Renovation works at Thiruchendur Kovilpatti Vilathikulam Srivaikundam Kurukkusalai and Sathankulam in Tuticorin Dist.

Amount

CIVIL WORK

Carryout the Renovation works in TNCSC Godown campus at Thiruchendur Taluk, Tuticorin District. Dismantling Plain Cement Concrete and clearing, away as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

Supplying and laying of Interlocking Paver Block Stone 83mm thick. Over a base layer of crushed stone sand filling including Cost of materials laying and Labour charges etc.,

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centres with casurina props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusives of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Column footing, Plinth beam, top tie beam.

Reinforcement Cement Concrete 1:1 1/2:3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air inlet window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying, fabricating and fixing in position of mild steel door with double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, with bottom 1/3rd M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffeners and top 2/3rd grilled including one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete.

Supply, laying jointing PVC pipes of 25mm - 10kgf of approved quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position 15mm dia brass Cp screw down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (taps should be got approved by the Executive Engineer before use on the works)

Carryout the Renovation works in TNCSC Godown campus at Kovilpatti-1 in Kovilpatti Taluk, Tuticorin District. Dismantling Plain Cement Concrete and clearing away as directed by the departmental officers..

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Paving the floor with fine polished cuddapah stone slab of 38 / 40mm thick laid over Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five Sand and Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification.

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air inlet window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Brick work in CM 1:5 (one cement and five sand) using best quality II Class chamber bricks of size 9" x 4⅜" x 2¾ for foundation and basement including curing etc., complete complying with standard specification

Reinforcement Cement Concrete 1: ½ :3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Column and sunshade.

Carryout the Renovation works in TNCSC Godown campus at Kovilpatti-2 in Kovilpatti Taluk, Tuticorin District. Dismantling Plain Cement Concrete and clearing away as directed by the departmental officer.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Paving the floor with fine polished cuddapah stone slab of 38 / 40mm thick laid over Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five Sand and Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification.

Supplying and FILLING GRAVEL Supplying and filling in 'foundation and basement with filling crushed stone sand in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification .

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Road toe wall.

Reinforcement Cement Concrete 1:1 1/2:3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing FRP sheet roofing of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of AC Ridges which is placed on the top of purlin in the longitudinal direction with necessary G.I screw, Rubber, Aluminum washer, etc. Complete

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air inlet window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Brick work in CM 1:5 (one cement and five sand) using best quality II Class chamber bricks of size 9" x 4⅜" x 2¾ for foundation and basement including curing etc., complete complying with standard specification

Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime ( no sand to be used ) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design , slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime Jiggery water etc,.complete as per standard specification and as directed by the Engineer in charge.

Finishing the top of Roof with one course of machine pressed tiles of size (23x23x2 cm)approved quality in C.M 1:3 -12mm thick mixed with water proofing compound confirming to IS @2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortor mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification

Supplying, fabricating and fixing in position of mild steel door with double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, with bottom 1/3rd M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffeners and top 2/3rd grilled including one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive

Carryout the Renovation works in TNCSC Godown campus at Kovilpatti-3 in Kovilpatti Taluk in Tuticorin District. Dismantling Plain Cement Concrete and clearing away and as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

CEMENT CONCRETE 1:5:10 (one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for paneling wherever necessary and as directed by the departmental officers)

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing FRP sheet roofing of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air inlet window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Carryout the Renovation works in TNCSC Godown campus at Vilathikulam in Tuticorin District. Dismantling Brick work in Cement Mortar wall under 3M height for any thickness of wall and clearing away as directed by the departmental officers.

Dismantling Reinforcement Cement Concrete and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Supplying and laying of Interlocking Paver Block Stone 83mm thick. Over a base layer of crushed stone sand filling including Cost of materials laying and Labour charges etc.,

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Toe wall, Slab and beam,

Reinforcement Cement Concrete 1:1 1/2:3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Supplying and laying of High profield colour galvalume sheet with combination 55AI:43.4Zn:1; 6SI of TCT bent type 0.50mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile /CR sheets of approved quality for roofing with necessary fixing arrangements like 65mm abd long hexagonal head screws with EPDM rubber seal, etc., complete complying with standard specification and as directed by the departmental officer, during execution of work. (Test certificate for quality should be furnished on receipt of material at site )

Supplying and Roofing of High Profile Galvalume sheet ridge pieces of approved quality in size 1.00 m x 0.70 m of 0.50mm tk with necessary U or J bolts and nuts GI washers etc.,complete complying with standard specification.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing Poly Carbonate Sheet of size 3 mx1.06m of 3mm tk on the roof in-between the colour coated Galvalume sheets for proper lighting with necessary screws and EPDM rubber washers, Complying with standard specification and as directed and specified by the departmental officers including cost of loading ,unloading and transportation charges etc complete .,

supplying and fixing of Rotary ventilators over the roof with necessary bolt and nut arrangement to with stand wing velocity as specified by the departmental officers - size

