Electrification Work, Toilet Upgradation, Flooring Work, Making of T.V. Unit/Wardrobe/Dressing Tensile Fabric Shed in Main Building at Residential Quarter No.-2 (Occupied by Honble Chief Minister Jharkhand) at Booty Road, Dindayal Nagar, Ranchi

Amount

Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm cement plaster (1:4) in celling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. Lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Size of Tile 1200 x 1200 mm

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall

25 mm nominal outer dia .Pipes.

32 mm nominal outer dia. Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.

15 mm nominal outer dia .Pipes.

20 mm nominal outer dia .Pipes.

Providing and fixing on wall face unplasticised Rigid PVC rain waterpipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

75mm dia

110mm dia

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Single tee with door - 75x75x75 mm

Single tee with door - 110x110x110 mm

Single tee without door - 75x75x75mm

Single tee without door - 110x110x110 mm

Bend 87.5° - 75 mm bend

Bend 87.5° - 110 mm bend

Supplying materials and labours for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600x450mm inter- nal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. Cover with frame (weight not less than 36kg.) alongwith earth work in excavation and 80 mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per spe- cification and direction of E/I. Supplying labours, tools and tackles for cleaning filled and choaked man hole, septic tank, inspection-chamber, gullay pits, sewerage tank etc. in all lift and disposal of spoils upto a lead of 50M all complete as per specification and direction of E/I.

Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.

Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)

Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)

Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size)

providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL)

(a) 10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)}

12mm to 16mm @ 65% (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)})

Centering and shuttering including strutting, propping etc. and removal of form for

Foundations, footings, bases of columns, etc. for mass concrete for foundation

Columns, Pillars, Piers, Abutments, Posts and Struts

Point wiring in PVC conduit, with modular type switch :- Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core in surface/recessed PVC conduit, with modular switch, modular plate suitable GI box etc as required.

Group C

Twin Control point wiring in PVC conduit, with modular type switch :- Wiring for twin control point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, 2 way with modular switch, modular plate suitable GI box etc as required

Power plug wiring in PVC conduit (2 x 4 sq.mm) - Wiring for light/power plug with 2 x 4 sq.mm. FR PVC insulated copper conductor single core cable for loop earthing as required.

Circuit/submain wiring in PVC conduit - Wiring for Circuit/submain wiring along with earth wire the following sizes PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required.

2x1.5 Sqmm + 1x1.5 sqmm earth wire (For 5/6A Plug Points)

2x2.5 Sqmm + 1x2.5 sq mm earth wire

2 x 4.0 sq.mm. + 1 x 4.0 sq.mm. earth wire

4 x 4.0 sq.mm. + 2 x 4.0 sq.mm. earth wire

2 x 6.0 sq.mm + 1 x 6.0 sq.mm earth wire

S/F Modular type switch/ socket :- Supplying and fixing of following modular switch / soket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 amps, one way switch

5/6 amps, 3 pin socket outlet

15/16 amps, one way switch

15/16 amps, 6 pin socket outlet

Telephone socket outlet

TV antenna socket outlet

S/F Modular type electronic fan regulator :- Supplying and fixing stepped type electronic fan regulator on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

S/F Modular boxes, base & cover plate - Supplying and fixing following size/modulaes G.I. box along with modular base & cover plate for modular switches in recess etc. as required.

1 or 2 (78mm x 78mm x 45mm)

4/5 module (78mm x 140mm x 50mm)

6 module (78mm x 205mm x 50mm)

8/9 module (78mm x 230mm x 60mm)

12 module (135mm x 205mm x 60mm)

S/F light plug point with modular type accessories :- Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings)

S/F power plug point with modular type accessories :- Supplying and fixing suitable GI box with modular plac and cover in front on surface of in recess, including providing and fixing 6 pin 15/16 amps modular socket outlet and 5/6 amps modular switch. connection, painting etc. as required (For light plugs to be used in non residential buildings)

ITC exhaust fan upto 450mm sweeo - Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing commissioning etc. as required.

S/F T.P. MCB DB :- Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door, Horizontal type

6 way (4 + 18), Double door, Horizontal type

S/F 'C' series, MCB :- Supplying and fixing 6 amps to 32 amps rating, 240 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, esting and commissioning etc. as required.

