RENOVATION OF ROOM NO 62 AT NORTH CAMP AND OTHER MISC WORKS AND SPECIAL REPAIRS TO GI CI PIPES AT NORTH CAMP AT AF STN BAMRAULI

Amount

S&F Powder coated aluminium anodized of any colour coating (Thickness of powder coating shall not be less than 50 micron) partition frames including door with one or more rebates aluminium section (Weight shall not be less than 0.55 Kg/RM) including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading screw aluminium anodized including 9 mm thick pre-laminated particle board exterior grade pre-laminated on one side and other side balancing white in bottom panels and 5 mm thick tinted glass in top panels complete all as specified and directed.

Supply and fixing in position premium sand textured finished mineral fibre acoustical ceiling tiles of size 600x600x16mm thick and placed on GI grid powder coated snap grid ceiling, 600x600 module consisting of wall angle section 24x24 mm and tee section with web height of 38mm and flange 24mm (colour white) (having rotary stitching on all T-section) with suspension system as shown in drawing No CWE/BAM/TD-34 She 1/1 and as approved by the GE including taking down old false ceiling complete all as specified and directed. Notes :- (i) Ceiling tiles shall be of make Armstrong brand "DUNE RH99 (Bevelled / Triangular)" or equivalent brand (or) make as specified in list of makes to particular specifications. (ii) Thickness of GI section shall not be less than 3mm and shall be procured from the tile manufacturer. (iii) Section and hanging system shall have galvanizing of minimum 90 grams per square metre and of same make of tile.(iv) Work shall be executed by the manufacturer's authorized agency.(v) Old false ceiling shall be contractor property and necessary recovery shall be made as per rate specified in schedule of credit.

S&F PVC wall panelling in double layer sheet for panel & inner framework, PVC strips should have in their centre a grave of 6mm & 1mm depth for sinking the head of the screw used to fix the strips to the wall vertically at an equal interval between two PVC strip, PVC strips shall be fixed to the wall using steel screws through the groove in the PVC strip by using PVC fasteners panels are joined through solvent cement complete all as specified and directed. Make :- DECO India Cat Part No. 0039 (or) any techno commercially equivalent make M/s Rajshri Plastiwood Pvt Ltd/Sintex as approved by GE.

S&F 0.50 mm thick PVC colour papers self adhesive for fixing on wooden door/wooden cupboard matching with existing wall paneling shade complete all as specified and directed.

S&F Door closer, hydraulically regulated, designation No 3, aluminium (die cast) body, universal type suitable for door shutter of 851 to 1000mm in width and of weight between 61 to 80Kg complete all as specified and directed.

S&F of 18 mm thick Celuka PVC sheet minimum 600 Kg/Cum density grade 1 quality of both side plain white colour rigidiam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make cabinet sides, top, bottom and shelves inside the cabinet including locking arrangement and fittings complete [ Each cupboard having 04 Nos aluminium box hinges/piano hinges, Handle- 02 Nos, Hasp & staple - 01 No] etc as specified, manufacturer's instructions and as directed by Engineer-in-Charge. Make: M/s Rajshri Plastiwood Pvt Ltd/Sintex (or) any techno commercially equivalent make as approved by GE. Notes :- (i) Quoted rates deemed to be inclusive fixing of cupboard on wall with appropriate wall plug/dash through fastener(hammer type) as per manufacturer's instructions. (ii) Fabrication and installation of cup board to be carried out through authorized dealer of manufacturers only.

S&F 18mm thick celuka PVC sheet minimum 600 Kg/Cum density, grade 1 quality of one side plain white colour rigidlam glossy finish fixed with screws, solvent cement/adhesive as per manufacturer’s instructions for making kitchen cabinet back complete as per specified and as directed by the Engineer-in-Charge. Make: M/s Rajshri Plastiwood Pvt Ltd/Sintex (or) any techno commercial equivalent as approved by GE Notes:- (i) Modular kitchen accessories i.e. basket, cutlery baskets, fittings, handles, hinges, will be measured and paid for separately as supply only under respective of this schedule. (ii) Quoted rate is deemed to be inclusive of fixing of cabinet on wall with appropriate rigid rawl plug/ dash through fastener (hammer type). (iii) Fabrication and installation of cabinet shall be carried out by authorized dealer of manufacturer only.