Finishing the top of Roof with one course of machine pressed tiles of size (23x23x2 cm)approved quality in C.M 1:3 -12mm thick mixed with water proofing compound confirming to IS @2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortor mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification

Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime (no sand to be used) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design , slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime Jiggery water etc,. complete as per standard specification and as directed by the Engineer in charge.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Paving the floor with best quality Virtified Tiles of size 600x600x8mm of approved colour, shade and quality laid in Cement mortar 1:3 (One cement and Three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air inlet window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying, fabricating and fixing in position of mild steel door with double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, with bottom 1/3rd M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffeners and top 2/3rd grilled including one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete.

Supply, laying jointing PVC pipes of 25mm dia (10kgf) of approved quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position 15mm dia brass Cp screw down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (taps should be got approved by the Executive Engineer before use on the works)

Brick work in CM 1:5 (one cement and five sand) using best quality II Class chamber bricks of size 9" x 4⅜" x 2¾ including cost of scaffolding, curing etc., complete complying with standard specification

Carryout the Renovation works in TNCSC Godown campus at Srivaikundam Taluk in Tuticorin District Dismantling Plain Cement Concrete and clearing away as directed by the departmental officers.

Chipping of concrete & roughening the surface as directed by the departmental officers.

Dismantling Reinforcement Cement Concrete and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers

Dismantling AC Sheet Roofing without roof timbers and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers

Dismantling Brick work in Cement Mortar wall under 3M height for any thickness of wall and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Reinforcement Cement Concrete 1:1 1/2: 3 ( one cement, and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild-steel sheets of size 90cmx60cm 10 gauge stiffened with welded mild steel angles of size 25mmx25mmx3mm laid with country wood joist of average of size 10cmx6.50cm at about 90cm centers with casuarinas props of 13cm dia at 75cm centre to centre with all nails coir, wedges complete and removing the form work after necessary curing period as directed by the corporations officers. The rates should inclusive of cutting , bending, welding , charges of M.S sheets, M.S. angles etc., Complete Column Footing,Plinth Beam & Top tie Beam

Slab, beam, lintel etc.,

Supplying and laying of High profield colour galvalume sheet with combination 55AI:43.4Zn:1; 6SI of TCT bent type 0.50mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile /CR sheets of approved quality for roofing with necessary fixing arrangements like 65mm abd long hexagonal head screws with EPDM rubber seal, etc., complete complying with standard specification and as directed by the departmental officer, during execution of work. (Test certificate for quality should be furnished on receipt of material at site )

Supplying and Roofing of High Profile Galvalume sheet ridge pieces of approved quality in size 1.00 m x 0.70 m of 0.50mm tk with necessary U or J bolts and nuts GI washers etc., complete complying with standard specification.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing corrugated Poly Carbonate Sheet of size 3 mx1.06m of 3mm tk on the roof in-between the colour coated Galvalume sheets for proper lighting with necessary screws and EPDM rubber washers, Complying with standard specification and as directed and specified by the departmental officers including cost of loading ,unloading and transportation charges etc complete .,

supplying and fixing of Rotary ventilators over the roof with necessary bolt and nut arrangement to with stand wing velocity as specified by the departmental officers - size

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Finishing the top of Roof with one course of machine pressed tiles of size (23x23x2 cm)approved quality in C.M 1:3 -12mm thick mixed with water proofing compound confirming to IS @2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortor mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification

Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime (no sand to be used) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design , slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime Jiggery water etc,. complete as per standard specification and as directed by the Engineer in charge.

Paving the floor with best quality Virtified Tiles of size 600x600x8mm of approved colour, shade and quality laid in Cement mortar 1:3 (One cement and Three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air inlet window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying, fabricating and fixing in position of mild steel door with double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, with bottom 1/3rd M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffeners and top 2/3rd grilled including one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete.

Supply, laying jointing PVC pipes 25mm dia ( 10kgf) of approved quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position 15mm dia brass Cp screw down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (taps should be got approved by the Executive Engineer before use on the works)

Brick work in CM 1:5 (one cement and five sand) using best quality II Class chamber bricks of size 9” x 4⅜” x 2¾ including cost of scaffolding, curing etc., complete complying with standard specification

Supplying, fabricating and fixing in position MS channel 100 x 50 x 6mm at the edge of loading platform with M.S. bolt of 16mm dia of 45cm long including two coats of anticorrosive metalic nutbrown colour paint over one coat of primer etc. complete as directed by the departmental officers.

