REPAIR MAINT OF INTERNAL ELECTRICAL SUPPLY CONTROL SYSTEM WITH ALLIED WORKS OF U AREA AND REPAIR AND REPLACEMENT OF OLD UNSV STREET LIGHT POST TOP TIMER SWITCHES STREET LIGHT CONTROL PANEL AND CONNECTED ALLIED WORKS AT KLP AND OTHER LOCATION AREA UND

Select, Excess (+), Less (-) Less (-)

Tender Inviting Authority: GARRISON ENGINEER SUKNA

Name of Work : REPAIR MAINT OF INTERNAL ELECTRICAL SUPPLY CONTROL SYSTEM WITH ALLIED WORKS OF 'U' AREA AND REPAIR AND REPLACEMENT OF OLD UNSV STREET LIGHT, POST TOP, TIMER SWITCHES, STREET LIGHT CONTROL PANEL AND CONNECTED ALLIED WORKS AT KLP AND OTHER LOCATION AREA UNDER AGE E/M OF GE SUKNA AT MIL STN SUKNA

Contract No: GE/SUK/ OF 2025-26

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and not exceeding 1.5 m in depth getting out in soft / loose soil complete all as specified and directed. Cum Excess(+) Full Conversion INR

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. Cum Excess(+) Full Conversion INR

Removing Excavated soils not exc 50 M and depositing where directed at a level not exc1.5 M above the starting point complete all as specified and directed. Cum Excess(+) Full Conversion INR

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge. Per Point Excess(+) Full Conversion INR

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceiling with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, modular plate and frame on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one light / fan / exhaust fan / call bell point controlled by one 5 / 6 Amps switch, all necessary cutting chasing (as required) and making good the disturbed surfaces including finishes to match with adjacent surfaces complete all as specified and directed. Note :- (i) Making good to match with the adjoining surface shall be included in the unit rate. (ii) Cutting chases shall be included in the unit rate. Per point Excess(+) Full Conversion INR

All as per Sl. item No. 5.00 above but for point wiring modular plate one 5 / 6 Amps socket outlet point on independent board. per point Excess(+) Full Conversion INR

All as per item No. 5.00 here-in-before but one 3 pin socket outlet / 15 amps on the independent board with other switches, with cables 2.5 sqmm size complete all as specified and directed per point Excess(+) Full Conversion INR

All as per Sl. item No. 5.00 above but for point wiring modular plate one 5 / 6 Amps socket outlet point on same board. per point Excess(+) Full Conversion INR

All as per Sl. item No. 5.00 above but for one light point controlled by two, 2 - way switches complete all as specified and directed Per Point Excess(+) Full Conversion INR

M&L point wiring with 1.5 sqmm single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including PVC casing caping (double lock pattern) and accessories on wall / ceiling surfaces etc. with and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel terminal boxes 60 mm deep, on walls with 3 mm thick plastic laminated / hylam sheet cover, fixed on wall / other surfaces with brass screws for mounting or housing switches, socket outlets, fan regulators, etc including all other fixing accessories for one light / fan / exhaust fan point controlled by one 5 / 6 Amps switch complete all as specified and directed. Point Excess(+) Full Conversion INR

All as per Sl. item No. 10.00 above but for one 3 / 5 Amps socket outlet point on independent board. Point Excess(+) Full Conversion INR

All as per item No. 10.00 here-in-before but one 3 pin socket outlet / 15 amps on the independent board with other switches, with cables 2.5 sqmm size complete all as specified and directed Point Excess(+) Full Conversion INR

All as per Sl. item No. 10.00 above but for one 3 / 5 Amps socket outlet point on the same board. Point Excess(+) Full Conversion INR

M & L concealed sub main wiring with 2 runs of 2.5 sqmm main wire along with 1 run of 2.5 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

M & L concealed sub main wiring with 2 runs of 4.00 sqmm main wire along with 1 run of 4.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

M & L concealed sub main wiring with 2 runs of 6.00 sqmm main wire along with 1 run of 6.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