Dismantling floor hearth or wall tiling including cement mortar, bedding (but not backing), removing serviceable tiles and rubbish of the premises complete all as specified and directed.

Demolition of concrete in ground floors, paving or any position not exceeding 15 cm thick (below & above ground level) complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B-0 [Using 12.5 mm graded stone aggregate] as in leveling course as in floors complete all as specified and directed.

S&F Non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S&F Non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.

S&F glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles over and including a backing coat of 10 mm thick in CM 1:4 complete all as specified and directed.

S&F Homogenous vitrified dark shade, double charged, coloured floor tiles 10mm thick of polished premium quality, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm laid in floors, set and jointed with cement based adhesive as per manufacture's instructions to match with the colour of tiles with skilled workmen over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. Note:- Make and Shade of the tiles as approved by GE.

S&F Homogenous vitrified dark shade, double charged, coloured wall tiles 10mm thick of polished, premium quality, area of each tile exceeding 0.36 Sqm but not exceeding 0.42 Sqm fixed on vertical surfaces such as skirting, dado and risers to steps etc., , set and jointed with cement based adhesive as per manufacture's instructions to match with the colour of tiles with skilled workmen fixed over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed. Note:- Make and Shade of the tiles as approved by GE.

Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work/concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for complete removing of existing treatment on wall surfaces and applying two coats of oil bound distemper over and including a coat alkali resistant primer, over and including 1.5 mm thick layer of white wall care putty on wall surfaces to obtain smooth finish complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over and including a coat alkali resistant primer, over and including 1.5 mm thick layer of white wall care putty on wall surfaces to obtain smooth finish complete all as specified and directed.

Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and directed.

All as per Sl Item No. 20 above but exceeding. 1.5 Sqm and not exceeding 4 Sqm complete all as specified and directed.

S&F in repairs galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture1.18 mm fixed with tinned tacks or galvanized wire staple complete all as specified and directed.

S&F in repairs 19 mm dia stainless steel drapery rods, fancy type complete all as specified and directed. Make : Vista Cat Part No. SW-06 (or) any techno commercially equivalent make as approved by GE.

S&F in repairs curtain brackets stainless steel matching with/suitable to the curtain rods complete all as specified and directed. Make : Vista Cat Part No. SW-06 (or) any techno commercially equivalent make as approved by GE.

S&F venation blinds decorated vertical type 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall completed all as specified and directed. Make:- Vista [Ecoline vertical blinds] (or) any techno commercially equivalent make as approved by GE.

M&L 2nd class hard wood plain solid straight chowkats and frames rebated and put together with glue pinned joints complete all as specified and directed.

M&L Flush door shutter 35mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F mild steel flat iron as in hold fast etc and similar work complete all as specified and directed.

M&L PCC 1:3:6 type C1 [Using 20mm graded stone aggregate] as in anchoring hold fasts, bed plates, coping, cills etc weathering slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for preparing wooden surfaces of any description not otherwise described over 10 cm width or girth of new or previously untreated wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Floor door stopper of aluminium alloy body and tongue anodized with hard drawn steel spring, with overall length of cover plate 140mm complete all as specified and directed.

S&F 200mm long Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150m size extruded Aluminium handles fabricated type anodized complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised sliding door bolt with hasp staple (bolt type and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100mm size Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 15 mm size Bib tap long body with wall flange, fancy type, chromium plated, brass, screwed for 15mm bore iron pipe with capstain head complete all as specified and directed.

S&F in repairs one piece vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, toilet paper holder, health faucet, PVC connection, angular stop cock (valve) (2 Nos) with flange etc complete all as specified and directed. Make : Vitreous china wash down water closet (Pedestal Pattern) Cera Cat Part No. S1013132 - CURATOR (or) techno commercially equivalent model

S&F in repairs brass chromium plated bottle trap (32mm size with 300mm x 190 mm long wall connection pipes with wall flange) for wash hand basin, screwed for pipe including necessary packing, union and cap etc complete all as specified and directed.

