Renovation and Restoration of left side corridor and Canteen at ground floor Indian Institute of Public Administration, New Delhi

S NO DESCRIPTION AMOUNT AMOUNT

Renovation and Restoration Works of

Canteen (Ground floor) at IIPA, New Delhi

2.00 ELECTRICAL WORKS 2,25,500.00 4,05,501.00

Renovation and Restoration Works of lift

B side Corridor (Ground floor) at IIPA, New

2.00 ELECTRICAL WORKS 1,99,480.00 57,240.00

Total (DSR +MR) 39,77,187.00

Digitally signed by AMIT

RENOVATION WORKS AT IIPA, NEW DELHI - CANTEEN (GOUND FLOOR)

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

Demolishing brick work manually / by mechanical means including stacking

1 15.7 of serviceable material and disposal of unserviceable material within 50

metres lead as per direction of Engineer-in-Charge.

15.7.4 In cement mortar CUM 2.00 2,060.20 4,120.40

Removal of existing exhasut fan and stacking it in location specified by the

client within the premises.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of

class designation 7.5 in superstructure above plinth level up to floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) SQM 5.00 1,123.80 5,619.00

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or

half brick wall of mix.

Polishing of existing granite flooring to achive glossy finish or as specified

Polishing and buffing on marble work/Granite work/stone dado work where

ever required to give gloss finish complete.

Steel work welded in built up sections/ framed work, including cutting,

7 10.25 hoisting, fixing in position and applying a priming coat of approved steel

primer using structural steel etc. as required.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar

Providing and supplying aluminium extruded tubular and other aluminium

sections as per the architectural drawings and approved shop drawings ,

the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including

super durable powder coating of 60-80 microns conforming to AAMA 2604

8 25.1 of required colour and shade as approved by the Engineer-in-Charge. ( The kg 200.68 414.30 83,142.97

item includes cost of material such as cleats, sleeves, screws etc.

necessary for fabrication of extruded aluminium frame work. Nothing extra

shall be paid on this account). The weight of aluminium extruded section

shall be taken for purpose of payment.

Supply and installation of Wall Panelling with 6 mm thk HPL(High Pressure

Laminate) Quality panels of standard size (1300 X 2800 mm)with both side

décor.The material should be have Non-fading high performance acrylic

polyurethane surface technology) conforming to ISI norms with CE Mark.

Panels are double hardened including acrylic polyurethane resin which is

thermally cured under high pressure.Installation of HPL panels will be done

by 3M Adhesive tape in any direction as per insruction of Site Engineer(with

Fixed and Sliding Points) with minimum recommended Aluminum section

of 100 x50 x 2 mm thick and L section 50 x 50 x 2mm thick held by Wall

Bracket with Wind load and Dead load slot as per design, anchored by

standard Hilti/Fischer or equivalent make anchor fasteners a.completed as

per manufacture specification/EIC. If

Digitally signed by AMIT

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

Providing and fixing double scaffolding system (cup lock type) on the

exterior side of building/structure, upto 25 metre height, above ground level,

including additional rows of scaffolding in stepped manner as per

requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre

centre to centre, horizontal & vertical tubes joint with cup & lock system with

M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the

scaffolding for working platform etc. and maintaining it in a serviceable

10 24.2 condition for execution of work of cleaning and/ or pointing and/ or applying sqm 555.00 338.25 1,87,728.75

chemical and removing it thereafter. The scaffolding system shall be

stiffened with bracings, runners, connecting with the building etc, wherever

required, if feasible, for inspection of work at required locations with

essential safety features for the workmen etc., complete as per directions

and approval of Engineer-in-charge. Note:- (1) The elevational area of the

scaffolding shall be measured for payment purpose. (2) The payment will

be made once only for execution of all items for such works.

Providing and fixing 6mm thick poly-carbonate sheet with 40% transparency

as per vendor and to be matched with existing on roof sheet of the atrium

including cost of removing of existing roof sheet and dumping/ storing the

same as per instruction of Project in charge, including cost of all necessary

fixing arrangement, framing wherever required complete with all respect as

per manufacturer details and specification and instruction of Project in

charge/ Architect. The cost to include dismantalling of existing roof sheet

and disposing it to nearest duping yard.