Clearing the Clearing heavy jungle

Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., including all incidental charges etc., complete as per standard specification .

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

CEMENT CONCRETE 1:5:10(one cement , five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Reinforcement Cement Concrete 1:2:4 ( one cement, two sand, four aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Providing and fixing pre cast R.C.C fencing post of size 3.05m and 2.40m long 15 cm X 15 cm top and bottom with R.C.C 1:2:4 using 20mm gauge hard granite broken stone jelly including cost of moulding and the cost of fabrication of reinforcement and placing the grills in position including curing and finishing veyance to the spot and aligning etc., complete. Vertical Post - 0.15 x 0.15 x 3.05m

Strut Post - 0.15 x 0.15 x 2.40m

Supplying and fixing chain link fencing of size 2" x 2" tying with 10 Gauge galvanized binding wire to the existing RCC vertical post of 150 x 150 mm with binding wire as directed by departmental officers.

Supplying and fixing of MS Flat of size 40x6 mm for anchorage to chain link fencing including cost of cutting, welding , labour charges ,bolts and nuts etc .complete.

Carryout the Renovation works in TNCSC Godown campus at Kurukkusalai Taluk in Tuticorin District Dismantling Cuddapah slab and clearing away and carefully stacking materials useful for re-use as directed by the departmental officers

Dismantling Brick work in Cement Mortar wall under 3M heigh for any thickness of wall and clearing away clearing, away and carefully stacking materials useful for re-use as directed by the departmental officers

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation with Gravel in layers of not exceeding 150mm thick well watered, rammed and consolidated including watering etc., complete complying with standard specification and as directed.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Paving the floor with fine polished cuddapah stone slab of 38 / 40mm thick laid over Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five Sand and Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification.

Supplying and laying of High profield colour galvalume sheet with combination 55AI:43.4Zn:1; 6SI of TCT bent type 0.50mm thick and standard width of 1.06m with yield strength of 550 MPA made from high tensile /CR sheets of approved quality for roofing with necessary fixing arrangements like 65mm abd long hexagonal head screws with EPDM rubber seal, etc., complete complying with standard specification and as directed by the departmental officer, during execution of work. (Test certificate for quality should be furnished on receipt of material at site

Supplying and Roofing of High Profile Galvalume sheet ridge pieces of approved quality in size 1.00 m x 0.70 m of 0.50mm tk with necessary U or J bolts and nuts GI washers etc., complete complying with standard specification.

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete.,

Supplying and fixing corrugated Poly Carbonate Sheet of size 3 mx1.06m of 3mm tk on the roof in-between the colour coated Galvalume sheets for proper lighting with necessary screws and EPDM rubber washers, Complying with standard specification and as directed and specified by the departmental officers including cost of loading ,unloading and transportation charges etc complete .,

supplying and fixing of Rotary ventilators over the roof with necessary bolt and nut arrangement to with stand wing velocity as specified by the departmental officers - size

PLASTERING with cement mortor 1:5 (one cement and five sand) 20 mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air inlet window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Supply, laying jointing PVC pipes of approve quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position 15mm dia brass Cp screw down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (taps should be got approved by the Executive Engineer before use on the works)

Brick work in CM 1:5 (one cement and five sand) using best quality II Class chamber bricks of size 9” x 4⅜” x 2¾ including cost of scaffollding curing etc., complete complying with standard specification In ground floor upto 4.50M height above basement.

Carryout the Renovation works in TNCSC Godown campus at Sathankulam Taluk in Tuticorin District Dismantling Plain Cement Concrete clearing, away and carefully stacking materials useful for re-use for thickness of walls.

EARTH WORK excavation for foundation in all classes of soils and subsoils to full depth, as may be directed except in hard rock, requiring blasting including initial leads and lifts and refilling the sides of foundation with excavated earth in 150mm layers well watered rammed and consolidated including depositing surplus earth with in the Godown or inside compound in places shown with initial leads and lifts, clearing, leveling site, shoring, strutting, baling of water wherever necessary etc., complete complying with standard specification and as directed.

Supplying and filling in foundation and basement with clean M.SAND in layers of 150mm thick, well watered, rammed and consolidated including watering etc., complete complying with standard specifications and as directed.

CEMENT CONCRETE 1:5:10(one cement, five sand and ten aggregate)using 40mm gauge hard broken granite stone jelly for foundation including de-watering, side shuttering , strutting, wherever necessary including curing etc., complete complying with standard specifications and as directed.