S&F in repairs vitreous china wall hung wash hand basin with full pedestal snow white minimum size 630mmx450mm including chromium plated brass coupling, chromium plated brass centre hole basin mixer, 450 mm PVC braided connection (two numbers), angular stop cock ( valve) (two numbers) complete all as specified in particular specifications. Note : Vitreous china wall hung wash hand basin CERA Cat Part No. S2040112 CONCORD and chromium plated brass centre hole basin mixer Cera Cat part No F2002461 (or) Techno commercially equivalent model in Hindware/Jaquar/Parryware

S&F Chromium plated stainless steel (Grade S-304) (heavy) grating minimum 3 mm thick of size 125mm dia for trap complete all as specified and directed.

S&F Chromium plated stainless steel towel rail with lower hanger with hooks fixed to wall with chromium plated brass screws 600mm long between flanges complete all as specified and directed. Make: Jaquar Cat Part No. AHS-1581 (or) Techno commercially equivalent model in Hindware/Jaquar/Parryware

S&F in repairs vitreous china half stall urinal flat back size of with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste complete including providing and fixing plugs, bedding urinal against wall including 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating union for discharge pipe (exclusive of fixing supply pipe to flushing cistern, trap & including waste pipe) complete all as specified and directed. Make : Cera/Hindware/Jaquar/ Parryware

S&F in repairs 6mm thick bevelled edge looking mirror mounted on 6mm thick backing commercial plywood fixed with chromium plated plug with chromium plated brass screws and cup washer fixed on wall complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 120mm (minimum) wide with chromium plated brass bracket guard and railing 600mm long complete all as specified and directed.

S&F chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long) complete all as specified and directed.

Excavating in trenches, n. exc. 1.5m wide and n.exc.1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10Sqm on plan and n.exc.1.5m in depth and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M & L for hard core of not exceeding 63 mm gauge deposited, spread, and levelled in layers n exc 150 mm thick , watered and rammed to a true surface complete all as specified and directed.

S&F mild steel work in hollow structural pipes as in rafters/purlins and trusses special shaped washer including clamps and bolts complete using ERW or induction but welded tubes conforming to IS complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering to wall fixed with self tapping screws complete all as specified and directed.

M&L for 15 mm thick plastering in cement mortar 1:4 mixed with water proofing compound on roof slab finished even and smooth without using extra cement etc complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and directed

M&L for 15 mm thick rendering in cement mortar 1:4 on other than fair faces of brick or stone wall finished even and smooth without using extra cement etc complete all as specified and directed.

Supply only integral water proofing compound of approved make complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over and including a coat of alkali resistant primer complete all as specified and directed.

M&L for plain cement concrete 1:4:8, type D-2 (Using 40mm graded stone aggregate) as in foundations, filling, mass concrete or in floors complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C1 ( Using 20mm graded stone aggregate) for plinth protection or similar places, laid in alternate bays and filling the joints with and including bitumen and sand 1:3 by weight surface finished even and smooth without using extra cement complete all as specified and directed.

S&F mild steel for framed mild steel work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all specified and directed. Note : 12 mm square bar top sharp nose shall be provided.

M&L Flush door shutter 30mm thick, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 150mm long Aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F Non-skid/mat finish ceramic coloured joint free tiles of size 400 mm x 400 mm x 7 to 8mm thick (square / rectangular) as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for providing 35 mm thick precast cement concrete jallies 1:2:4, type B0 [Using 12.5 mm graded stone aggregate] measured solid including all mouldings but excluding frames set in cement mortor 1:4 complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed.

M&L mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of grade Fe-290 (Gde E-165) complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description over 10 cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and directed.

S&F Non-skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for preparation of old decorated surface of walls and applying one coat of oil bound distemper complete all as specified and directed.

Surface dressing not exceeding 15 cm deep in soft/loose soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 250 m but not exceeding 500 m and depositing at a level not exceeding 1.5 m from starting point complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver blocks with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade concrete laid over sand complete all as specified and directed. Note : Paver blocks shall be tested in NABL approved laboratory for grade of concrete and test certificate shall be produced by the contractor before incorporation in the work.

M&L for machine pressed precast concrete interlocking paver blocks with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade concrete laid over sand complete all as specified and directed. Note : Paver blocks shall be tested in NABL approved laboratory for grade of concrete and test certificate shall be produced by the contractor before incorporation in the work.