M & L concealed sub main wiring with 4 runs of 10.00 sqmm main wire along with 1 run of 10.00 sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC conduit (medium grade) with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the disturbed surfaces including finishes to match with adjacent surfaces and including taking down complete all as specified and directed. NOTE:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length. RM Excess(+) Full Conversion INR

S&F switch piano flush type one way, 5 / 6 Amps, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch piano flush type one way, 15 / 16 Amps, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch piano modular type one way, 5 / 6 Amps, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch piano modular type two way, 5 / 6 Amps, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch piano modular type one way, 15 /16 Amps independent, 240 volt complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch socket combination 3 pin 15 Amp, flush type universal complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F switch socket combination 5 pin 6 Amp, flush type universal complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F Socket outlet 5 Amps 3 pin flush type complete all as specified and as directed. Each Excess(+) Full Conversion INR

S & F Socket outlet 15 Amps 3 pin flush type complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F socket outlet modular type 3 pin 5 / 6 Amps, 240 volts combined 2 modular complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F socket outlet modular type 3 pin 15/16 Amps, 240 volts combined 2 modular complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F ceiling rose, surface bakelite 65 x 50 mm three terminal complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs angular type lamp holder, PVC/Polycarbonate type with back plate suitable for Led lamp complete all as directed. Each Excess(+) Full Conversion INR

S&F in repairs stepped type electronic fan regulator two module, with 5 step, AC 50 Hz 240 Volts grade complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs electronic modular fan regulator, stepped type, white 120 W - 2 module complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F Bell push, flush type, 5 Amps single pole complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F modular type Bell push 6 A , 1 module complete all as specified and directed. Each Excess(+) Full Conversion INR

S &F Bell buzzer, Ding Dong AC. 230 volts, single pole completed all as specified and directed. Each Excess(+) Full Conversion INR

S &F Bell AC 230 volts, single pole completed all as specified and directed. Each Excess(+) Full Conversion INR

S&F MCB SP 6 to 32 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F MCB SPN 40 Amp , 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F MCB TPN 40 to 63 Amp, 10 kA, 240V 'C' curve complete all as specified and as directed. Each Excess(+) Full Conversion INR

M&L for Single pole blanking plate for distribution board complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs MCB ,SPN DB, 08 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed Each Excess(+) Full Conversion INR

S&F in repairs MCB ,SPN DB, 12 ways double door,Metal door, IP-43 IK 09 in 100A rated bus bars,earth bar,neutral links complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces complete all as specified and as directed. Each Excess(+) Full Conversion INR

S&F for 32 mm dia GI tubing light grade bracket over all 1.2 mtr length bent to shape 120 degree with cutting as required and bend to shape with flat iron clamp of size 32x6 mm, 2 Nos, suitable size of nut bolts and washers complete for fixing street light fittings on electric poles/bldgs for security complete including taking down old unsv complete all as specified and directed. Each job Excess(+) Full Conversion INR

Supply and fixing in repairs of LED street light luminaire 120 Watt (System Lumen output should not be less than 5400 Lumen) Energy saving and environmental friendly long life made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having IP-66 protection and Impact resistance of IK07 with 10 KV Built-in Surge Protection device with high performance LEDs,System Lumen Efficacy- > 120 Lm/Watt,power factor >=0.95, polyester powder coated with toughened glass having IP-66 protection, tempered protective polycarbonate diffuser, integrated high efficiency electronic driver with lower THD ,Colour Temp (CCT)- 6500 K operating range - 140 to 270 V, 50 Hz fixed with suitable fixing arrangement complete including LEDs with certification LM 79 for luiminare, LM 80 for LED source including all necessary internally pre-wired and connecting up incl taking down old unsv fittings from bracket of pole with repair/replacement warranty of 5 years of OEM complete all as specified and as directed. Make :- Philips/Crompton/Surya/Havells Each Excess(+) Full Conversion INR