SITC of wood grain finish GI baffles of size 50mm x 150mm @ 150mm-

12 MR 200mm C/C including suspending channels and all other accessories as sqm 80.00 11,200.22 8,96,017.73

required complete.

Wall painting with acrylic emulsion paint, having VOC content less that 50

13 13.82 grams / litre, of approved brand and manufacture, including appliying

additional coats wherever required, to achive even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture to

give an even shade:

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture:-

15 MR Providing and installing of kitchen hood Nos 2.00 50,000.37 1,00,000.74

Supply, installation, balancing and commissioning of factory fabricated

E&M GSS sheet metal rectangular/round ducting complete with

16 2022 neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

16.12.1 supports etc. as per approved drawings and specifications of

following sheet thickness complete as required.

Electrical Works

Digitally signed by AMIT

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE NDSR AMOUNT

Supply , installation ,testing and commissioning of 'MCB double door

Distribution Boards dust and vermin 'proof protected and AC supply

operation including incoming MCB/ELCB/RCBO/MCCB as per

1 specifications and required capacity Neutral bar and Earth Terminal

complete as required and installed in concealed in wall after necessary

chase cutting with finishing /surface on wall including all fixing materials

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming and 36

nos (6-32A-10KA )SP MCB as outgoing.(ACDB)

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2

runs of 1100 V grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated

multistranded copper wires, in & including 25 mm dia , MS conduit surface/

2 concealed in wall / ceiling conferming to IS 732 including all accessries

such as junction boxes , conduit bends, elbows and ceiling rose , and

anodised GI switch box with modular switch ,modular plate and the box

covered with front plate

Wiring for circuit/ submain wiring alongwith earth wire with the following

3 1.7 sizes of FRLS PVC insulated copper conductor, single core cable in

surface/ recessed steel conduit as required.

3.1 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 150.00 327.00 49,050.00

Supply and fixing of following sizes of MS conduit along with accessories

4 1.20 in surface /recess including painting in case of surface conduit,or cutting

the wall and making good the same in case of recessed conduit as required

Supply, Installation, Testing and Commisioning of Suspended

/surface/Recessed type linear Luminaire of size 72mm (N.S.), Linear ultra

modular fixture made up of extruded aluminium housing with luminare

efficasy more than 100 LPW, CRI >80, CCT of 5700K. suitable for 220 V,

50 Hz, The luminare rated life (L70) >50000 Hours with High efficiency

driver with inbuild surge protection, over voltage protection, short circuit

protection and operating at >0.95 .making suitable arrangement for fixing

including connection with 3 x 1.5 sq.mm. The price shall include all

accessories including jointing kit for uniform continuous lines of light across

ceiling etc complete in all respect

SITC of heavy duty 100W (min) wall mounted fan having a blade length of

18 inches. It should have 3 speed control and a 90 degree oscillatiion and a

safety guard as per approved sample complete with all accessories as

SITC of 200mm dia inline exhaust fan of 500 cfm. It shall have a rotational

7 MR speed of 2500 rpm and a noise level of maximum 45 dB as per approved Nos 6.00 14,950.00 89,700.00

sample complete with all accessories as required.

Digitally signed by AMIT

RENOVATION WORKS AT IIPA, NEW DELHI - CORRIDOR (GOUND FLOOR - LEFT WING)

S.No. DESCRIPTION UNIT QTY DSR RATE DSR AMOUNT NDSR RATE

Ref. No. AMOUNT

Dismantling tile work in floors and roofs laid in cement mortar including

stacking material within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 130.00 113.55 14,761.50

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing

and false ceiling including disposal of unserviceable surplus material and

stacking of serviceable material with in 50 meters lead as directed by

Engineer-in-Charge.

Carriage of material by mechanical transport including loading unloading

1.1.1 Lime, murrum, building rubbish

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

4 11.3 aggregate) finished with a floating coat of neat cement, including cement

slurry, but excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 130.00 614.20 79,846.00

Providing and applying fibre reinforced elastomeric liquid water proofing

membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI)

of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat

of self-priming of elastomeric waterproofing liquid (dilution with water in the

5 22.22A ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry sqm 130.00 563.10 73,203.00

film thickness of complete application/system not less than 500 microns).