M&L for sand filling under floors or in foundations including leveling, watering and consolidation complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in bed blocks, copings, benching, kerbs and the like weathering slightly rounded or chamfered angles and throating etc including necessary formwork complete all as specified and directed.

M&L for 40 mm thick plain cement concrete 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and directed.

S&F Aluminium anodised powder coated any colour coating (Thickness of powder coating shall not be less than 50 micron) partition frames with one or more rebates aluminium section (Weight shall not be less than 0.55 Kg/RM) including necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beading screw aluminium anodized including 12 mm thick pre-laminated particle board exterior grade pre-laminated on both sides in bottom panels and 5 mm thick sheet glass in top panels with self closing hydraulic door closer and all necessary fittings/fixtures complete all as specified and directed.

Supply, laying and testing 15mm bore galvanised steel water tubing medium grade, with all fittings fixed to walls, ceilings, laid in floors complete all as specified and directed.

Supply, laying and testing 20mm bore galvanised steel water tubing medium grade, with all fittings fixed to walls, ceilings, laid in floors complete all as specified and directed.

S&F chromium plated grating 100mm dia (Minimum weight 60 grams) complete all as specified and directed.

S&F in repairs Vitreous china squating pan " Orissa pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) including P or S trap connection to trap, and to flushing pipe anti syphonoge pipe etc incl making good to floor complete all as specified and directed.

S&F10 ltrs capacity PVC low level valve less flushing cistern (white) syphonic action type with all fittings such as inlet ball valve, float, and handle 32 mm dia polythene high density flush pipe complete all as specified and directed.

S&F 15 mm size stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of bore of pipe 15mm complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) two layered ISI emossed hoisted and fixed in position including taking down complete all as specified and directed.

S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and directed.

Supply only waste fittings, brass, chromium plated for glazed ware basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed of bore of pipe 32mm complete all as specified and directed.

S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F of 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed

S & F in repairs 75mm PVC Nahani trap, setting and jointing with solvent cement and fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and directed

S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and directed

M&L Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends and making good cutting not exceeding 10cm girth for concealed water tubing or concealed conduit wiring, etc.complete all as specified and directed.

S&F in repairs towel rail 600mm long of aluminium fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 270 gms) complete all as specified and directed.

S&F Vitreous china wash basin, white, flat back, size 550mm x 400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and including fixing of the following components viz. pillar taps, waste fittings and union, plugs and chains and connecting upto supply pipes, wastes or traps, screws, plugs, cement mortar and other subsidary materials required for fixing including cutting for and pinning in ends of brackets but exclusive of fixing of supply and waste pipe fixed complete all as specified and as directed. Note: (a) Pillar taps and waste fittings as required shall be measured and paid for under supply only separately. (b) Supply and waste pipes as required shall be measured and paid for separately.

S&F vitreous china urinal, bowl type (back or corner wall type), complete including providing and fixing plugs,bedding urinal againsting wall in cement mortar 1:2,securing urinal to plugs with and including 60 mm long brass screws,pointing around urinal back in cement ,fixing automatic flushing cistern with brackets,flush pipe,complete all as specified and directed.

Excavation over areas not exceeding 1.5 mtr depth and getting out in soft/loose soil etc complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 in two layers [1st coat 10 mm thick and 5 mm thick] on fair faces of brick work/concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

S&F designer digital tiles exterior grade premium quality of any size and shape fixed on wall and floor and thickness of tiles is not less than 8 mm set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for applying two coats pidifin 2K mixed with cement in ration 1:1 as in flooring, walls, chajjas in cement in ratio 1:1 @ 1liter per Sqm with minimum interval of 4 hours in each coat, including 15 mm thick rendering in CM 1:4 complete including finished even & smooth without using extra cement complete all as specified and directed. Note: Make of chemical to Dr.Fixit.Gaurantee to be required from the Dr Fixit. All rates including the supply and applying Dr fixit chemical and work to be executed with authorised technician of Dr. Fixit

M&L for 20mm thick granite of any type and size machine cut including moulding, griniding & polishing of edges to give glossy finish as in flooring/skirting and wall lining lais over and including 15 mm thick screed bed/backing coat in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.

