REPAIR TO PLASTERING, FLOORING, JOINERY TILING IN TOILET, KITCHEN, PLUMBING, SANITARY FITTINGS AND ALLIED WORKS IN OFFICERS MD ACCN UNDER AGE B/R-I OF GE (N) MEERUT CANTT

Amount

Taking down old existing water proofing treatment from the top of RCC/ arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as specified and directed.

M&L for nominal mix concretes 1:2:4 type B-O(using 12.5 mm graded stone aggregates) as in Leveling coures / padding on roof finished even and fair without using extra cement complete all as specified and directed.

M&L for 10mm thick cement paster in CM 1:4 mixed with WPC @ 2 % by weight of cement finised even and smooth without using extra cement on roof surface when concreate is green and wall complete all as specified and directed. Note: -WPC will be measured and paid seperately as supply only rate.

Cutting grooves in brick/ concrete wall 75 mm wide and 65 mm deep and shaping horizontal face of groove and making good disturbed surface in CM 1:3 after inserting APP membrane (Chasing shall be cut where height of parapet wall is more than 300mm.) complete all as specified & directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for cleaning of concrete or plastered surfaces of roof and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed evenly by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with 3mm thick APP modified polymeric water proofing membrane reinforced with non-woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified and directed. (including existing water tank on roof disconnected and after cleanig same position connecting).

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.all as specified and directed.

M&L brick work with sub class fly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed.

Taking down of cement plaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L 15 mm thick rendering in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified and directed.

M&L 15 mm thick rendering in two layers on fair faces of brick or concrete surfaces first layers 10 mm thick with cement mortar 1:6 on fair faces of brick work or concreate surfaces and second layers 5 mm thick with cement mortar 1: 4 with mixing of water proofing compound as per manufactureer's instruction complete all as specified and directed. Note:-Water proofing compound shall be measured and paid sepratly

M&L rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3) complete all as specified and directed.

M&L preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified and directed.

M&L preparation of new plastered surface of wall by applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified and directed.

M&L Preparation of new plastered surface of ceiling and applying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper over one coat of primer using roller for painting complete all as specified and directed.

M&L preparation of Complete removal of existing treatment plastered old surface of of wall by applying 3mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)using roller for painting complete all as specified and directed.

M&L preparation of Complete removal of existing treatment by mechanical means plastered old surface of wall and applying 3mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified and directed.

M&L preparation of Complete removal of existing treatment by mechanical means plastered old surface of ceiling and applying 3mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of oil emulsion distemper using roller for painting complete all as specified and directed.

Dismantling structural/framed steel work of any description as in purlin, rafter,grills, grating & doors etc complete all as specified and directed.

M&L for in repair framed work such as grills, gratigs, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for M-25 cement concrete 1:2:4 type B1 (using 20mm graded stone aggegrate) as in any position and all neccesary formwork & finishing exposed concrete surface complete all as specified and directed.

Demolition of cement concrete (Un reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified and directed.

M&L plain cement concrete Type B-0, 1:2:4 (12.50mm graded aggregate), 25 mm thick as in sub-base of floors complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store andd rubbish off the premises complete all as specified and directed.

M&L non-skid coloured ceramic tiles 7 to 8 mm thick square/ rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in loors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.

M&L for glazed ceramic coloured tiles of size 350X250X7mm/450mm x 350mm x 7mm on vertical surface such as skirting, dados, risers to steps etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including rendering 10mm thick in cement mortar (1:4), complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for rounding to edges of stone slabs two edge full round, such as in steps,cooking platform and other similar situation complete all as specified and directed.

Taking down chowkhat or frames of door/ window with shutters (Without taking off shutter from the frame) exc 1.50 m and n.exc 4.00 Sqm each complete all as specified and directed.

M&L for anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for anodised aluminium powder coating of approved colour (Thickness or powder coating not less than 50 micron) sliding window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium complete fittings as required complete all as specified and directed.

S&F for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid Moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary stainless steel screws shall be paid separately)

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F 35 mm thick 1st class softwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F glazing with sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

S&F 100 mm butt hinges, medium weight brass complete all as specified and directed.

S&F brass barrel tower bolt 200 mm, extruded section complete all as specified and directed.

S&F for 125mm Extruded brass handles,fabricated type polished complete all as specified and directed.

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete all as specified and directed.

S&F, mortice lock, brass, four lever, verticle type, size 75mm complete all as specified and directed.

S&F in repair, aluminium (die cast) body, door closer, hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Dismantling wall and ceiling boards(fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.

M&L in repair, 18/19mm thick Soild WPC board, exterior grade, prelaminated one side with decorative choice laminations and other side balanceing white lamination, fixed with screws to WPC frame work in cup boards, rebated or flat edged fancy handle , Magnite lock ,brass knob as per site required etc and complete all as specified and directed.

