CA NO GE(H)-36/2023-24 SPECIAL REPAIR TO BUILDING NO P-226 AND P-227 IN THE AOR OF AGE B/R-II UNDER GE HISAR AT HISAR MIL STN

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of oil bound distemper of approved shade/tint over a coat of primer on walls including 2mm thick wall care putty all as specified & as directed

M&L rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

Material and labour preparation of newly plastered/asbestos cement surfaces of ceilings & applying three coats of white wash complete all as specified.

M & L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement including mixed with and including liquid water proofing compound @200 ML per 50 KG by weight of cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises

M&L for PCC 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in levelling course 25mm thick finished fair & even complete all as specified & as directed.

M&L for non skid ceramic jointless tiles (coloured) 1st quality, 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for glazed ceramic designer & pattern (dark & light shade) jointfree tiles (coloured) premium quality, 450mm x 300mm x 7mm thick, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.

M&L for vitrified ceramic tiles premium quality, 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.72 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

M&L for 16-18mm thick Granite (of any type) tiles machine cut, as in steps, jambs, cooking plateforms and the like, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid over & including 20mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

M&L for machine cut Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing laid over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) complete, all as directed.

Material and labour 75 mm thick PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for machine cut Kota stone slab flooring 18 to 20mm thick laid over & including screed bed or bedding layer of 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified. Note : - Kota stone shall be of size 550mm x 550mm (minimum) when brought at site.

Taking down chowkat or frame with shutters area not exc. 1.5 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified

Taking down chowkat or frame with shutters area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the wooden shutters from the frame) including cutting holes for hold fasts complete all as specified

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors, windows, ventilators and partitions (Fixed portions) including shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws including powder coated 'D' type handle of suitable size, tower bolt of suitable size, suitable size hinges heavy grade complete all as specified & as directed. Note :- Door closer, Glass panes/wire cloth/Particle board shall be measured & paid seperately under relevant item of BoQ.

Supply & fixing butt hinges of size 100mm medium weight, cold rolled stainless steel ISI marked complete all as specified.

S&F 150 mm long powder coated aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.

S&F extruded aluminium alloy handle, 150mm size, fabricated type, anodized (ISI marked) complete all as specified.

Supply and fixing brass mortice lock, vertical type, size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified. Make :- Godrej / Harrison / Link

S&F Door closer aluminium (extruded section body), hydraulically regulated, designation No. 2 universal type, suitable for door shutters of 851mm to 1000mm in width and of weight between 61 to 80 kg and fixed complete all as specified & as directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm (SIngle rebated) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Dismantling wooden boarding, any description, fixed in any position with nails all as directed.

M&L for hollow coloured / printed PVC wall panelling 5mm thick fixing to wall on PVC frame complete all as specified & as directed.

S&F GI powder coated snap grid of sizes 605 mm x 605 mm frame work for false ceiling with main tee 32 x 24 x 1mm thick, cross Tee 26 x 24 x 1mm and wall angle 24 x 24 x 1mm thick, flange covered with PVC thin includng hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including Gypsum board 9-10mm thick duly finished surface (thin PVC layer on gypsum board as per maunfacturer's instructions) of size 600mmx600mm thick and the same shall be placed in snap grid as in false ceiling complete all as specified & directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks, cooler stand and similar work including welding conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L for PCC 1:2:4 type B0, using 12.5mm graded crushed stone aggregate as in filling up chowkat hollows, hold fast, bed block and similar works as directed, complete, all as specified.

Supply and fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified.specified.

Supply and fixing 5mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, including hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore PTMT waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified.

Taking up or down 15/20 mm bore steel / composite / UPVC tubing and connection from any position concealed / exposed including cleaning for refixing or removal to store complete all as specified and directed .

S&F 20 mm bore steel water GI tube medium grade with all fittings / connections & MS clamps / clips and necessary screwing as required complete and fixed with or without concealed to walls, ceilings or laid in floors complete all as specified and directed

S&F CPVC pipes (outer dia of pipe 16mm) SDR 11 & Plain CPVC SDR 11 fittings laid on wall / ceiling or laying in floor complete all as specified with all fittings / connections and making good to required surfaces by using white cement / masonry works complete all as specified and directed. Note :- Rates quoted shall deemed to be included for making hole / nitch for replacement of pipe and making good distrubed surfaces to match with existing surface and finish all as directed.

