Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.6 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹33.8 L+₹43,767.25 (1.31%)Rejected-Finance | L2 | Rejected-Finance Other than Lowest Bidder | |
| 3 | L3₹37.2 L+₹3.8 L (11.3%)Rejected-Finance | L3 | Rejected-Finance Other than Lowest Bidder | |
| 4 | L4₹43.5 L+₹10.1 L (30.1%)Rejected-Finance | L4 | Rejected-Finance Other than Lowest Bidder |
Tender Value
₹49.9 L
EMD Value
₹99,840
Closing Date
3 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Jalandhar Cantt
HQ CWE Nalwa Road Jalandhar Cantt PIN-144005
Please refer tender documents
2023_MES_601370_1
8323/11/E8
Open Tender
Civil Works
Item Rate
180 days
Jalandhar Cantt
Class D Category a(i) for contractors enlisted with MES
8 documents required · 8 mandatory
₹500
AGE (I) Suranussi
₹99,840
Yes
28 Jul 2023
6 Jun 2023
10 Jul 2023
6 Jun 2023
3 Jul 2023
21 Jun 2023
Amount
Demolition of brick work built in cement mortar including all quoins arches, pillars etc but including ashalr facing dressed stone work and precast concrete articles complete all as specified and as directed.
Demolition of cement conc (un reinf) in ground floor and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed.
Taking down cement or cement lime plaster of any description on brick or stone walls, etc incl raking out joints hacking for keys srubbing down with water etc complete all as specified and as directed.
Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area n.exc 1.50 Sqm each and removing from site complete all as specified and as directed.
Taking down chowkats or frames with Shutters ( without taking off the shutter from the frame ) of area exc 1.50 Sqm but n.exc 4.00 Sqm & removing from site complete all as specified and as directed.
Taking down shutters of any description exceeding 1sqm each and not exceeding 2.00 sqm each complete all as specified and as directed.
Taking down shutters of any description size exceeding 1 sqm and n.exc 2 sqm but refixing in the same opening complete all as specified and as directed.
M&L brick work , with sub class 'B' bricks built in cement mortar 1:6 straight or curved on plan exc 6mtr mean radius, using old size bricks complete all as specified.
Ditto all as per item No above bu texcept bricks.
M&L 15mm thick cement plastering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement complete all as specified.
M&L 15 mm thick cement plastering in cement mortar (1:4) of brick work or concrete surfaces with using water proofing compound finished even & smooth without using extra cement complete all as specified.
M&L for 5 mm th rendering in cement mortar in 1:3 on ceiling complete all as specified and as directed
Dismantling wall and Ceiling boards any thickness, including cover fillets complete all as specified and as directed.
M&L for 12mm th perforated particle board/tiles for insulation and accoustic purpose 60X60CM in size fixed in frame work /grid complete all as specified and as directed.
M&L 605mmX605mmsize anodised Aluminium snap grid frame work for false ceiling with aluminium angle 25X25X1.5mm th and Tee 25X35mmX1.5mm th and using 2mm GI wire adjustable as suspender in required length complete all as specified and as directed.
S & F 5 mm thick printed colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.
S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in roof covering completed specified and directed by engr-in-charge complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with J-type hook complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain sheet ,sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall ,fixed with J-type hook complete all as specified and as directed.
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering to Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and as directed.
M&L for 35 mm thick 2nd clas hard wood, factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated as specified in SSR Part I section 8 clause 8.2(a) complete all as specified and as directed.
M&L for 35mm th IInd class Hard Wood glazed /gauged shutters open rebated and prepared to receive glass /gauge etc without sash bars edges of framing plain or chamfered rounded fitted with cut and mitred beads for securing glass/gauge etc all as specified in SSR Part I section 8 clause 8.2(a) including helical Door spring complete all as specified and as directed.
S&F solid PVC door frame of size 50mmX 47mm made out of 5mm th plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.
S&F 30mm th factory made PVC door shutter solid panel consisting of frame made out of MS tubes for top & bottom rails .Ms frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colourPVC sheet for top rail , lock rail &bottom rail on either side & as gap insert for top rail & bottom rail . Panelling of plain of plain colur PVC sheet to be fitted in the MS frame welded/sealed to stiles & rails with suitable PVC sheet beading and joined together with solvent cement ,etc all as specified and shown on drawings complete all as specified and as directed.
S&F 40mm th flush shutter solid core construction with block board core and plywood face panels commercial face on both faces complete all as specified and as directed.
Supply & Fixing for steel windows 1.25 mm thick box type (primer coated) ERW hollow 'P' section of size 60mm x 25mm single rebate comprises of skeleton shutter ERW sec 50 x 20 mm & 1mm thick and openable leaf consisting two nos sash bar of T section 20x3mm complete welded to frame including cutting holes and making good dismanteled portion in cement concrete (1:2:4) type B-I four nos for each window including following fitting welded to shutter complete all as specified and as directed by Engineer-in-Charge :- (i) Hold fast 150mm long 12 mm x 3mm made to shape - 04 Nos each window. (ii) Handle of Z Section 20 x 25 mm, 100mm long 01 Nos each leaf. (iii) MS tower bolt 150 mm long-02 Nos each leaf. (iv) Z Section 20 x 25mm, 100 mm stopper - 01 Nos per leaf (v) Cleat 55 mm long of hollow square 15x20x63mm welded to hinges - 01 Nos per leaf. (vi) MS Box type hinges of size 75 X 12 mm - 02 Nos per leaf. (vii) MS Guard bars square 12mm dia @10 cm c/c with GI frame fixed to window frame. (viii) Fabrication and fixing Note : Wire gauge shall be measured and paid for separately.
Ditto all as per item No above but with Gauged shutter
M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar exc half brick but not exc one brick th all as specified.
M&L for PCC 1:3:6 type C-1 with 20 mm aggregate as in door frames for fixing holdfasts and making good to the entire satisfaction of the engineer in charge.
S&F 300mm size mild steel sliding door bolt plate type stove enamelled black with bright bolt not less than 12mm dia incl a minimum of six nut and bolts ,four on bolt plate and two on stapple plate complete all as specified
S&F mild steel barrel tower bolt 200mm size stove enamelled black with bright bolt etc all as specified
S&F 125 mm size mild steel pressed handle stove enamelled black and fixed complete all as specified and as directed by engineer-in-charge.
S&F 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and as directed by engineer-in-charge.
S&F floor door stopper aluminium alloy body and tounge 140mm anodised with hard drawn steel spring etc complete all as specified and as directed by engineer-in-charge.
S&F 300mm long mild steel ordinary rat rail rod pattern door spring including roller and roller plate complete all as specified and as directed by engineer-in-charge.
S&F Door closer hydraulically regulated, designation No. 3, universal type,aluminium extruded section suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
S&F 25 mm th Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame workcomplete all as specified and as directed by engineer-in-charge.
S & F 1 mm thick Mild steel, plain, black sheet in wall cladding, steel gates and cup board with all locking arrangement similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required.
S & F reflective HIP cautionary circular sign board of size 600 mm made of ACP sheet 3 mm thick supported over 25x25x3 mm MS angle iron frame powder coated with hold fast.front side of the sign board fully reflective with high intensity reflective sheet base letter ,sign and border duty computer cut.sign board supported over single leg of 47 mm MS square pipe of 3 mtr long duly painted black and white incl exc in post holes each n.exc 0.50 cum and removing surplus soil n .exc 50m and making good surface in loose/soft soil filling with cement concrete type B1 1:2:4 (40 mm graded agg ) as in foundation filling and mass concrete complete all as specified and as directed.
S&F galvanized mild steel wire cloth 0.56mm dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staple complete all as specified and as directed by engineer-in-charge.
S & F 12 mm size of Wire netting of stainless steel wire 0.71 mm mm dia fixed with tinned tacks of stainless steel wire staples.
S&F in 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane.
S&F in repair Vitreous china ware water closet Orissa pattern including connecting to trap and to flushing pipe anti Syphonage pipe etc complete , fixed as in repairs of size 580mm X 440mm complete all as specified. Make: Hindware / Cera / Parryware. complete all as specified and as directed.
S&F in repairs vitreous china water closet Padestal pattern( white ) includng trap but excluding fixing bolts, flushing cistern and flush pipe complete all as directed.
S&F in repairs PVC flushing cistern, 10 ltr capacity, valve less symphonic action type, low level, with intel, ball valve, float valve abd handle including brackets fixed in position, 32 mm dia PVC flush pipe and connection to water mains complete all as specified and directed by engineer-in-charge.
S&F in repairs vitreous china urinals Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with urinal spreader ,grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed.
S& F in repair vitrious china wash hand basin flat back 550X400mm incl fixing bracket, pvc waste coupling and waste pipe,cp pillar tap etc all as specified and directed by engineer-in-charge.
S&F in replacement 20 mm dia harrison rails mild steel with decorative finish , with fixing brackets , stops, rollers complete all as specified and as directed (two brackets per 1.5 M length and 08 Nos roller per 1.RM).
Dismantling brick tile or terracing tile single layer on roof complete all as specified and as directed by engineer-in-charge.
Demolition of mud in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed by engineer-in-charge.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by engineer-in-charge.
M&L for 50mm average consolidated thickness pcc 1:3:6 type C2 with using 20mm graded stone aggregate as in padding on flat roofs etc all as specified and directed.
Supply only Integral water proofing compound complete all as specified and as directed by engineer-in-charge.
M&L for Applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sqm over a coat of primer including cleaning surfaces complete all as specified and as directed by engineer-in-charge.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application complete all as specified and as directed by engineer-in-charge.
M&L for 40mm thick brick tiles laid on cement mortar bed ( 1:3) with WPC and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement and pointed in CM (1:3) complete all as specified and as directed by engineer-in-charge.
All as per item No above but except brick tiles.
M&L Providing, cement concrete type B2 (1:2:4) (using 20 mm aggregate), as in roof kerbs or mud stops, rounded or chamfered on edges parapets copings, bed plates, etc
Cutting grooves of size 75mm wide and 65mm deep in brick parapet wall for inserting APP membrane and making good the disturbed portion in CM (1:3)
Dismantling water tanks of any description exc 250 and n.exc 500 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.
Dismantling water tanks of any description exc 500 and n.exc 1000 ltr capacity and removing to store complete all as specified and as directed by engineer-in-charge.
S&F in repairs Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 500 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed.
S&F in repairs Rotational moulded polythene water storage tanks double layer (cylinder each vertical with closed top) of capacity 1000 Itrs, hoisted and fixed in position including pvc float valve 20mm size,specified in SSR Pt-1 Make : Sintex / Frontier / Polycon complete all as specified and as directed.
Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 250 & n exc 500 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge.
Cleaning and removing all scale and dirt, etc, from tanks of capacity Exc 500 & n exc 1000 Ltr and from mouths of circulating pipes, etc complete all as specified and directed by Engineer – in – Charge.
S&F in repairs HDPE PVC lid (cover) for 500 Ltrs capacity PVC tank complete all as specified (Make : Sintex/Rotex).
Taking down GI tubing and connections with all fittings 15 mm bore complete all as specified and as directed by engineer-in-charge.
Ditto all as per item No above but 20mm bore.
S&F in repairs 15 mm dia GI tubing , medium grade, and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.
S&F in repairs 20 mm dia GI tubing and connections fixed to wall or ceiling, laid in floor etc complete all as specified and as directed by engineer-in-charge.
S&F in repair PVC shower rose PTMT 15mm size fixed to iron pipe complete all as specified and as directed by engineer-in-charge.
S&F in repair pvc connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by engineer-in-charge.
S&F in repair 15mm size stop valves Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedPTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.
S&F in repair 20 mm size stop valves Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedPTMT high pressure screwed for iron pipe (make- Prayag) complete all as specified and as directed by engineer-in-charge.
S&F in repair 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs.
S&F in repair 40mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete fixed as in repairs.
S&F in repair 15 mm bore dia bib tap (long or short body) cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for union fancy type chromium plated concealed complete all as specified and as directed by engineer-in-charge.
S&F in repair 15 mm bore wall mounting brass CP mixer for hot and cold water screwed down for iron pipe etc complete all as specified and as directed by engineer-in-charge.
S&F in repair towel rail 600mm long of PTMT incl cp brass srews andwooden/plasticcleats (Minimum weight 190 gms) complete all as specified
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
S&F in repairs waste coupling of PTMT 32 mm dia half or full threaded for WHB all as specified and directed.
S&F waste coupling of PTMT 40 mm dia half or full threaded for Kitchen Sink all as specified and directed.
Dismantling mild steel work of any description not otherwise provided for complete all as specified
M&L preparing surfaces of new walls and applying two coats of oil bound distemper over a coat of primer complete all as specified
M&L preparing surfaces new of walls and applying two coats of cement base paint over a coat of primer complete all as specified incl preparation of surfaces.
M&L for three coats of white wash on newly plastered surface of ceiling incl preparation of surface complete all as specified incl preparation of surfaces complete all as specified
M&L for two coats synthetic enamel paint new wooden surface over 10 cm width or girth over a coat pink primer incl preparation of surfaces complete all as specified
M&L for two coats of synthetic enamel paint on new steel surface over 10cm width or girth over a coat red oxide primer incl preparation of surfaces complete all as specified
M&L for 75 mm th cement conc type C-2, 1:3:6 as in plinth protection with using 40mm graded stone aggregate etc all as specified.
M&L for 40mm th PCC 1:2:4 type B1 (using 20mm graded aggregate) as in flooring incl finishing the surface even and smooth with using extra cement
M&L 75 mm thick PCC type D 2 1:4:8 over well rammed earth with Glass/PVC dividing strip as in sub base.
M&L for PCC 1:5:10 type E2 using 40 mm graded stone aggregate as in filling in sunken floor etc all as specified and directed
supply only glass dividing strip 38mm wide and 3mm th inserted in position.
S&F in repair PVC SWR pipe 110 mm dia fixed to walls, single socketed in any length with rubber ring joints fixed to walls etc all as specified.
S&F in repair PVC SWR pipe 110 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified.
S&F in repair PVC SWR pipe 75mm dia fixed to walls, single socketed in any length with rubber ring joints fixed to walls etc all as specified.
S&F in repair PVC SWR pipe 75 mm dia laid in treanches , single socketed in any length with rubber ring joints fixed to walls etc all as specified.
S&F in repair 75mm size PVC (SWR) floor trap plain with grating incl to jointing with waste pipe with adhessive etc all as specified.
S&F in repairs 110mm dia PVC branch pieces single equal or un euqal.
S&F in repairs 75mm dia PVC branch pieces single equal or un euqal.
S&F in repairs 100 dia PTMT grating doom (min wt 25 gms) complete all as specified.
S&F in repairs 100 mm dia stack clamp made out of 25x4mm Flat iron etc all as specified.
S&f in repairs 75mm dia stack clamp made out of 25x4mm Flat iron etc all as specified.
S & F 2 mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. including dismantling and taking down old unserviceable PVC sheets completed all as specified.
Repair ,servicing and overhauling of rolling shutter gear operated type with chain wheel and hand chain of any size by oiling , greasing to gear box , guide channel , shaft , pully and minor repair to gear box, hood cover, pully etc and replacement of minor parts like spring ,pins, lathe etc and including securing guide channel to walls with PCC 1:2:4 type B1 and making gud the surfaces with CM (1:4) and making the rolling shutter functional to the entire satisfaction of the Engineer in charge all as specified and directed by Engineer-in Charge.
Hacking old broken glass of any size and desription from wooden frames
Ditto all as per item above but from steel frame
S&F in repair 3mm th sheet glass ordinary quality glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in Charge.
Ditto all as per tem No above but 3mm th pin head/ figuered glass.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rmoving servicable tiles to store and rubbish off the premises.
M&L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed or bedding layer in CM 1:4 all as specified and directed by Engineer-in Charge.
M&L 18-19 mm th machine cut kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing, over 20 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.
All as per item No 114 above but as in skirting over 10mm th rendering in CM 1:4 complete all as specified and directed by Engineer-in Charge.
M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match , over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.
M&L Non-skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over15 mm th screed or bedding layer in CM 1:6 complete all as specified and directed by Engineer-in Charge.
M&L for vitrified ceramic light shade tiles 10mm thick (sqare/rectangular ) polished, area of each tiles exc0.42 sqm but not exc 1.00 sqm in floor etc ,set and jointed in neat cement slurry and pointed in white or coloured cementto match etc all as specified over 15 mm th screed bed or bedding layer in CM (1:6) complete all as specified and directed by Engineer-in Charge.
M&L for glazed ceramic tiles coloured of size 300mmx200mm x 7mm th on vertical surfaces such as in skirting, dado etc over 10 mm th backing coat in cm 1:4 complete all as specified and directed by Engineer-in Charge.
Form work to soffits of suspended slab such as roof slab/Kitchen slab n exc 200mm thick (horizontal/sloping/vertical) with fair finished surface complete all as specified.
M & L TMT bars 6mm to 8mm dia. cut to length bent to shape required including cranking, bending and binding with and including ms wire (annealed) n. less than 0.9mm dia or securing with clips complete all as specified
Demolition of cement concrete is reinforced of any description and in any position not otherwise specifically provided for as specified and directed by Engineer - in - Charge .
M&L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in slabs supported on walls, beams, columns deck slabs and in shelves, the like all as specified and directed by Engineer - in - Charge .
M & L Reinforced cement concrete (nominal mix) Type B-0 1:2:4 (12.5mm graded aggregate) in Chajjas all as specified and directed by Engineer - in - Charge
M & L for 3.2/3.3 mm thick Linoleum, plain coloured, laid dry in floors, linoleum is sealed down with an approved adhesiveincluding stretching, cutting and fitting complete all as specified and directed by Engineer-in Charge.
S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers, waste pipe and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified.
All as per item No above but without drainage board and over all size 495mm x 420mm, bowl size 410mm x 330mm x 160mm complete all as specified.
Supply & fixed sliding/opening anodised aluminum door/window shutters including frame,and made out of hollow extruded alumimum sections as mentioned below. Each door having 02 Nos D type handles, 02 Nos aluminium tower bolts 300 mm size, hydraulic door spring. Shutter to be partly glazed with 5mm thick, plain or tinted glass and partly paneled with 12 mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket, anodized aluminum beading, screws including bothside openable in door bottom hydraulic double action machine machine complete all as per specified and directed. Chowkat / frame 101.60 x 44.45 x 1.60 mm thick Shutter top and bottom rail : 114.30 x 44.45 x 1.55 mm thick, Shutter middle rail 83.50 x 44.45 x 1.55mm, Shutter verticle style : 85 x 44.45 x 1.55 mm thick.
S & F 28 mm width of Aluminium dividing strips, 1.5mm thick, inserted in position, conform to design.
DUGGAL CONSTRUCTION CO
AAY KAY Constructions
M/S RAJESH CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .