REPAIRS TO MISC WORK OFFR ACCN. HITUE, TAPONG AND WARD ROOM INCLUDING BOUNDARY WALL, PATHWAY ETC AT INS KARDIP, KAMORTA AND REPAIRS TO PLUMBING JOINERY AND MISC WORKS IN OTM BLDG, SHIP GALLEY, TRINKET AND NAVAL STORE AT INS KARDIP KAMORTA

Amount

Demolition of cement concrete (un-reinforced) in ground floors and pavings exceeding 15 cm thickness above ground floors complete all as specified and as directed.

Material and Labour for hardcore of gauge not exceeding 63mm, deposited, spread and leveled in layers not exceeding 15cm thick watered and rolled/rammed to a true surface all as specified and as directed.

Material and Labour for 100mm thick cement concrete 1:4:8 type D2 using 40mm graded aggregate as in flooring all as specified and as directed.

Material and Labour for cement concrete 1:2:4 type B0 (using 12.5mm graded aggregate) as in flooring and rounded or chamfered on edges all as specified and as directed.

Material and Labour for providing cement concrete type C2 1:3:6 (40mm graded aggregate) in foundation filling plinth protection and mass concrete all as specified and as directed.

Supply and Fixing of wind ties format including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work confirming to Fe 290 Gde E-165 all as specified and as directed.

Supply and Fixing of framed works as in truss, rafter, purlins, doors or gates or fencing post of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks or hinges or steel hanging door fittings and similar works confirming to Fe-290 Gde-E-165 all as specified and as directed.

Material and Labour for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Material and Labour for painting on new steel surfaces not exceeding , 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.

Demolition of precast cement concrete block waling as in manhole, septic tank and drains etc built in cement mortar all quoins, arches pillars etc but excluding ashlars facings dressed stone etc all as specified and as directed.

Material and Labour for precast cement concrete block masonry with solid blocks, type C1 1:3:6 (20mm graded stone aggregate) exceeding 10cm in width and set in cement mortar 1:4 all as specified and as directed complete.

Taking down of cement plaster of any description or thickness/chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to received new plaster complete all as specified and as directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) on walls in CM 1:4 complete all as specified and as directed.

Material and Labour for preparing new plastered surfaces of wall and applying two coats of cement based paint all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 metre in depth for foundation etc. or for shafts, wells cesspits, pier hole etc. n. exc. 10sqm on plan and getting out in any type of soil all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm in any kind of soil depth in solid, complete all as specified.

Removing excavated material exc. 250m but n.exc 500m and depositing where directed at a level n exc 1.5m above the starting point all as specified and as directed.

Dismantling of wall paneling/ceiling (fiber, pulp, insulation etc) of any description of any thickness including cover fillets complete all as specified and as directed by Engine-in-Charge.

Supply and Fixing of aluminium anodized snap grid frame (with minimum 15 micron uniform anodic coating) size of 600 X 600 mm consisting of Tee/Angle section, size 40X40X2 mm thick as approved make conforming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass/stainless shunk screws. aluminium perimeter angles fixed to wall wooden frame at centre to centre and fixing frame to level adjusting anchors 6 mm dia GI wire hook in Tee members at 1.5 m Centre to Centre fixed to steel truss or roof complete all as specified and directed

Material and Labour for fixing in position 4 mm thick Non Asbestos designer ceiling board of size 595X595 mm as per manufacturer's specification complete all as specified and as directed. Make: Everest/Ramco/Charminar ; texture, oceanic, lake and hill, electra

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complet all as specified and as directed by Enginer-in-Charge.

Supply and Fixing of 0.71 mm thick Aluminium corrugated sheeting Alloy 31000 H4, STUCCO Embossed finish with two corrugations side lap fixed with L-type or J-type hook and Aluminium washer in roof with end laps all as specified and as directed.

Material and Labour for preparation of old painted surfaces of steel of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint to top exposed steel roofing sheets, complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not hacking), removing serviceable tiles away site and rubbish off the premises complete all as specified and as directed.

Material and Labour for screed bed or bedding layer of mortar 15mm thick in cement plaster 1:4 for laying finishes as directed and as specified.

Supply and Fixing of non skid coloured ceramic tiles 300mm x 300mm x 7 to 8mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and Labour for rendering 10mm thick cement plastered as bedding layer / screed bed on fair surfaces of brick in cement mortar (1:3) to receive wall tiles complete all as specified and as directed.

Supply and Fixing of glazed ceramic tiles 300mm x 200mm x 6 to 7mm thick in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Supply and Fixing in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, chain and plug and porcelain stopper but including brackets, waste couplings 32mm dia, cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed.

