter complete all as directed.
M&L for rough finished square/rectangular formwork to sides of pillars, posts, struts,piers,columns and stanchions complete all as directed.
M&L for rough finished formwork to sides and soffits of floor or roof beams,beam haunchings, griders, bressummers, lintels, cantilevers,shelves including supports, overhanges, etc...also splays between floors and beams complete all as directed.
M&L for rough finished flat formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as directed.
M&L for flat rough finished surfaces of concrete formwork to soffits of suspended slab such as roof slabs,floor slabs, landings and similar work not exceeding 200 mm thick complete all as directed.
M&L for rough finished formwork to edges of concrete flats,treads,breaks in floors,window cills n exc 20 cm wide complete all as directed.
M&L for rough finished formwork to fins,louvers,fascia complete all as specified and as directed.
M&L for M-25 (Design Mix) for foundations,including rafts, footings,foundation beams,plinth beams,bases for columns etc… basement slabs,under reamed piles and mass concrete complete all as directed.
M&L for M-25 (Design Mix) for columns,pillars,piers,posts and struts complete all as directed.
M&L for M-25 (Design Mix) for beams, Cantilevers, bressummers,lintels over 1.5 m span complete all as directed.
M&L for M-25 (Design Mix) for chajjas complete all as directed.
M&L for M-25 (Design Mix) for slabs supported on walls,beams and columns in floors,roofs,landings,balconies,canopies,deck slabs and in shelves and the like complete all as directed.
M&L for M-25 (Design Mix) for fins, fascias, louvres, parapets, and railings exc 60 cm in height,newels,balustrade,and the like complete all as directed.
M&L for TMT steel bars 10 mm dia and over,cut to length,bent to shape required,including cranking,bending spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as directed.
..Ditto..but 5 mm dia and over upto and including 10 mm dia in stirrups,spacers and binders complete all as directed.
M&L for precast cement concrete block (Type C1 1:3:6 20 mm graded aggregate) masonry with solid block,exc 10 cm in width and setting in cement mortar 1:6 complete all as directed.
M&L for precast cement concrete solid building blocks (Type C1 1:3:6 20 mm graded aggregate) or slabs 10 cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 complete all as directed.
M&L for moorum/red bajri filling in floors or pavings,laid in layers n exc 15 cm thick,spread,levelled and rammed including watering complete all as directed.
M&L for 75 mm thick cement concrete type D-2,1:4:8 (40 mm graded aggregate) is used for subase of the flooring complete all as directed.
M&L for 25 mm thick cement concrete type B-1,1:2:4 (20 mm graded aggregate) is used for levelling course complete all as directed.
M&L for coloured nonskid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 Sqm,in floors etc..set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed of CM 1:4,10 mm thick complete all as directed.
M&L for Glazed Ceramic Coloured joint free tiles 350x250x 7mm/450x350x7 mm thick as in Dado/Skirting/Steps etc set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4.Complete all as specified and directed.
M&L Rendering 15mm thick in two coat ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 finished even & smooth without using extra cement using WPC complete all as specified and as directed.
M&L Rendering 10mm thick in CM 1:6. finished even & smooth without using extra cement to walls all as specified and directed.
M&L Rendering 5mm thick in CM 1:3. finished even & smooth without using extra cement to ceiling all as specified and directed.
M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of cement base paint over one coat of primer all as specified and directed.
M&L for preparation of Newly Plastered surfaces of Wall and applying two coat of oil bound distember including one coat of primer and 1mm thick putty finish complete all as directed.
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distember including one coat of primer and 1mm thick putty finish complete all as directed.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285,fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM complete all as specified and as directed.
S&F for powder coated aluminium window and ventilator shutters,fixedtype/sliding type without sash bar,aluminium section weighing 0.55 Kg/m including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws etc.. complete all as directed.
S&F 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each pane complete all as directed.
S&F 4 mm thick figured glass,pin head type and glazing with oil putty in squares n .exc 0.50 sqm in each pane complete all as specified and as directed.