All as per Sl. item No. 44.00 above but for of capacity 60 W (System Lumen output should not be less than 7200 Lumen). Each Excess(+) Full Conversion INR

Supply and fixing in repair of LED Floodlight luminaire of 500 W with a housing of pressure Die cast Housing and Anti-dust exposed Lens to ensure protection with anominal system lumen output not less than 120 Lm/W. The luminaire should have CRI > 70, SDCM <5 and CCT of 5700K and shall be compliant with IP66 and IK08 classification. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 35 deg C. The luminaire should come with Narrow beam to cover large distance with exposed PC optic lens. The luminaire should have fins on the back to ensure good heat dissipation and to prevent dirt from settling on the luminaire along with aiming angle scale. The electronic driver should be fully integrated and shall have a power factor >0.95 and THD <10% with a minimum inbuilt surge protection of 4kV, and 10KV external surge protection. The fixture should be suitable for an operationg voltage range of 120-277V AC. The driver should be BIS approved, fully potted driver and encapsulated with 440V Stress Voltage protection for 8 Hrs. High Cut off : 325V(+/- 15V). The housing should be of non-corrosive high-pressure single body die-cast aluminum with stand extreme environments. It should have corrosion resistant powder coating to pass NSS of 500 Hrs.The luminaire shall have repair/replacement warrnty of 05 years incl taking down old unsv fittings from pole/bldgs complete all as specified & as directed. Make :- HAvells Cat No JETA VALOUR FL INT P 500W/ Philips/Crompton/Surya Each Excess(+) Full Conversion INR

All as per Sl. item No. 46.00 above but for of capacity 200 W. Each Excess(+) Full Conversion INR

S&F in repair of Street Light Timer switch with 24 Hour daily setting, protected with IP-53 box, 230 volt,50Hz AC,ON-AUTO-OFF on front panel, one segment of 15 Min with accuracy of +/- 5 mins,complete all as specified and directed.Make:- Legrand Cat Part No 4127 90/Schneider/Havells/C&S Each Excess(+) Full Conversion INR

S & F in repairs of Pole mounted Junction box with terminals of size 210 x 260 x 117 mm ,made of high quality thermoplastic polycarbonate, dust & jet water proof, chemical, acid corrision, impact IK-09, insulated & shock proof IP 66, grey RAL 7035 color with internaly embedded gasket (PUR) , along with cover and metric knockout all sides including back of the base must including terminals 4Nos including fixing arrangement with MS flat of size 40X4mm , nuts , bolt and washers and MCB SP 6-32 Amps 01 No including taking down old unsv complete all as specified and as directed. Make :Hensel Cat Part No CJB008PS/Cape Each Excess(+) Full Conversion INR

S&F in repairs of 6 KW single phase automatic strreet light control panel with and including Digital 24 Hour Timer switch for automatic operation on/ off street light as per set time through programmable 24 hrs switch , 32 A TP Power contactor, 40 A SPN MCB wall /floor moutable, IP 54 enclosure made out of CRCA sheet duly powder coated conforming to IS/IEC 61439 & 60529 in built short circuit protection ,Class H insulation,FRLS internal wiring,extended wide band coil and locking arrangement with padlock and panel lock including taking down old unsv complete all as specified and directed. Make : Havells Cat Part No IHXSS01060A or equivalent in L&T/ABB/Legrand/ Each Excess(+) Full Conversion INR

Supply and fixing of Nature Switch Smart Sensor based automatic street light Control Panel with suitable enough to take 3-Phase load of 12 KW with 03 Nos I/O MCBs of 32 Amps & 03 Nos contactors of 32 Amps & circuit wiring (copper) of 10 sqmm.The infrared sensing should be maintenance free in design and its operation should be based on Natural Light Lux level (Switching ON less than 60 Lux & switching off more than 10 Lux).The sensor along with suitable power contactors and I/O MCBs should be enclosed in a pole/wall mountable rust proof,electric shock proof,termite proof and FR grade thermoplastic enclosure (with HINGED LED) conforming to IP66 protection class 2 complete all as specified & as directed.Make :-- SWADEEP SUGAM 66 12kW3P or its equivalent in Legrand/Hensel/Havells Each Excess(+) Full Conversion INR

