REPAIR MAINT OF STPs SEWAGE PUMP SUPPLY OF TREATMENT CHEMICALS AND ALLIED WKS UNDER AGE EM AT GE FAIZABAD

Amount

M&L for cleaning & general routine maintainance for complete STP 02 nos. at Himachal Niwas(650 KLD), Kandhar Line (550 KLD) and Sewage Disposal Plants 02 nos at OGB 32 & Punjab Niwas including pumps, motors, blowers,valves,LT panels,carbon media filter, dual media filter, chemical dosing plants and its accessories complete.Initially with the commencement of contract servicing including replacement of faulty spare parts of all plant equipments along with complete cleaning as a one time precautionary measure and thereafter maintenance and repairs as and when requried to run the plant with full efficiency without break down including Saturday,Sunday and holidays and mechanic with adequate experience should be avaiable to rectify in case any fault observed and all as specified and directed by Engr-in-Charge. Note :(a)The rate quoted against above items are inclusive of cleaning of Non Clog Submersible Pump Sets (1 working + 1 standby) upto 12.5 HP capacity every alternate month (total six times in the contract period) by lifting and lowering each from 02 Nos equalisation tank, 04 No underground sump of sewage disposal / treatment sumps including cleaning of flocculation chamber and tube settler each 02 Nos every alternate month. If the contractor fails to respond a penalty of Rs 500 per day per month will be deducted.(b)The rate quoted against above items are inclusive of repair, reassembling after testing Non Clog Submersible Pump/ Centrifugal Pump Set upto 12.5 HP capacity including lifting and lowering out carefully from underground sump of sewage disposal / treatment sumps by removing cable connection from LT panel.(c)All type of T & P for dismantling, repairing, lifting and lowering arrangement etc at site will be arranged by the contractor and cost of the same deemed to be included in the quoted rate.(d)The rate quoted against above items are inclusive of Motor housing & sleeve repairing on Lathe.(e)The rate quoted against above items are inclusive of all fast moving items and consumables as listed in particular specifications & like grease,topping up of chemicals daily etc, which may be required for smoth functioning of the plants as decided by GE.(f)The rate quoted against above items are inclusive of removal of vegetation growth on sludge bed and nearby areas if any every month.(g)The cost also includes for making stand by arragnment to avoid any type of breakdown by putting standby motor/pumpset serviceable at all time.(h)The above quoted rate shall not include for supply of spares/items which are covered under schedule 'A' Part-III and spares which are not indicated in sch. 'A' Part-III but are required for smooth running of plant shall be deemed to be included in the above quoted rate. GE's decision in this regard shall final and binding. However all labour charges for replacing spares, testing, commissioning transportation etc shall be deemed to be included in the above quoted rates.(j)Any other major spare parts not included in Sch 'A' Part-III which are otherwise urgently required for keeping the plant in serviceable condition shall be measured and paid separately. Decision of GE in this regard shall final and binding.(k)After getting complaint contractor will rectify the fault/ bottleneckness within 24 Hrs and only if rewinding of motor has to be done time to rectify the fault within 72 Hrs. If contractor fail for any reason, a fine of Rs 1500/- per day will be recovered from the contractor.

Supply only Ball Bearing No.6309(Make :-SKF/NBC/GPZ) for non clog monoblock submersible pump set of capacity12.5 HP . Make: Kirloskar/KSB.

All as per item no. 2 but Bush Shaft sleeve MS

All as per item no. 2 but Rubber Coupling

All as per item no. 2 but Copper wire S/E (super enamelled) with insulating material for rewinding

Supply only Ball Bearing No.6308( Make :-SKF/NBC/GPZ.) for non clog monoblock submersible pump set of capacity 5 HP of Make: KSB

All as per item no. 6 but Bush Shaft sleeve MS

All as per item no. 6 but Rubber Coupling upto No.14

All as per item no. 6 but Copper wire S/E (super enamelled) with insulating material for rewinding

Supply only Ball Bearing for centrifugal pump set of capacity 7.5 HP of Make Havells-Lafert & Kirloskar

