REPAIR / REPLACEMENT OF INTERNAL WIRING, SUB MAIN WIRING INCLUDING DBs, MCCBs, CEILING WALLS COMPLETE AND ALLIED WORKS AT AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD

Amount

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete, including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good the disturbed surfaces of walls, Floors, ceilings etc. complete all as specified and directed by Engr in charge.

Taking down carefully existing wooden board, Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete and making good the disturbed surfaces of walls complete all as specified and directed by Engr in charge.

Taking down carefully sub main wiring of size including batten and making good disturbed surface of wall complete all as specified and directed by Engr in charge.

M&L complete for wiring with cable of size 1.5 Sqmm single core copper multistrand conductor including continuous earth wire, using cable FRLS insulated(unsheathed) 1100 volts grade conforming to Is-694 drawn in to and including concealed PVC rigid conduit medium duty with all fittings and fixing accessories ISI certified IS 9537 part -3 and terminated in to pressed steel metal flush boxes suitable for modular accessories and including modular cover plates with frame for mounting switches, socket regulator, brackets etc and including necessary cement work, cutting chases pinning in making good to facing and pointing in cement mortar (1:3) to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete all as specified and directed by Engr in charge for followings:- Note: Cutting not exc 4cm girth and 4cm width.

One light / fan point controlled by one, one way switch

One fan point controlled by one, one way switch and regulator.

One 3 pin socket out let 5 amps independent

One 5 pin, 5 amps socket point in same board with other switches.

One buzzer point controlled by, one bell push button on the same board.

One light point controlled by two, two way switches

One 3 pin socket out let 15 amps independent but with cable of size 4 Sq mm in point wiring and 4 Sq mm in continuous earth wire. Note for sl item Nos 4.10 to 4.70 Cable to be incorporated in point wiring/sub main wiring shall be of any of approved make of list.

M&L for modular switch one way 6 amps 1 module complete all as specified and directed by Engr in charge.

M&L for modular switch one way 16 amps 1 module complete all as specified and directed by Engr in charge.

M&L for modular switch two way 6 amps 1 module complete all as specified and directed by Engr in charge.

M&L for modular bell push 6 Amps 1 module complete all as specified and directed by Engr in charge.

M&L for modular socket 2 in 1, 5 pin 6 amps 2 module complete all as specified and directed by Engr in charge.

M&L for modular socket 2 in 1, 6 pin 6A/16 amp 2 module complete all as specified and directed by Engr in charge.

M&L for multi musical door bell, Ac 230 volts SP fancy colour complete all as specified and directed by Engr in charge.

M&L for modular fan regulator stepped type120 watt 2 module complete all as specified and directed by Engr in charge.

M&L for complete for ceiling rose surface Bakelite 3 terminal complete all as specified and directed by Engr in charge.

M&L for PVC/polycarbonate type Lamp holder, insulated body, with back plate for batten fittings complete all as specified and directed by Engr in charge.

S&F in replacement of energy saving LED 9 Watt lamp, B22, 3 STAR, 230 volts 50HZ complete all as specified and directed by Engr in charge.

M&L for sub main wiring with copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2 runs of 2.5 Sq mm and 1 run of 2.5 Sq mm as in continuous earth wire drawn in to & including PVC conduit medium grade of 20 mm dia with fittings and accessories duly concealed by cutting chases, pinning in, making good in cement mortar (1:3) and making good the disturbed surfaces Cutting shall not exceed 4cm girth and 4cm width and applying necessary periodically with one coat of putty and two coats of OBD to match with the surrounding complete all as specified and directed by Engr in charge.

M&L for sub main wiring with copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2 runs of 4.0 Sq mm and 1 run of 4.0 Sq mm as in continuous earth wire drawn in to & including PVC conduit medium grade of 25 mm dia with fittings and accessories duly concealed by cutting chases, pinning in, making good in cement mortar (1:3) and making good the disturbed surfaces Cutting shall not exceed 4cm girth and 4cm width and applying necessary periodically with one coat of putty and two coats of OBD to match with the surrounding complete all as specified and directed by Engr in charge.