6/32 amps, Single pole

40 amps, TPN

50/63 amps, TPN

S/F TPN RCCB :- Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

S/F 20 amps SPN MCB industrial socket outlet :- Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Earthing with copper earth plate 600mm x 600mm x 3mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as required.

Supply and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including solding etc. as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

P/F G.I. lightning condutor finial :- Providing and fixing of lighting conductor finial , made of 25mm dia 300mm long , G.I. tube, having single prong at top, with 85mm dia 6mm thick G.I. base plate including holes etc. complete as required.

Reverting, sweating and soldering lightning conductor tape :- Reverting , sweating and soldering of copper / G.I. tape (with another copper / G.I. tape , base of the finial or any other metallic object ) as required.

P/F G.I. lightning conductor tape in horizontal run :- Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for Horizontal run ).

P/F G.I. lightning conductor tape in vertical run :- Providing and fixing G.I. tape 20mm x 3mm thick on parapet or surface of wall for lightning conductor complete as required.( for Vertical run ).

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size exceeding 95 sq mm but not exceeding 185 sq mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

Laying of one number PILCA/ PVC insulated and PVC sheathed/ XLPE power cable of grade exceeding 1.1KV but not exceeding 11 KV of size exceeding 120 sq mm but not exceeding 400 sq mm in the existing RCC/HUME/STONEWARE/ METAL pipe as required.

S.I.T.C of floowing rating reccess/surface mounted LED round/square shape Down light luminarie with pressure die cast housing for single phase supply voltage. Luminarie shall be confirm to IS:10322 part-5/section-2 or IEC:62722 with all neccssary accessories as required

15W COB based round LED light with multiple bem angles (36 Degree)

30W COB based round LED light with multiple bem angles (36 Degree)

Providing and fixing of XLPE, Aluminium Armoured PVC Cable confirming to IS IS7908 (Part-1) 1988 0f grade 1.1KV. Make:- Havells / Finolex / Polycab

150 Sq.mm, 3.5 core

1.1 KV Cable End Termination:- Supplying and making indoor cable end termination with brass double compression gland and aluminium lugs for following size of PVC insulated XLPE Al. Ar. Cable of 1.1 KV grade as required.

3½ X 150 sq. mm (50mm)

Providing , laying and fixing following dia GI pipe (medium Class) in ground complete with G.I.Fittings including trenching (75 cm deep) and refilling etc. as required.

50 mm dia

12" (300mm) metal exhaust fan

2.0Tr. 5 Star Split A.C (Inverter Type) IS-1391-part-I

1.5Tr. 5 Star split A.C (Inverter Type) I91391-part-I

Copper Tube of size 1/4" for aplit ac unit 1/1.5/2/3 Tr capacity including nitride rubber

Copper Tube of size 5/8" for aplit ac unit 1/1.5/2/3 Tr capacity including nitride rubber

5 KVA wall mounted automatic voltage stablizer from range 140V to 280V

Drain Pipe For AC

Outdoor stand for 2.0 Tr Split AC

Carriage of Materials

Sand - 20 km

stone Chips - 22km

Bricks - 8km (1k + 7p)

Installation of Wall Hung WC With UF Soft Close Seat Cover, Hinges, Accessories Set, Size: 360x585x415 mm OPS-WHT-15951UF

VGS-WHT-81853S300UF Description Rimless Single Piece WC With UF Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 395x710x730 mm, S Trap- 300 mm

Installation of cistern Single Piece Concealed Cistern Body (Front or Top Actuation) with Floor Mounting Frame, Installation Kit and “P-Type” Drain Pipe Connection Set for Wall Hung WC (without Flush Control Plate) JCS-WHT-2431FP

Jaguar 2 way bib cock antique chrome 35041 m

installation of Jaguar Anti Chrome Health Faucet ACR-573

installation of Jaguar Anti Chrome liquid soap dispenser ACR-1131N

Jaguar vitreous China sinks /wash basin KUS-WHT-35901 Description : Table Top Basin, Size: 595x435x185 mm

Waste coupling ALD-GDS-705L130 Description Waste Coupling 32mm Size Full Thread with 130mm height

Tall boy ALI-ABR-85005B Description Single Lever Tall Boy with 125mm Extension Body Fixed Spout without Popup Waste System with 600mm Long Braided Hoses

Jaguar Angle cock antique chrome 35053 pm

Connection Pipe With Nuts reputed brand

Jaguar Towel rack antique chrome 24" 1181s

Jaguar Towel rod 24" antique chrome 1111SM

Jaguar Towel Ring antique chrome 1121N

Jaguar Soap Dish antique chrome 1131N

PVC Corner Glass Shelf

Jaguar Tumbler Holder antique chrome 1141N

Jaguar paper Holder antique chrome 1141N

jaguar control plate antique chrome 852415

CONCEALED BODY FOR SINGLE LEVER BASIN MIXER WALL MOUNTED Code ALD-CHR-233N Description Concealed Body for Single Lever Basin Mixer Wall Mounted, But without Exposed Parts

SWIVEL MIRROR 630 X 445MM AKP-CHR-35795 Description Swivel Mirror 630 X 445mm Rectangular Shape

Installation of pressure pump of Grundfos brand or equivalent 40 litre capacity with all accessories do all complete job

Panel shower jaguar CURVE NEO Shower Panels Code SHP-WHT-TMCURVENEO Description Size: 150 x 23 cm

Installation of Geyser Jaguar 25 Litre ERM-WHT-V025

Brezel-Less Round | High intensity LED Mirror |600 mm

Lavish Vanity Cabinet 600 m wall hanging single made by Waterproofing material with minimum 5 year warenty do all complete job

Unbranded Floor Drain Traps having Linear Shape (Long drain ) for floor drainage and made up of SS 304

Providing and fixing of 8 mm wooden laminate floor and skarting with 2 mm thick Kini Foam under layer (Make :- Action, Green, Deco foot or Equivalent.) including Labour charge. All complete as per building specification and direction E/I

LED TV Back Drop Units of Standard Size (varying depth 450 mm to 400 mm) as per the following specification: Supporting system comprising of factory-made 2"x1" rectangular aluminium Chanel of placed vertically & horizontally at 600mm centres. Providing & fixing 19 mm thick BWR Plywood finished to the frames on one side with sheet metal screws. Cladding with wpc louver/leatherette/Texture laminate .Providing & fixing cladding to the walls as per the design enclosed with Tick Beat of approved texture, grains, shade fixed to 12 mm 710 marine grade [Shelves and Drawer units: Providing 75 mm to thick shelves on the Top level and Bottom level of varying depth 450 mm to 400mm. Bottom level to be provided with open draw units of size.(600mm to 800mm) x (450mm to 400 mm depth) x 300mm of Minimum 3 No's of Drawer units 19 mm plywood with 1.5 mm Laminate Providing Hardware i.e., Multipurpose locks, Handles, telescopic channels, Auto Hinges & Heavy-duty magnet catcher’s, Tower Bolts etc. with New Hardware as approved by the engineer in charge. Provision of HDMI cable and necessary strip light as per direction of engineer in charge (Make of Laminate and Plywood(710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing full height Dressing Unit with storage units, Natural polish Mirror & rack & Drawer below of 450 mm deep made in 19mm thick plywood and finished in 1.5 mm laminate. The mirror area around average 1200 mm x 450 mm (it may be variable as per direction of EI) The internal shelves & shutters, drawers shall be made in 12 mm thick plywood finished in laminate of approved shade with matching PVC edge lipping as per the detailed drawing. All the exposed external and internal plywood surfaces shall also be finished with laminate of approved shade with 2mm thick rigid imported PVC edge lipping as per the detailed drawings. This also includes necessary 1st class quality hardware like sliding channels, handles, hinges, tower bolts/ball catches, locks etc. as per the manufacturer’s specification adhering to the design intent drawings. This also includes 75mm high laminate finished skirting as per the detailed drawing. (Make of Laminate and Plywood(710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing full height storage units with luggage rack below of 450 mm deep made in 19mm thick plywood and finished in 1.5 mm laminate. The internal shelves & shutters, drawers shall be made in 12 mm thick plywood finished in laminate of approved shade with matching PVC edge lipping as per the detailed drawing. All the exposed external and internal plywood surfaces shall also be finished with laminate of approved shade with 2mm thick rigid imported PVC edge lipping as per the detailed drawings. This also includes necessary hardware like sliding channels, handles, hinges, tower bolts/ball catches, locks etc. as per the manufacturer’s specification adhering to the design intent drawings. This also includes 75mm high laminate finished skirting as per the detailed drawing. (Make of Laminate and Plywood(710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Providing and fixing 600mm wide quartz top running counter with 600mm deep X 750mm deep below storage made in 19mm thick plywood frame work as per the detailed drawings The counter top shall have 20mm thick Quartz Stone and of approved shade. The counter shall have below storage unit with intermediate adjustable shelves and shutters made in 19mm thick plywood necessary ply backing, finished of approved shade. The counter to have granite splash band over fixed with cement mortar and the Cement paste with edge detail as per the detailed drawing. The storage unit shall have in combination of open shelves & closed storage unit with intermediate shelves & shutters made in 19mm thick plywood necessary ply backing, finished in 1.5 mm laminate of approved shade. (Make of Laminate and Plywood(710 Marine Grade) Green/Century/Archid or equivalent as per direction of engineer in Charge)