All as per item no. 10 but Rubber Coupling upto No. 6

All as per item no. 10 but Gland packing

All as per item no. 10 but packing paper

All as per item no. 10 but water seal

All as per item no. 10 but Starting Coil

All as per item no. 10 but Brass Impeller

All as per item no. 10 but Copper wire S/E (super enamelled) with insulating material for rewinding

Supply only ball Bearing for monoblock centrifugal pump set capacity 3 HP of Make Kirloskar

All as per item no. 18 but Rubber Coupling upto No. 6

All as per item no. 18 but Gland packing

All as per item no. 18 but Packing paper

All as per item no. 18 but Water seal

All as per item no. 18 but Starting Coil

All as per item no. 18 but Brass Impeller

All as per item no. 18 but Copper wire S/E (super enamelled) with insulating material for rewinding

Supply only Ball Bearing No.6309 2RSC3 (Make :-SKF/NBC/GPZ.) for 3 phase induction motor 11 KW (for blower) of Make Kirloskar.

All as per item no. 18 but Fan Belt SPA-PT 1450 Fenner Make:- Powertran

All as per item no. 18 but Shaft sleeve MS

All as per item no. 18 but Gland packing

All as per item no. 18 but Packing paper

All as per item no. 18 but Starting Coil

All as per item no. 18 but Copper wire S/E (super enamelled) with insulating material for rewinding

Supply only GEAR OIL EP 90 HP (SHELLSPIRAX S2 G90 CASTROL HYPOY 90EP) for Air Blower Twin Lobe 400 Cum/Hr of Make Everest Blower & Model M5075.

All as per item no. 33 but Air Silencer & Filter

All as per item no. 33 but Ball Bearing 6305 Single Z Make :-SKF/NBC/GPZ.

All as per item no. 33 but Lip Seal 42/25/6

All as per item no. 33 but Timing Gear

All as per item no. 33 but Oil seal

All as per item no. 33 but O-Ring

All as per item no. 33 but Vacuum measuring gauge

All as per item no. 33 but Oil level gauge

All as per item no. 33 but Ball valve brass 32mm. Make:- Aarti or equivalent

All as per item no. 33 but Butterfly Check Valve Wafer Type PN 1.6, 80mm. Make:-Mitra or equivalent including nut bolts and gasket.

Supply only spare parts of LT panel make and model approved by GE , On load Changeover 4 pole 200 Amp, 415 volt, in Sheet Steel Enclosure type of ( make: L&T or equivalent ), complete all as specified and directed by Engr-In-Charge .

All as per item no. 44 but On load Changeover 4 pole 63 Amp, 415 volt, in Sheet Steel Enclosure of make: L&T or equivalent

All as per item no. 44 but Digital type Voltmeter with LED display suitable for 3 phase with accuracy class 1 of make: L&T or equivalent

All as per item no. 44 but Digital type Ammeter with LED display suitable for 3 phase with accuracy class 1 of make: L&T or equivalent

All as per item no. 44 but Tape wound ring type Current Transformer suitable for Bar primary of rating 200/5 Amp, burden 5 VA of make: Kappa/ Matrix or equivalent

All as per item no. 44 but 3 pole power contactor 415 volts with AC 1 rating 45 A & AC 3 rating 25 A with 1 NC Aux contact of make: L&T, or equivalent in Schneider/ Siemens

All as per item no. 44 but 3 pole power contactor 415 volts with 30 Amp AC3 duty rating 1 NO or NC and type MNX18 of make: L&T, type ML-4, or equivalent in Schneider/ Siemens

All as per item no. 44 but Thermal overload relay of Capacity range 4.5-7.5 Amp with MN 2 (Directly operated ) of make:L&T or equivalent in Schneider/ Siemens

All as per item no. 44 but Thermal overload relay of Capacity range 6-10 Amp with MN 2 (Directly operated ) of make: L&T or equivalent in Schneider/ Siemens

All as per item no. 44 but Thermal overload relay of Capacity range14-23 Amp with MN 2 (Directly operated ) of make : L&T or equivalent in Schneider/ Siemens

All as per item no. 44 but MCCB 4 pole 160 Amp, 415 volt, 25 kA of make: L&T or equivalent in Schneider/ Siemens