S&F Stainless steel wire cloth 0.24 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as directed.
S&F framed work such as grills,gratings,etc..with ends of bars shouldered and /or riveted,or forged into spikes,framed guard bars,barred iron doors,ladders,framed balusters,walk ways,railings,framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as directed.
M&L for preperation of new steel surfaces and applayingtwo coat of synthetic enamel paint over a coat of red oxide,zinc chrome all as specified directed.
S&F 25 mm dia brass moulded curtain bracktes complete all as directed.
S&F 25 mm dia stainless steel curtain rods complete all as directed.
M&L for broken stone hardcore of gauge n exc 63 mm, deposited,spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface complete all as directed.
M&L for PCC 1:3:6 type C2 using 40mm graded aggregate for 75mm thick Plinth Protection finished even and smooth without using extra cement complete all as directed.
M&L for 10 mm thick plastering on roof using CM 1:3 finished even & smooth without using extra cement using WPC complete all as directed.
M&L for Applying oil bound bitumen primer @ 1.50 Kg/Sqm and providing 3 mm thick APP modified water proofing membrane weighing 3.0 kg/sqm reinforced with non woven polyester matt weighing not less than 150 gm /sqm having softening point not less than 140 centigrate, having tensile strength of 650N/sqm and 350 N/sqm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180N by torch application with minimum 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumen 90/15 over the membrane @ 1.2 Kg /Sqm top of membrane surface shall then be finished with solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm complete all as specified and as directed. (WPC measured and paid seprately)
Supply only water proofing compound complete all as directed.
S&F 110 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as directed.
S&F 110 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as directed.
S&F 75 mm PVC (SWR) pipes single socketed,in any length with rubber ring joints,laid in trenches or in floors complete all as directed.
S&F 75 mm PVC (SWR) pipes single socketed,in any length with rubber ring jointsfixed to walls complete all as directed.
S&F PVC (SWR) bends 75 mm with access door complete all as directed.
S&F PVC (SWR) bends 110 mm with access door complete all as directed.
S&F PVC (SWR) junction single,(single T) 110 mm with access door complete all as directed.
S&F PVC (SWR) junction single,(single T) 75 mm with access door complete all as directed.
S&F PVC (SWR) 110 mm vent cowl complete all as directed.
S&F PVC (SWR) 75 mm vent cowl complete all as directed.
M&L for 75 mm PVC (SWR) floor trap,plain with grating including jointing with solvent cement complete all as directed.
M&L for 75 mm PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as directed.
S&F Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. including PVC Flushing cistern,PVC connection 450 mm and flush pipe, S or P Trap & Provision of concrete bedding and making good to floor all as directed by Engineer-in-charge.
S&F Vitreous China Wash hand basin , white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) including PVC connection 450 mm long complete all as directed by Engineer-in-charge.
S&F Vitreous china urinal, half stall urinal white with grating and union of discharge pipe (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe and 32mm dia PVC waste pipe including 450mm long PVC connection complete all as directed.
Supplying and laying of 25mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as directed.
Supplying and laying of 20mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as directed.
S&F for 25 mm dia PP-R gate valves (brass insert) as per requirement of site complete all as directed.
S&F for 20 mm dia PP-R gate valves (brass insert) as per requirement of site complete all as directed.
S&F rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including 20 mm dia float valve and HDPE 25 mm wter tank nipple complete all as directed.
S&F 15 mm stop valves,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.
S&F 15 mm Bib taps,cast copper alloy,screwed down,high pressure,with crutch or butterfly handle fancy type chromium plated screwed both ends for iron pipe or for unions and fixed complete all as directed.
S&F 15 mm bore stop valves,cast copper alloy,fancy type, chromium plated with long shank and cup washers complete all as directed.(concealed type)
S&F 15 mm Swivel shower with shower arm of PTMT any colour complete all as directed.