Structural steel Work: Providing, fabricating, Assembling, painting, hoisting, erecting and placing in position MS Built-up section/ Tubular structure (MS built-up section:- Rolled section & plates confirming to IS 2062 minimum required grade E240, tubular structure:- made from steel hollow sections from Apollo / Jindal/ Bhushan/ ISI marked & equivalent, conforming to IS 1161/4923, minimum required grade YST 240, in the profile shape as per drawings with special plate connector, pinion joints, plates, hollow sections, etc. using flame cutting system, SAW/ MMAW/ MIG welding process with special plate connectors, pinion joints, plates, hollow sections to heights, tools and plants and necessary scaffolding etc. required for all operations involved. The structural members shall be painted with 60 DFT anticorrosive protection coating using paint/ primer of approved make (ASIAN/ MRF/ BERGER/ NEROLAC/ JUTON & equivalent) with one or two coat of Epoxy primer cum MIO 60 micron thick and final coat of polyurethane paint 60 microns thick (to be applied 2 coats). The item shall be executed as per approved drawings and direction of the Engineer in Charge complete. (Note: The work shall be executed as per manufacturer’s specifications wherever applicable, relevant code of practice and sound engineering practice)

Tensile Membrane Fabric: Tensile Membrane Fabric providing, fabrication, assembling and erection of pre stressed Tensile membrane fabric structure in desired profile as per drawing, with Nanoploymered Fluorinated Lacquer system on both sides, TYPE I Mehatop N or Versidige fabric having minimum weight of 700 g/sqm, HT polyester yarns count 1100dtex, minimum thickness 0.6mm, minimum tensile strength 3000N/5 cm in wrap and 3000N/ 5cm in weft directions, minimum tear strength 3000N/5 cm in wrap and 3000N/ 5cm in weft, as per specification with a 15 years warranty from manufacturer, etc. over steel frames with all fitting and fixtures such as galvanized MS membrane / end plate, Shackles. Rigging Screws, Turnbuckles, swedge, fork, keder rods & galvanized MS strands/ cables with stainless steel end terminals complete as per drawing/ details & as per technical specifications and as per the instructions of Engineer-in-charge. (Rate incudes cost of fabric. Shop drawings, patterning, forming, cutting, fabrication, hot weld stich of fabric, transport to the site, assembling and installation with GI cables, hardware, aluminium flat, EPDM gasket and required accessories wherever required complete including lifts up to all heights, tools and plants, and necessary scaffolding etc. required for all operations in all respect for fixing the fabric as approved shape as per drawing and direction of Engineer -in-Charge)

SITC of Qlear Crystal and Brass Modern chandeliers 50 Watt Qlear(COOL CHANDELIER)

Crompton or Equivalent Polycarbonate Wall lamp, 14 Watt with all complete job

SITC of Atomberg Renesa Smart+ IOT enabled Ceiling Fans with BLDC Motor and Remote

SITC OF Kühl PLATIN D4 fan

SITC of Atomberg Renesa Wall Fan

Add 18 % GST (in Basic Rate must fill 12)

Add 1% Labour Cess (in Basic Rate must fill 1)

MUNMUN KUMAR