M&L for stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen cutlery tray/basket with complete sliding Arrangement fixed kitchen cabinet fram complete all as specified and directed. (01 Nos)

M&L for stainless steel basket size (15 inch X 20 inch X 6 inch) for modular kitchen tray/basket with complete sliding Arrangement fixed Kitchen cabinet fram complete all as specified and directed. (01 Nos)

M&L for stainless steel basket size (15 inch X 20 inch X 8 inch) for modular kitchen crockery tray / basket with complete sliding Arrangement fixed kitchen cabinet fram complete all as specified and directed. (01Nos)

M&L for stainless steel basket size (15 inch X 20 inch X 10 inch) for modular kitchen grain troIIy basket with complete sliding arrangement fixed kitchen cabinet fram complete all as specified and directed. (01 Nos)

M&L for stainless steel basket size (15 inch X 20 inch X 4 inch) for modular kitchen tray / basket with complete sliding arrangement fixed kitchen cabinet fram complete all as specified and directed. (01 Nos)

S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.

S&F glazing with sheet, 4mm thick, ordinary quality and glazing with oil putty and glazing pins in squares exceeding 0.5 Sqm in each pane complete all as specified and directed.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.

Supplying and laying of CPVC 16mm outer dia pipes SDR 11and plain CPVC SDR 11 , with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Supplying and laying of CPVC 20mm outer dia pipes SDR 11 and plain CPVC SDR 11 , with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

S&F in repairs 15mm brass chromium plated bib cock with wall flange complete all as specified and directed. Make - Jaquar (Cat No- 5041) or equivalent complete all as specified and directed.

S&F angle valve 15mm bore brass chromium plated with captan head screwed for iron pipe complete all as specified and directed.

S&F 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstan head complete all as specified and directed.

S&F 15mm dia chromium plated fancy type wall mixer with over head shower for mixing hot and cold water screwed , fixing and connection to pipes complete all as specified and directed. Make: Cera Cat Part No F-1017401, Pearl Cat Part No ARI-015, Hindware Cat Part No. F740022

S&F PVC connection 15 mm size with PTMT nuts 450 mm long complete all as specified and directed.

S&F PVC Bath cabinet with mirror 18"x22"x4.25". Make: commander or equivalent complete all as specified and directed.

S&F in repairs chromium plated towel rack of size 24" complete all as specified and directed. Make - Jaquar or equivalent (Cat No-1181) or equivalent.

S&F in repair vitreous china ware EWC combined pattern complete with internal fittings as specified and directed by Engineer-in-Charge. Make : Cera of Cat Part No S101314L or equivalent in Parryware/ Hindware.

S&F for CP health faucet brass body with wall hook and one meter stainless steel braided rubber hose pipe complete all as specified and directed. Cat Part No.CERA F8030301.

S&F vitreous china wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed.

S&F in repair, vitreous china wash down water closet pan (Pedestal pattern), white with 'p' or 's' trap (excluding flushing cistern and flush pipe), including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. complete all as specified and directed.

S&F in repair super special colours vitrous china wash hand basin white flat back, size 580x430mm including waster pipe , chromium plated waste coupling 32mm dia , with pedestal / bracket etc complete all as specified and directed. Cat part No. 1019A & 1109A Padestal.

S&F only PVC low level flushing cistern 10 litre capacity valveless syphonic action type white i as approved including ball valve float valve and handle,32 mm dia flush pipe complete all as specified and directed.

S&F stainless steel fancy type curtain rod, 25 mm dia fixed with braket, including taking down of old curtain rods complete all as specified and directed.

Toilet paper holder of brass chromium plated conforming to the samples kept in the office of GE complete all as specified and directed.

S&F sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, CP waste coupling, waste pipe and including in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and directed.

S&F in repair 1mm thick, stainless steel plate rack of size 1200mm x 900mm x 180mm complete all as specified and directed.

Sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long, fixed in repair complete all as specified and directed.

S&F in repair corner glass shelf with bracket complete all as specified and directed. Make- Jaquar (Cat No- 1173) or of equivalent make as approved by GE.

S&F in repair brass chromium plated soap dish complete all as specified and directed. Make- Jaquar (Cat No- ACN-1131N) of catalogue or of equivalent make as approved by GE.

S&F for waterfall/rain over head Shower SS 304 with water fall 550x 230mm size Cat Part CERA No F7010107SS complete all as specified and directed.

Dismantling of cast iron, PVC or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required for 110mm and 75mm bore of pipe complete all as specified and directed.

S&F in repair ,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls including stack clamp complete all as specified and directed.

S&F in repair ,110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints laying as in floor and complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, 110mm bore, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair PVC (SWR) junction single, (Single T) equal or unequal provided with access door 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bends 110mm bore any radius complete all as specified and directed.

Agastya Constructions

Shikha Enterprises

M/S ABHI ASSOCIATES

High Tech Metal India

Manglam Engineers and Construction Co

VIRAT CONSTRUCTIONS