Dismantling and taking down old unserviceable LT busbar panel and Supply, installation, testing and commissioning of LT busbar Panel board not less than 0.5m x 0.6 m x0.50 m , outdoor cubical type factory made (CPRI approved) with canopy,double door , front & back both side openable type fixed with Hinges and locking arrangement with Aldrop latches , fabricated of CRCA sheet , inner sheet 2.0 mm thick hinged type door for individual MCCBs and outer door 3.15 mm thick,rubberised gasket, supported on 50x 50 x 6 mm angle iron and Tee section frame dust and vermin proof complete with aluminium bus bar 4 Nos, 400 Amps rated capacity mounted on porcelain insulators totally enclosed chamber for protection 3 phase 415 volt with suitable capacity aluminium bus bar / PVC insulated copper cable control wiring duly mounted on PCC foundation with suitable size of bolts, nuts & wahsers with danger notice plate. Panel board shall be powder coated and angle iron frame painted with black synthetic enamel paint over a coat of red oxide primer complete, connecting existing cables with suitable size glands and lugs to accommodate complete all as specified and directed. Each Excess(+) Full Conversion INR

Supply and fixing of circular LED post top lantern 40W ,230 volts white in color, AC outdoor type,pressure die cast aluminium body and opal PC cover with IP 66 protection and IK07 rating with minimum efficacy of 120lm/W including taking down old unsv complete all as specified and as directed. Make :- Crompton/Bajaj /Havells /Surya Each Excess(+) Full Conversion INR

All as per Sl. item No. 53.00 above but for of capacity 25 W Each Excess(+) Full Conversion INR

All as per Sl. item No. 53.00 above but for of capacity 15 W Each Excess(+) Full Conversion INR

M&L for servicing old solar street light fittings of 20/40W capacity including servicing of module cleaning,battery inspection,checking of distilled water in battery,inspection of electronic circuits,connection etc all as specified and as directed. Note:- Battery charging,disconnect, connection cost one time if battery discharge shall be included in the above quoted rates. Each Job Excess(+) Full Conversion INR

S&F in repairs metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in replacement Double door TPN DBs 4 Way, of powder coated DB's suitable for MCB's fitted with bus bar, neutral link, earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F VTPN DB,MCCB incomer,4 ways single Metal door ,IP-43 IK 08 in 250A rated copper bus bars,earth bar,neutral links, no. of module DPX 250+12 complete incl. blanking plates as required & fixed flush to wall and making good the disturbed surfaces including taking down complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F MCCB 4 pole 125 Amps breaking capacity 25 KA, Ics = 100% Icu including spreader link & taking down complete all as specified and directed. Each Excess(+) Full Conversion INR

M&L in replacements for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised iron strip of size 25X4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I complete all as specified and directed. Note :-No extra payment will be for the earthing strip of size 25X4 mm. Each Excess(+) Full Conversion INR

S&F Exhaust fan 200 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store. Each Excess(+) Full Conversion INR

S&F Exhaust fan 250 mm sweep, non metallic plastic body, AC single phase, 230 V, 50Hz with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed. Note: The quoted rate is including for taking down and depositing old fan to MES Store. Each Excess(+) Full Conversion INR

S&F Exhaust fan 300 mm sweep, made of steel body, AC single phase, 230 V, 50Hz, RPM 1400, with & including self closing louvres, nuts, screws, bolts of specified sizes, electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from ceiling rose to exhaust fan and writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole writing MES number in 2 cm height with synthetic enamel paint and cutting wall for making hole and making good the disturbed surface to match the existing surface complete all as specified and directed.Note: The quoted rate is including for taking down and depositing old fan to MES Store. Each Excess(+) Full Conversion INR