Supply of marble stone pebbles of size exceeding 50 mm and not exceeding 100 mm in any direction fully polished stones complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion. Notes :- (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provided at least 500 mm away from the earth pit and not on just on the earth pit and extra cost of additional length of water pipes and fittings junction etc is deemed to be included in the unit rate quoted. (iii) The unit rate quoted is deemed to be inclusive of cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire.

M&L for Sub main wiring with 2 runs of single core PVC insulated and PVC unsheathed, multi-stranded copper conductor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metallic suitable PVC conduit including all fittings and one run of PVC insulated and PVC unsheathed, multi-stranded copper conductor of nominal area 4 Sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Notes:- (a) Two runs of 6.0 Sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surfaces. .(c) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire

S&F Factory made sheet metal enclosure distribution boards, (Protection class IP-42) double door, vertical type suitable for mounting MCCBs/MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, Triple pole & neutral, 415 Volts, 12 ways complete all as specified and as directed. Note : MCCBs/MCBs will be measured and paid for separately under respective item of this schedule.

S&F polycarbonate distribution board UV resistant, shock, rust, dust proof, fire retardant comprising MCB SP & SPN 12 way including neutral and earth link front opening 240 volt, 50 Htz complete all as specified and directed. Make :- Legrand /ABB/Hager/Siemens/L&T

S&F MCCB, three pole, 415 Volt ,125 Amp rating, 35 KA ultimate breaking capacity fixed in DBs complete all as specified and as directed. Make : Legrand /ABB/Hager/Siemens/L&T

S&F MCB, SPN, 35 to 60 Amp rating, 230 volt, 'C' series fixed in DBs complete all as specified and as directed. Make : Legrand /ABB/Hager/Siemens/L&T

S&F MCB, SP, 6 to 32 Amps rating, 10 KA breaking capacity, 230 volt, 50 Hz, 'C' series fixed in DBs complete all as specified and as directed. Make : Legrand /ABB/Hager/Siemens/L&T

S&F MCB, SP, 35 to 63 Amps rating, 10 KA breaking capacity, 230 volts, 50 Hz, C series fixed in DBs complete all as specified and as directed. Make : Legrand /ABB/Hager/Siemens/L&T

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as specified and directed. Note :- (a) The unit rate quoted for this item is deemed to be inclusive of unscrewing of the serviceable fittings and fixtures as directed and deposit in MES store yard. (b) The unit rate quoted for this item cost of cutting chases for taking out concealed conduit and nitch for terminal box. (c) Decision of GE shall be final and binding in respect of serviceability of fittings/fixtures. (d) Exhaust fan and ceiling fan will be taken down separately under relevant item of this schedule.

M & L for point wiring with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 Sqmm FRLS (Nominal area) with stranded copper conductor 1100 volts grade drawn into and including rigid PVC conduit (concealed) 19 mm internal dia/bore with all PVC conduit fittings such as Tees, elbows, bends, reducers etc and 1.5 Sqmm unsheathed copper conductor earth wire connected to earth dolly including metal junction box , grid plate, base plate suitable for modular switches, sockets, regulators complete all as specified and directed. Note:- (i) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surfaces.(ii) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and Green for earth wire(iii) Switches & sockets will be measured and paid for separately (a) One light/fan/bell/exhaust fan point controlled by one switch single pole one way.

All as per Sl Item No. 114 above but one 3 pin 5 amp switch socket out let independent board.

All as per Sl Item No. 114 above but one 3 pin 5 amps socket outlet on the same board.

All as per Sl Item No. 114 above Modular switch socket outlet 6 Amps independent but below the switch board of lights points in the same vertical plane.

All as per Sl Item No. 114 above but using 02 runs 4.0 Sq mm FRLS with stranded copper conductor cable as phase and neural and 01 run of 4.0 Sq mm FRLS with stranded copper conductor cable as earth conductor for 3 pin 15 amps switch socket outlet/power point on independent board.

S&F switch modular flush type 6A single pole one way, one module ISI marked complete all as specified and directed.

S&F ceiling rose surface bakelite 60x25mm three terminals complete all as specified and directed.

S&F Modular switch socket outlet 2 in 1, 2/3 pin, 5 Amps complete all as specified and directed.

S&F Modular switch socket outlet 6A/16A- 2/3 pin, 2 module complete all as specified and directed.