Supply and Fixing in repairs, vitreous china squatting pan, orissa pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush type) with and including connection to trap, set in and including concrete but connection to flushing pipe, anti syphonage pipe etc., complete including making good to floor, connection to drain (or out going pipe) etc., complete all as specified and as directed by Engineer-in-Charge (Make : Cera/Johnson/Parry Ware).

Supply and Fixing in repair European type WC (Pedestal Pattern) complete including pedestal pan and trap including connection to drain, flushing pipe, seat cover (excluding fixing bolt, flushing cistern complete all as specified and directed.

Supply and Fixing in repairs PVC valve less, syphonic action type flushing cistern, 10 litres, low level, white with inlet ball valve, float and handle including brackets complete all as specified and directed.

Taking up or down steel water tubing and connection 15mm dia complete all as specified and as directed.

Supply and Fixing of tubes, medium grade 15mm dia bore galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

Refixing of old steel tubing obtaining from taking down and connections new or old position (wall, ceiling, floors etc.,) of 15mm bore complete all as specified and directed.

Taking up or down steel water tubing and connection 20mm dia complete all as specified and as directed.

Supply and Fixing of tubes, medium grade 20mm bore galvanized with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Refixing of old steel tubing obtaining from taking down and connections in new or old position (wall, ceiling floors etc.,) of 20mm bore complete all as specified and directed.

Supply and Fixing of 32mm bore low density polyethylene pipes (LDPE) of pressure rating 6 Kgf/cm2 laid in trenches complete all as specified and directed.

Supply and Fixing of in repairs angle stop cock 15mm bore, fancy type, chromium plated (concealed type) screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete all as specified and directed.

Supply and Fixing of in repairs bib tap 15mm bore, fancy type, cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly screwed for iron and fixed complete all as specified and directed.

Supply and Fixing of in repairs pillar taps fancy type, cast copper alloy, with capstan head as chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and ply nuts screwed for iron pipes and fixed complete all as specified and directed.

Supply and Fixing of in repairs 32mm size waste couplings of PTMT (half or full threaded) minimum weight 32mm 45gms complete all as specified and directed.

Supply and Fixing of in repairs towel rail 450mm long of Stainless Steel fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 170gms) complete all as specified and directed.

Supply and Fixing in repairs swivel shower of PTMT any coloured for fixing with 15mm pipe (minimum weight 40gms) complete all as specified and directed.

Supply and Fixing in repairs shower arm 15mm size, 195mm long with bend of 45 degree with flange of PTMT any colour complete all as specified and directed.

Supply and Fixing of PVC connections 15mm size 600mm long with PTMT nuts complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame), not exceeding 1.5 Sqm each complete all as directed.

Taking down chowkats or frame with shutters (without taking off shutters from the frame), exceeding 1.5 sq. m but n.exc 4.0 sq. m each complete all as directed.

Taking down shutters of any description not exceeding 1 sq. m each all as specified and as directed

Taking down shutters of any description exceeding 1 sq. m and not exceeding 2.0 sq. m each all as specified and as directed

Supply and Fixing for 2nd class HW plain, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

Supply and Fixing of 35mm thick, 2nd class HW plain, framed, paneled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial veneers ; supplied and fitted to chowkat all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of flush shutters, 25 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed.

Supply and Fixing of 2nd class HW, 35mm thick glazed and skeleton shutters, open rebated and rebated and prepared to receive glass or gauge etc., without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for screwing glass / gauge etc., sizes of members of shutters as specified in SSR Part-I, section 8 clause 8.24 (a) all as specified and directed.

Supply and Fixing of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19 x 19mm MS square tube and 1.2mm wall thickness complete all as specified and as directed. Make - Rajashree

Supply and Fixing of solid panel PVC door shutter 30mm thick (style) consisting of frame made out of Ms tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with a solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either sides and as gap inserts for top and bottom rail paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and drawing complete all as specified and as directed. Make - Rajashree

Supply and Fixing of Stainless Steel butt hinges 100mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and directed.

Supply and Fixing of Stainless Steel butt hinges 75mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and directed.

Supply and Fixing in repairs 150mm length mild steel ordinary rat tail rod of pattern helical springs including roller and roller plate complete all as specified.

Material and Labour for extruded aluminium alloy handles 150mm, fabricated type, anodized complete all as specified and directed.

All as per item 62 hereinbefore but 100mm

Material and Labour for aluminium anodized barrel tower bolt of extruded section length of bolt 150mm complete all as specified and directed.

Supply and Fixing of aluminium anodized barrel tower bolt of extruded section length of bolt 100mm complete all as specified and as directed.

Supply and Fixing of aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and as directed.

Supply and Fixing in repairs 12mm dia stainless steel curtain rail 12 mm dia fixing with all types of bracket to required length complete all as specified and as directed. Note : rate included for side bracket for fixing complete

Hacking out old broken unserviceable glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.

Supply and Fixing of 3mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed.