S&F in replacement Recessed Mounted Square (2'x2') LED Panel light 36 watt with CRCA powder coated housing & high transmittance Opal diffuser for glare free with Electronic LED Driver. IP20, PF =0.95, System Lumens =120 lm/W, 5700k CRI = 80, Operating Voltage range 140 V - 270 V.complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in replacement Recess Mounted Round LED Downlighter 9 watt having slim edge with die cast aluminium housing finished in premium white powder coating & PC Opal diffuser with integral Electronic LED Driver. IP20, PF =0.95, total System Lumens Efficiency not less than 110 lm/W and color temp 5700k CRI = 80, Operating Voltage range 140 V - 270 V. complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in replacement Recess Mounted Round LED Downlighter 15 watt having slim edge with die cast aluminium housing finished in premium white powder coating & PC Opal diffuser with integral Electronic LED Driver. IP20, PF =0.95, total System Lumens Efficiency not less than 110 lm/W and color temp 5700k CRI = 80, Operating Voltage range 140 V - 270 V. complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in replacement Recess Mounted Round LED Downlighter 18 watt having slim edge with die cast aluminium housing finished in premium white powder coating & PC Opal diffuser with integral Electronic LED Driver. IP20, PF =0.95, total System Lumens Efficiency not less than 110 lm/W and color temp 5700k CRI = 80, Operating Voltage range 140 V - 270 V. complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs of LED Top post lantern IP-65 Energy saving environement friendly with high power LED as light source with opal cover diffuser soothing illumination of capacity 25 watt, 230 volt AC complete all as specified and directed. Each Excess(+) Full Conversion INR

S&F in repairs of LED bollard light fitting IP-65 designed as aluminium landscape for diffused lighting of capacity 8 Watt, 230 Volt AC complete all as specified & as directed. Make :- HAVELLS CONE LED BOLLAR / PHILIPS / BAJAJ Each Excess(+) Full Conversion INR

S&F in repairs of LED bollard light fitting IP-65 designed as aluminium landscape for diffused lighting of capacity 10 Watt,230 Volt AC complete all as specified & as directed. Each Excess(+) Full Conversion INR

S & F in repairs LED Bulk Head fitting 10 watt with Injection molded polycarbonate housing IP66, IK10, 3.5kV inbuilt surge protection, PF =0.95, total System Lumens not less than 1100 lm, 6500k CRI = 80, Operating Voltage range 140 V - 270 V. complete all as specified and as directed. Each Excess(+) Full Conversion INR

S & F in repairs Surface and wall mounted LED batten 10 watt 2ft long with Aluminum extruded housing , high quality polycarbonate diffuser & integrated Electronic Driver with IP20, PF 0.90, Efficiency not less than 110 lm/W color temp 6500k CRI = 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. Each Excess(+) Full Conversion INR

S & F in repairs Surface and wall mounted LED batten 20 watt 4ft long with Aluminum extruded housing , high quality polycarbonate diffuser & integrated Electronic Driver with IP20, PF 0.90, Efficiency not less than 110 lm/W color temp 6500k CRI = 80, Operating Voltage range 140 V - 270 V complete all as specified and as directed. Each Excess(+) Full Conversion INR

M&L for Weather proof flat three core PVC insulated and PVC sheathed industrial round 3 core flexible copper cable of size 2.5 Sqmm 1100 volts grade for connection of lights to Pole Box, after dismantling old one complete as specified and directed. Rm Excess(+) Full Conversion INR

M&L for PVC conduit 15mm dia fixing to pole from JB to security light complete incl fixing arrangement to pole with the help of 03 pairs of clamps and nut bolts including taking down old unsv complete all as specified and directed. Rm Excess(+) Full Conversion INR

M&L for sand coushioning to UG cables (8cm deep before laying of cables and 15 cm over the cable) including spreading, levelling, well ramming in layers complete all as specified and directed. NOTE :- punned thickness of 18cm only will be considered for measurement and payment. Cum Excess(+) Full Conversion INR