The operation shall be carried out after scrapping and properly cleaning the

surface to remove loose particles with wire brushes, complete in all respect

as per the direction of Engineer-in-Charge.

Providing & Applying polymer modified, flexible cementatious negative side

waterproofing coating with elastic waterproofing polymers on interior wall

plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of

cementatious waterproofing polymer(dilution with water in the ratio of 1:1)

and two coats of cementatious waterproofing polymer (dilution with water in

the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove

pre-existing paint film & loose particles till plaster is visible, complete in all

respect as per the direction of Engineer-in-Charge.

Digitally signed by AMIT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be

specified by the manufacturer) with water absorption less than 0.08% and

conforming to IS:15622, of approved brand & manufacturer, in all colours

and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse

7 11.41A sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the

joints with white cement and matching pigments etc. The tiles must be cut

with the zero chipping diamond cutter only . Laying of tiles will be done with

the notch trowel, plier, wedge, clips of required thickness, leveling system

and rubber mallet for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

TILE DADO :- Providing and fixing Vitrified tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all

Based of colours and shade of size 800 x 1200mm as approved by Engineer-in-

8 DSR Charge, in skirting, risers of steps and dados, over 12 mm thick bed of SQM 110.00 1,268.29 1,39,512.23

8.31 cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed with

pigment of matching shade complete.

Grouting the joints of flooring tiles having joints of upto 5 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg

of hardener and 0.20 kg of resin per kg), including filling / grouting and

finishing complete as per direction of Engineer-in-charge.

CEMENT PLASTER :- 15 mm cement plaster on the rough side of single or

half brick wall of mix.

Wall painting with acrylic emulsion paint, having VOC content less that 50

11 13.82 grams / litre, of approved brand and manufacture, including appliying

additional coats wherever required, to achive even shade and colour.

Preparation of complete set of shop drawings including finishing, MEP

services, details, design calcualtions etc. and any other details as and when

desired by Engineer In charge /client. A qualified professsional for the

purpose shall be appointed after due appproval from Engineer In Charge.

Electrical Works

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2

runs of 1100 V grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated

multistranded copper wires, in & including 25 mm dia , MS conduit surface/

1 concealed in wall / ceiling conferming to IS 732 including all accessries such

as junction boxes , conduit bends, elbows and ceiling rose , and anodised

GI switch box with modular switch ,modular plate and the box covered with

Digitally signed by AMIT

Wiring for circuit/ submain wiring alongwith earth wire with the following

2 1.7 sizes of FRLS PVC insulated copper conductor, single core cable in surface/

recessed steel conduit as required.

2.1 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 200.00 327.00 65,400.00

Supply and fixing of following sizes of MS conduit along with accessories

3 1.20 in surface /recess including painting in case of surface conduit,or cutting

the wall and making good the same in case of recessed conduit as required

Supplying, Installation, Testing & Commissioning of recessed type LED

downlighter having the following specifications etc. complete as reqd: -

a) Total Lumens : Not less than 1600 Lumens

b) System lumens efficacy : Not less than 105 lumen P/Watt

c) Driver efficiency : Not less than 85%

d) THD : Not more than 10%

e) CRI : Not less than 80

f) LED Life : Not less than 50000 hours @ LM 70%

g) Colour temperature : 4000-5500 K

h) Operating voltage range : 140 Volt to 270 Volt

i) Installation type : Recessed suitable for armstrong/grid/POP/Gypsum

j) Material of construction for housing : Pressure diecast aluminium

k) Material of construction for cover : High quality polycarbonate opal

concave diffuser.

l) Reflector - High reflective polycarbonate conical shaped

m) Electronic Driver : Integral type (Constant current supply)

n) Internal surge protection : Not less than 2.5 kV

o) Ingress protection (IP) : Not less than IP 20.

p) Size of Luminare - Dia 158mm x Height 90mm (Plus Minus 5%)

Digitally signed by AMIT