S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, with PTMT 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor, complete all as specified.

S&F in repairs 15mm bore Stop valve fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S&F in repairs Bib taps,cast copper alloy with crutch or butterfly handle, chromium plated, fancy type , screwed for iron pipe or for brass ferrule, for 15 mm bore GI pipe complete all as specified and directed.

S&F in repair 15mm bore fancy type pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes & fly nuts, screwed for iron pipes all as specified and directed.

S&F as in repair 15mm bore stop valve,/ gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F as in repair 20mm bore stop valve, / gate valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions.

S&F in repair brass chromium plated overhead shower rose 125mm dia round shape with swivel joints complete all as specified and directed.

S&F in repairs, PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

S&F as in repairs tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges complete all as specified..

S&F in repairs 20mm bore stainless steel powder coated curtain rod with 02 Nos decorative ball type brackets (for each opening) and 02 Nos decorative side stoppers (for each opening) fixed on wall with PVC gutties & screws complete all as specified & as directed.

S&F in repairs single/ multi PVC (SWR) floor trap 75mm dia, plain with grating including joining to waste pipe, all as specified and directed

Dismantling and taking out existing old CI pipe including CI fittings/specials complete all as specified & as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls with necessary MS / PVC clamps and necessary screwing complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints / solvent cement joints fixed to walls with necessary clamps/ laid in floor complete all as specified.

Supply and fixing 110 mm bore PVC (SWR) bends any radius with access door complete all as specified.

Supply and fixing 75 mm bore PVC (SWR) bends any radius with access door complete all as specified.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal provided with access door complete all as specified and directed

Supply and fixing 110 mm bore PVC (SWR) vent cowl complete all as specified.

Demolition of brick/stone masonry built in cement/lime mortar of any mix and stacking serviceable stones aside for reuse & removing unserviceable materials in low laying area, complete, all as directed.

M&L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 complete all as specified.

M&L precast cement concrete (1:2:4 type B0 using 12.5mm graded stone aggregate) louvers and jallies, 25mm thick (measured solid), including all mouldings but excluding frame, set in CM 1:4 including taking down existing jalli all as specified & as directed.

Material and labour preparation of newly plastered cement surfaces on walls & applying three coats of white wash complete all as specified.

Dismantling old unserviceable PVC water tank capacity 250 ltr and not exc 500 ltrs & removal from site etc complete all as specified and directed.

Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

Dismantling old unserviceable PVC water tank capacity 500 ltr and not exc 1000 ltrs & removal from site etc complete all as specified and directed.

Supply and fixing 1000 Litre capacity Rotational moulded polyethylene water storage tanks (colour other than black as approved by Engineer-in-charge) triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I.

S&F in repairs Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed.

S&F in repairs 20mm bore PTMT nipple suitable for PVC tanks (minimum weight 45 gms) complete all as specified and as directed.

S&F in repair kitchen sink with drainage board (overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm or nearest higher size) ) made from high grade AISI-304 (18/8) stainless steel of 1mm thickness including 32mm bore brass CP waste coupling, plug, washer, 32mm bore and 600mm long PVC waste pipe including fixing cantilever brackets made of MS angle iron 30x30x3mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning of ends of brackets to errecting stand into wall and making good distrubed portion in CM (1:2) on in PCC (1:2:4) using 20mm graded stone aggregate and connecting union to pipe complete all as specified and directed.

S&F in repairs vitreous china wash down water closet (Padestal pattern) White, including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminium hinging device and fixing with all joints including connection to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc complete all as specified and as directed.

Dismantling wooden shutter & shelf boarding, any description, fixed in any position with nails all as directed.

S&F decorative 18mm thick factory made 100% soild rigid PVC (Poly Vinyl Chloride) foam sheet prelam colour to form KITCHEN CABINET having density of 600 Kg/Cum, manufactuered by an ISO 9001-2015 Certified Company, Termite proof, water proof and flame retardant PVC sheet, manufactured by single layer extrusion process, for one side laminated solid PVC foam sheet PVC film laminate should be pasted on PVC sheet, with suitable SS continious hinge, decorative SS handle, magnet for receiving door shutter, adhesive and of approved shade, manufacturer embossing, bar code and hologram on door, test certificate and autghorized letter complete all as specified and directed. Note: (i) Work will be complitated as per sample made in Complaint cell Bana Singh Vihar