Material and Labour for preparation of new or previously untreated wood surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over one coat of pink primer complete all as specified and directed.

Supply and Fixing of pre-painted corrugated galvalume (55% aluminium + 4 3.5% Zinc+ 1.5% Silicon) steel sheets as in roofing/wall cladding, 0.50mm thick (Total coated thickness), conforming to AS-1397/ASTM A-792 and having yield strength minimum 550 Mpa fixed with self drilling metal coated screw of appropriate size, self taping bolts and fixed as per manufacturer’s instructions complete all as specified and directed. (Note: The sheet shall be laid with one corrugation side lap and one end lap minimum 150mm all as per manufacturer’s instructions along with wind ties).

Ditto all as per item No. 71 herein above but plain galvalume sheet.

Material and Labour for coloured chequered cement concrete tiles 30cm x 30cm x25mm thick, set in floors etc laid over and including 20mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground embedded in natural ground.

Dismantling of barbed wire fencing coiled on drum for reuse complete all as directed.

Dismantling fencing wire mesh of any type

Excavating soft/loose soil in post holes (or similar holes) each n.exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm watering and removing surplus soil to a distance in exc 50m and making good surface.

Material and Labour for pre-cast reinforced cement concrete type B1 1:2:4 (20mm graded aggregate) in posts, fencing posts, straining or terminal posts, struts etc. for fencing average sectional area exceeding 100 and not exceeding 250 sq cm with or without chamfered angles and flat, splayed, rounded or mitered tops all as specified and as directed.

Material and Labour for mild steel TMT bars 10mm dia and over cut to length bent to shape required for fixing including cranking bending spirally for hooping ends and binding with and including mild steel wire (amended) not less than 0.9mm dia.

All as per item 79 hereinbefore as above item but 6 to 8 mm dia and over up to and including 10mm dia in stirrups spacers and binders.

Supply only PVC vinyl coated GI chain link mesh of size 50mm x 50mm, 3.6mm GI wire with 1mm thick PVC Vinyl coated all around complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

Material and Labour for mild steel round bar/TMT 10 mm and over as in tightening of chain link fencing including cutting to shape, necessary drilling, bolting etc all as specified and as directed.

Supply and Fixing of 12mm dia mild steel rag or lewis bolts screwed one end with hexagonal or square nuts and washers at one end and secured the other or screwed the both ends each screwed ends to be fitted exceeding 10 cm and n.exc 15cm long.

Supply and Fixing of wind ties format including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc, and similar work confirming to Fe 290 Gde E-165 all as specified and as directed.

Supply and Fixing of galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provision of galvanized mild steel wire staples or steel pins etc. as directed (each line wire to be measured)

Fixing only 2 strand steel barbed wire 2.24 mm dia barbed wire with 2 mm barbs at 75 to 100 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as directed (each line wire to be measured)

Material and Labour for cleaning the chocked soakage of manholes of any size and depth and removing scum/sludges to a distance exceeding 250m and n.exc 500m and cleaning with fresh water by taking out carefully cover slab placing in position including setting the cover slab in cm 1:6 complete all as specified and as directed

Material and Labour for cleaning of blocked CI pipe line 100 mm bore, carefully in between manholes using splited bamboo, cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete

Material and Labour for cleaning of blocked CI pipe line 150mm bore, carefully in between manholes using splited bamboo cleaning rod, binding wire etc and flush with fresh water and disposed off the sludge complete.

Material and Labour for removing RCC cover slab of septic tanks of various capacities and taking out scum/sludges including foul water and collect the same in closed container and depositing in earth pit of sufficient size and depth in any type of soil within the defence land where directed by Engr-in-Charge to a distance exceeding 250m and not exceeding 500m, returning and filling in earth in excavated pit after complete disposal of scum/sludges chamber inlet and outlet pipe, MS rungs, septic tank cleaning with fresh water applying one coat of bituminous paint on steel surfaces such as MS rungs handle, inlet and outlet pipes etc, and filling tank with fresh water up to level as directed placing the RCC cover slab in position and set in CM 1:6 including cleaning the sewage line from last manholes to septic tank complete all as specified and as directed

Material and Labour for cleaning of filter bed/ soakage well etc by removing the filter media into scum/sludges in foul position n.exc. 1.6m deep and getting out complete all as specified and as directed.

Material and Labour for loose filling with filter media aggregate (stone) of guage 40mm to 80mm in filter bed soakage pit/ well etc. complete all as specified and as directed.

Material and Labour for cleaning the old serviceable filter bed media obtained from above and refilling in filter bed/ soakage pit well etc. with suitable filter media complete all as specified and as directed.