Paving the floor with fine polished cuddapah stone slab of 38 / 40mm thick laid over Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick over the existing bed of Cement Concrete 1:5:10, (One Cement, Five Sand and Ten aggregate) and pointing the joints to full depth of slabs with same mortar mixed with black oxide and the top surface rendered smooth, curing, etc., The cuddapah stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete complying with standard specification

Reinforcement Cement Concrete 1:1 1/2 :3 ( one cement, one and half sand, three aggregate) using 20mm of hard broken granite stone for all RCC works using machine for mixing concrete excluding cost of centering, Strutting, shuttering, and fabrication of reinforcement and placing the grills in position etc., but including finishing and curing etc., complete complying with standard specifications and as directed.

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C. works including cost of steel, labour for straightening, bending, cranking, tying grills with 18 gauge galvanized binding wire and placing grills in position complete complying with standard specification and as directed.

Supplying and fixing AC sheet roofing with 6mm thick asbestos cement sheet of fully corugated (grey colour) of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing FRP sheet roofing of approved quality by drilling holes (and not by punching) with necessary J / U’ bolts and nuts of 8mm dia of suitable length and providing one set of bitumen washers of 25mm dia and 1.60mm thick for each bolt including protruding portion of bolts in roof shall be covered with bitumen compound etc. complete complying with standard specification and as directed by the departmental officers.

Supply and fixing of AC Ridges which is placed on the top of purlin in the longitudinal direction of necessary G.I screw, Rubber, Aluminum washer, etc. Complete

Supply and fixing of 40x6mm G.I flat over the Galvalume sheet roofing which is placed on the top of purlin in the longitudinal direction to avoid the lifting of roofing due to wind, the rate inclusive of necessary G.I screw, Rubber, Aluminum washer with necessary adhesive flashing tap fixed directly over the galvalume sheet, labour charges for fixing, conveyance loading, unloading and cutting, etc. complete

Brick work in CM 1:5 (one cement and five sand) using best quality II Class chamber bricks of size 9" x 4⅜" x 2¾ including cost of scaffolding curing etc., complete complying with standard specification

PLASTERING with cement mortor 1:5 (one cement and five sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

PLASTERING with cement mortor 1:3 (one cement and Three sand) 20mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting the walls with two coats of plastic emulsion paint of first class approved quality and colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed.

White washing two coat with best shell lime including cost of shell lime, gum, kanjee and brushes etc., complete complying with standard specification and as directed.

Painting old iron work with two coats of synthetic enamel paint and approved quality and colour. The rate is inclusive of cost of all materials, labour brushes and scaffolding charges etc. complete complying with standard specifications. (The paint should be got approved by Engineer in charge work before use on works)

Servicing the existing rolling shutter of size 1.80 x 2.60m including all labour charges for servicing greasing changing damaged leaf portion, tempering the spring and changing the damaged barring and changing the damaged shaft etc. complete and as directed by the departmental officers.

Renewing the broken Air Inlet Window and Ventilator glass panes of 4mm thick with new glass panes of 4mm thick of approved quality including fixing in position with TW beading all round the glass panes with nails etc., complete complying with standard specification and as directed by the departmental officers.

Supplying and fixing in position Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthen ware of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying, fabricating and fixing in position of mild steel door with double shutters using M.S angle of size 40 x 40 x 6mm for outer frames and 35 x 35 x 5mm for shutter frames, with bottom 1/3rd M.S sheet of 18 gauge with M.S flat of size 32 x 6 mm for internal stiffeners and top 2/3rd grilled including one number of aldrop , two numbers of tower bolts, holdfasts, hinges, handles etc., including providing one coat of red oxide primer. The rates shall inclusive of cost of all materials labour charges for fixing the door in position by dismantling the masonry, concrete etc. and redoing the same to the original condition duly packed with concrete etc., complete.

Supply, laying jointing PVC pipes of approve quality and best variety confirming to ISS and with ISI mark of the following sizes .including cutting threading and fixing PVC /GI specials but excluding the cost of such specials and fixing to wall with necessary teak wood plugs , clamps screws and making holes on the walls, floors and making good the dismantled portion to the original condition with necessary scaffolding charges etc., complete complying with standard specification

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

Supplying and fixing in position 15mm dia brass Cp screw down tap / pillar tap (heavy duty) of approved make conforming to BIS specification s and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (taps should be got approved by the Executive Engineer before use on the works)

Supplying, fabricating and fixing in position MS channel 100 x 50 x 6mm at the edge of loading platform with M.S. bolt of 16mm dia of 45cm long including cost of two coats of anticorrosive nutbrown paint over one coat of primer etc. complete.

PRIYA ENGINEERING PROJECTS PRIVATE LIMITED

Sri Aishwarya Construction