Special repair and renovation of rooms of Dean planning and development office at Old Adm block

Amount

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of 1.00 mm (avg.) thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

------------do--------- one or more coats without priming with water thinnable cement primer

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately ) For Fixed portion / Openable Powder coated aluminum (minimum thickness of powder coated 50 microns) For Windows & Ventilarors

------------do------------- b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and allied fittings complete as required including the cost of PVC / neoprene gasket required Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminum snap beading shall be paid in basic item) : With glass panes of 5 mm thickness For Windows & Ventilarors

Higher Charges of welding set including cost of labour (welder with helper) & welding rods etc. complete.

Engagement of Labour/Mazdoor for different works.

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125 mm

Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete 300x16 mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 150 x 10 mm

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. Twin Rubber Stopper

Brick work with 2nd class bricks of class designation 7.5 in Super structure above plinth with cement mortar 1:6 (1 cement : 6 sand) including scaffolding, curing etc. complete.

Half brick masonry with 2nd Class bricks of class designation 7.5 in foundation, plinth & in superstructure with Cement mortar 1:4 ( 1 cement : 4 coarse sand) including scaffolding, curing etc. complete.

Reinforced cement concrete in shelves/suspended floors etc. including cost of Centering, Shuttering & finishing etc. complete but excluding cost of reinforcement. All work upto floor V level.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. TMT Bars (Fe-500D)

6 mm cement plaster to ceiling with cement mortar 1 : 3 (1 cement : 3 fine sand). All work upto floor V level.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm

Providing and fixing 16mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, edge moulding and granite polishing to give high gloss finish etc. complete. Granite of any colour or shade.

15mm Cement plaster on the rough side of single or half brick wall with cement mortar 1:4 ( 1 cement : 4 sand). All work upto floor V level.

Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make (Kajaria/Somany/Asian/Orient) in all colours, shades, size as approved by Engineer-in-Charge in skirting, risers of steps over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 sand) and jointing with grey cement slurry @ 3.3kg per sqm including coarse pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make (Kajaria/Somany/Asian/Orient) in all colour, shade as approved by the Engineer-in-charge laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and laying vitrified floor tiles in 600 x 600 mm with water absorption less than 0.08% and conforming to IS:15622 of approved make (Kajaria/RAK/Somany), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) excluding grouting the joints with white cement and matching pigments etc. complete but including tucking/roughening of the concrete floor and disposal of rubbish/mulba outside the University Campus.

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge Size of tile 600x600 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm iax40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board conforming to IS:2095-Part-I:2011 (Board wtih BIS Certification marks).

Providing and fixing of water proof ply of approved quality (Green /Orchid /Century) including cost of labour nut bolts for fixing of frames fevicol, nails etc, filling the surface with chalk putty mixed with paint, sand papering to prepare the surface even and smooth applying priming coat of wood primer and then (two or more coats) with synthetic enamel paint of approved brand and manufacture (Asian/Nerolac). Nothing extra shall be paid for any wastage (for manufacture of cupboard) complete 19mm Thick Ply

Providing and fixing decorative high pressure laminated sheet of plain/wood grain in gloss/matt/suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S including cost of adhesive of approved quality 1mm thick

Providing and fixing of paneling of 12 mm thick Marine plywood conforming to IS: 710 including applying a coat of wood primer and then painting with synthetic enamal paint (Two or more coats) of approved brand and manufacture (Make Asian/Nerolac).

Providing and fixing aluminum extruded section body tubular type universal hydraulic door closer,(having brand logo with IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete

Disposal of Mulba outside the University Campus by engaging Tractor & Trolly including cost of loading & unloading etc. complete.

Providing and fixing G.I. Pipes (Medium Grade) complete with G.I. fittings and clamps,including cutting and making good the walls etc (Make Parkash Surya/Jindal) 15 mm dia nominal bore

-------------do-------------- 20 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (DRP/ShIP Make)

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15 mm nominal bore

Providing and fixing PVC pipe of 4KG pressure of approved make (Make Finolex/Prince/Supreme) 110 mm dia

----------------do-------------------- 75 mm dia

----------------do------------------- 150 mm dia

Providing and fixing PVC Bend of approved make (Make Finolex/Prince/Supreme) 110 mm dia bend

---------------do--------------------------- PVC Floor Trap 100 mm x 75 mm

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve (Jaguar Make)

Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately

Providing and Fixing of branded Vitreous China Sinks/Wash Basin Flat Back and Rectange of Appoved brand and manufacture.white vitreous China Basin Size 550X400mm with a 15mm CP brass single hole Basin Mixer Make Cera/Jaguar/Hindware/Parryware)

Providing and fixing White Vitreous China Pedestal for Wash Basin Completely recessed at the back of reception of pipes and fittings

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with With common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)

Providing and fixing Parryware / Hindware/cera make Vitreous chinaware flat back half stall urinal of 580x380x350 mm with angle valve C.P. brass, dome waste,C.P. brass spreader (Jaquar Make) with brass unions and GI clamps complete including fittings, brackets, cutting and making good the walls complete in all respects

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge

Providing and laying in position cement concrete 1:2:4 ( 1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering, centering etc. complete.

Providing and laying in position cement concrete of specified grade including curing, cost of centering and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

ADITYA ENTERPRISES

ASHIQ HUSSAIN DAR