Cleaning of blockage manually by rodding, pumping, etc. and removing the deposited sludge/solid/liquid material, outside MD land, complete all as directed from the following: - (a) Water closet any description including trap and CI pipe line upto first manhole

(b) Floor trap/Nahani trap upto & including gully trap

(c) Pipe from gully trap upto first manhole (excluding gully trap)

Demolition of concrete of any description and in any position not otherwise specifically provided for unreinforced concrete complete all as specified and directed

Demolition of concrete of any description and in any position not otherwise specifically provided for reinforced concrete complete all as specified and directed

Dismantling of cast iron or reinforced concrete drain pipes jointed in CM and taking out of trenches /walls of 100 mm dia if required all as specified and directed

Dismantling of cast iron or reinforced concrete drain pipes jointed in CM and taking out of trenches /walls of 150 mm dia if required all as specified and directed

Material and Labour for providing cement concrete type C-1, 1:3:6 (20mm graded stone agg) as in coping benching, bed plate, including necessary form work complete

Material and Labour for precast RCC type B-1, 1:2:4 (20mm graded stone aggregate) as in cover slabs, manholes covers and similar article including necessary form work complete set in CM 1:4 all as specified and directed.

Supply and Fixing of TMT bars 6 to 8mm dia in reinforcement, cut to length, bent to shape required including cranking and bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed.

Supply and Fixing of CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, laid in trenches or in floor of 100mm dia complete all as specified and directed

Supply and Fixing of CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, laid in trenches or in floor of 150mm dia complete all as specified and directed

Supply and Fixing of CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, fixed with wall of 100 dia complete all as specified and directed.

Supply and Fixing of CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, , laid in trenches or in floor of 100 dia but except pipe complete all as specified and directed.

Supply and Fixing of CI soil/Waste/vent pipes (sand cast) in any length with or without ears with cement joints, laid in trenches or in floor of 150 dia but except pipe complete all as specified and directed.

Material and Labour for concrete bed to drain pipes including packing under and completely surrounding pipes after they are laid and tested in cement concrete type C-2 1:3:6 (40mm graded stone) for 100 mm bore pipes complete all as specified and directed

Material and Labour for concrete bed to drain pipes including packing under and completely surrounding pipes after they are laid and tested in cement concrete type C-2 1:3:6 (40mm graded stone) for 150 mm bore pipes complete all as specified and directed

Supply and Fixing of CI bends (any radius) diminishing or tappers of 100mm bore pie (larger bore measured)

Taking up or down old cast iron man hole cover and frame complete all as specified and directed.

Supply and Fixing of cast iron work grade FG 150, un machined, in brackets, gully traps, gratings, railing frames, manhole covers, fire and soot doors dampers, stop valve boxes, gate stops parts of ranges, balusters and similar articles n.exc.5 kg each complete all as specified and directed.

Preparing old decorated wall surfaces of any description, plastered or un plastered, having surface finish of any description, complete all as specified.

Preparing old decorated ceiling surfaces of any description, complete all as specified.

Complete removal of existing treatment and preparation of wall surfaces of any description, complete all as specified.

Material and Labour for One coat of white washing on decorated wall surfaces of any description, complete all as specified.

Material and Labour for One coat of white washing on decorated ceiling surfaces of any description, complete all as specified.

Material and Labour for One coat of dry distemper on decorated wall surfaces of any description, complete all as specified.

Material and Labour for One coat of distemper oil emulsion on decorated wall surfaces of any description, complete all as specified.

Material and Labour for Two coat of distemper oil emulsion on wall surfaces of any description complete all as specified.

Material and Labour for One coat of cement based paint on decorated wall surfaces of any description complete all as specified.

Material and Labour for One coat of anti fungal acrylic emulsion on internal wall surfaces of any description complete all as specified.

Material and Labour for One coat of anti fungal exterior acrylic emulsion on wall surfaces of any description complete all as specified.

Material and Labour for One coat of synthetic enamel paint over old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces, complete all as specified.

Material and Labour for One coat of synthetic enamel paint over old painted steel & iron surfaces including roof sheets and trusses etc of any description, not otherwise described over 10 cm width or girth, including preparation of surfaces, complete all as specified.

Material and Labour for Rendering 15mm thick on brick work or concrete surfaces, finished even and smooth on walls in cement mortar 1:6 complete all as specified.

Material and Labour for applying wall care putty, in two coats over a coat of alkali resistant cement based primer on wall surfaces & smoothening the surfaces with sand papers etc. (Preparatory to OBD/plastic emulsion/interior/exterior emulsion paints as directed complete all as specified. MAKE : BIRLA,JK,WEBER (SANT GOBAIN).

NOTE : An Amount of Rs 48,440.00/- towards Schedule of Credit shall be deducted to arrive the Contract Sum

ANITA VARMA ENTERPRISES

S K ENTERPRISES

M/s Pintu Furniture

M/s Ramesh Lal

SWASTHIK ENGINEERING WORKS

M/s Kamal Electrical

M/s UMA DEVI