M&L for sub main wiring with copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2 runs of 6.0 Sq mm and 1 run of 6.0 Sq mm as in continuous earth wire drawn in to & including PVC conduit medium grade of 25 mm dia with fittings and accessories duly concealed by cutting chases, pinning in, making good in cement mortar (1:3) and making good the disturbed surfaces Cutting shall not exceed 4cm girth and 4cm width and applying necessary periodically with one coat of putty and two coats of OBD to match with the surrounding complete all as specified and directed by Engr in charge. Note for sch item Nos 16 to 18: 2 runs of cable, 1 run of earth wire and 1 run of PVC conduit with accessories shall be measured as 1 unit of RM. Cable to be incorporated in point wiring/sub main wiring shall be of any of approved make of list.

S&F in replacement of energy saving LED 17 Watt lamp, B22, 3 STAR, 230 volts 50 Hz complete all as specified and directed by Engr in charge.

M&L in replacement for 1x 20 watts (4 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including lamp complete all as specified and directed by Engr-in-Charge.

M&L in replacement for 1x 10 watts (2 feet) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver including lamp complete all as specified and directed by Engr-in-Charge.

S&F in replacement of pluto flat panel 1 feet x 1 feet ultra modern Recess mounting luminaire suitable for after addl & altn of armstrong/grid/POP ceiling complete with separate electronic driver & high brightness SMD LED 15 watts with all accessories complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PLUTO NEO PANEL 2X2 feet ultra modern Recess mounting luminaire suitable for armstrong /grid/POP ceiling complete with separate electronic driver & high brightness SMD LED 36 watts with all accessories complete all as specified and directed by Engr-in-Charge.

S&F in replacement of PLUTO NEO PANEL 4X1, 36 W LED tube light, Environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong /Grid ceiling complete all as specified and directed by Engr-in-Charge.

S&F in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service 5 star rated including necessary connections complete all as specified and directed by Engr-in-Charge. NOTE: Unsv fan should be deposited at AGE E/M Store yard

S&F in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 230 CFM with service 5 star rated including necessary connections complete all as specified and directed by Engr-in-Charge. NOTE: Unsv fan should be deposited at AGE E/M Store yard

M&L for MCB dist board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar & din rail conforming to IS 13032/IS 8623 SPN dist board 08 ways double door complete all as specified and directed by Engr-in-Charge.

M&L for dist board, sheet steel, powder coated for MCB DB's with copper bus bar, neutral link and earthing stud conforming to IS 13032/IS 8623 TPN vertical 4 ways double door for three phase out going including MCCB 4 pole 415 volts 100 Amp 16 KA complete all as specified and directed by Engr-in-charge.

M&L for MCB SPN 240 volts, 'C' curve-10 kA of 40-60 Amp complete all as specified and directed by Engr-in-charge.

M&L for MCB SP 240 volts, 'C' curve-10 kA of 16-25 Amp complete all as specified and directed by Engr-in-charge.

M&L for MCB SP 240 volts, 'C' curve-10 kA of 6 Amp (Light) complete all as specified and directed by Engr-in-charge.

M&L in replacement of PVC exhaust fan of size 250 mm sweep, 1400 RPM single phase, single phase, 230 Volt Ac 50 Hz with louver shutter / grill and connection complete all as specified and directed by Engr-in-Charge.

M&L in replacement of for PVC exhaust fan of size 200 mm sweep, 1400 RPM single phase, single phase, 230 Volt Ac 50 Hz with louver shutter / grill and connection complete all as specified and directed by Engr-in-Charge.

Taking down and dismantling of ceiling fan, segregation of unserviceable parts, cutting and removing out copper winding, cleaning the armature, rewinding of fan armature with appropriate gauge of super enameled copper wire with necessary insulating materials such as vetex paper, cotton tape, PVC insulation tape etc varnishing with approved grade of unserviceable spares parts, cotton tape, PVC insulation tape etc varnishing with approved grade of insulation varnish and heating up, re-assembling the fan complete with replacement of unserviceable spares parts including necessary lathe work for fixing of bush/ bearing greasing the same with approved grade of grease, making all electrical connection and supply and fixing the following items and including necessary transportation to workshop, for 1200mm sweep fan:- (a) Flexible copper wire twin core upto 1.5 RM of length of size 23/0.0076 (b) Connection block -01 No (c) Insulation rubber bush -01 No (d) Split pin -02 Nos

All as per item No 34 but for 1400mm sweep ceiling fan complete all as specified and directed by Engr in charge.