S&F modular switch single pole, one way 16A, 230 volt complete all as specified and directed.

S&F Modular type electronic step type fan regulator 240 volts, 50 Htz, 120 watt (Switch/socket type in shape) complete all as specified and directed.

S&F 2 x 2 feet size 36 watt 240 volt 50 Htz sensor based LED luminaries with high transmitive diffuser suitable for indoor spaces aluminium housing complete all as specified and as directed. Make:- Havells Cat Part No. STRATO2XPLR36WLED840MOD (or) Philips Cat Part No RC380B LED36S-6500 G4 L60 W60 PSU OD (or) techno commercially equivalent model in Crompton/Wipro/Bajaj as approved by GE

S&F in replacement of existing defective energy efficient tube light fitting of 36/40/28 watt with LED light fitting of 20/21 watt integral sleek extruded polycarbonate LED channel with white acrylic cover wall mounted type complete with 20/21 wall LED tube complete all as specified and directed. Make : Philips Cat part No BN021C LED20S PSU CW GR S2 (or) Havells Cat Part No ENDURALINEARNEOBS20WLED865SPCWH (or) techno commercially equivalent model in Crompton/Wipro/Bajaj as approved by GE

S&F in replacement of existing defective energy efficient tube light fitting of 18/14 watt with LED fitting of 10 watt integral sllek extruded polycarbonate LED channel with white acrylic cover wall mounted type complete with 10 watt LED tube all as specified and directed. Make : Philips cat part No BN021 LED10S PSU GR S1 (or) Havells Cat Part No ENDURALINEARNEOBS10WLED865SPCWH (or) techno commercially equivalent model in Crompton/Wipro/Bajaj as approved by GE

S&F engagement light set of green & red fancy type including LED bulb 5 watt two Nos having light effect red & green, duly covered with perforated glass with fixing arrangement complete all as specified and directed.

S&F AC starter unit consisting of one 25 Amps capacity starter, one MCB SPN, 25 Amps, 240 volts, 10 KA, one 25 Amps socket and one 25 Amps plug top prewired complete all as specified and directed. Make : North West/Anchor / Legrand/L&T/Hager

S&F wall mounted touch free infra red hand dryer, auto cut made out of stainless steel comprising high speed motor 750 watt, 240 volts, air speed 92 m/s, hand dry time 7-10 second with 02 years warranty complete all as specified and directed. Make : Philips/Euronics/Havells

S&F high speed ceiling fan with down rod, canopy, blade 1200m sweep, 5 star rated lower power consumption made out of aluminium body double ball bearing, minimum two year warranty complete all as specified and directed. Make:- Crompton Greaves/Bajaj/Havells

S&F fresh air fan, AC single phase 230 volts of size 250mm sweep, plastic body with louvers and making of hole & grouting nut & bolts and connecting with 3 run of 1.5 sqm, single core, PVC insulated multi-stranded copper conductor FRLS cable from ceiling rose and making good the disturbed surfaces with existing colour matching complete all as specified and directed. Make : Havells cat Part No Ventil Air DX (or) techno commercially equivalent model in Orient/Khaitan/Crompton Greaves as approved by GE.

Supply, installation and testing of water heater storage type (Geysers) of capacity 25 liters, BEE 5 star rated with steel tank, ABS body, ISI Marked including pressure valve and making electric and water supply connecting complete over and including grouting nut and bolts 100mm x 15mm for hanging the geyser and plastering and finishing of disturbed surfaces of wall as per existing finish complete all as specified and directed. Make : Bajaj/ Havells / Racold/ Crompton

Fixing only split AC unit [Indoor and outdoor units] of 2.0 ton capacity all as required including necessary connections complete all as specified and directed . Note :- Split AC unit (Indoor & out door units ) will be issued under Sch 'B' free for fixing

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled outdoor type, built-in thermal overload Protection, Low & High Voltage cut-off Protection & designed for input variation between 150 V to 285 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA complete all as specified and directed. Make: V GUARD(Model No: VND500) / BLUEBIRD(Model No:BA514A) (or) techno commercially equivalent model ISI marked as approved by GE

S & F Sheet metal enclosure with socket plug top and MCB single pole neutral enclosure with 2 pin + earth plug and socket complete with one MCB SP 25 amps 240 volts complete all as specified and directed. Make : Legrand /ABB/Hager/Siemens/L&T

S&F wall mounted fan, copper wound winding of 400mm sweep, 230 Volt, 50 Hz complete with fixing arrangements complete all as specified and directed. Make : Havells Model No. Platina HS (or) techno commercially equivalent model in Bajaj/Usha/Crompton Greaves as approved by GE.