M&L for brick protection cover of size 230 x 115 x 75mm to LT underground cables with sub class ‘B’ over brunt brick, (Locally available best quality), laid dry and flat abutting each other with gaps not exceeding 10mm complete all as specified and directed. Per 1000 No Excess(+) Full Conversion INR

Boring/Drilling (horizontally) manually under 2m deep in soil below existing road suitable for passing GI tubing of 40 to 80 mm bore complete all as specified and directed. RM Excess(+) Full Conversion INR

Supply and fixing of GI tubing light grade 40mm dia for protection of cable on pole , under road crossing or across drain , along electric pole or floor / wall including taking down old unsv complete all as specified and directed. RM Excess(+) Full Conversion INR

Supply, laying testing and commissoning in replacements of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 10 sqmm 4 core including taking down old unsv complete all as specified and directed. RM Excess(+) Full Conversion INR

Supply, laying testing and commissoning in replacements of cable XLPE insulated screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) LT Cable with stranded aluminium conductor 1100 volts grade of size 16 sqmm 4 core including taking down old unsv complete all as specified and directed. RM Excess(+) Full Conversion INR

S & F in repair with for PVC rectangular block for mounting switches, sockets, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white), fixed in repairs complete of 100mm x 100mm x 50mm size complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repair with for PVC rectangular block for mounting switches, sockets, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white), fixed in repairs complete of 175mm x 100mm x 50mm size complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repair with for PVC rectangular block for mounting switches, sockets, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white), fixed in repairs complete of 200mm x 150mm x 50mm size complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repair with for PVC rectangular block for mounting switches, sockets, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white), fixed in repairs complete of 250mm x 200mm x 50mm size complete all as specified and directed. Each Excess(+) Full Conversion INR

S & F in repair with for PVC rectangular block for mounting switches, sockets, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white), fixed in repairs complete of 350mm x 300mm x 50mm size complete all as specified and directed. Each Excess(+) Full Conversion INR

Taking down old unsv and supply,installation & fixing of Smart integrated solar street light fitting of capacity 40 Watt & 6000 Lumens All in One Solar Hybrid type (To work with both AC & DC both) having Set polycrystalline solar cell complete with detailed technical specifications as prescribed below:- (a) System Wattage: Should not be more than 40Watts (+/-5%). (b) System Lumen Output: Should not be less than 6000 Lumen. (c) System Efficacy: Should not be less than 180 Lumens/Watt. (d) Battery Chemistry: Lithium Ferro Phosphate (LiFePO4) battery with life cycle of 2000 cycles should be used. (e) Battery Capacity: 25.6V & 24AH (f) Charging Electronics: Integrated MPPT charger with driver. (g) Charger Efficiency: >90% & Driver Efficiency: >90% Each set Excess(+) Full Conversion INR

(h) LED Burning Hours: Should be >50000 Hrs.@L70/ (j) IP Rating:IP65 & Ik for lens IK08 (k) Housing: Extruaion aluminium housing & Panel size 120wp (l) CCT (Color Temperature): 5700K (+/-5%) & CRI: >70 (+/- 5%) (m) Luminaire should have in-built PIR sensor. (n) Charging & Discharging LED Indicator: Should be provided in luminaire. (o) Input Voltage: 12 V DC adjusttable tilt angle(Deg.) 0- 15 deg. (p)Operating Temp Range for Light Engine: 0 to +45 Deg. C and Oparating Humidity up to 95%. and Insulation : Class III (q) Auto on/off by sensing dusk to dwn with the help PV panel & Open Circuit protection short ccircuit protection and reverse polarity Provided . (r) Manufacturer should provide LM79/ LM80 reports corresponding to the luminaire/ LED chip along with Type Test Certificate. Warranty - 3-years warranty against manufacturing defects from date of supply. Luminaire. Make: Philips BRP111 LED86/ 757 G2 Solar/Havells/Surya/CG

