Repairing and renovation of power wiring with allied works at P.H. no. II, Zone-I of Dakshin Chatra Ground water based W/S Scheme under EMSD-I, PHE Dte.in 24Pgs(N).

Amount

Supply & delivery at site of 100 Amp kit kat rewireable. ( Make Havells/ L&T/ Standard/any other approved make)

Supply & delivery at site of 100 Amp TPN Rewire able type switch fuse. ( Make Havells/ GEC/ Standard/any other approved make)

Supply & delivery at site of 100Amps wall mounted 4-way Bus-Bar chamber having 4nos. Copper bus-bar. ( Make Havells/ L&T/ Standard/any other approved make)

Supply & delivery at site of 100 Amp. 4 pole on load change over switch. ( Make Havells/ Standard/any other approved make)

Supply & delivery at site of 35 Sq. mm. 1.1 KV grade 3 1/2 core Al. conductor armoured P.V.C. /XLPE insulated cable. NB: Cable to be supplied as per sire requirement. ( Make: GLOSTER/NICCO/Polycab / Havell’s/Mescab)

Fitting, fixing of main switch & bus-bar as in item no. 1 to 4 on flat iron frame/angle iron frame on wall by supplying all necessary fixing materials including welding all complete as per direction.

Laying of cable as in item no.5 on wall/surface including S&F of MS saddles with earthing attachment in 10 SWG GI(HOT DIP) wire making holes etc. as necessary mending good damages and paint all complete.

Finishing the end of cable by crimping method including supplying of suitable size Al. thimble, tapes, jointing materials & supplying and fixing suitable type compression gland for above cable including supply of brass gland, rubber ring etc.

Earthing with 50mm dia. G.I. pipe 3.64mm thick x 3Mtr.(10ft.) long and 1 x 4SWG G.I. wire(4Mtr. long) 13mm diametre x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F 15mm diametre G.I. pipe protection(1Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed.[This cost includes earth pit and its necessary lid making]

Extra for treatment of soil by salt and charcoal coke for pipe electrode.

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.

Brick work around the earth pits, neat cement finishing, supply & fitting fixing of MS cover plates above the earth pits all complete as per satisfaction of E.I.C.

Painting the delivery pipe line , valves ,specials with 2 coats of anticorrosive paint after scrapping out the old paint and rust .

Carrying the defective 30KVA stabilizer set from site to workshop(FIJI) after disconnection of electrical connection including loading and unloading all complete..

Dismantling the damaged & defective materials part by part after detection of fault by engaging skilled electrician as per direction of E.I.C. (For 04 nos. Voltage Stabilizer)

Supply ,delivery at site of Double display Servo card.

Supply ,delivery at site of 80A TP MCCB.

Supply ,delivery at site of 63A TP MCB.

Supply ,delivery at site of Digital Voltmeter.

Supply ,delivery at site of Cam switch.

Supply ,delivery at site of Standby switch.

Supply ,delivery at site of Momentry switch.

Supply ,delivery at site of SPDT switch.

Supply ,delivery at site of RC for motor.

Supply ,delivery at site of Indicating Lamp

Supply ,delivery at site of 250A Terminal

Supply ,delivery at site of 100mm sweep 230 volts Cooling fan.

Supply ,delivery at site of Cabinet for 30KVA Voltage stabilizer.

Supply ,delivery at site of Wheel for 30KVA Voltage stabilizer.

Supply ,delivery at site of Transformer Oil.

Fitting fixing of above supplied materials as in item no.16 to 31 with supply of necessary wire, hardware & wiring materials including servicing, testing, Commissioning the Voltage Stabilizer upto entire satisfaction of E.I.C. (For 3nos. Voltage Stabilizer)

Carrying the repaired 30KVA stabilizer set from workshop(FIJI) to site including loading and unloading all complete and reinstallation of same in its existing position.

Supply fitting fixing of (0 -07 Kg/cm2) Pressure gauge complete set. Make - H.Guru/approved make.

Making internal/external electrification of P/House by 2 x 1.5 sq.mm. P.V.C. cu wire through suitable size casing/capping for 4 nos. point ( 1 no. bracketpoint , 1 no. tube light point , 1 nos. bulk head point and 1 fan point ) and 1 no. 5A ,5 pin plug point with earthing attachment of 1 x 1.5 sqmm cu. Wire with supplying of tube light fittings , bulbs & 1200mm sweep celling fan(Make-As per approved vendor list.) as per approved make including suppying and fixing 10 A. DP MCB (As per approved vendor list.) make on wall all complete as per I.E. rules and direction. (including making external illumination by Supply & fixing of 1 no. 40W LED IP 66 type outdoor luminairie incl. Supply & installation of MS bracket & connection complete) (Make : As per Approved Vendor List.)

Making rain protection shed on the cut out of roof of Pump House by supplying and fixing of suitable sheet as per direction of EIC. Size -1.5Mtrs x 1.5 Mtrs.

Testing, Commissioning the whole installation upto entire satisfaction of E.I.C.

Add: GST @ 18%

Add: Cess @ 1%

KUNDU ELECTRICAL ENTERPRISE (BID ID -6381284)

KARTICK BAL (BID ID -6386727)