Procurement and Installation of Agitator sets along with allied works at CRMB plant at Haldia Refinery Terminal under West Bengal State Office

Design, Drawing, Manufacturing, Supplying, Transporting, Installing, Testing and Commissioning of agitator set including agitator, gear and motor sets at CRMB plant at Haldia near IOCL Haldia Refinery Terminal

Design, Drawing, Manufacturing, Supplying and Transporting of agitator set including agitator, gear and motor sets at CRMB plant at Haldia near IOCL Haldia Refinery Terminal

Designing, supplying, fabricating, welding, bolting, riveting, assembling and erecting in position 8.0 M high Fire Screen Wall around the tank with GI sheets with cross supports, etc (temporary required local) as per alignment shown by site Engineer, maintaining same till the completion of entire work and dismantling the entire screen wall, carting away the dismantled materials from site, redoing the entire existing surface to the original condition, etc complete.The 8M high Fire Screen Wall including the foundation is to be designed and approved by a ''Licensed Structural Engineer'' and should be suitable for local soil bearing capacity, wind speed, etc.

Fire screen : Providing and laying in position approved quality profiled, pre-coated coloured galvanized steel sheets of minimum 0.45mm thickness (TCT) in barricading, including cost of all materials, delivery to site, cutting, metering, lapping, providing cut-outs for fixing accessories and necessary approved quality corrosion proof fasteners with neoprene capping and washers ridges, valleys, gutters, gutters of required shape, apron pieces, flashing etc. all complete and with all accessories required for the cladding works including necessary structural scaffolding for erection jobs as specified and directed. NOTE: (1) Contractor shall take back the cladding sheets (used in barricading structure) after completion of the job and on the instructions of Engineer-in-Charge. (Cost of dismantling and Carriage till contractor's store (outside the IOCL premises) is included in this item and no extra payment shall be paid to the contractor on this account). (2) Payment against the job on SQM basis shall be made to the Contractor while erection of the cladding sheets(3) The cladding sheets shall be dismantled and taken outside the premises by the Contractor within 30 days of instructions from E-i-C. (4) In case the Contractor fails to dismantle and shift the cladding material outside the IOCL premises within 30 days of clear instructions from E-i-C, the Owner shall be free to get the same dismantled and shift to Owner's scrap yard using Owner's resources and in such case the dismantled items shall not be returned to the Contractor and the ownership of the same shall be fully vested with the Owner

Supplying, providing of safe tubular double stage (box type) Scaffolding outside the tank as per specification & satisfaction of location in charge. After use, the same shall be dismantled and taken away by the contractor. Payments shall be made for actual area of scaffolding provided based on requirement. Area of scaffolding will be measured on the basis of actual height of scaffolding provided multiplied by actual average length of scaffolding provided.

Excavating Trenches of required width for pipes, cables, etc including excavation for sockets & dressing of sides, ramming of bottoms, depth upto 1.5m including getting out excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc. and disposing surplus excavated soil as directed, within or outside site at unobjectionable place IN ALL KIND OF SOILS - Pipes, Cable etc. > 80mm < 300m dia

Providing earthing with 100 mm dia, 3.8M long C.I/GI pipe as per IS:3043 (with latest ammendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drawing all complete as per specification & direction of Engineer In-charge

Boxing up the manhole cover of the tank including supplying and fixing 3mm thick non metallic type CAF- 9 gaskets of approved make as per IS 2712- 1979 with steel fasteners as per IS 1367- 1967 and washers of approved quality.

Supplying, transporting, fabricating, erecting Structural Steel work from rolled sections and built-up sections like flats, tees, angles, channels, plates, pipes, etc for various structural elements as required . Preparation of drawing, design & specification shall be arranged by contractor at his own cost as per guidance of IOCL. Item also includes painting of structural surface as per the standard painting scheme:

SUPPLY OF GI PIPE: IS-1239 Gr. C Heavy Duty ; 150 mm dia