S&F towel rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190 gms) complete all as directed.
S&F 450 mm long 15 mm size with PTMT nuts complete all as specified and as directed.
S&F Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) complete all as directed.
S&F Towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) complete all as directed.
S&F 50mm x 47 mm size PVC solid door frame of size made out of 5mm plain Colour PVC sheet reinforced with MS square tube , supplying and fixing in opening as per specification and drawing shown in SSR 2004 Part II. complete all as directed.
S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain Colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain Colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain Colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site as per specification and drawing shown in SSR 2020 Part II. complete all as directed.
S&F 75 mm Butt hinges , medium weight, cold rolled, mild steel complete all as directed.
S&F anodised125 mm extruded aluminium alloy handles fabricated type complete all as directed.
S&F 125 mm aluminium anodised barrel tower bolts of extruded section complete all as directed.
M&L Second class Hard Wood Plain, Solid, Straight chowkats and frames, framed, rebated on the solid, put together with glue , pinned at joints complete all as specified and as directed.
S & F for bands,straps,Supports or stays for rainwater, clamps,hold fasts complete all as specified and as directed.
M&L for plain cement concrete type C1,1:3:6 (20 mm graded aggregate) in copings,kneelers,apex stones,bed plates,kerbs complete all as specified and as directed.
S&F Second class hardwood 35 mm thick glazed and skeleton shutters divided into squares open rebated and prepared to receive glass, gauze etc.edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a)
S&F 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle boardwith commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned andchemically pressure treated complete all as specified and as directed.
S&F 100 mm Butt hinges , medium weight, cold rolled, mild steel complete all as directed.
S&F 250 mm long aluminium alloy,anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.
S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as directed.
M&L Preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
M&L for surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.
M&L for Precast cement concrete kerb stones type B1,1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 complete all as directed.
M&L for hardcore of gauge n exc 63 mm deposited spread and levellled in layers n exc 15 cm thick,watered and rammed to a true surface complete all as specified and as directed.
M&L for Chequered cement concrete tiles 30cmx30cmx25 mm thick with grey cement and pigments,set,jointed and pointed in neat cement slurry in floors including screed bed of cement mortar 1:6 20 mm thick complete all as directed.
M&L for preparation of newly plastered surfaces over 10 cm girth or width of concrete and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
S&F Underground Double wall Corrugated (DWC) pipe,150 mm nominal size (ID 148.50 mm &OD 172.50 mm),SN-4 in any length,with rubber ring joints including all fittings,conforming to IS-16098 (Part-2),laid in trenches and testing on completion complete all as specified and as directed.
M&L for PCC 1:3:6 type B2 using 40mm graded stone aggregate in foundation concrete as in foundation filling complete all as directed.
M&L concrete ( 1 : 3 : 6) type C-2 to drain pipes including concrete bed to drain pipes and forming cradles complete all as specified and as directed.
M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:4) all as specified.
M&L Rendering 15mm thick in CM 1:4. finished even & smooth without using extra cement to walls all as specified and directed.
M&L cement concrete 1:2:4 type B1 (using 20mm graded coarse aggregate) as surface channels and drains complete all as directed.
M&L Pre cast RCC (1:2:4) type B1 for cover slab for man holes and set in cement mortar (1:6)
M&L for mildsteel deformed ,TMT bars 10 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.
M&L for mildsteel deformed ,TMT bars 6 to 8 mm cut to length bend to shape require including cranking hooping ends binding in & wine annealed not less than 0.9 mm dia or securing with clips all as specified and as directed.
M&L for cutting into existing manholes for connecting new drains,making good to pipe and rendering,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished,and reforming benching as required complete all as directed.
All as per item No 109 above but,for removing existing branch drain,making good to walling and rendering,cutting out branch channel and making good benchings complete all as directed.