Supply only MBBR media fluidised type of existing nature

Supply only Activated Carbon Media including removing of old media from tank and cleaning of tank complete with suitable chemicals

Supply only Iron screen bar of size 25X5mm thick flat (removable type ) in 2 mesh size (1 small & 1 big mesh )

Supply only Sodium Hypo Chlorite Liquid (10% chlorine content) in 50 Kg drum for dosing system, disinfection & chemicals with testing certificate [Note- Drums will be returned to the contractor after consumption of chemicals if any as specified and directed by Engr-in-charge]

All as per item no. 60 but Poly Aluminium Chlorite (PAC) Liquid (10% Al2O3 content, PH:3-5) in 50 Kg drum

All as per item no. 60 but Polyelectrolyte (10% concentration solution) in 25 Kg bag of Make: Acuro or equivalent.

All as per item no. 60 but Dosing Tank cylindrical vertical with closed top of capacity 500 ltrs

Supply only Weighted suction line strainer 3/8", Part no.- ST138 of (make: Declibac or equivalent) for Dosing plants of chemicals (PE,PAC,Sodium Hypochlorite)

All as per item no. 64 but 3/8" white suction/discharge tubing, Part no.- MALT002 of make: Declibac or equivalent

All as per item no. 64 but Check valve duckbill only (PK-5), Part no.- MCCVDBO of make: Declibac or equivalent (pack of 5)

All as per item no. 64 but Connecting nut 3/8", Part no.- MANUT00 of make: Declibac or equivalent

All as per item no. 64 but Connecting nut 3/8" with adapter(PK-5) , Part no.- MCADPTR of make: Declibac or eqvlt (pack of 5)

All as per item no. 64 but Ferrule 1/4" (PK-24), Part no.- MCAK200 of make: Declibac or equivalent (Pack of 24)

Supply only Butterfly 80 mm bore PN 1.6 of (Make:- L&T and Castle or equivalent.) valve 'ISI marked' both ends flanged and drilled cast iron including necessary nut bolts and gasket

All as per item no. 70 but Butterfly 100 mm bore PN 1.6 of Make:- Castle or equivalent.

All as per item no. 70 but Sluice 80 mm bore PN 1.6 of Make:- BIR or equivalent.

S&F FR PVC Insulated Single core unsheathed Industrial Flexible cable of size 16 sqmm conforming to IS 694:2010 with bright annealed copper conductor in existing panel including taking out of old one all as specified and as directed . Make : Polycab or equivalent .

Collection of water samples of STP located in different pockets of cantonment area in decontaminated sterilised bottles and testing of water samples for following essential parameters as per IS:10500- 2012 from Govt Lab or NABL accredited laboratory: - (i) pH value (ii) Ammonical Nitrogen ( mg/lt) (iii)Total suspended solids (mg/lit) , (iv) Chemical Oxygen Demand (COD) mg/lit , (v) Biological or Biochemical oxygen demand (BOD) mg/lit (vi) Faecal Coliform (MPN/100 ml) (vii) Esseceria Coli (E Coli) (viii) Total Phosphorous (mg/ltr) (ix) Total Nitrogen (mg/ltr) all as specified and as directed .

Cleaning of Under Ground sewage disposal Sump every alternate month (total three times in the contract period) internally as well as externally of capacity upto 10000 gallons after pumping out of residual sewage/ water with opening of choked/jammed suction/delivery all lines of sewage pump in sump well ( size upto 10 mtr dia and 10 mtr depth max) fitted with submersible sewage pumpset of capacity upto 12.5 HP including removing deposit, sand from inside the sump by rodding , air presure or other mechanical means , scrubbing and washing side walls and bottom with bleaching powder solution and making surface free from any fungus/ algae/ vegetation, filling of cavities inside and outside of tank with cement mortar 1:3 mixed with quick settling chemical and applying one coat of white wash inside including top side by rodding. Any other work reqd for cleaning includes elctrician work, plumbing works or mechanical means reqd if any is deemed to be included in quoated rate & writing date of cleaning outside complete all as specified and directed. [Note :-(i) Under Ground Sump include sewage disposal sumps of Punjab Niwas, OGB-32, Himachal Niwas and Kandhar line (ii) All type of T&P including portable non-clog pump for pumping out residual water before cleaning and Labour etc shall be arranged by the contractor and rate for the same deemed to be included in the quoted rate. (iii) Contractor will dispose off the material taken out from the installation at a distance upto 50 Mtr as directed by Engr-in-Charge.]