Supply & installation of GI Pole for mounting Solar street Lights with height of min 6 mtrs (76 mm X 60 mm),module mounting structure, luminaire bracket with corrosion resistant metallic frame & structure must be fixed on the pole to hold the SPV module with grounding facility (Corrosion resistance) & 3mm thickness with PV module holder etc.The frame structure must have provision to adjust its angle of 3 inclination to the horizontal between 0 and 45, so that the module can be oriented at the specified tilt angle.Note:- Cost of Excavation,Earth work & PCC shall be deemed to be included in the above quoted Rate. Each Excess(+) Full Conversion INR

Supply,install, testing and commissioning out door type Street light LT Control Panel of suitable size, CPRI type tested, factory fabricated totally enclosed, with suitable neoprene rubber gasket to make it completely dust and vermin proof, degree of protection not less than IP 55, conforming to IS : 60947 : 2004 double leaf shutter in front and single leaf shutter in rear side. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation and copper busbar wrapped with PVC tape/sleeves and maintained the colour code and copper strip busbar as per MCCB amps rated to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar. Panel shall be fabricated with 3.15 mm thick CRCA sheet and pass through 11 tank process (certificate will be provided by the manufacturer) duly pre-treated & powder coated, framing with MS angle iron 25 x 25 x 5mm duly pre-treated and powder coated paint over exposed external & internal surfaces having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected, and suitable for 415 volts, 50 Hz, 3 phase 4 wire system including complete internal wiring with 2.5 sqmm copper wire and connections. The bottom of the outer shell shall be contained with detachable plate having provision for entry of armored cable of adequate size with glands. Inner shell shall be compartmentalized for each control gear. Each Excess(+) Full Conversion INR

Provision of two Nos threaded earthing stud at bottom and lifting lugs of suitable size at top to lift the panel safely shall be made and comprising with and including following accessories and mounted on PCC (1:3:6) type C-2 foundation of suitable size and depth (min 30 cm below ground level & min 30 cm above ground level) including necessary excavation and earth work complete all as specified and as directed with and including the following accessories.:-(Street Light Panel) including taking out old Panel. BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos tinned copper 40 A rated, duly insulated with 1100 V grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections form main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry/exit shall be provided in the bottom for both incomming & out-going cables. INCOMING (i) MCCB FP, 25 Amps rating, Ics=100%Icu, 16 kA breaking capacity, adjustable thermal magnetic release - 01 No OUTGOING/INSTRUMENTATION SYSTEM : (ii) MCB TPN 16 Amps rating, 10 kA breaking capacity,'C' curve, ISI marked - 03 Nos ( 01 No Spare) (iii) Analog time switch, Programmed via captive segment. Power supply: 230 V~ 50/60 Hz, 3-Position override switch "ON-AUTO-OFF" on front panel. 16 Amp with 100 Hr working resurve - 01 No (iv) ML-2 Power Contactor, 415 Volt, 3 Pole, Conforming to IS/IEC 60947-4-1 & IEC 60947-4-1, Standard Coil Voltage 240V, rating 32/40 Amps - 01 No (v) Digital voltmeter with inbuilt selector switch, 3 phase, Accuracy Class-1.0, Flush mounting 96 x 96 mm, Input Voltage measurement range 50 - 520 Volts AC (P-P) - 01 No. (vi) Digital Ammeter with inbuilt selector switch and CT coil with suitable ratio, 3 phase, Accuracy Class-1.0 ,Flush mounting 96 x 96 mm, 4 digit , for 0-16 Amps - 1 No. (vii) Indicator lamp with LED (red, yellow & blue), Set of Three - 01 Set.

S&F in repair of 3 Pole power contactor with AC3 rating of 22 Amps and AC1 rating of 40 Amps with inbuilt auxiliary contacts 1NO+1NC complete all as specified and directed. Each Excess(+) Full Conversion INR

Total in Figures

Quoted Rate in Figures Select

Please Enable Macros to View BoQ information