All as per item No 34 but exhaust fan of size 300 mm to 450 mm sweep (except rubber rool, split pin) complete all as specified and directed by Engr in charge.

All as per item No 34 but pedestal fan/ wall mounted fan of size 400 mm to 600 mm sweep (except rubber roll, split pin) complete all as specified and directed by Engr in charge.

M&L for painting of ceiling fans of any size and any sweep / make with two coats of first grade quality of white synthetic enameled paint by spraying including preparation of old painted surface to remove all dust, oil mark etc and filling cavities with filler materials, before painting and writing MES No complete all as specified and directed by Engr-in-charge.

Taking down exhaust fan of any size and type and cleaning / servicing and overhauling the same, refixing the same on its existing position and connection up complete all as specified and directed by Engr-in-charge. Note: Spare parts shall be measured and paid separately.

S&F in replacement of and connecting up flexible copper wire three core of size 0.75 Sqmm complete all as specified and directed by Engr-in-charge.

S&F in replacement of gun metal bush of any size complete all as specified and directed by Engr-in-charge.

S&F in replacement of bearing for ceiling fan complete all as specified and directed by Engr in charge.

S&F in replacement of bearing for ceiling fan complete all as specified and directed by Engr in charge.

S&F in replacement of fan condenser 2.5 Mfd complete all as specified and directed by Engr in charge.

S&F in replacement of fan condenser 3.15 Mfd complete all as specified and directed by Engr in charge.

S&F in replacement of split pin as per sample complete all as specified and directed by Engr in charge.

S&F in replacement of nut, bolt as per sample complete all as specified and directed by Engr in charge.

M&L complete for earthing with galvanized mild steel earth plate electrode 600x600x6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5mtr (B.G.L.) and connected to galvanized iron earth strip 32x6mm by means of bolts, nuts, check nuts and washer of galvanized iron including PCC(1:2:4) type B1 precast RCC cover slab with suitable handle made of 12mm round bar, including necessary excavation &earth work in any type of soil. 20mm dia med gde galvanized steel tube for watering with one end fixed with cast iron funnel and wire mesh, 40 mmdia bore, light grade galvanized steel tubing up to 7.5 mtr length for drawing earth lead wire protection common salt, charcoal etc complete all as shown in EP No 3 of SSR Part 1 and testing on completion and dismantling old one complete all as specified and directed by Engr in charge.

S&F in replacement of Energy Saving LED 23 Watt lamp, B22, 3 STAR, 230 Volts 50 Hz complete all as specified and directed by Engr-in-charge.

S&F in replacement of IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LED 40 Watt complete all as specified and directed by Engr-in-charge.

M&L in replacement of wall mounting fan 400 mm sweep, 3/4 leaf transparent blade, pull cord control for speed and oscillation single phase, 230 Volt AC and connection complete all as specified and directed by Engr-in-charge.

S&F in replacement of Regal Batten for LED tube 22 watt compact batten suitable for single LED Tubelight with integral LED driver, available in single side connection complete all as specified and directed by Engr-in-charge.

S&F in replacement of UNECO TRACK LIGHT LED 15 watt track mounted LED light with modern design, compact size with High power COB LED to provide focused light, track light is a method of lighting where light fixtures are attached anywhere on a continuous track rail electrically charged as compared to the need of routing electrical wiring to individual light position complete all as specified and directed by Engr-in-charge.

S&F in replacement of Bamboo LED Bollard energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source LED 8 Watt complete all as specified and directed by Engr-in-charge.

M/S HARINDER SINGH (BID ID -3103076)

OM ASSOCIATES (BID ID -3102208)

M/S PARKASH ENTERPRISES (BID ID -3105211)

M/s S.G. BUILDERS (BID ID -3117769)

Haryana EngineerService (BID ID -3099647)

M/s Prakash Enterprises (BID ID -3103781)

MOHIT ENTERPRISES (BID ID -3104254)

A N BUILDERS (BID ID -3119057)

M/s R P Enterprises (BID ID -3118614)