M & L for Point wiring concealed type, with 1.5 Sqmm (nominal area), FRLS PVC insulated, multistranded, single core unsheathed, copper conductor cables passing through and including providing PVC conduit 'medium grade' with all fittings and accessories (like Tee, bend etc.) complete in walls /ceiling etc. with and including 1.5 Sqmm (nominal area) FRLS, PVC insulated, unsheathed, stranded, single core, copper cable green in colour as earth continuity wire connecting to common earth point and earth dolly including MS/pressed steel terminal box (wall thickness 1.2mm) suitable for modular switch, socket, fan regulators etc of suitable module including cutting chases in wall/ceiling and making good using PCC 1:2:4 type B1/ cement mortar 1:4, finished the surfaces smooth to match with the existing for one light/fan/bell/buzzer point controlled by one ,one way switches complete all as directed and specified for :- Note :- NOTE :- Cost element for modular metal flush box and white cover plate/ shall deemed to be included in quoted rate.frame and connecting to earth dolly all as specified for :-
(a) One light or fan point controlled by one 5 Amps switch one way complete all as directed.
(b) One 3 pin socket point 5 Amp on independent board complete all as directed.
(c) One 3 pin socket point 5 Amp on same board with other switches complete all as directed.
All same as per item No 111 here-in-before but with 4 sqmm size single core multistranded copper conductor cable for 6 pin 15 Amps switch socket combination outlet on independent board with 4 sqmm PVC insulated and unsheathed copper conductor as earth and connected to earth dolly.
M&L, Switch piano, flush button single pole, 5 Amps one way.
S&F Switch socket combination flush type 5 Amp 2 in 1
S&F Switch socket combination flush type 5/16 Amps5 in 1
S & F Fan regulator electronic, step & socket type 230 volt, suitable for 1200/1400mm sweep ceiling fan.
S & F Ceiling rose, 3 phase/PVC/polycarbonate, isolated body including supply and fix PVC square blocks.
S&F LED tube light fitting of 20 watts 6000K , 230 volt, with AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engr-in-charge. Make : Shakti/Crompton Greaves/Bajaj
S&F LED tube light fitting of 10 watts 6000K , 230 volt, with AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by Engr-in-charge. Make : Shakti/Crompton Greaves/Bajaj
S&F bldg LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. and including connection up with twine core twisted flexible copper conductor cable with 1.5 M long suitable size complete all as directed. Make Shakti/Bajaj/phillips/CG
S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.
S&F in replacement Sheet metal enclosure (ISI marked) distribution board for 240 volts, SPN 8 way horizontal type (Optipro), double door, single pole and neutral with 200 Amps rated neutral copper bus bar for housing MCB and fixed flush in wall surface, and tested on completion complete all as directed. Make Indoasian
S & F MCB single pole and neutral Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as directed. Make Indoasian
S & F MCB single pole 6 to 32 Amps 240 volts, 10 kA rupturing capacity providing in DB complete all as directed. Make Indoasian
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor complete all as directed.
S&F Exhaust fan AC single phase 230 volts, heavy duty of size 300mm sweep metallic body with louvre shutter,including connecting up 3 core flexible copper wire 24/0.20 sqmm from ceiling rose to fan terminal etc complete all as directed
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long including protection pipe 25mm bore medium grade and watering pipe by means of nuts, bolts, thimbles, check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion including earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways including funnel with watering pipe wire mesh and lugs, including testing and dismantling of old earthing complete all as directed.
Supply, fixing ,Testing and commissioning XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables ( heavy duty) with stranded aluminum conductor, 1100Volt grade on walls with fixing acessories of 10 Sqmm 4 Core complete all as directed.
Spreading river sand to required width at bottom and top for cable cushioning (not less 18 cm thick in layer after punning) all as specified in SSR Part-I complete all as directed.
Supply and lay common burnt old size bricks of sub class B laid at right angle on the cable complete in trenches for cable protection complete all as directed by Engr-in-charge.
Supply laying GI pipe 40 mm bore light grade for protection of U/G cable complete all as directed.
RK Builders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .