GE 861 EWS-37/2024-25

Amount

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

M&L for PCC type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete M-25 (Design Mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete M-25 (Design Mix) as in Chajjas complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete M-25 (Design Mix) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engineer-in-Charge.

M&L for flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and surface rough finished complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) and surface rough finished complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. and surface rough finished complete all as specified and directed by Engineer-in-Charge.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

S&F Mild steel TMT bars 6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

M&L for Precast cement concrete hollow block type (1:3:6) (using 16mm graded crushed stone aggregate) masonry exc. 10 cm in width and setting in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

M&L for Providing precast cement concrete solid building blocks (1:3:6) Type C1 (using 20mm graded crushed stone aggregate) or slabs 10cm thick (with plain or interlocking joints as directed) setting in cement mortar (1:6), complete, in walls complete all as specified and directed by Engineer-in-Charge.

M&L for 40mm thick PCC (1:2:4) type B0 (Using 12.5mm graded crushed stone aggregate) as in Damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed by Engineer-in-Charge.

M&L for Hard core of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick PCC type D2 (1:4:8) (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-Charge.

M&L for 75 mm thick PCC type C2 (1:3:6) (using 40mm graded crushed stone aggregate) as in plinth protection surface should be even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick joint free area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge.

M&L for Coloured Glazed ceramic tiles joint free in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering of cement mortar (1:4) complete all as specified and directed by Engineer-In-Charge.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces of wall with cement mortar 1:6 finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-In-Charge.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces of wall with cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-In-Charge.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces of ceiling with cement mortar 1:3 finished even and smooth (without using extra cement) complete all as specified and directed by Engineer-In-Charge.

M&L including preparation of newly plastered surfaces of wall and applying with three coats of white wash complete all as specified and directed by Engineer-in-Charge.

M&L including preparation of newly plastered surfaces of wall and applying with two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.

M&L including preparation of newly plastered surfaces of ceiling with and applying three coats white wash complete all as specified and directed by Engineer-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engineer-in-Charge.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed by engineer-in-charge.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and directed by engineer-in-charge.

S&F Pressed steel frames for doors of size (105x60mm) with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed by engineer-in-charge.

M&L for plain cement concrete (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) as in filling of hollow portion of pressed steel door frame complete all as specified and directed by engineer-in-charge.

S&F 35mm thick 2nd class hard wood rail & style framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated specified as specified and directed by engineer-in-charge.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing as specified and directed by engineer-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing as specified and directed by engineer-in-charge.

S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed by engineer-in-charge.

S&F 200mm long Aluminium anodised, barrel tower bolts of extruded section and fixed as specified and directed by engineer-in-charge.

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed as specified and directed by engineer-in-charge.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed as specified and directed by engineer-in-charge.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed as specified and directed by engineer-in-charge.

S&F 100mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 as specified and directed by engineer-in-charge.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised as specified and directed by engineer-in-charge.

M&L for preparation of newly steel surface of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel (ordinary tint ) (each coat) over a coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-In-Charge.

M&L including preparation of newly wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer-In-Charge.

S&F 15mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered white in colour hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm dia Bib taps, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm dia fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 15mm dia fancy type Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions type, chromium plated with long shank and cup (concealed type) complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by Engineer-in-Charge.

S&F 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and as directed by Engineer-in-Charge.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by Engineer-in-Charge.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC (SWR) 'P’ trap complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm PVC (SWR) WC connector bent type complete all as specified and as directed by Engineer-in-Charge.

M&L for 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed by Engineer-in-Charge.

S&F 10 litre capacity PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed by Engineer-in-Charge.

S&F Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including brackets complete all as specified and as directed by Engineer-in-Charge.

M&L for second class hard wood timber plan fillet, square, rectangular or triangular in section, clean sawn, secured with nails or brands, sectional area exc 13 sqcm & n exc 25 sqcm complete all as specified.

M&L for second class hard wood timber plan fillet, square, rectangular or triangular in section, clean sawn, secured with nails or brands, sectional area exc 6 sqcm & n exc 13 sqcm complete all as specified.

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face on one side fixed in ceiling, flat or sloping, with nails to timber frame work complete all as specified.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed by Engineer-in-Charge.

S&F looking mirror of plain glass 1200mm x 900mm x 4-6mm thick mounted on wall tilling with steel screws studs 04 Nos complete all as per direction of E-in-Charge. MAKE : "MODIGUARD"

M&L for 150mm bore Reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

M&L for Concrete bed to 150mm dia drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) complete all as specified and directed by Engineer-in-Charge.

M&L for precast reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and jointed in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.

Construction of Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 3.0 M effective depth complete all as specified and directed by Engineer-in-Charge.

Construction of LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for 20 users complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:3:6, Type C–1, using 20 mm graded stone aggregate as in coping including use and waste of form work and finishing the exposed faces of concrete even and smooth without using extra cement complete all as specified and as directed. by Engineer-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed by Engineer-in-Charge.

Add to item No 1 for each additional 1.5m or part thereof in depth beyond the first 1.5 m complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finish surface of concrete square, rectangular or polygonal complete all as specified and directed.

Brick work with sub class 'B' brick straight or curved on plain exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for preparation of newly plastered or unplastered surfaces and applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer complete all as specified and directed.

S&F 2nd class soft wood plain fillets exc 3 Sqcm n exc 6 Sqcm square, rectangular or triangular in section clean sawn secured with nails or brads complete all as specified and directed

M&L for PCC 40 mm thick type B1, 1 : 2 :4 using ( 20mm graded aggregate ) as in floor surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for structural mild steel work as in Stairs (framed) including stringers, treads, landing, balusters, hand rails etc including cleats brackets etc complete of Fe-410-W (Gde -E-250) Quality A complete complete all as specified and directed.

M&L for preparation of new steel surfaces of not exc 10cm in width or girth with two coat of synthetic enamel paint over coat of primer red oxide on angle iron complete all as specified and directed.

S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

M&L for Mild Steel works bands, straps, holdfasts and similar small articles conforming to Fe- 290 Gde 165 complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out and getting out in soft / loose soil complete all as specified and directed by Engineer-in-Charge.

M&L for 100 mm thick plain cement concrete (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in sub base of floor finished complete all as specified and directed by Engineer-in-Charge.

M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed by Engineer-in-Charge.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade with grey cement and pigment complete all as specified and as directed by Engineer-in-Charge.

M&L for Providing, cement concrete (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edge complete all as specified and directed by Engineer-In-Charge.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

Description All as per srl item No-96 here in above but for one 5A socket outlet on the same board controlled by one switch.

Description all as per item No-96 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm.

S&F in replacement switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal 240 volt complete all as specifeid and directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp flush type universal 240 volt complete all as specifeid and directed..

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed by Engineer -in- Charge.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed by Engr-in-Charge

Supply and fixing LED lamp 10 W all as specified and directed by Egnr-in-Charge.

S&F decorative ultra slim linear LED 20 Watt 4' long lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified & directed.

S&F LED Bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, SPN (single pole neutral), AC, 240 volts, B series capacity 32 Amps 10kA and making connections complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.

Supply and Fixing exhaust fan 300 mm sweep PVC body with louver, 240 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

Supply and installed water heater vertical type ,stationary storage type of 25 ltr capacity having S/S inner vessal, five star rating , ISI Marked close/vented type (star marked) , 240 volts with heating element and autocut thermostate, maximum output of hot water is 60 degree celcious, including fixing arrangement nut bolts, washer/fasteners and finishing work etc complete as per existing surface, all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe or binding with fencing/pole etc, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq mm nominal cross section 2 core solid conductor all as specified and directed by engr-in-charge.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer - in - Charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe or binding with fencing/pole etc, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 10 Sq mm nominal cross section 2 core solid conductor all as specified and directed by engr-in-charge.

M/S SHEIKH FEROOZ AHMAD (BID ID -3094109)

JANDOO AND CO (BID ID -3089974)

Peerzada And Sons (BID ID -3090427)