Construction of Aspirational Toilets in different zones under Municipal Corporation Gurugram

Amount

Making nosing/ Moulding on edges of granite marble wherever required as per satisfaction of the EIC (NSI I

`Providing and fixing C.P. brass bib cock of approved make quality conforming to IS 8931, Prismatic 15 mm nominal bore

`Providing and fixing C.P. brass ant.ular stop cock` 15mm nominal bore

`Providing and fixing C.P. brass auto closing concealed urinal press matic taps`

Providing and fixing water meter cover made out of MS angle frame 25mmx25mmx shutter 20mmx20mmx5mm MS sheet 18 gauge with locking arrangement primer painting complete in all

`Providing and fixing in position best Indian make ISI marked 15 MM C.P. brass extension nipples including the cost of CP flange complete in all respect. (NSI I`

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C.`

`Providing and fixing Indian make hand dryer including the cost of gutties, screws, Electric wire, 3 pin top 5 amp Complete in all respects. I NSI)`

Providing and fixing small PVC dust bins with Lid of superior quality in ladies and gents toilet complete in all respects as per satisfaction of E.I.C

Napkin Vending Machine, Incinerator, Battery and Happy Days Pad complete in all respects.

Supplying and fixing following modular switch/ socket on the existing modular plate and switch box including connections but excluding modular plate etc. as required. (1.24) 15/16 A switch

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board consumer unit 240 volts, on surface/recess, complete with timed copper bus bar neutral bus bar, earth bus bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, interconnections, phosphatized and powder painted including earthling etc. as required (But without MCB/ RCCB/ Isolator) 2 plus 4 wax

Making suitable size wall niche minimum 2`-0`x 3`-0` including cement plastering from inside of niche, wooden plank for sheet metal, iron clad switch gear including the cost of PVC shutter with locking arrangement, Chowkhats complete in all respects

Providing and fixing 50 Watt LED flood light with bracket outside on the wall complete in all respects

Providing and fixing ceiling fan 48` including the cost of concealed box with hook complete in all respects.

Providing and fixing of shoes polish machine of reputed make

providing and fixing LED tube light 4 x 1 x 40 watt type including connections, wire complete in all respect

`Providing and fixing Sanitary Napkin and Facemask Incineration Machine 50 peieces/day `

Providing and painting of apex outside the toilet

Providing and Placing PVC POT (Gamla) size 18`, 12` Dia Green in Colour including decorative plant

`SITC of Feedback mechanism in Toilet`

Informatory sign board 600x600 rectangular as per IRC 67- 2012 with retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 fixed over 3 mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size .45x0.45x0.75rn for vertical post complete as per dause 801 of MORTandH specifications. Supplier shall provide a warranty as per clause 6.9 of IRC 67-2012 for retro reflective sheeting anda certified copy Using retro reflective Sheeting Class C as per IRC

`Providing and fixing to the inlet mouth of rain water pipe PTMT (an 82.00 Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 c`ms. Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type 83.00 A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. t9.571`

110 mm diameter and for connection

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum 84.00 distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than

roviding and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from 85.00 wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 kms

Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm 86.01 from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 Amis

Providing and Installation of Rainwater Harvesting System complete in all respects i/c 1000 ltr tank, CPVC connections pipes from RWH Tank to Overhead Tank with fixtures and ball valves, 100 mm: inlet pipe with filter and their connections, SITC of Submersible Pump Set of 0.5 HP etc. as per the directions/satisfaction of Engineer

Stainless Steel Sign Board for identification of Toilet Units as per the satisfaction of Engineer-

Providing and Installation the ISI marked (Capacity 02 Kg each) ABC Type Fire Extinguishers complete in all respects as per the satisfaction of

T-Base for Overhead water tanks

Cleaning Equipments and Consumables

Seater Stainless Steel Waiting Chair

Supply, Installation, Testing and Commissioning of 1KW Solar System complete in all respects

Preparation of plastered surface for oil bound distemper

Bidder Name

Amount

PRP INFRACONE (GSTN-NA) BID ID -1225124

M/s Deshraj Projects Limited (GSTN-NA) BID ID -1229113

LAKHAN INFRA CONSTRUCTIONS PVT LTD (GSTN-NA) BID ID -1228039

LAKHAN INFRA CONSTRUCTIONS PVT LTD (BID ID -1228039)

PRP INFRACONE (BID ID -1225124)

PRP INFRACONE (BID ID -1225124)

LAKHAN INFRA CONSTRUCTIONS PVT LTD (BID ID -1228039)