S&F LED new generation energy efficient bollard light 8 watts IP65, cone series acts as an a imposing street furniture complete all as specified and directed. Make : Havells Model No. CONEBLS8WLED757PSYMTOPC(0.60 M) [or] techno commercially equivalent model in Philips/Crompton/Wipro/Bajaj as approved by GE.

Point wiring using approved colour coding as per IS, with Zero Halogen Flame retardant (HFFR), smoke free, non toxic, non corrosive installation cable with UNILAY construction copper conductor 1.5 Sq. mm (nominal area), single core, insulated and unsheathed stranded cable 1100 Volts grade ISI-694 marked & including heavy duty, electric resistance welded(ERW) stove enamelled surface mounted conduit, heavy duty ISI marked as per IS:9557 (Part I) 1980 for light points controlled by one Switch , including HFFR insulated unsheathed unitary construction copper conductor 1.5 Sq. mm nominal cross sectional area wire as earth continuity conductor up to common earth and connecting to earth dolly complete all as specified and directed. Note :- (i) All conduit accessories such as bends, elbows, Tee etc shall be flame proof certified by CMRS, Dhanbad. (ii) The unit rate is deemed to be inclusive of All conduit accessories such as bends, elbows, Tee etc.

S&F Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

S&F Flame proof LED light 20 watts, surface mounting, CMRI certified recommended for gas/vapour group IIA & IIB and zone 1 & 2, die cast aluminium body, complete all as specified and directed. Make : Crompton Cat Part No.EXTNLT8-16/20 [or] techno commercially equivalent model in Philips/Havells/Wipro/Bajaj as approved by GE.

S&F Factory made, FLAME PROOF sheet metal enclosure distribution board, double door type, suitable for mounting MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, Single pole & neutral, 4 ways, 220 Volts complete all as specified and as directed. Note : MCBs will be measured and paid for separately under respective item of this schedule.

Excavation in hard standing for crossing the road as per the authorized width for taking out/laying/cleaning/repairing of CI/GI pipe lines all as directed including making good the road cut to match with the existing surface either with bituminous macadam or with PCC 1:2:4, type B-2(using 40mm graded crushed stone aggregate) complete all as specified and directed.

Taking up unserviceable 150mm bore CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes:-. (Earth work shall be measured and paid separately).

Taking up unserviceable 100mm bore CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes:-. (Earth work shall be measured and paid separately).

Taking up unserviceable 80mm bore CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes:-. (Earth work shall be measured and paid separately).

Taking up unserviceable 150 mm bore CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes:-. (Earth work shall be measured and paid separately).

Taking up unserviceable 100 mm bore CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes:-. (Earth work shall be measured and paid separately).

Taking up unserviceable 80 mm bore CI/DI rusted/ broken pipe line (including all fittings) with spigot and socket/ Flanged ends and removal from site including burning out joints and recovering lead complete all as specified and directed for the following sizes/bores of pipes:-. (Earth work shall be measured and paid separately).

Supply & laying 150 mm bore in trenches ductile iron (DI) pipe with spigot and socketed ends centrifugally cast class 'K-7' in any length laid in trenches complete all as specified and directed for the following sizes/bore of pipes (DI fittings and jointing materials shall be measured and paid separately) :-

Supply & laying 100 mm bore in trenches ductile iron (DI) pipe with spigot and socketed ends centrifugally cast class 'K-7' in any length laid in trenches complete all as specified and directed for the following sizes/bore of pipes (DI fittings and jointing materials shall be measured and paid separately) :-

M&L for cutting of the CI/DI pipe of 150 mm bore in position for insert of new tee, branches such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc.with suitable size of clamp of size 40 x 6 mm with nuts, bolts and washer of the following sizes complete all as specified and directed:-

M&L for cutting of the CI/DI pipe of 100 mm bore in position for insert of new tee, branches such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc.with suitable size of clamp of size 40 x 6 mm with nuts, bolts and washer of the following sizes complete all as specified and directed:-

M&L for cutting of the CI/DI pipe of 80 mm bore in position for insert of new tee, branches such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc.with suitable size of clamp of size 40 x 6 mm with nuts, bolts and washer of the following sizes complete all as specified and directed:-

M&L for rubber gasket joint suitable for 150 mm dia DI pipe and fittings with size of nuts, washer & bolts etc complete all as specified and directed.

M&L for rubber gasket joint suitable for 100 mm dia DI pipe and fittings with size of nuts, washer & bolts etc complete all as specified and directed.

M&L for upto 150mm bore cast iron (CI) fittings such as bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, “Y” junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

M&L for upto 150mm bore Ductile (DI) fittings such as bends (any type, radius and angle) tapers any type,(straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, “Y” junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs complete all as specified and directed.

Taking up or down 80 mm bore steel water tubing and connections including clearing the pipes free from scaling for reusing the same complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately

Taking up or down 50 mm bore steel water tubing and connections including clearing the pipes free from scaling for reusing the same complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately

Taking up or down 40 mm bore steel water tubing and connections including clearing the pipes free from scaling for reusing the same complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately

Taking up or down 25 mm bore steel water tubing and connections including clearing the pipes free from scaling for reusing the same complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately

Taking up or down 20 mm bore steel water tubing and connections including clearing the pipes free from scaling for reusing the same complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately

Taking up or down 15 mm bore steel water tubing and connections including clearing the pipes free from scaling for reusing the same complete all as directed for the following sizes :- Note :-Excavation will be measured and paid separately

Relaying/ refixing of old steel tubing of 80 mm bore and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc all as specified and directed

Relaying/ refixing of old steel tubing of 50 mm bore and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc all as specified and directed

Relaying/ refixing of old steel tubing of 40 mm bore and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc all as specified and directed

Relaying/ refixing of old steel tubing of 25 mm bore and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc all as specified and directed

Relaying/ refixing of old steel tubing of 20 mm bore and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc all as specified and directed

Relaying/ refixing of old steel tubing of 15 mm bore and connection in new or old position including necessary cuttings, threading, and new fittings such as bends, elbows, socket nipples, tapers, and reducers etc all as specified and directed

Supply and lay 80 mm bore steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.

Supply and lay 50 mm bore steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.

Supply and lay 40 mm bore steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.

Supply and lay 25 mm bore steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.

Supply and lay 20 mm bore steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.

Supply and lay 15 mm bore steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately.

S&F 50 mm dia Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down complete all as specified and directed.

S&F 40 mm dia Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down complete all as specified and directed.

S&F 25 mm dia Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down complete all as specified and directed.

S&F 20 mm dia Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down complete all as specified and directed.

S&F 15 mm dia Gun metal gate valve ISI marked with iron wheel head screwed both ends for iron pipes including taking down complete all as specified and directed.

S&F in repair Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm complete all as specified and directed.

S&F 15mm dia bib tap brass or cast copper alloy with crutch handle screwed down screwed for iron pipe including taking out unserviceable tape of 15mm dia complete all as specified and directed.

Supply, fixing, jointing and testing in repairs 150 mm dia of cast iron sluice valve class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed.

Supply, fixing, jointing and testing in repairs 100 mm dia of cast iron sluice valve class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed.

Supply, fixing, jointing and testing in repairs 80 mm dia of cast iron sluice valve class I (ISI MARKED) PN-1 type latest IS 14846-2000 flanged ends, drilled having stainless steel spindle with cast iron wheel head at top complete with nuts, bolts, washer and rubber gasket etc complete including taking down unserviceable sluice valve complete all as specified and directed.

Dismantling old broken / damaged valve pit chamber and Construction of new valve pit chamber of size 1050mm x 1050mm x 1050mm (internal dimention) complete including excavation and earth work, PCC 1:4:8, type D-2 using 40mm graded stone aggregate, brick work in cement mortar 1:6, plastering in cement mortar 1:4 (internally) and including 3mm thick mild steel sheet cover and painting with two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

All as per item No 187 above but size of valve chamber is 900 x 900 x 900 mm (internal) and all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.