M&L for Star HD Flex Electric Shock & it's Management/ Fire order/ SOP Chart showing the Effects, Management, Precautions against electric shock of dimension (90cm×60cm) fixed on Iron square bar Frame (90cm×56cm×2cm) welded together at each end screwed with 2 Hooks for fixing on the wall all as directed by Engr-in-Charge

M&L for Star HD Flex 120cmx60cm showing description of Single Line Diagram of Plant and Machinery Chart having varous tanks,beds,dosing system & motor coupled Pumpsets and Generators wherever installed all as directed by Engr-in-Charge

Supply only lead acid battery 12 volt 180 Ah including initial charge of make: Exide or equivalent complete all as directed by Engr-In-Charge

M&L for Rolled mild steel in Joist ,channel,angle, or tee sections, fixed independently, without connecting plates, etc. for repair to staircase,hand rails and back rest of STP or as otherwise directed. [Note: All T&P and labour charges including weldind work for working on STP deemed to be included in the quoted rate]

M&L for applying two coats of synthetic enamel paint on MS,CI pipes, sluice valves,railings,staircase as per existing colour of both STPs and sewage disposal plants complete after preparing of old surfaces complete all as specified and directed by Engineer-in-charge. [Note: - (i) Different colours as per existing shall be applied as per standard colour code and cost of the same deemed to be included in the quoted rate.]

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI strip 32x6mm by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI strip is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontally to the equipment. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009).

S&F lifting chain of 5 Rm forged well and suitable for lifting of Non clog submersible pumpset of capacity upto 12.5 HP in underground sewage disposal sumps.

Supply and fixing LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp . Make Cropmton or equivalent

Taking out old CPVC pipe including fittings complete all as specified and directed for 80 mm size ( Note- Excavation & earth work shall be measured and paid separately) ; -

S&F CPVC pipe of inner diameter 75 mm length 3 mtr each complete Schedule 40 pipes & Plain Schedule 80 fittings in trenches complete all as specified . Make : Supreme or equivalent

Excavation in trenches n.exc. 1.5 mtr wide and n.exc. 1.5 mtr in depth for laying / taking out water supply pipe line in soft/loose soil, taking out excavated material,forming bottom etc complete all as specified and directed..

Returning filling in including,spreading ,levelling watering and well ramming in layer in n.exc 25 cm in soft/lose soil all as specified directed.

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above starting point as in soft/loose soil complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as directed

S&F Framed brackets of angles or tees eith web ang flanges cut to shape , drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, riveting,etc, n exc 10 Kg each brackets, conforming to Fe 410-0 or fe 310-0 (Brackets over 10 kg each to be measured under 'Structural Steel')

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 500MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550MPA as in ridge of roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 2 coats of synthetic enemel painting to steel material surfaces of any description, not exceeding 10cm width or girth when unconnected with other painting or when painted in a different tint over red oxide primer incl preperation of new surfaces.

Material & labour for round seven core submersible cable PVC insulated and sheathed multistranded copper conductor of cross sectional area 1.5 sqmm of make:Uniflex/ Havells/ Polycab or other specified make including taking out of old cables by lifting of submersible pump with column pipes and lowering the same after replacing the cable all as specified and as directed by the Engr-in-Charge.

Disconnecting electrically incomming and outgoing LT UG cable of LT panel of any size and replace burn/unsv suitable size of aluminium bus bar, Welding work for hinches and doors, fixing the locking arrangement including scraping outdoor/indoor side of LT Panel and one coat of redoxide, two coat of synthetic enamelled seimens gray spray of outdoor/Indoor side and reconnecting LT UG cable with fixing aluminium lugs by using crimping tool, nut, bolt washer etc and all necesary work required for smooth functioning of LT panel all specified and directed by Engr-in-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning. Make - Schneider or equivalent

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of 25 A and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Khan Brothers

His And Her Enterprises