Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.8 LAccepted-AOC VILLAGE TAPARIYAN BABINA CANTT BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | L1 | Accepted-AOC L1 | |
| 2 | L2₹9.0 L+₹17,384.54 (1.97%)Rejected-AOC 1442 1 NANADANPURA BABINA CANTT TEHSIL DISTT JHANSI UP | BABINA | JHANSI | UP | L2 | Rejected-AOC L2 | |
| 3 | L3₹9.0 L+₹17,650.54 (2.01%)Rejected-AOC CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | L3 | Rejected-AOC L3 |
Tender Value
Refer Docs
Closing Date
31 Jan 2022, 6:00 pmClosed
AGE I TALBEHAT
LAKEVIEW CAMP MIL STN TALBEHAT 284125
REPAIR/MAINT OF LT OH LINE TO LT UG CABLE IN ZONE 12 AT MILITARY STATION TALBEHAT
2021_MES_498406_1
AGE(I)/TBT/TOK-69/2021-22
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
MILITARY STATION TALBEHAT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE I TALBEHAT
Exempted
4 Feb 2022
31 Dec 2021
3 Feb 2022
7 Jan 2022
31 Jan 2022
14 Jan 2022
Amount
Taking down old damaged Cross arms, bracing supports, clamps, insulators and including nuts, bolts etc.
Taking down old damaged ACSR conductor of any size and type.
Excavation in in trenches not exceeding 1.5 mtrs wide & not exceeding 1.5 mtr in depth in soft or loose soil & getting out complete all as spfd & directed.
Removing excavated material not exceeding 50mtr &deposited where directed at a level not exceeding 1.5mtrabove the ground level.
Returning , filling in spreading, levelling, watering & well Ramming in layers not exc 25cm thick complete all as spfd & directed.
M&L for bricks common burnt sub class B designation for protection of cable complete all as spfd & directed.
M&L for natural local river sand for cable protection.
M&L in replacement of cable XLPE insulated heavy duty electric cables with Stranded aluminium conductor, 1100 volts grade, passing through trenches/ducts/pipes and climbing on poles/walls including fixing with proper size of aluminium lugs. For the following sizes. NOTE:- 1. Excavation and earth work to be measured and paid separately.
10 Sq mm x 2 Core (for street light)
10 Sq mm x 4 Core (for Buildings)
25 Sq mm x 4 Core. (for Panel to panel)
50 Sq mm x 3.5 Core (for Panel to panel)
95 Sq mm x 3.5 Core (for sub stn to sub main panel)
M&L for Earthing complete with galvanised steel earth plate electrode 60cm X 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below ground level earth plate connected with GI earthing strip (25X4mm) as earthing lead for transformer/feeder pillar box etc by means of bolts, nuts, check nut and washers of galvanised iron all as shown in Electrical plate No.3 of MES Sch part I and testing on completion. Necessary excavation and earth work, adequate common slat, charcoal dust and funnel PCC (1:3:6) type C-1 pit with pre-cast RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 6 mm dia bars, MS bar 3 Nos both ways funnel with 20,mm dia GI medium grade watering pipe earthing lead complete all as specified.
M&L for cutting of road/hard standing 60cm depth and 45cm width for laying of cable including making good the road/harstanding by PCC complete all as specified and directed.
Supply and laying or fixing in replacement GI tubes light grade 25 mm dia, on place of rusted GI pipe in support of cables, on pole/wall/laid in floor/in trenches.
Supply and laying or fixing in replacement GI tubes light grade 40 mm dia, on place of rusted GI pipe in support of cables, on pole/wall/laid in floor/in trenches.
Supply and laying or fixing in replacement GI tubes light grade 80 mm dia, on place of rusted GI pipe in support of cables, on pole/wall/laid in floor/in trenches.
Supply and fixing MCCB, 415 volt, adjustable type, 36KA, 4 pole, capacity 250 Amp.
Supply and fixing PVC twin core flexible 1.5 sqmm cable for street light fitting
Supply and fixing Hot press PVC moulded (Fire Proof) junction box of size 180 mm x 100 mm x 60 mm, complete with two No. aluminium bus bar of size 100 mm x 30 mm x 05 mm for phase and neutral, mounted on insulators, front opening door, locking arrangement and fixing with suitable size clamp and nut and bolt on pole, Including connection of incomer and out going cable by nut, bolt and washer of suitable size and proper lugs, making hole in bus bar complete. .
Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)
M/S SHIVA TRADERS
HARNAM SINGH ANIL SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .