Widening of Intersection and Road Safety work at Km-102 Majitha of Barabanki-Haidergarh-Bachhrawa road(SH-13)

Providing and laying Speed table as per detail Drwaing with DBM and BC with hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be levelledand as per detial drawing . Uniform and free from streaks and holes.Speed Table

S/f of Pavement Maker (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3 plotting compound. The husing shall contain prismstic two glass covered prismatic reflective face to reflect incident light I/C all tax.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing.

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. SPEED LIMIT BOARD

Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign board as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing. Accidental Board

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be levelled. Uniform and free from streaks and holes. (Zebra Crossing)

Thermoplastic bar marking is a softer treatment to reduce the speed. One set of bar marking (refer TM 08) comprises of 6 bars of 300 mm wide. Each strip of thermoplastic strip shall be of 5 mm high and shall be set applied across the full width of the carriageway (Repeated Bar Making)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be levelled. Uniform and free from streaks and holes.

Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401

Interlocking Tiles - Rubber moulded reflective Zig-Zag 80mm. Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504.

Brick work with common burnt clay (non modular) bricks of class- 150 in superstructure above plinth level up to floor V level in all shapes and size in Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and fixing of Retro -Reflective Tree Plate of size 6"x6" made of 4 thick aluminium sheet. Face to be fully covered using high intensity Prismatic Grade (Type-IV) Reflective Sheeting of Avery Dennision, 3m of ther approved Brands as per MORT & H.Specification. Reflective sheeting shall by fully processed on base aluminum sheet.