S&F decorative 18mm thick factory made 100% soild rigid PVC (Poly Vinyl Chloride) foam sheet prelam colour having density of 600 Kg/Cum, manufactuered by an ISO 9001-2015 Certified Company, Termite proof, water proof and flame retardant PVC sheet, manufactured by single layer extrusion process, for one side laminated solid PVC foam sheet PVC film laminate should be pasted on PVC sheet, with suitable SS hinge, 100mm long decorative SS handle, magnet for receiving door shutter, adhesive and of approved shade, manufacturer embossing, bar code and hologram on door, test certificate and autghorized letter complete all as specified and directed. Note: (i) Work will be complitated as per sample made in Complaint cell Bana Singh Vihar

S&F in repairs stainless steel kitchen plate rack (overall size 31x24x10 inch) fixed with suitable size of screws etc complete all as specified and directed. Make - Cat Part No P-310 of Prayag /Blue Star / Nirali

S&F in repairs corner glass shelf with bracket complete all as specified and directed. Make - Prayag

S&F in repairs 15mm bore angle valve, cp complete all as specified and directed.

S&F in repairs 15mm bore, fancy type brass CP Wall Mixer 3-in-1 with 115 mm Long Bend Pipe for connection to Overhead Shower (with Bush & Piston Diverter Fitting) with Aerator complete all as specified and as directed. Make - Cat Part No MQT-519KN of ESSCO Jaquar

S&F in repairs 15mm bore, fancy type brass CP central hole basin mixer with U shape round casted spout with 450mm long braided hoses complete all as specified and as directed. Make - Cat Part No TQT-516A of ESSCO Jaquar

S&F in repairs CP sink mixer with swinging casted spout with Aerator complete all as specified and as directed. Make - Cat Part No MQT-521KN of ESSCO Jaquar

S&F in repairs Peg set of 06, steel chromium plated complete all as specified and as directed.

S&F in repairs Bathroom mirror Cabinet of size 450mmx350mm, fixed on wall with suitable size screws with PVC gutties by drilling complete all as specified and directed.

S&F in repairs fancy type brass CP Toilet paper holder confirming to cat No. BA-18 of prayag complete all as specified and as directed.

M&L for preparing new plastered or unplastered surface of walls with 1mm thick wall care putty and a coat of primer and applying two coats of weather proof paint of approved shade/tint complete all as specified & as directed.

M&L for complete removal of existing treatment on walls (any numbers of layers) by scrapping with steel wire brushing or any other means, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots. etc and including filling cracks or holes with 1mm thick wall care putty and a coat of primer and applying two coats of weather proof paint of approved shade/tint complete all as specified & as directed.

M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in Fosroc / Thermax as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete substrate in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortar as per the technical specifications and manufacturer's instructions complete all as specified and directed.

Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using Product : Rustoff-100 of Sika or equivalent make in Fosroc / Thermax as approved by GE, with density : 1.01 Kg/ltr at 30°C and consumption : 0.2 kg/Sqm/coat complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar

Supply and apply cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats and product requirements: carbonation resistance : 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in Fosroc / Thermax as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N/Sqmm according to ASTM C 882-78 complete all as specified and directed. Note : The material to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar

M&L for cutting V groove (15mmx10mm) along the crack line and cleaning the same with high pressure water jet and sealing with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents using Sikadur 31 of Sika or equivalent make in Fosroc / Thermax as approved by GE as per the technical specifications and manufacturer's instructions complete all as specified and directed

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15 cm thick, watered and rammed to a true surface all as directed.

M&L for 75mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.

M&L for factory made 60mm thick machine pressed precast cement concrete coloured interlocking paver blocks glossy finish of Grade M-35 conforming to IS 15658-2006 of shape and size as directed with grey cement and no pigment laid over & including 25mm thick sand cushioning, joints of blocks filled with dry sand and compacted with mechanical vibrator complete all as specified & directed.

M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. complete, all as directed.

Demolition of brick tiles or terracing tiles single layer on roofs complete all as specified.

Demolition of mud phuska in roof any thickness including plastering & leeping (whether full thickness removed or only part thereof) complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B0, using 12.5mm graded crushed stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges all as specified.

M&L for preparation of roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles with and including providing 50 mm average thick PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope complete all as specified and directed.

M&L for providing 10mm thick polymer modified plaster in ration 1:10 (1 Part of polymer and 10 parts of cement with solid contents not less than 20%) over slab and applying priming coat of epoxy primer with resin and hardner with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurathene liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm and applying 2nd coat solvent based polyurathene liquid mambrane not less than 500 micron thick UV stable having SRI value greater than liquid to 105 with consumption of 0.61 Kg/Sqm over dried 1st coat complete all as specified and directed. Make : Asian Paints / Pidilite / STP.

Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks, DB, MCB etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type modular pressed steel box covered with modular cover plate and frame for housing switches, sockets, fan regulators etc, complete, all as specified & directed. (Note :- (i) Switches, sockets etc shall be measured and paid for separately under appropriate items of BoQ' ).'(ii) cost of modular steel sunk box, cover plate and frame, cutting/chasing of wall/floor if required will be paid in this item and nothing extra will be paid on this account.

All as per item No 102.00 (here-in-before) but ceiling fan /exhaust fan point controlled by one Number one way switch.

All as per item No. 102.00 (here-in-before) but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board

All as per item No. 102.00 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.

All as per serial item No. 102.00 (here-in-before) but for one bell/buzzer point controlled by one bell push.

All as per serial item No. 102.00 (here-in-before) but for One Light point controlled by two, two way switches.

All as per srl item No. 102.00 (here-in-before) but for 15 Amp socket out let by using 2.50 Sqmm PVC insulated unsheathed copper conductor cable FRLS multi stranded on independent board including provn of 2.50 Sqmm unsheathed, multistranded copper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs modular type switch 1 way 6Amp, 230Volts 1 modle complete all as specified and directed

Supply and fixing in repairs modular type switch 1 way 16Amp, 230Volts 2 modle complete all as specified and directed

Supply and fixing in repairs modular type switch 2 way 6amp, 230Volts 1 modle complete all as specified and directed

Supply and fixing in repairs modular type bell push , 5 Amp 240 Volts.

Supply and fixing in repairs modular type socket 6Amp - 5 pin combined 2 modle 230 volts AC complete all as specified and directed

Supply and fixing in repairs modular type socket 6Amp/16 Amp - 6 pin combined 2 modle 230 volts AC complete all as specified and directed

Supply and fixing in repairs modular type socket 25Amp - 3 pin combined 2 modle with modular type mini MCB DP of cap 25Amps C curve 230 volts including sunk type modular pressed steel box covered with modular cover plate and frame for housing switch, socket, modular, MCB DP etc complete all as specified and directed Note:- Cost of MCB, DP, MODULAR type socket , box, plate with frame is included in this item and Nothing will be paid extra on this account.

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 2.5 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 2.5 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. Note:- Two lengths of 2.5 Sqmm cable, one length of 2.5 Sqmm cable and one length of PVC conduit will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing. Note :- PCC chamber shall be constructed at least 1.5m away from the earth electrode and pipe for watering shall be provided in slanting manners.

Supply and fixing LED lights fitting 1x 20/22W, 220V,AC wall mounted LED batten with polycarbonate housing & integrated electronic driver with efficacy of 100lumen/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S&F LED light fitting mirror type with high out put diffuser, 2 Feet, 10 Watt Cap, 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing square 1x1 LED ceiling panel light minimum 20 watt capacity recessed mounting, with 100lm/w efficiency with wide voltage protection (170 watt to 320 watt) and surge protection 20 Kv complete as as specified and directecd.

Supply and fixing square 2x2 LED ceiling panel light minimum 30 watt capacity recessed mounting, with 100lm/w efficiency with wide voltage protection (170 watt to 320 watt) and surge protection 20 Kv complete as as specified and directecd.

Supply and fixing ceiling fans COPPER WINDING complete with blades, down rods, and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE and Five Star rated with brushless with direct current moter (BLDC) with remove complete.

Supply and fixing geyser of capacity 25 Ltrs and rated wattage 2KW having temperature range 25 degree celsius to 75 degree celsius with different temperature setting controlling unit working pressure 0.8 Mpa having 5 star energy rating complete with inlet and outlet connections etc all as directed and specified by Engg-in-Charge. Note: Cost of necessary clamps,nut,bolt, any other mounting arrangement is included in this item and nothing extra will be paid on this account

Supply & fixing and testing exhaust fan of 300mm sweep heavy duty, double ball bearing, 1400 RPM, suitable for SP 230 / 250 volt, 50 Hz AC supply complete with louver shutter including fixing / grouting of frame in wall complete with covers & connecting with & including 3 Nos 1.5 sqmm single core, PVC insulated but unsheathed FRLS 1100 volts grade cable with multi-stranded copper conductor from ceiling rose to fan complete.

Supply and fixing exhaust fan, made out of sturdy Engineering Plastic AC single phase, 230 Volts of size 250mm sweep with blades, frame and louvers complete all as specified and as directed by Engg-in-Charge.

M/L for cutting of hole in exhusting wall for opning for exhaust fan and making good to facings where required and pointing in cement mortar 1:3 to ends or edges complete all as specified and directed by Engineer-in-Charge.

Supply, fabricating, bending, welding and fixing in replacement of desert coller stand of size 0.75mtr x 0.75 mtr with two legs of size 01 mtr long made out of angle iron of size 30mm x 30mm x 3mm thick and two Nos. MS flat of size 30mm x 300 with and including grouting in the wall and provision of nuts, bolts and washers including painting with one coat of primer and two coats of syntetic enamel gray paint complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Payment shall be measured and paid as per actual weight of Mild steel material. The weight of paint shall not be considered when weighing the material. The rate of material and labour of one coat of primer and two coats of syntetic enamel gray paint is included in this item.

Supply , laying , jointing, testing and commissioning of size 35 sqmm 3.5 core LT underground cable , 1100 volts grade, XLPE insulated and PVC sheathed, strip armoured heavy duty with multistrand aluminium conductors IS-7098, laid in trenches /fixed on wall /floor /road /culverts /pole or encased in GI pipe complete all as specified. Note : Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately.

Excavation in trenches in soft/loose soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed.

Removing excavated material to distance n. exc 50m and depositing where directed at a level n. exc 1.5m above the starting point etc complete all as specified and as directed.

Supplying and laying DWC HDPE pipe of pressure rating 6 kgf/cm square of size 50 mm outer dia for cable protection as per IS 14930 laid in trenches/fixed to wall/pole/roof/laid in floor/hard standing including suitable size of clamps all as specified and directed by Engg-in-charge.

Demolition of path / cement concrete (un-reinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level.) & removing unserviceable materials in low laying area, complete, all as directed.

M&L for 150mm thick PCC 1:2:4 type B2 using 40mm graded crushed stone aggregate as in sub base as directed) all as specified and as directed.

S&F sheet metal enclosure distribution board TP&N, 4 way, double door, powder coated, protection class IP-43, suitable for mounting MCCB, up to cap 125Amps, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, and isolated neutral bar complete all as specified & directed.

S&F MCCB TPN, 63 Amps 415 Volts , type 'C' curve, 10 KA, IS-8828 marked fixing in DB complete all as specified & directed. Note :-Make of MCB shall be same of that DB.

S & F MCB SP, 63 Amps 240 Volts , 'C' curve, 10 KA, complete. Note :-Make of MCB shall be same of that DB.

S&F sheet metal enclosure distribution board SP&N, 12 way, double door, powder coated, protection class IP-42, suitable for mounting MCB, DBs confirming to IS-13032, IS-8632, BS-5484 with min 200 Amp rating copper bus bar, complete all as specified & directed.

S & F MCB SP, 6 to 32 Amps 240 Volts , 'C' curve, 10 KA, IS-8828 marked for fixing in DB complete all as specified & directed. . Note :-Make of MCB shall be same of that DB.

S & F MCB SPN, 63 Amps 240 Volts , 'C' curve, 10 KA, complete. Note :-Make of MCB shall be same of that DB.

S&F modular type Ceiling fan regulator electronic step type of suitable wattage(minimum 120 watt) and compatible for both BLDC and normal ceiling fan, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed

S&F modular type ceiling rose surface bakelite 65mm x 50mm, 3 terminals with back plate etc complete all as specified and directed.

S&F Bell ding dong type, AC, 230 Volts, single pole.

S&F Sub main wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 10 sqmm, 1100 votls grade drawing through and including concealed conduit 25 mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 10 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge including taking down old unserviceable submain wiring. Note:- Two lengths of 10 Sqmm cable, one length of 10 Sqmm cable and one length of PVC conduit will be measured as one length.

malik constructions

Shiva Constructin Co.

Balaji Construction Co.

moti construction company

Puja Traders

SHRI HARI BUILDERS

M/S D.N Choudhary

NAVIN KUMAR